Commit Graph

265 Commits

Author SHA1 Message Date
Peter Wemm
b6c8407840 Get out the roto-rooter and clean up the abuse of nexus ivars by the
i386/isa/pcibus.c.  This gets -current running again on multiple host->pci
machines after the most recent nexus commits.  I had discussed this with
Mike Smith, but ended up doing it slightly differently to what we
discussed as it turned out cleaner this way.  Mike was suggesting creating
a new resource (SYS_RES_PCIBUS) or something and using *_[gs]et_resource(),
but IMHO that wasn't ideal as SYS_RES_* is meant to be a global platform
property, not a quirk of a given implementation.  This does use the ivar
methods but does so properly.  It also now prints the physical pci bus that
a host->pci bridge (pcib) corresponds to.
2000-09-28 00:37:32 +00:00
Peter Wemm
4d8ea19f7c Catch a few more bogosities in certain chipsets before they mess us up.
Some have dual host->PCI bridges for the same logical pci bus (!), eg:
some of the RCC chipsets.  This is a 32/64 bit 33/66MHz and dual pci
voltage motherboard so persumably there are electical or signalling
differences but they are otherwise the same logical bus.
The new PCI probe code however was getting somewhat upset about it and
ended up creating two pci bridges to the same logical bus, which caused
devices on that logical bus to appear and be probed twice.

The ACPI data on this box correctly identifies this stuff, so bring on
ACPI! :-)
2000-09-05 00:53:34 +00:00
Peter Wemm
280b4748af Take a shot at fixing multiple pci busses on i386.
pcib_set_bus() cannot be used on the new child because it is
meant to be used on the *pci* device (it looks at the parent internally)
not the pcib being added.  Bite the bullet and use ivars for the bus
number to avoid any doubts about whether the softc is consistant between
probe and attach.  This should not break the Alpha code.
2000-08-31 23:11:35 +00:00
Doug Rabson
21c3015a24 * Completely rewrite the alpha busspace to hide the implementation from
the drivers.
* Remove legacy inx/outx support from chipset and replace with macros
  which call busspace.
* Rework pci config accesses to route through the pcib device instead of
  calling a MD function directly.

With these changes it is possible to cleanly support machines which have
more than one independantly numbered PCI busses. As a bonus, the new
busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
Mike Smith
2a50a6d730 Add PnP probe methods to some common AT hardware drivers. In each case,
the PnP probe is merely a stub as we make assumptions about some of this
hardware before we have probed it.

Since these devices (with the exception of the speaker) are 'standard',
suppress output in the !bootverbose case to clean up the probe messages
somewhat.
2000-06-23 07:44:33 +00:00
Jun Kuriyama
569e965893 Add OPTi 82C700 chipset.
Submitted by:	sanpei@sanpei.org
PR:		kern/18155 (part of)
2000-05-24 09:03:30 +00:00
Jun Kuriyama
3cc13eb5b1 Add 440MX chipset.
Submitted by:	YOSHIMURA Hideaki <hideakiy@cs-tokyo01.chuosystem.co.jp>
References:	[bsd-nomads:13764]
2000-05-24 02:24:38 +00:00
Mike Smith
ac9b3dacb2 Don't assume that the PCI BIOS is going to clear the unused bits in %ecx
when it returns.
2000-05-04 17:44:55 +00:00
Mike Smith
300451c472 Some more i386-only BIOS-friendliness:
- Add support for using the PCI BIOS functions for configuration space
   accesses, and make this the default.

 - Make PNPBIOS the default (obsoletes the PNPBIOS config option).

 - Add two new boot-time tunables to disable each of the above.
2000-04-16 20:48:33 +00:00
Doug Rabson
ac19291f35 Add a workaround to allow us to detect the second pci bus on an HP
Netserver LS/2.

Approved by: jkh
2000-02-23 20:25:06 +00:00
Doug Rabson
9a1498a435 Fix an uninitialised variable which affected probing on some machines.
Approved by: jkh
Reviewed by: gallatin
2000-02-13 09:49:05 +00:00
Andrew Gallatin
da4009202a Allow allows peer pci buses which are directly connected to the RCC host pci
chipset to be probed & attached on newer Dell PowerEdge servers, such as
the 2400 and 4400.

Reviewed by: 	dfr, msmith, jlemon
Tested by:	hnokubi@yyy.or.jp (in a previous incantation)
Approved by:	jkh
2000-02-09 20:05:30 +00:00
Nick Hibma
4f2e8d6383 Add PCI Id's for i810 chipsets.
PR:		16517
Submitted by:	SAKIYAMA Nobuo <sakichan@lares.dti.ne.jp>
Approved by:	jhk
2000-02-07 12:50:33 +00:00
Peter Wemm
4a1e4cb727 Clean up the cfgmech/pci_mechanism debris. The reason for the existance
of this is no longer an issue as we have a replacement driver for the
one that needed it.

Reviewed by:	dfr
2000-01-08 08:31:24 +00:00
Doug Rabson
c954d7368a Don't use a bogus bus number for Ross host-pci bridges.
PR:	kern/15278
Submitted by: Ahmed Benani <ahmed_benani@urbanet.ch>
1999-12-05 18:41:34 +00:00
Matthew N. Dodd
fe0d408987 Remove the 'ivars' arguement to device_add_child() and
device_add_child_ordered().  'ivars' may now be set using the
device_set_ivars() function.

This makes it easier for us to change how arbitrary data structures are
associated with a device_t.  Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.

Despite my best efforts I've probably forgotten something so let me know
if this breaks anything.  I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.

Reviewed by:	peter, dfr
1999-12-03 08:41:24 +00:00
Peter Wemm
cde35e1a3d If we have found pci devices via pci_cfgopen(), but don't find a
host->pci bridge specifically, then add a pcib0 device on the motherboard
for the pci bus to hang off.

Requested by:  Anders Andersson <anders@sanyusan.se>
Obtained from: dfr
1999-11-18 08:58:37 +00:00
Alan Cox
eab7cc95c4 Add text for the AMD-751 host-to-PCI and PCI-to-PCI (AGP) bridges. 1999-10-25 06:28:04 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Peter Wemm
f3b63bd388 Make the identify routine add itself with priority 100 to make sure it
goes after the npx/apm devices and any other motherboard devices that
may get added down the track.
1999-08-22 19:54:11 +00:00
Peter Wemm
accc665bbe Hopefully fix the previous commit, it caused *all* bridges to be detected
as PCI->HOST bridges on my (440BX) box.

My change is to remove the test at the beginning entirely, letting the
switch on the device ID happen first.  If the device ID is unknown, then
(in the default case) check for the generic PCIS_BRIDGE_HOST tag.  This
should allow wierd cases (eg: wpaul's IMS VL bridge) to work by using the
id override.  This strategy is more in line with the other PCI match
methods we use elsewhere,

I only have a limited testbed, but having my USB etc devices detected as
PCI->HOST bridges doesn't look good.
1999-08-10 09:22:21 +00:00
Bill Paul
d9d628b000 Fix nexus_pcib_is_host_bridge() so that it detects my 486's PCI bus
correctly. It has the following code:

        if (class != PCIC_BRIDGE || subclass != PCIS_BRIDGE_HOST)
                return NULL;

My 486 has an Integrated Micro Solutions PCI bridge which identifies
itself as subclass PCIS_BRIDGE_OTHER, not PCIS_BRIDGE_HOST. Consequently,
it gets ignored. In my opinion, the correct test should be:

        if ((class != PCIC_BRIDGE) && (subclass != PCIS_BRIDGE_HOST))
                return NULL;

That way the test still succeeds because the chip's class is PCIC_BRIDGE.
Clearly it's not reasonable to expect all host to PCI bridges to always
have a subclass of PCIS_BRIDGE_HOST since I've got one that doesn't.
This way the sanity test should remain relatively sane while still allowing
some oddball yet correct hardware to work. If somebody has a better way
to do it, go ahead and tweak the test, but be aware that
class == PCIC_BRIDGE and subclass == PCIS_BRIDGE_OTHER is a valid case.

While I was here, I also added an explicit ID string for the IMS chipset.
I also dealt with a minor style nit: it's bad karma not to have a default
case for your switch statements, but the one in this routine doesn't have
one. The default string of "Host to PCI bridge" is now assigned in a
default case of the switch statement instead of initializing "s" with the
string before the switch and then not having any default case.
1999-08-09 21:12:18 +00:00
Peter Wemm
cac6a04400 Don't probe if pci_cfgopen() fails to find pci hardware, like we used to
to.  This might have caused interesting things on non-PCI hardware if
PCI was compiled in.
1999-08-04 13:38:24 +00:00
Mike Smith
850013034a Add support for multiple PCI busses directly connected to the nexus.
This is only partially complete, but allows 450NX-based systems with
more than one PCI bus to be used again.

Submitted by:	dfr
1999-07-16 01:00:30 +00:00
Peter Wemm
8dc26439da Move pcibus (host -> pci bus) probe/attach routines from nexus
to pcibus.c.  pci_cfgopen() becomes static and there are no more
bus #ifdef's in nexus.c.
1999-05-18 20:48:43 +00:00
Stefan Eßer
8277ac255e Make the class code checks in function pci_cfgcheck less strict.
It failed to recognize the PCI bus in a system that had only an
old chip-set (class code 000000) and a Cyclom multiport serial
card on PCI bus 0, but no VGA card or disk or network controller.

PR:		i386/5300
Submitted by:	Nickolay N. Dudorov <nnd@itfs.nsk.su>
1997-12-20 09:04:25 +00:00
Bruce Evans
f71d35e402 Removed unused #includes. 1997-07-20 14:10:18 +00:00
Stefan Eßer
b3daa02e72 Yet another fix for configuration mechanism 1 register accesses:
Adjust the data port address by adding the two low order bits of
the register number. The address port takes only a word address
(i.e. ignores the two low order bits written to it).
1997-05-26 21:52:41 +00:00
Stefan Eßer
64039d403f Fix previous fix: The enable bit is bit 31 (0x8000000) and not bit 15. 1997-05-26 21:25:24 +00:00
Stefan Eßer
e0c57a9615 Set enable bit when writing the configuration address in configuration
mode 1. Omission of this bit makes all config register accesses fail in
on recent chip sets ...

(The problem was reported and debug output provided by: Steve Passe)
1997-05-26 21:11:05 +00:00
Stefan Eßer
5bec615793 Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .

The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...

This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.

A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:

1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
   and are probed like any "standard" PCI device.

The following features are currently missing, but will be added back,
soon:

1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets

This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Stefan Eßer
5c03639065 Mask out revision register in consistency test of class register. 1997-04-09 11:34:50 +00:00
Stefan Eßer
6df09d1e0b Fix spelling of align and interrupt in comments. 1997-04-09 09:16:27 +00:00
Stefan Eßer
b4b8847934 Fix consistency test to not fail on pre PCI 2.0 motherboards 1997-04-09 09:15:03 +00:00
Stefan Eßer
81cf5d7aae improve pcibus_check: Only assume PCI if at least one PCI to anything bridge
on bus 0.
This fixes problems with EISA-only systems mistakenly being assumed to support PCI.
1997-03-05 20:52:00 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Bruce Evans
4123678332 Sync with <pci/pcibus.h>. pcibus.c unfortunately still compiled (with
only 3 or 4 warnings) when pb_maxirq went away.
1997-01-25 18:51:01 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Nate Williams
62ce633d36 Make the code more consistant by using the INTR*MASK macros througout the
code.

Reviewed by:	bde

[
Bruce suggest removing the macros completely, but I'm not up to that
task quite yet.
]
1997-01-08 16:12:56 +00:00
Satoshi Asami
e30f001135 More merge and update.
(1) deleted #if 0

    pc98/pc98/mse.c

(2) hold per-unit I/O ports in ed_softc

    pc98/pc98/if_ed.c
    pc98/pc98/if_ed98.h

(3) merge more files by segregating changes into headers.

  new file (moved from pc98/pc98):

    i386/isa/aic_98.h

  deleted:

    well, it's already in the commit message so I won't repeat the
    long list here ;)

Submitted by:	The FreeBSD(98) Development Team
1996-10-30 22:41:46 +00:00
Bruce Evans
9b2b0822b7 Removed unused #includes of <i386/isa/icu.h> and <i386/isa/icu.h>. icu.h
is only used by the icu support modules and by a few drivers that know
too much about the icu (most only use it to convert `n' to `IRQn').  isa.h
is only used by ioconf.c and by a few drivers that know too much about
isa addresses (a few have to, because config is deficient).
1996-06-18 01:22:40 +00:00
Stefan Eßer
21219d2116 Change CONF1_ENABLE_MSK to 0x7ff00000 in another attempt to decide
whether a system could possibly support PCI configuration mechanism 1
(or whether it rather is an EISA only system ...).
1996-06-13 21:50:41 +00:00
Stefan Eßer
e20df7fc31 Make pcibus_check() ignore Device/Vendor IDs of all 0. 1996-04-30 21:37:21 +00:00
Bruce Evans
3157adc8af Removed now-unused #includes of <machine/cpu.h>. They were for bootverbose
being declared in the wrong place.
1996-04-07 17:32:42 +00:00
Bruce Evans
a680ab7537 Count PCI irqs in up to 4 ISAish counters named `pci irqnn' instead of
in the clk0 counter.

Reviewed by:	s
1996-03-29 15:01:51 +00:00
Peter Wemm
a5b996a7ec recording cvs-1.6 file death 1995-12-30 19:02:48 +00:00
Bruce Evans
6ea3e9d839 Completed function declarations and/or added prototypes and/or added
#includes to get prototypes.

pci now uses a different interrupt handler type for interrupts that it
dispatches and the isa interrupt handler type for the interrupts that
it handles.
1995-12-16 00:27:59 +00:00
Poul-Henning Kamp
6f4e0beb7e Staticize and cleanup. 1995-12-10 13:40:44 +00:00
Stefan Eßer
2e80ea0536 Make CONF1_ENABLE_MSK1 even less restriktive: Ignore slot ID ... 1995-10-17 23:30:11 +00:00
Stefan Eßer
0e2f699b9e At least the ASUS Triton motherboards don't disable the PCI bus configuration
accesses after the BIOS bus scan. The previous revision made the assumption,
that every PCI motherboard did ...

Change the test on the initial value of the CONF1_ADDR_PORT register in a way
that makes the probe succeed on triton based motherboards, without breaking
the EISA motherboard that has some non-PCI register at the same address.
1995-10-17 15:23:14 +00:00
Stefan Eßer
287911bd50 Go back to separate tests for configuration mechanism 1 and mechanism 2.
Require the state of the configuration enable bits to be OFF assuming
that the BIOS left them that way, as it should anyway to avoid bad things
to happen.

The tests themselves are copied from the previous release, with the
exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be
read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
Stefan Eßer
c7483249e7 Fix bad typo: CONF1_ENABLE_RES1 was written CONF1_ENABLE_CHK1 ... 1995-10-09 21:56:24 +00:00
Stefan Eßer
77b573149a New approach to the PCI bus configuration mechanism probe problem:
- try to make sure there is any kind of PCI device
- if there is anything at port 0x0cf8, then check for mech. 1 or 2
1995-09-22 19:10:54 +00:00
Stefan Eßer
a3adc4f8c5 Revert most changes of previous commit.
Changes relative to 1.12:
- Put extra instruction between outl()/inl() sequence to prevent the
  old value being read back because of the bus capacitance.
- Additional check for existence of register at CONF2_ENABLE_PORT.
1995-09-18 21:48:39 +00:00
Stefan Eßer
2d14418625 Another try to determine the PCI bus configuration mode (and whether
there is a PCI bus at all) ...

- Do not expect the chip sets to follow even very clearly expressed
  requirements of the PCI 2.0 spec.
- Do not read back the value just written to an I/O port without making
  sure that some other data have crossed the bus in between ...
1995-09-15 21:43:45 +00:00
Stefan Eßer
d7ea35fc88 Improved verification of configuration space accesses working:
Scan for devices instead of assuming that device 0 is present on bus 0
of every PCI motherboard.
1995-09-14 20:27:31 +00:00
Stefan Eßer
cda6791190 Make the PCI host bridge probe code more robust when dealing with chip sets
that use configuration mode 1, but still violate the PCI 2.0 specs ...
(Required for the Compaq Proliant, for example.)
1995-09-13 17:03:47 +00:00
Stefan Eßer
d2a2d5ec41 The PCI config mechanism 1 test failed for the Intel Aries.
Make it less strict ...

Submitted by:	NIIMI Satoshi <sa2c@and.or.jp>
1995-06-30 16:11:42 +00:00
Stefan Eßer
0847c06d2e PCI configuration mechanism now determined by a method, that doesn't
fail on new hardware (Compaq Prolinea and Compaq Prosignea), and that
doesn't erroneously identify old mech. 2 chip sets as using mech. 1.
(See section 3.6.4.1.1 of the PCI bus specs rev. 2.0)
1995-06-28 15:54:57 +00:00
Stefan Eßer
0f29bf015c Correct pcibus_setup() to return as soon as one test succeeds. 1995-03-22 21:35:39 +00:00
Stefan Eßer
9c6f3c132b Delete PCI PCI bridge simulator code ...
Submitted by:	Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-22 19:51:59 +00:00
Stefan Eßer
33865a313c Remove spurious declaration of printf().
Submitted by:	Michael Reifenberger <root@rz-wb.fh-sw.de>
1995-03-22 10:52:05 +00:00
Stefan Eßer
5b3f532eb1 New ISA specific PCI code.
Supports shared PCI interrupts.

Submitted by:	Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:06:07 +00:00
Bruce Evans
550f8550ec Replace all remaining instances of i386/include' by machine' and fix
nearby #include inconsistencies.
1995-02-26 05:14:53 +00:00
Stefan Eßer
781d9d4623 Keep PCI_CONF_MODE in a safe place for later reference, if #defined.
Reviewed by:	se
Submitted by:	seb@erix.ericsson.se (Sebastian Strollo)
1995-02-25 17:51:18 +00:00
Stefan Eßer
6f22585dd4 Initialisation of interrupt masks changed.
Reviewed by:	se
Submitted by:	wolf (Wolfgang Stanglmeier)
1995-02-09 20:16:19 +00:00
Stefan Eßer
ac19f91802 Reviewed by: se
Submitted by:	wolf (Wolfgang Stanglmeier)
New ISA dependend file for PCI bus support.
Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Justin T. Gibbs
d7be8cb6e9 Change the string returned in the aic7870 motherboard probe case. Change
#define to a more appropriate name.
1995-01-22 00:47:50 +00:00
Justin T. Gibbs
344e176820 Add $Id. Recognize motherboard aic7870 based controllers. 1995-01-16 16:31:57 +00:00
Justin T. Gibbs
451ab98ff3 Add in aic7770.c (EISA/VL Adaptors) and aic7870.c (PCI adaptor) dependancies
for the ahc driver.
1995-01-13 02:23:27 +00:00
Stefan Eßer
cde24835d3 Submitted by: Mikael Hybsch <micke@dynas.se>
Add support for NCR 53c815 PCI SCSI chip.
1995-01-12 14:01:13 +00:00
David Greenman
edd5a4af47 Restore my changes in rev 1.11 that Garrett killed in his commit. 1994-12-22 23:42:25 +00:00
Garrett Wollman
dd2e410221 Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
Stefan Eßer
9a3c07de07 Add support for -v option passed to boot loader (bootverbose).
Reviewed by:
Submitted by:
Obtained from:
1994-12-22 21:20:39 +00:00
David Greenman
2b4e0927f6 Unbogify the size being passed to bzero when clearing struct softc. 1994-12-18 14:40:26 +00:00
David Greenman
d33095d2b2 The physical memory allocated for input DMA must be contiguous. The driver
worked in the past only because of good fortune. Anyway, use the contig alloc
routine I wrote awhile ago (vm_page_alloc_contig) for the sound code to do
this allocation. Also, specify read+write on the permissions to pmap_enter().
Specifying just read can have unexpected consquences.
1994-12-11 01:45:41 +00:00
David Greenman
89384ace85 Fix bug I introduced that broke BPF support. Caused by a byte order problem
in an if () expression. Problem fixed by removing the test for ETHERTYPE_*
before passing packet to higher layers.
1994-11-30 12:08:23 +00:00
Stefan Eßer
99e7cabca3 Really deactivated the code that puts scsi stats into dk0.
This should have been disabled for some time, but I had screwed up ...
This made spurious values appear for fd0 in systat, when there was
NCR SCSI activity.
1994-11-28 23:18:46 +00:00
David Greenman
307d80be7a Moved conversion of ether_type to host byte order out of ethernet drivers
and into ether_input(). It was silly to have bpf want this one way and
ether_input want it another way. Ripped out trailer support from the few
remaining drivers that still had it.
1994-11-24 14:29:38 +00:00
David Greenman
b83f4f55d8 Bunch of fixes from Matt Thomas:
1) make #includes correct
2) fix bugs in address check macros
3) fixed bugs in, and enabled, recopy if heavily fragmented code
4) moved call to bpf tap to be before enqueing packet (probably gratuitous)
5) fixed bug that caused "abnormal interrupt" at boot time/first use
6) added support for reading Zynx address ROM
7) fixed bug that caused broadcasts to not work shortly after booting (only
	manifested if not using multicast - e.g. not in FreeBSD 2.0)
8) fixed spelling errors in comments

Submitted by:	Matt Thomas
1994-11-22 09:47:31 +00:00
David Greenman
07d0d0fc9c Added support for SIOCSIFMTU ioctl. Fixed bug that caused panic at boot time
related to interrupts being enabled before the device attach. The interrupt
should be mapped *after* the device attach.
1994-11-13 12:39:38 +00:00
David Greenman
6e876d0d60 Added missing call to bpf on the transmit side. Nuked revision log. 1994-11-10 02:56:48 +00:00
David Greenman
e754e0f30f Fixed bug that somehow made it into here: the ifp must be stored in the
mbuf header for received packets. Minor performance optimizations. Removed
#ifdef MULTICAST's as this isn't optional in our kernel.
1994-11-09 15:12:44 +00:00
Stefan Eßer
66da596420 Submitted by:
Added hooks for "lsdev" ...
PCI devices should need no individual code for lsdev.
1994-11-02 23:47:14 +00:00
Andreas Schulz
339b10f15d Submitted by: Paul F. Werkowski
Add a quirk line for the SONY SDT-5000 like it is done for the WangDAT tapes.
1994-10-30 00:30:27 +00:00
Jordan K. Hubbard
904c1a11ac Make this documentation more sane in the context of 2.0. 1994-10-29 13:13:40 +00:00
Stefan Eßer
c3739b59ec Change some compile time defaults, which may be overridden from the
kernel config file by options lines.
Now the default settings are FAST SCSI, max. 4 TAGS, WIDE transfers,
if supported by the hardware ...
1994-10-27 20:12:46 +00:00
Stefan Eßer
422cdd6132 Modified fifth parameter (imask) to register_intr() according to
new definition of that function.
1994-10-25 23:09:08 +00:00
Stefan Eßer
c6f2eb5edb Added decoding of chipset registers for Pentium 90/100 CPUs. 1994-10-25 18:45:19 +00:00
Poul-Henning Kamp
161e7c8d87 #ifdef'ed the verbose probe messages. Only until I find a good way of
making it run-time selectable, then it will be back (at will).
1994-10-17 21:11:31 +00:00
Stefan Eßer
65005ce25c Fixed typo and message format change to avoid line wrapping. 1994-10-15 23:27:39 +00:00
Stefan Eßer
6055e04518 Submitted by: "Randall W. Dean" <rwd@osf.org>
Fixed typo in initialisation of DMODE:
PCI burst length now really 16 transfers as advertised ...
1994-10-14 23:59:36 +00:00
Stefan Eßer
55f018a694 Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
removed PCI mapping call from vga_attach() in pcisupport.c.
1994-10-13 01:12:31 +00:00
Stefan Eßer
152f2ff316 Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
Debugging option changed, getirr() removed.
1994-10-13 01:11:13 +00:00
Stefan Eßer
140e168d9b Submitted by: Matt Thomas <thomas@lkg.dec.com>
Preliminary FAST Ethernet support added (DEC21140).
1994-10-12 11:19:36 +00:00
Stefan Eßer
157823e855 Temporary disable scanning for VGA cards, was causing problems. 1994-10-12 11:06:49 +00:00
Stefan Eßer
5044407419 Submitted by: Bruce Evans <bde@zeta.org.au>
Function getirr() could clobber interrupt controller state.
1994-10-12 04:17:24 +00:00
Stefan Eßer
468010e809 Small corrections:
pci config line now without irq
	boot message changed
1994-10-12 02:41:21 +00:00
Stefan Eßer
65772aee92 Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
Bug fixed, that caused system hang on first interrupt on some motherboards.

New version of PCI bus configuration code, now supports dynamic interrupt
configuration (using BIOS supplied values).
NCR SCSI and DEC Ethernet driver patched to use this feature.
*** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
Stefan Eßer
86e0c19b6c Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
Name change: pci_intel.c -> pcisupport.c
1994-10-12 02:27:08 +00:00
Stefan Eßer
8870af7f56 Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
Files merged and name change: pci_device.h + pcibios.h -> pcireg.h
1994-10-12 02:25:03 +00:00
Stefan Eßer
22d3e9a6d7 Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
Name change: ncrstat -> ncrcontrol
1994-10-12 02:23:14 +00:00
Stefan Eßer
a7d314a58f Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
Name change: ncr_reg.h -> ncrreg.h
1994-10-12 02:21:56 +00:00
Garrett Wollman
24161ef88f Add Matt Thomas's DC21040 PCI Ethernet driver. (This is turning out
to be quite a popular chip, so expect to see a number of products
based on it.)
1994-10-01 20:16:47 +00:00
Garrett Wollman
01b3600a69 Correct `de' device ID.
Add pd_npresent field for future loadable PCI drivers.
1994-10-01 19:47:33 +00:00
Garrett Wollman
e902866cf7 Correct DEC -> Digital Equipment Corporation. 1994-10-01 00:18:53 +00:00
Stefan Eßer
799e5f277f Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
New version with improved support for WIDE SCSI using the NCR 53c825.
Test for buggy secondary cache implementations.
PCI Int to IRQ mapping now specified per slot.
1994-09-28 16:34:13 +00:00
Rodney W. Grimes
1ee6b373eb Add missing closing comment. I have taken the non-knf format
of this code up with the authors and they are looking at converting it,
but until then leave the format alone.
1994-09-24 02:42:11 +00:00
David Greenman
df9ab3049d Removed inclusion of pio.h and cpufunc.h (cpufunc.h is included from
systm.h). Merged functionality of pio.h into cpufunc.h. Cleaned up some
related code.
1994-09-16 13:33:56 +00:00
Stefan Eßer
4a078e7d90 Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + <se>
Improved bus probing, symbolic names for registers..
Chip set parameters get dumped for intel PCI chip sets
(82424+82434 only, for now).
1994-09-16 00:33:29 +00:00
Stefan Eßer
45271d26ef Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
New version with support for the NCR 53c810 and 53c825.
Support for WIDE SCSI devices.
1994-09-16 00:22:32 +00:00
Garrett Wollman
f86233fe54 Added a bit of missing functionality to make this work correctly on a
wider variety of systems.  Include the deivers from pci_intel.c in
pci_config.c (I hope this is what was intended; my system works ok).
Use pmap_mapdev().  Automatically map any large linear frame buffers
or whatnot in VGA-style devices which ordinarily would not have their
own drivers, and don't call not_supported() for them.  (This shuts up
complaints about my Matrox card.)  Include the beginnings of what could
eventually become dynamically-loadable PCI devices.  Allow for the
possibility of PCI devices simply providing a PCI veneer over an existing
ISA device, and shut up about them, too.
Make autoconfiguration text conform more to the style of other supported
buses.
1994-09-14 01:34:51 +00:00
Stefan Eßer
9c1cc29eec Reviewed by: Stefan Esser <se>
Submitted by:	
Current development version of PCI and NCR 53c810 driver.
Not yet tested under FreeBSD-2.0 !
1994-09-06 22:39:12 +00:00
Stefan Eßer
5ec480ad23 Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
Merged in changes required for NetBSD support (by mycroft@gnu.ai.mit.edu)
and support for multiple NCR chips.
1994-09-01 02:01:45 +00:00
Stefan Eßer
37bd2c9c33 Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se>
Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00