- For x86, change the interrupt source method to assign an interrupt source
to a specific CPU to return an error value instead of void, thus allowing
it to fail.
- If moving an interrupt to a CPU fails due to a lack of IDT vectors in the
destination CPU, fail the request with ENOSPC rather than panicing.
- For MSI interrupts on x86 (but not MSI-X), only allow cpuset to be used
on the first interrupt in a group. Moving the first interrupt in a group
moves the entire group.
- Use the icu_lock to protect intr_next_cpu() on x86 instead of the
intr_table_lock to fix a LOR introduced in the last set of MSI changes.
- Add a new privilege PRIV_SCHED_CPUSET_INTR for using cpuset with
interrupts. Previously, binding an interrupt to a CPU only performed a
privilege check if the interrupt had an interrupt thread. Interrupts
without a thread could be bound by non-root users as a result.
- If an interrupt event's assign_cpu method fails, then restore the original
cpuset mask for the associated interrupt thread.
Approved by: re (kib)
rather than as paths, which would lead to them being treated as relative
pathnames and hence confusingly converted into absolute pathnames.
Capture flags to unmount(2) via an argument token.
Approved by: re (audit argument blanket)
MFC after: 3 days
call could get hung sleeping on "gsssta" if the credentials for a user
that had been accessing the mount point have expired. This happened
because rpc_gss_destroy_context() would end up calling itself when the
"destroy context" RPC was attempted, trying to refresh the credentials.
This patch just checks for this case in rpc_gss_refresh() and returns
without attempting the refresh, which avoids the recursive call to
rpc_gss_destroy_context() and the subsequent hang.
Reviewed by: dfr
Approved by: re (Ken Smith), kib (mentor)
This is normally done by a loop in clnt_dg_close(), but requests that aren't
in the pending queue at the time of closing, don't get set. This avoids a
panic in xdrmbuf_create() when it is called with a NULL cr_mrep if
cr_error doesn't get set to ESHUTDOWN while closing.
Reviewed by: dfr
Approved by: re (Ken Smith), kib (mentor)
is identical to the mode computed from that ACL will modify the ACL.
For example, mode computed from the following ACL is 0600:
user:kamila:rwx--------C--:------:allow
owner@:--x-----------:------:deny
owner@:rw-p---A-W-Co-:------:allow
group@:rwxp----------:------:deny
group@:--------------:------:allow
everyone@:rwxp---A-W-Co-:------:deny
everyone@:------a-R-c--s:------:allow
However, applying that mode (chmod 0600) changes the ACL into this:
user:kamila:rwx-----------:------:deny
user:kamila:rwx--------C--:------:allow
owner@:--x-----------:------:deny
owner@:rw-p---A-W-Co-:------:allow
group@:rwxp----------:------:deny
group@:--------------:------:allow
everyone@:rwxp---A-W-Co-:------:deny
everyone@:------a-R-c--s:------:allow
In chmod(1) utility, there is an optimisation, which makes it not
call chmod(2) if the mode of the file is the same as the new mode.
Disable that optimisation for files which may have NFSv4 ACLs.
Reviewed by: rwatson
Approved by: re (kib)
always started from the start of the packet.
- Fix usage string (multiple addresses can be specified).
- Make the source more style(9) compliant.
- Improve error reporting (do not silently fail if something goes
wrong).
- Make functions static.
- Use warns level 6.
Approved by: re (kib)
Discussed with: Marc Balmer <marc@msys.ch>, brian, mbr
Submitted by: Marc Balmer <marc@msys.ch>
Reviewed by: rwatson
Approved by: re
M usr.sbin/Makefile
A usr.sbin/wake
AM usr.sbin/wake/wake.c
AM usr.sbin/wake/Makefile
AM usr.sbin/wake/wake.8
easily determine how much space is left in the send queue; they do not
need to know the send queue size.
NetBSD revisions:
sys_socket.c r1.41, 1.42
filio.h r1.9
Obtained from: NetBSD
Approved by: re (kensmith)
via cpuctl(4) driver. Two new CPUCTL_MSRSBIT and CPUCTL_MSRCBIT ioctl(2)
calls treat the data field of the argument struct passed as a mask
and set/clear bits of the MSR register according to the mask value.
- Allow user to perform atomic bitwise AND and OR operaions on MSR registers
via cpucontrol(8) utility. Two new operations ("&=" and "|=") have been
added. The first one applies bitwise AND operaion between the current
contents of the MSR register and the mask, and the second performs bitwise
OR. The argument can be optionally prefixed with "~" inversion operator.
This allows one to mimic the "clear bit" behavior by using the command
like this:
cpucontrol -m 0x10&=~0x02 # clear the second bit of TSC MSR
Inversion operator support in all modes (assignment, OR, AND).
Approved by: re (kib)
MFC after: 1 month
threads to put dirty buffers on the vnode bufobj list. For regular files
and synchronous fsync requests, check for the condition and restart the
fsync vop if a new dirty buffer arrived.
Tested by: pho
Approved by: re (kensmith)
MFC after: 1 month
Use inlined (due to FFSV_FORCEINSMQ) version of vn_vget_ino() to prevent
mountpoint from being unmounted and freed while no vnodes are locked.
Tested by: pho
Approved by: re (kensmith)
MFC after: 1 month
- Document different semantics for ACPI_WMI_PROVIDES_GUID_STRING_METHOD
acpi_wmi.c:
- Modify acpi_wmi_provides_guid_string_method to return absolut number of
instances known for the given GUID.
acpi_hp.c:
- sysctl dev.acpi_hp.0.verbose to toggle debug output
- A modification so this can deal with different array lengths
when reading the CMI BIOS - now it works ok on HP Compaq nx7300
as well.
- Change behaviour to query only max_instance-1 CMI BIOS instances,
because all HPs seen so far are broken in that respect
(or there is a fundamental misunderstanding on my side, possible
as well). This way a disturbing ACPI Error Field exceeds Buffer
message is avoided.
- New bit to set on dev.acpi_hp.0.cmi_detail (0x8) to
also query the highest guid instance of CMI bios
acpi_hp.4:
- Document dev.acpi_hp.0.verbose sysctl in man page
- Document new bit for dev.acpi_hp.0.cmi_detail
- Add a section to manpage about hardware that has been reported
to work ok
Submitted by: Michael Gmelin, freebsdusb at bindone.de
Approved by: re (kib)
MFC after: 2 weeks
This fixes a problem created by the recent change that allows a large
number of groups per user. The gidset field in struct kaudit_record
is now dynamically allocated to the size needed rather than statically
(using NGROUPS).
Approved by: re@ (kensmith, rwatson), gnn (mentor)
little purpose and are unused in the base system.
The IOCTL functionality is entirely duplicated and routing sockets
provide a richer interface than the kqueue functionality.
Further, it is not practical for these devices to be made sensible in
the face of VIMAGE.
Bump __FreeBSD_version on the off chance that there is any code out
there that actually uses this stuff.
Reviewed by: rwatson
Discussed with: bz, zec
Approved by: re@ (kensmith)
o new tx ack queue (not used right now)
o proxy-sta related changes (no proxy sta in driver)
o explicit dwds ena/dis (needed only with proxy sta)
o cleanup BA policy handling
o new ampdu aggressive mode support
o CFEnd use now controllable
Approved by: re (kensmith)
result was when the RX index wrapped it was converted into some
sort of gibberish and written into the RDT register, effectively
killing the RX side of the thing :)
Approved by: re
loading hwpmc, but calculate at runtime and allocate the necessary space.
Also the current logic is wrong as it can lead to an endless loop.
Sponsored by: Sandvine Incorporated
Reported by: Ryan Stone <rstone at sandvine dot com>
Tested by: Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
Approved by: re (kib)
under certain environments. However give users chance to override
it when he/she surely knows his/her hardware works with Rx checksum
offload.
Reported by: Ulrich Spoerlein ( uqs <> spoerlein dot net )
MFC after: 1 week
Approved by: re (kensmith)
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC generates
local calls to this function which result in absolute relocations put into
position-independent code segment, making dynamic loader do extra work everys
time given shared library is being relocated and making affected text pages
non-shareable.
Reviewed by: kib
Approved by: re (kensmith)
used kernel TLB slots when unloading the kernel or modules, which
results in havoc when loading a kernel and modules which take up
less TLB slots afterwards as the unused but locked ones aren't
accounted for in virtual_avail. Eventually this should be fixed
in the loader which isn't straight forward though and the kernel
should be robust against this anyway. [1]
- Ensure that the addresses allocated directly from phys_avail[] by
pmap_bootstrap_alloc() are always colored properly. This implicit
assumption was broken in r194784 as unlike the other consumers the
DPCPU area allocated for the BSP isn't a multiple of PAGE_SIZE *
DCACHE_COLORS. [2]
- Remove the no longer used global msgbuf_phys.
- Remove the redundant ekva parameter of pmap_bootstrap_alloc().
- Correct some outdated function names in ktr(9) invocations.
Requested by: jhb [1]
Reported by: gavin [2]
Approved by: re (kib)
MFC after: 2 weeks
Introduce the new flag KNF_NOKQLOCK to allow event callers to be called
without KQ_LOCK mtx held.
- Modify VFS knote calls to always use KNF_NOKQLOCK flag. This is required
for ZFS as its getattr implementation may sleep.
Approved by: re (rwatson)
Reviewed by: kib
MFC after: 2 weeks
Giant was only used here to lock down a bit mask of allocated unit
numbers. Change the code to use its own mutex.
Reviewed by: hselasky
Approved by: re (kib)
