We might own the last use reference, and then vrele() at the end would
need to take the dvp vnode lock to inactivate, which causes deadlock
with vp. We cannot vrele() dvp from start since this might unlock ldvp.
Handle it by holding the vnode and dropping use ref after lowerfs
VOP_VPUT_PAIR() ended. This effectivaly requires unlock of the vp vnode
after VOP_VPUT_PAIR(), so the call is changed to set unlock_vp to true
unconditionally. This opens more opportunities for vp to be reclaimed,
if lvp is still alive we reinstantiate vp with null_nodeget().
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
Nullfs vnode which shares vm_object and pages with the lower vnode should
not be exempt from the reclaim just because lower vnode cached a lot.
Their reclamation is actually very cheap and should be preferred over
real fs vnodes, but this change is already useful.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
Other threads observing the non-NULL um_softdep can assume that it is
safe to use it. This is important for ro->rw remounts where change from
read-only to read-write status cannot be made atomic.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
otherwise we might follow a pointer in the freed memory.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
Suppose that we remount rw->ro and in parallel some reader tries to
instantiate a vnode, e.g. during lookup. Suppose that softdep_unmount()
already started, but we did not cleared the MNT_SOFTDEP flag yet.
Then ffs_vgetf() calls into softdep_load_inodeblock() which accessed
destroyed hashes and freed memory.
Set/clear fs_ronly simultaneously (WRT to files flush) with MNT_SOFTDEP.
It might be reasonable to move the change of fs_ronly to under MNT_ILOCK,
but no readers take it.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
Now MNT_SOFTDEP indicates that SU are active in any variant +-J, and
SU+J is indicated by MNT_SOFTDEP | MNT_SUJ combination. The reason is
that unmount will be able to easily hide SU from other operations by
clearing MNT_SOFTDEP while keeping the record of the active journal.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
It will be used to allow SU flush code to sync the volume while external
consumers see that SU is already disabled on the filesystem. Use it where
ffs_vgetf() called by SU code to process dependencies.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
This removes the need to check for error == 0.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
Receive Segment Coalescing (RSC) in the vSwitch is a feature available in
Windows Server 2019 hosts and later. It reduces the per packet processing
overhead by coalescing multiple TCP segments when possible. This happens
mostly when TCP traffics are among different guests on same host.
This patch adds netvsc driver support for this feature.
The patch also updates NVS version to 6.1 as needed for RSC
enablement.
MFC after: 2 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D29075
Complete the transition to README.md I started 3 years ago. Remove the
now-redundant README file. It's currently just README.md w/o the light markup
and adds no real value. This also allows us to use additional MarkDown
markup as we see fit w/o worrying about keeping things in sync.
The NIC no longer provides a host database, and hasn't for quite some
time. Remove that paragraph, it's not been relevant for many years. Also, hosts
appeared in 4.1c, not 4.2, so correct that too.
Noticed by: Henry Bent
nvme drives are configured early in boot. However, a number of the configuration
steps takes which take a while, so we defer those to a config intrhook that runs
before the root filesystem is mounted. At the same time, the PCI hot plug wakes
up and tests the status of the card. It may decide that the card has gone away
and deletes the child. As part of that process nvme_detach is called. If this
call happens after the config_intrhook starts to run, but before it is finished,
there's a race where we can tear down the device's soft state while the
config_intrhook is still using it. Use the new config_intrhook_drain to
disestablish the hook. Either it will be removed w/o running, or the routine
will wait for it to finish. This closes the race and allows safe hotplug at any
time, even very early in boot.
Sponsored by: Netflix, Inc
Reviewed by: jhb, mav
Differential Revision: https://reviews.freebsd.org/D29006
config_intrhook_drain will remove the hook from the list as
config_intrhook_disestablish does if the hook hasn't been called. If it has,
config_intrhook_drain will wait for the hook to be disestablished in the normal
course (or expedited, it's up to the driver to decide how and when
to call config_intrhook_disestablish).
This is intended for removable devices that use config_intrhook and might be
attached early in boot, but that may be removed before the kernel can call the
config_intrhook or before it ends. To prevent all races, the detach routine will
need to call config_intrhook_train.
Sponsored by: Netflix, Inc
Reviewed by: jhb, mav, gde (in D29006 for man page)
Differential Revision: https://reviews.freebsd.org/D29005
This looks like a no-op, but it prevents udevadm(8) with failing
loudly, which in turn unbreaks installation of libfprint-2-2, which
in Focal is a dependency for make-4.2.1-1.2.
One might wonder why installing a build utility involves messing
with device handling...
Sponsored By: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29133
The per-domain partpop queue is locked by the combination of the
per-domain lock and individual reservation mutexes.
vm_reserv_reclaim_contig() scans the queue looking for partially
populated reservations that can be reclaimed in order to satisfy the
caller's allocation.
During the scan, we drop the per-domain lock. At this point, the rvn
pointer may be invalidated. Take care to load rvn after re-acquiring
the per-domain lock.
While here, simplify the condition used to check whether a reservation
was dequeued while the per-domain lock was dropped.
Reviewed by: alc, kib
Reported by: gallatin
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29203
pf_kkif_free() already checks for NULL, so we don't have to check before
we call it.
Reviewed by: melifaro@
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29195
The pwm utility cant set the only flag defined (PWM_POLARITY_INVERTED) so this
patch add the option -I (capital letter i) to send it to the drivers.
None of existing PWM driver have implemented support for flags.
But soon:ish I will put up an review of a pwm driver using TI OMAP DMTimer.
Differential Revision: https://reviews.freebsd.org/D29137
MFC after: 2 weeks
Fix the types of period and duty in share/man/man9/pwmbus.9 to match the one in sys/dev/pmw/pwmbus.c.
Reviewed By: rpokala
Differential Revision: https://reviews.freebsd.org/D29139
MFC after: 3 days
Clang 12 no longer supports -Wno-error-..., only the -Wno-error=...
style (which is already used everywhere else in the tree).
Differential Revision: https://reviews.freebsd.org/D29157
Summary:
This fixes rtentry leak for the cloned interfaces created inside the
VNET.
PR: 253998
Reported by: rashey at superbox.pl
MFC after: 3 days
Loopback teardown order is `SI_SUB_INIT_IF`, which happens after `SI_SUB_PROTO_DOMAIN` (route table teardown).
Thus, any route table operations are too late to schedule.
As the intent of the vnet teardown procedures to minimise the amount of effort by doing global cleanups instead of per-interface ones, address this by adding a relatively light-weight routing table cleanup function, `rib_flush_routes()`.
It removes all remaining routes from the routing table and schedules the deletion, which will happen later, when `rtables_destroy()` waits for the current epoch to finish.
Test Plan:
```
set_skip:set_skip_group_lo -> passed [0.053s]
tail -n 200 /var/log/messages | grep rtentry
```
Reviewers: #network, kp, bz
Reviewed By: kp
Subscribers: imp, ae
Differential Revision: https://reviews.freebsd.org/D29116
Copy the iovec for the trailer from the proper place. This is the same
fix for CBC encryption from ff6a7e4ba6.
Reported by: gallatin
Reviewed by: gallatin, markj
Fixes: 49f6925ca
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29177
We don't need the result before next sleep time, so no reason to
additionally increase interrupt latency.
While there, remove extra PM ticks to microseconds conversion, making
C2/C3 sleep times look 4 times smaller than really. The conversion
is already done by AcpiGetTimerDuration(). Now I see reported sleep
times up to 0.5s, just as expected for planned 2 wakeups per second.
MFC after: 1 month
The ENTRY() macro was modified by commit
28d945204e to add an optional NOP instruction
at the beginning of the function. It is of course an arm64 instruction, so
unsuitable for the 32bits sigcode. So just use EENTRY() instead for
aarch32_sigcode. This should fix receiving signals when running 32bits
binaries on FreeBSD/arm64.
MFC After: 1 week
It has been observed that some systems are often unable to resume from
ddb after entering with debug.kdb.enter=1. Checking the status further
shows the terminal is blocked waiting in tty_drain(), but it never makes
progress in clearing the output queue, because sc->sc_txbusy is high.
I noticed that when entering polling mode for the debugger, IER_TXRDY is
set in the failure case. Since this bit is never tracked by the softc,
it will not be restored by ns8250_bus_ungrab(). This creates a race in
which a TX interrupt can be lost, creating the hang described above.
Ensuring that this bit is restored is enough to prevent this, and resume
from ddb as expected.
The solution is to track this bit in the sc->ier field, for the same
lifetime that TX interrupts are enabled.
PR: 223917, 240122
Reviewed by: imp, manu
Tested by: bz
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29130
I noticed that many of the math-related tests were failing on AArch64.
After a lot of debugging, I noticed that the floating point exception flags
were not being reset when starting a new process. This change resets the
VFP inside exec_setregs() to ensure no VFP register state is leaked from
parent processes to children.
This commit also moves the clearing of fpcr that was added in 65618fdda0
from fork() to execve() since that makes more sense: fork() can retain
current register values, but execve() should result in a well-defined
clean state.
Reviewed By: andrew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29060
The names are self-explanatory; these are currently only used by the
wg(8) tool, but they are handy data points to have.
Reviewed by: grehan
MFC after: 3 days
Discussed with: decke
Differential Revision: https://reviews.freebsd.org/D29143
If we hit an error during init, then we'll unwind our state and attempt
to detach the device -- don't block it.
This was discovered by creating a wg0 with missing parameters; said
failure ended up leaving this orphaned device in place and ended up
panicking the system upon enumeration of the dev.* sysctl space.
Reviewed by: gallatin, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29145
We have no use for the udphdr or this hlen local, just spell out the
addition inline.
MFC after: 3 days
Reviewed by: grehan, markj
Differential Revision: https://reviews.freebsd.org/D29142
