Set module_verbose to control the printing of information
about loaded modules and kernel:
0 MODULE_VERBOSE_SILENT None
1 MODULE_VERBOSE_SIZE Pathname and size
2 MODULE_VERBOSE_TWIDDLE as for 1 but also twiddle for progress
3 MODULE_VERBOSE_FULL extra detail
When the loader is verifying modules we already have a
running indication of progress and module_verbose=0 makes sense.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D34245
ld.bfd in binutils 2.34+ now reports an error in more cases for custom
ldscripts that do not place PHDRs in a LOAD segment. However, EFI
binaries are not dynamic binaries which need PHDRs, so pass
--no-dynamic-linker to disable this check.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D34124
The text after .error et al is emitted verbatim.
Reviewed by: sjg
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33904
- Use AES_XTS_IV_LEN instead of the key length as the IV length.
- Use G_ELI_IVKEYLEN as the size of the zeroed iv[] array in
g_eli_crypto_cipher() to match geli_io().
PR: 261172
Reported by: Malcolm Matalka <mmatalka@gmail.com>, mikael
Reviewed by: markj
Sponsored by: FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33884
This helps mesuring what's happening when we load the kernel/modules/mfsroot.
This also adds TSENTER2 which uses the third argument of TSRAW, same
as in the kernel.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33699
The saf1761 OTG support was only for mips targets (BERI?). Retire it.
Sponsored by: Netflix
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D33706
Shortlinks occupy the space of both di_db and di_ib when used. However,
everywhere that wants to read or write a shortlink takes a pointer do
di_db and promptly runs off the end of it into di_ib. This is fine on
most architectures, if a little dodgy. However, on CHERI, the compiler
can optionally restrict the bounds on pointers to subobjects to just
that subobject, in order to mitigate intra-object buffer overflows, and
this is enabled in CheriBSD's pure-capability kernels.
Instead, clean this up by inserting a union such that a new di_shortlink
can be added with the right size and element type, avoiding the need to
cast and allowing the use of the DIP macro to access the field. This
also mirrors how the ext2fs code implements extents support, with the
exact same structure other than having a uint32_t i_data[] instead of a
char di_shortlink[].
Reviewed by: mckusick, jhb
Differential Revision: https://reviews.freebsd.org/D33650
Just have the MD code provide syscall and have generic code for the
rest.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D33515
Split the powerpc specific parts into kboot/arch/powerpc64. More may be
needed here.
Sponsored by: Netflix
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D33514
As the first step at making this more generic, move kboot to top level.
Sponsored by: Netflix
Reviewed by: luporl, tsoome
Differential Revision: https://reviews.freebsd.org/D33513
tftp_open reads the first block so copy it in the cached data.
If we have more than one block (i.e. we called tftp_read before
tftp_preload) simply just reset the transfer.
Reported by: mmel
Reviewed by: mmel, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33697
shadow FB size could be rather large and depends on resolution,
instead of using heap, allocate dedicated space outside of heap.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D33600
MFC after: 2 weeks
On boot we don't need to perform any CPU cache management when the IDC
and DIC fields in the ctr_el0 register are set. Add a command to tell
loader to ignore these fields. This could be useful, for example, if the
hardware is misreporting the values and we are missing a quirk to enable
it.
It is not expected this will be needed, but is only intended as a
workaround to ensure the kernel can still boot.
Sponsored by: The FreeBSD Foundation
In the arm64 loader we need to syncronise the I and D caches. On some
newer CPUs the I and D caches are coherent so we don't need to perform
these operations.
While here remove the arguments to cpu_inval_icache as they are unneeded.
Reported by: cperciva
Tested by: cperciva
Sponsored by: Innovate UK
Kernel needs physical frame buffer address and size, which Block
Transfer-only Graphics Output Protocol instances do not have.
Some recent ASUS boards like PRIME Z690M-PLUS D4 and PRIME H570-Plus
report two GOPs, out of which the second one support ConOut protocol,
that made it preferable, but is BLT-only, that made console unusable.
Discussed with: tsoome (previous version)
MFC after: 1 week
Otherwise on fs like tftp where no directory listing is possible we fail
on the .dir method.
Reviewed by: imp, kevans
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33414
Use %j to it works on 64 and 32 bits system.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33430
The preload method will transfer the whole file in a buffer and cache it
so read/lseek operations are faster.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33410
When we load an ELF file (kernel or module) we do seek(2) a lot to
parse/load the different sections of the ELF file.
Protocol like TFTP suffers a lot from this as there is no resume or
a way to start the tranfer from a specified offset in the file.
fs_preload is added to help those protocol.
Call preload just after opening the ELF file that we need to load so
the underlying method can cache the hole file and then read/lseek operations
are faster.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33409
getsecs is very costly, reuse the values we got before.
Fetching a ~30MB kernel with the tftp command use to take ~26 seconds
and now it's ~18 seconds.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33408
When we load a kernel or module we open/close it a few times.
Since we're using the same port number each time and that we requested
the same file the ACK that we send are valid on the server side and the
server send us the file multiple times.
This makes tftp loading time very inconsistant due to the UDP "flood" that
we have to process.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33407
readtest will simply load the file in memory, useful for timing
loading on some filesystems.
Reviewed by: tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33411
tftp-hpa sends NAK with tftp error set to 0 when trying to get
a directory and this is the first thing that loader tries to do
and this make it hangs.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33406
We never use 'dev' after fetching it from the varargs list. Skip the
whole bother of fetching it, or setting up the meachinery to fetch it.
Sponsored by: Netflix
Build uboot ubldr and friends like we build efi binaries
o move everything to be under stand/uboot
o md code goes in arch/$ARCH
o move everything over from the library
- Had to rename console.c, disk.c and module.c due to conflicts
o update version to 1.5 to reflect the new way of building
This results in a more consistent build system and should represent no
functional change, apart from powerpc version getting new help
file. Also, moved to exlcuding uboot on powerpc64le by using
BROKEN_OPTION instead of the incidental exclusion we had before due to
Makefile reorgs.
Sponsored by: Netflix
Feedback by: stevek, jrtc27
Differential Revision: https://reviews.freebsd.org/D33362
All these files are the same, modulo one comment. Move them all into
common/gfx_fb_stub.c and adjust Makefiles accordingly.
Sponsored by: Netflix
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D33428
Store whether or not we found a vbefb module (eg, a tg supported kernel)
in the preloaded_file structure. This automatically resets on reload and
eliminates load_elf knowing about any gfx_* interface. Restrict this to
i386, which is the only place it's used. Update libi386 to check in the
preloaded_file struct. Eliminate this from the teken_gfx
structure. Rewrite the parsing code to be more inline. Check this from
the same place we check for a relocatable amd64 kernel.
Sponsored by: Netflix
Reviewed by: manu, tsoome
Differential Revision: https://reviews.freebsd.org/D33427
Reading from Write Combining memory can be very-very slow. Try to use
shadow buffer to avoid such reads.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33305
As part of decommissioning mips support, remove the boot loader
support. Do this in advance of other boot loader work to limit the
amount of work that will be thrown away.
Sponsored by: Netflix
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D33377
The elf loader needs to know how to reach into the gfx_fb code, so
simplify how we include files to find that stuff.
Sponsored by: Netflix
Reviewed by: manu, tsoome
Differential Revision: https://reviews.freebsd.org/D33376
Move direct call of ExitBootServices to efi_exit_boot_services. This
function sets boot_services_active to false so callers don't have to do
it everywhere (though currently only loader/bootinfo.c is affected).
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D32226
This makes GOP not probed on some situation (AMD Card on PCIe slot
with EDK2 as we have a SERIAL_IO_PROTOCOL compatible uart).
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D32992
Sponsored by: Beckhoff Automation GmbH & Co. KG
Printing the EFI_HANDLE pointer isn't very useful.
If the handle have a IMAGE_DEVICE_PATH or a DEVICE_PATH protocol print it.
This makes it easier to see which devices are present and what protocol they
expose.
Reviewed by: imp, tsoome
Differential Revision: https://reviews.freebsd.org/D32991
Sponsored by: Beckhoff Automation GmbH & Co. KG
The STDSB macro is passed to the ffs_sbget() routine to fetch a
UFS/FFS superblock "from the stadard place". It was identically defined
in lib/libufs/libufs.h, stand/libsa/ufs.c, sys/ufs/ffs/ffs_extern.h,
and sys/ufs/ffs/ffs_subr.c. Delete it from these four files and
define it instead in sys/ufs/ffs/fs.h. All existing uses of this macro
already include sys/ufs/ffs/fs.h so no include changes need to be made.
No functional change intended.
Sponsored by: Netflix
Add ofwbus, iicbus and spibus to pnpautoload so modules under those
buses will be loaded.
On my rockpro64 now :
OK pnpautoload -v
Autoloading modules for simplebus
Using DTB provided by EFI at 0x8100000.
Autoloading modules for ofwbus
/boot/kernel/rk_spi.ko text=0x14b2 text=0xd4c data=0x4d0+0x8 syms=[0x8+0xa98+0x8+0x807]
/boot/kernel/dwwdt.ko text=0x12e2 text=0x78c data=0x4c8+0x10 syms=[0x8+0x990+0x8+0x6e1]
Autoloading modules for iicbus
Autoloading modules for spibus
/boot/kernel/mx25l.ko text=0x1613 text=0x114c data=0x6e8+0x8 syms=[0x8+0xa08+0x8+0x665]
loading required module 'fdt_slicer'
/boot/kernel/fdt_slicer.ko text=0x95e text=0x340 data=0x290 syms=[0x8+0x6c0+0x8+0x4a0]
