These two ioctls are not part of the current version of OSS and were
considered obsolete. However, their behaviour is not the same as their
old one, so this implementation is specific to FreeBSD.
Older OSS versions had the MUTE ioctls take and return an integer with
a value of 0 or 1, which meant that the _whole_ mixer is unmuted or
muted respectively. In my implementation, the ioctl takes and returns
a bitmask that tells us which devices are muted.
This allows us to mute and unmute only the devices we want, instead of the
whole mixer. The bitmask works the same way as in DEVMASK, RECMASK and
RECSRC.
Integrated the hardware volume feature with the new mute system.
Submitted by: Christos Margiolis <christos@freebsd.org>
Differential Revision: https://reviews.freebsd.org/D31130
MFC after: 1 week
Sponsored by: NVIDIA Networking
sys/dev/sound/pci/hda/hdaa_patches.c:
match_pin_patches: Use HDA_DEV_MATCH instead of regular ==
sys/dev/sound/pci/hda/pin_patch_realtek.h:
Add quirk for Lenovo laptops when ALC298 is used.
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
This framework is initial implementation of the simple-audio-card compatible
audio driver framework. It provides glue for CPU/codec/aux device.
Differential Revision: https://reviews.freebsd.org/D27830
3e7bae0821 turns the BUS_READ_IVAR() failure from a warning into a
KASSERT. For certain PCI audio devices such like snd_csa(4) and
snd_emu10kx(4), the ac97_create() keeps the device handler generated
by device_add_child(pci_dev, "pcm"), which is not really a PCI device
handler. This in turn causes the subsequent pci_get_subdevice()
inside ac97_initmixer() triggering a panic.
This patch tries to put a bandaid for the aforementioned pcm device
children such that they can use the correct PCI handler(from parent)
to avoid a KASSERT panic in the INVARIANTS kernel.
Tested with: snd_csa(4), snd_ich(4), snd_emu10kx(4)
Reviewed by: imp
MFC after: 1 month
- SNDSTAT_LABEL_* are renamed to SNDST_DSPS_*, and SNDSTAT_LABEL_DSPS
becomes SNDST_DSPS.
- Centralize channel number/rate/formats into a single nvlist
The above nvlist is named "info_play" and "info_rec"
- Expose only encoding format in pfmts/rfmts. Userland has no direct
access to AFMT_ENCODING/CHANNEL/EXTCHANNEL macros, thus it serves no
meaning to expose too much information through this pair of labels.
However pminrate/rminrate, pmaxrate/rmaxrate, pfmts/rfmts are
deprecated and will be removed in future.
This commit keeps ioctls ABI compatibility with __FreeBSD_version
1400006 for now. In future the compat ABI with 1400006 will be removed
once audio/virtual_oss is rebuilt.
Sponsored by: The FreeBSD Foundation
Reviewed by: hselasky
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D29770
Use strncmp() instead of bcmp(), so that we don't have to find the
minimum of the string lengths before comparing.
Reviewed by: kib
Reported by: KASAN
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29463
These ioctl commands aim to provide easier ways for user space
applications to enumerate existing audio devices and the node they can
potentially use.
The exchange of device lists between user space and kernel is done on
nv(9). Some ioctl commands are added to /dev/sndstat node:
- SNDSTAT_REFRESH_DEVS
- SNDSTAT_GET_DEVS
- SNDSTAT_ADD_USER_DEVS
- SNDSTAT_FLUSH_USER_DEVS
Bump __FreeBSD_version to reflect the addition of the ioctls.
Sponsored by: The FreeBSD Foundation
Reviewed by: hselasky
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D26884
Locking the second lock which causes the LOR, can be skipped because
the code updating the shared variables is always executing from the
same USB thread.
lock order reversal:
1st 0xfffff80005cc3840 pcm7:play:dsp7.p0 (pcm play channel, sleep mutex)
@ usb_transfer.c:2342
2nd 0xfffff80005cc3860 pcm7:record:dsp7.r0 (pcm record channel, sleep mutex)
@ uaudio.c:2317
lock order pcm record channel -> pcm play channel established at:
witness_checkorder+0x461
__mtx_lock_flags+0x98
dsp_mmap_single+0x151
vm_mmap_cdev+0x65
devfs_mmap_f+0x143
kern_mmap_req+0x594
sys_mmap+0x46
amd64_syscall+0x12e
fast_syscall_common+0xf8
lock order pcm play channel -> pcm record channel attempted at:
witness_checkorder+0xd82
__mtx_lock_flags+0x98
uaudio_chan_play_callback+0xeb
usbd_callback_wrapper+0x7ec
usb_command_wrapper+0x7e
usb_callback_proc+0x8e
usb_process+0xf3
fork_exit+0x80
fork_trampoline+0xe
Found by: Stefan Ehmann <shoesoft@gmx.net>
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Also hide shim code added in a previous commit under COMPAT_USBHID12.
Note: it is enough to add -DCOMPAT_USBHID12 to CFLAGS to compile old
code with new HID subsystem, but it is not enough to link it at runtime.
HID dependency has to be added explicitly with MODULE_DEPEND macro.
Reviewed by: manu, hselasky (as part of D27887)
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
the HID volume keys support in the USB audio driver.
While at it re-organize the USB audio sysctls a bit.
Differential Revision: https://reviews.freebsd.org/D27180
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
It is reported to fix kernel panics when early unsolicited responses
delivered to the CODEC device not having driver attached yet.
PR: 250248
Reported by: Rajeev Pillai <rajeev_v_pillai@yahoo.com>
Reviewed by: avg
MFC after: 2 weeks
ich_init() returns an errno value or 0, but ich_pci_resume() was
comparing the return value with -1 to determine whether an error had
occurred.
PR: 248941
Submitted by: Tong Zhang <ztong0001@gmail.com>
MFC after: 1 week
Handle the fact that parts of usb(4) can be compiled into the boot
loader, where M_WAITOK does not guarantee a successful allocation.
PR: 240545
Submitted by: Andrew Reiter <arr@watson.org> (original version)
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25706
Not all interrupt sources that affect CIS bit were acknowledged.
Specifically, bits in STATESTS (aka WAKESTS) were left set.
The fix is to disable WAKEEN and clear STATESTS bits before the HDA
interrupt is enabled. This way we should never get any STATESTS bits.
I also added placeholders for all event bits that we currently do not
enable, do not handle and do not clear. This might get useful when / if
we enable any of them.
Reported by: kib (Apollo Lake hardware)
Tested by: kib (earlier, different change)
MFC after: 2 weeks
X-MFC with: r362294
For the sake of the record, this is the last use of the words master and slave
in the FreeBSD's USB stack, drivers and subsystems.
MFC after: 1 week
Sponsored by: Mellanox Technologies
It is plausible that the hardware interrupts a host only when GIS goes
from zero to one. GIS is formed by OR-ing multiple hardware statuses,
so it's possible that a previously cleared status gets set again while
another status has not been cleared yet. Thus, there will be no new
interrupt as GIS always stayed set. If we don't re-examine GIS then we
can leave it set and never get another interrupt again.
Without this change I frequently saw a problem where snd_hda would stop
working. Setting dev.hdac.1.polling=1 would bring it back to life and
afterwards I could set polling back to zero. Sometimes the problem
started right after a boot, sometimes it happened after resuming from
S3, frequently it would occur when sound output and input are active
concurrently (such as during conferencing). I looked at HDAC_INTSTS
while the sound was not working and I saw that both HDAC_INTSTS_GIS and
HDAC_INTSTS_CIS were set, but there were no interrupts.
I have collected some statistics over a period of several days about how
many loops (calls to hdac_one_intr) the new code did for a single
interrupt:
+--------+--------------+
|Loops |Times Happened|
+--------+--------------+
|0 |301 |
|1 |12857746 |
|2 |280 |
|3 |2 |
|4+ |0 |
+--------+--------------+
I believe that previously the sound would get stuck each time we had to loop
more than once.
The tested hardware is:
hdac1: <AMD (0x15e3) HDA Controller> mem 0xfe680000-0xfe687fff at device 0.6 on pci4
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
No objections: mav
MFC after: 5 weeks
Differential Revision: https://reviews.freebsd.org/D25128
So, replicate the ATI vendor snoop configuration for the AMD vendor.
I think that this should fix a number of cases where users currently
have to resort to polling or disabling MSI.
MFC after: 1 week
snd_hda was rewritten in r230130; one function retained a comment
referencing the previous name.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
There are several reports of "hdac0: Command timeout on address 2"
messages emitted during playback on a variety of contemporary machines.
Show the command that timed out in case it might provide a clue in
finding the cause.
PR: 229190
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The comment previously stated the delay must be at least 250us but that
was insufficient and so should be doubled, but the delay was actually
1000. The HDA spec actually says the delay must be 521 us (25 frames)
so update the comment to match.
device. This requires some structural refactoring inside the driver, mostly
about converting existing audio channel structures into arrays.
The main audio mixer is provided by the first PCM instance.
The non-first audio instances may only have a software mixer for PCM playback.
Tested by: Horse Ma <Shichun.Ma@dell.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
If hdaa is used in polling mode, it logs each change to the poll
interval under bootverbose, which makes it unusable (slow). These
messages are arguably useless or are a debugging leftovers at best.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
- make sure volume controls are correctly mapped to "pcm" and "rec" depending
on how they deliver audio to the USB host.
- make sure there are no duplicate record selections.
- remove internal only mixer class type.
- don't add software volume controls for recording only.
- some minor mixer code cleanup.
Tested by: Horse Ma <Shichun.Ma@dell.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
