Also remove stat() call and just rely on errno from open() call to discern
whether dev node exists or not.
Sponsored by: Intel
Reviewed by: kib, carl
MFC after: 3 days
Add a function to return the specific type, when the note's Name field is
'FreeBSD'.
r249558 added FreeBSD-specific ELF note types that reuse type numbers of
existing generic / Linux types. This caused 'readelf -n' to produce
incorrect output on FreeBSD core files.
Sponsored by: DARPA, AFRL
MFC after: 3 days
beasts still exist unfortunately. More details can be found in other
references, but the short version is that bridges with this bit set ignore
I/O port ranges that alias to valid ISA I/O port ranges. In the driver
this requires not allocating these alias regions from the parent device
(so they are free to be acquired by ISA devices), and ensuring no child
devices use resources from these alias regions.
- Change the pcib_window structure to allow for an array of backing
resources rather than a single resource and update the existing code
to cope with this. Some of the coping requires using the saved
base and limit values in pcib_window instead of using rman operations
on the backing resource.
- Add special handling for allocating and adjusting the I/O port window
of an ISA-enabled bridge to only allocate the non-alias ranges and
add those to the associated resource manager.
- Reject I/O port allocations for a fixed request that conflicts with an
ISA alias range.
- Remove the "no prefected decode" verbose printf during boot. The absence
of a "prefetched decode" line is sufficient.
- Replace the "subtractively decoded bridge" verbose printf with a single
printf that lists all the "special" decoding modes of a bridge: ISA,
subtractive, and VGA.
- Add a custom bus_release_resource() method to the PCI bus driver so that
it can properly free resources for I/O windows of PCI-PCI bridges.
(These resources are not stored in the bridge device's resource list.)
PR: misc/179033
MFC after: 2 weeks
generic and apply to all sysfs attributes:
- Use sysctl_handle_string() instead of reimplementing it.
- Remove trailing newline from the current value before passing it to
userland and append a newline to the new string value before passing it
to the attribute's store function.
- Don't leak the temporary buffer if the first error check triggers.
- Revert earlier change to mlx4 port mode handler.
PR: kern/174213
Submitted by: Garrett Cooper
Reviewed by: Shakar Klein @ Mellanox
MFC after: 1 week
notation like 2001:db8:1:1.
- Use eui64 flag in ifconfig(8) instead of network6_getladdr()[*] for
interface indentifier part.
Suggested by: ume [*]
MFC after: 3 days
commands during controller initialization.
DELAY() does not work here during config_intrhook context - we need to
explicitly relinquish the CPU for the admin command completion to
get processed.
Sponsored by: Intel
Reported by: Adam Brooks <adam.j.brooks@intel.com>
Reviewed by: carl
MFC after: 3 days
and firmware revision in the controller's identify structure.
Also modify consumers of these fields to ensure they only use the
specified number of bytes for their respective fields.
Sponsored by: Intel
Reviewed by: carl
MFC after: 3 days
the root file system on bootup:
|------------------------------------------------------------------------
|r214006 | marcel | 2010-10-17 22:01:53 -0700 (Sun, 17 Oct 2010) | 20 lines
|
| Re-implement the root mount logic using a recursive approach, whereby each
|root file system (starting with devfs and a synthesized configuration) can
|contain directives for mounting another file system as root.
|------------------------------------------------------------------------
This commit adds a mount.conf(8) man page which documents
the root mount logic. mount.conf(8) also provides some examples
for the /.mount.conf file, which can be used to change the root mount behavior.
Reviewed by: marcel bjk
- Fix a bug in sodump() which prevented struct sockaddr_in6 from displaying.
- Fix a bug in in fiboptlist_csv() which could cause free() of uninitialized
pointer.
- Style cleanups:
. Add missing "static" keywords.
. Use an array of struct sockaddr_storage instead of sockunion for rtmsg.
. Use err() and errx() instead of pair of fprintf(stderr, "...") + exit(1).
. Use nitems() macro.
. Various style(9) fixes.
to Ethernet and the subsequent port being set to IB.
Submitted by: Shakar Klein @ Mellanox
Tested by: Morgan Robertson <morganrobertson@gmail.com>
MFC after: 1 week
This should a regression introduced in r253380 if malloc'ed memory
happens to have '=' at the right place.
Reported by: ache
Pointyhat to: me (avg)
MFC after: 1 day
X-MFC with: r253380
The read DMA request logic operation is based on having sufficient
available space in the transmit data buffer (TXMBUF) before a read
DMA can be requested. There are four read DMA channels that use
the TXMBUF, and the logic checks if the available free space in the
TXMBUF is large enough for all the data in the four Send Buffers
for which buffer descriptors have been fetched. The Enable_Request
signal is asserted only if the free TXMBUF space is larger than the
sum of the four DMA length registers. The power-up default value
of BGE_RDMA_LSO_CRPTEN_CTRL register bit 25 (bit 21 on BCM5720) is
zero, which selects the DMA length registers to connect to the
input of the adder block. The DMA length registers are
asynchronously reset following BCM5719/BCM5720 power-up, and due to
the lack of synchronous deassertion of the length registers reset
signal these resisters may contain uninitialized values following
the reset deassertion.
In the case of the failure the uninitialized DMA length register
values added up to more than the TXMBUF size, which prevented the
assertion of the Enable_Request signal and any subsequent read DMA
to start. This lockup condition is the root cause of failing to
generate any transmit traffic.
To workaround the issue, select alternate output of multiplexers
and transmit the first four Ethernet frames. This overwrites the
DMA length registers with valid values.
Reported by: Geans Pin <geanspin@broadcom.com>
Reviewed by: Geans Pin <geanspin@broadcom.com>
constraint to 8. Previously it may have triggered watchdog
timeouts.
o Check whether interrupt is ours or not.
o Enable interrupts before attemping to transmit queued packets.
This will slightly improve TX performance.
o No need to clear IFF_DRV_OACTIVE in a loop. AE_FLAG_TXAVAIL is
used to know whether there are enough available TxD ring space.
o Added missing bus_dmamap_sync(9) in ae_rx_intr() and rearranged
code to avoid unncessary register access.
o Make sure to clear TxD, TxS, RxD rings in driver initialization.
Otherwise some data in these rings could be interpreted as
'updated' which in turn will advance internally maintained
pointers and can trigger watchdog timeouts.
PR: kern/180382
- We should check is_d32 to see howmany registers we have
- In vfp_restore mark vfpscr as an output register
Without the second part it appears we can return the incorrect value from
vfp_bounce if the VFP condition flags are set as it may override the
register holding the return value.
make the ARM EABI the default ABI on arm, armeb, armv6 and armv6eb.
This is intended to be the default ABI from now on with the old ABI to be
retired. Because of this all users are strongly suggested to upgrade to the
ARM EABI.
As the two ABIs are incompatible it is unlikely upgrading in place will
work. Users should perform a full backup and either use an external machine
to upgrade, or install to an alternative location on their media. They
should also reinstall all ports or packages when these are available.
The only known issues are:
- pkg incorrectly detects the ABI. This is fixed upstream, and will a
patch will be made to the port.
- GDB can have issues with executables built with clang.
__FreeBSD_version has been bumped.
an empty firmware slot, as long as the user has specified a firmware
image to download into the empty firmware slot.
Sponsored by: Intel
Reported by: Joe Golio <joseph.golio@emc.com>
MFC after: 3 days
settings for ACPI-enumerated serial ports by forcing any IRQs that use
an ISA IRQ value with these settings to active-high instead of active-low.
This is known to occur with the BIOS on an Intel D2500CCE motherboard.
Tested by: Robert Ames <robertames@hotmail.com>, lev
Submitted by: Juergen Weiss weiss at uni-mainz.de (original patch)
