This is a set of updates of the rtw89 driver based on wireless-testing
(wt-2023-05-11) 711dca0ca3d77414f8f346e564e9c8640147f40d (after v6.4-rc1).
(wt-2023-06-09) 7bd20e011626ccc3ad53e57873452b1716fcfaaa (after v6.4-rc5).
(wt-2023-07-24) 62e409149b62a285e89018e49b2e115757fb9022 (after v6.5-rc3).
(wt-2023-08-06) 2a220a15be657a24868368892e3e2caba2115283 (after v6.5-rc4).
(wt-2023-08-13) 81e147b1317ee7cde8b624ee8c0501b470d7e91c (after v6.5-rc5).
MFC after: 20 days
This is a set of updates of the mt76 driver based on wireless-testing
(wt-2023-05-11) 711dca0ca3d77414f8f346e564e9c8640147f40d (after v6.4-rc1),
This adds support for mt7996 as well.
(wt-2023-06-09) 7bd20e011626ccc3ad53e57873452b1716fcfaaa (after v6.4-rc5),
(wt-2023-07-24) 62e409149b62a285e89018e49b2e115757fb9022 (after v6.5-rc3),
(wt-2023-08-06) 2a220a15be657a24868368892e3e2caba2115283 (after v6.5-rc4).
The current version of LinuxKPI lacks support for "page pool" which
needs enhancing and updating a decade or so old shortcut mapping
struct page directly to struct vm_page.
MFC after: 20 days
Import BSD-3-Clause-Clear ath12k driver based on wireless-testing
(wt-2023-05-11) 711dca0ca3d77414f8f346e564e9c8640147f40d (after v6.4-rc1)
with further updates based on
(wt-2023-06-09) 7bd20e011626ccc3ad53e57873452b1716fcfaaa (after v6.4-rc5),
(wt-2023-07-24) 62e409149b62a285e89018e49b2e115757fb9022 (after v6.5-rc3),
(wt-2023-08-06) 2a220a15be657a24868368892e3e2caba2115283 (after v6.5-rc4),
(wt-2023-08-13) 81e147b1317ee7cde8b624ee8c0501b470d7e91c (after v6.5-rc5).
Complement the driver to make compile on FreeBSD
using LinuxKPI with changes covered by #ifdef (__FreeBSD__).
Add the module build framework but keep disconnected from the
build for now.
The current driver (or rather LinuxKPI) lacks support for some
"qcom" bits needed in order to get things working (as does ath11k).
There was interest by various people to enhance support further
for ath11k which will equally benefit ath12k.
Given the lack of full license texts on the files this is
imported under the draft policy for handling SPDX files (D29226)
and with approval for BSD-3-Clause-Clear. [1]
Approved by: core (jhb, 2023-05-11) [1]
MFC after: 20 days
This is a set of updates of the ath11k driver based on wireless-testing
(wt-2023-05-11) 711dca0ca3d77414f8f346e564e9c8640147f40d (after v6.4-rc1),
(wt-2023-06-09) 7bd20e011626ccc3ad53e57873452b1716fcfaaa (after v6.4-rc5),
(wt-2023-07-24) 62e409149b62a285e89018e49b2e115757fb9022 (after v6.5-rc3),
(wt-2023-08-06) 2a220a15be657a24868368892e3e2caba2115283 (after v6.5-rc4).
MFC after: 20 days
The driver provides support for Human Interface Devices (HID) on
Serial Peripheral Interface (SPI) buses on Apple Intel Macs
produced in 2015-2018.
The driver appears to work more stable after installation of Darwin OSI
in acpi(4) driver.
To install Darwin OSI insert following lines into /boot/loader.conf:
hw.acpi.install_interface="Darwin"
hw.acpi.remove_interface="Windows 2009, Windows 2012"
Reviewed by: wulf
Differential revision: https://reviews.freebsd.org/D39863
Each channel gets its own DMA resources, cleanup and "bufferpool"
tasks, and a separate cleanup taskqueue to isolate channels operation
as much as possible to avoid various kernel panics under heavy network
load.
As a side-effect of this work, dpaa2_buf structure is simplified and
all of the functions to re-seed those buffers are gathered now in
dpaa2_buf.h and .c files; functions to work with channels are
extracted into dpaa2_channel.h and .c files as well.
Reported by: dch
Reviewed by: bz
Approved by: bz (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D41296
This basic version of the driver obtains properties of the "sff,sfp"
compatible devices and implements a simple interface to provide an I2C
bus device for the rest of the drivers (e.g. to implement SIOCGI2C).
Both of the interface and driver are subjects for a further
generalization to be used in case of non-FDT and non-arm64 platforms.
Reviewed by: bz, manu
Approved by: bz (mentor)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D41440
This is the list of changes since last release, taken from the release
notes of Chelsio Unified Wire 3.18.0.1.
Version : 1.27.4.0
Date : 07/05/2023
=======================================
Fixes
-----
BASE:
- Handle 40G to 100G cable change.
- Avoid unnecessary i2c read.
=======================================
Obtained from: Chelsio Communications
Sponsored by: Chelsio Communications
MFC after: 1 week
Now that we no longer support armv[45] devices, these tests can be
simplified. While here, update the comment to reflect which rpi devices
we support. It's been way more thant he Pi-B for a long time.
Sponsored by: Netflix
All of these are obsoleted by the general removal of MIPS support.
Actually, corresponding to the removed AH_SUPPORT_x, there is more
superfluous support sprinkled across the HAL source. However, that
code is left in place for now in order to ease a sync to NetBSD.
Reviewed by: emaste (w/ man page fix)
Approved by: adrian
Differential Revision: https://reviews.freebsd.org/D41355
Following the removal of general MIPS support, there's no longer a need
to have the AHB bus-frontend in place, which according to Linux sources
also isn't used with any non-MIPS SoCs. For simplicity, PCI bus support
is only made conditional on the main one again, i. e. device ath_pci is
removed, and built into the main module, i. e. if_ath_pci.ko obsoleted,
respectively.
Effectively, this reverts the following commits and associated changes:
dba9c85977e849bb3ecb
Approved by: adrian
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D41354
Replace two cases of MACHINE_ARCH with MACHINE_CPUARCH and also use
`aarch64` instead of the improper `arm64` for that test.
Noticed by: Mark Millard
Sponsored by: Netflix
This code was used by the first incarnation of wg(4) and is dead ever
since f187d6dfbf has removed the latter
again. Moreover, this code matched iflib(4) like a square peg fits in
a round hole, was incomplete and despite some hacks still tailored to
VPC and wg(4) but not generic. In effect, this reverts the following:
09f6ff4f1a (w/ its "ancillary changes")
9aeca213241f93e931d90f9544d03e0dd691b412
Reviewed by: erj, kbowling
Differential Revision: <https://reviews.freebsd.org/D41196>
When spibus is attached as child of Intel SPI controller it scans all
ACPI nodes for "SPI Serial Bus Connection Resource Descriptor" described
in section 19.6.126 of ACPI specs.
If such a descriptor is found, SPI child is added to spibus, it's SPI
chip select, mode, clock, IRQ resource and ACPI handle are added to ivars.
Existing ACPI bus-hosted child is deleted afterwards.
Apple ACPI SPI extensions are supported.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D41248
The removal of the sparc64 support in February 2020 obsoleted the
VTOC8 partitioning scheme as no other FreeBSD platform makes use
of it. Moreover, the code is bitrotting as nothing defines e. g.
LOADER_VTOC8_SUPPORT any more and, thus, should go now, too. With
this change, the following commits are reverted as far as VTOC8
is concerned and parts haven't already previously been deleted
along with prior sparc64 removals:
094fcb157da7d366e958ba8d50d08b
The alignment example d9711c28ef
added to the VTOC8 section of gpart.8 is folded into the MBR one.
This should finally conclude the deorbit of sparc64-specific bits.
We had joy, we had fun
we ran Unix on a Sun.
But that source and the song
of FreeBSD have all gone.
Credits to Michael Bueker for the original "Unix on a Sun" and Rod
McKuen for the "Seasons in the Sun" lyrics.
The mac_ipacl policy module enables fine-grained control over IP address
configuration within VNET jails from the base system.
It allows the root user to define rules governing IP addresses for
jails and their interfaces using the sysctl interface.
Requested by: multiple
Sponsored by: Google, Inc. (GSoC 2019)
MFC after: 2 months
Reviewed by: bz, dch (both earlier versions)
Differential Revision: https://reviews.freebsd.org/D20967
As it turns out having autotrim default to 'on' on FreeBSD never really
worked due to mess with defines where userland and kernel module were
getting different default values (userland was defaulting to 'off',
module was thinking it's 'on').
PR: 264234
Reviewed by: mav (zfs)
Differential Revision: https://reviews.freebsd.org/D41056
ld.bfd requires an R_386_PLT32 relocation for calls to ifuncs
rather than R_386_PC32. (lld permits R_386_PC32.)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D40811
I do not know why this is here but it blocks compilation.
Removing it makes the builtin option the same as the module build
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/779
Notable upstream pull request merges:
#14654 Pack our DDT ZAPs a bit denser
#14979 Again fix race between zil_commit() and zil_suspend()
#14985 Some ZIO micro-optimizations
#15000 Fix remount when setting multiple properties
#15004 ddt_addref: remove unnecessary phys fill when refcount is 0
#15007 Do not report bytes skipped by scan as issued
#15023 Enable tuning of ZVOL open timeout value
Obtained from: OpenZFS
OpenZFS commit: 009d3288de
OpenZFS tag: zfs-2.2.0-rc1
Notable upstream pull request merges:
#14925 Another set of vdev queue optimizations
#14964 Use big transactions for small recordsize writes
#14999 ZIL: Fix another use-after-free
Obtained from: OpenZFS
OpenZFS commit: a9d6b0690b
This is Broadcom's mpi3mr driver for FreeBSD version 8.6.0.2.0.
The mpi3mr driver supports Broadcom SAS4116-based cards in the 9600
series: 9670W-16i, 9670-24i, 9660-16i, 9620-16i, 9600-24i, 9600-16i,
9600W-16e, 9600-16e, 9600-8i8e.
Initially only available as a module and on amd64/arm64, since that's
how it has been tested to date. Future commits will add it to the kernel
build and may expand the architectures it is supported on.
Co-authored-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Feedback-by: ken (prior versions)
Reviewed-by: imp
RelNotes: yes
Differential-Revision: https://reviews.freebsd.org/D36771
Differential-Revision: https://reviews.freebsd.org/D36772
gVNIC is a virtual network interface designed specifically for
Google Compute Engine (GCE). It is required to support per-VM Tier_1
networking performance, and for using certain VM shapes on GCE.
The NIC supports TSO, Rx and Tx checksum offloads, and RSS.
It does not currently do hardware LRO, and thus the software-LRO
in the host is used instead. It also supports jumbo frames.
For each queue, the driver negotiates a set of pages with the NIC to
serve as a fixed bounce buffer, this precludes the use of iflib.
Reviewed-by: markj
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D39873
This lets one use ossl(4) for AES-GCM operations on contemporary amd64
platforms. A kernel benchmark indicates that this gives roughly
equivalent throughput to aesni(4) for various buffer sizes.
Bulk processing is done in aesni-gcm-x86_64.S, the rest is handled in a
C wrapper ported from OpenSSL's gcm128.c.
Sponsored by: Stormshield
Sponsored by: Klara, Inc.
Reviewed by: jhb
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D39967
aes-gcm-avx512.S is generated from OpenSSL 3.1 and implements AES-GCM.
ossl_x86.c detects whether the CPU implements the required AVX512
instructions; if not, the ossl(4) module does not provide an AES-GCM
implementation. The VAES implementation increases throughput for all
buffer sizes in both directions, up to 2x for sufficiently large
buffers.
The "process" implementation is in two parts: a generic OCF layer in
ossl_aes.c that calls a set of MD functions to do the heavy lifting.
The intent there is to make it possible to add other implementations for
other platforms, e.g., to reduce the diff required for D37421.
A follow-up commit will add a fallback path to legacy AES-NI, so that
ossl(4) can be used in preference to aesni(4) on all amd64 platforms.
In the long term we would like to replace aesni(4) and armv8crypto(4)
with ossl(4).
Note, currently this implementation will not be selected by default
since aesni(4) and ossl(4) return the same probe priority for crypto
sessions, and the opencrypto framework selects the first registered
implementation to break a tie. Since aesni(4) is compiled into the
kernel, aesni(4) wins. A separate change may modify ossl(4) to have
priority.
Sponsored by: Stormshield
Sponsored by: Klara, Inc.
Reviewed by: jhb
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D39783
Continue D40356 and switch the remaining parts of mbuf-related
code to the Netlink mbufs.
Reviewed By: gallatin
Differential Revision: https://reviews.freebsd.org/D40368
MFC after: 2 weeks
Hooked to devctl_notify, this allows consumers to received events
by subscribing to a system over a generic netlink protocol
Reviewed by: imp, melifaro
Differential Revision: https://reviews.freebsd.org/D37574
