A straightforward(ish) port from aesni(4). This implementation does not
perform loop unrolling on the input blocks, so this is left as a future
performance improvement.
Submitted by: Greg V <greg AT unrelenting.technology>
Looks good: jhb, jmg
Tested by: mhorne
Differential Revision: https://reviews.freebsd.org/D21017
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
Enable in-kernel acceleration of SHA1 and SHA2 operations on arm64 by adding
support for the ossl(4) crypto driver. This uses OpenSSL's assembly routines
under the hood, which will detect and use SHA intrinsics if they are
supported by the CPU.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27390
Make room for adding arm64 support to this driver by moving the
x86-specific feature parsing to a separate file.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27388
OCF drivers in general should perform as many session parameter checks
as possible during probesession rather than when creating a new
session. I got this wrong for aesni(4) in r359374. In addition,
aesni(4) was performing the check for digest-only requests and failing
to create digest-only sessions as a result.
Reported by: jkim
Tested by: jkim
Sponsored by: Chelsio Communications
Add missing break to prevent falling through to the default case statement
and returning EINVAL for all session configs.
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Currently, this supports SHA1 and SHA2-{224,256,384,512} both as plain
hashes and in HMAC mode on both amd64 and i386. It uses the SHA
intrinsics when present similar to aesni(4), but uses SSE/AVX
instructions when they are not.
Note that some files from OpenSSL that normally wrap the assembly
routines have been adapted to export methods usable by 'struct
auth_xform' as is used by existing software crypto routines.
Reviewed by: gallatin, jkim, delphij, gnn
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26821
This patch adds support for IPsec ESN (Extended Sequence Numbers) in
encrypt and authenticate mode (eg. AES-CBC and SHA256) and combined mode
(eg. AES-GCM).
For the encrypt and authenticate mode the ESN is stored in separate
crp_esn buffer because the high-order 32 bits of the sequence number are
appended after the Next Header (RFC 4303).
For the combined modes the high-order 32 bits of the sequence number
[e.g. RFC 4106, Chapter 5 AAD Construction] are part of crp_aad
(prepared by netipsec layer in case of ESN support enabled), therefore
non visible diff around combined modes.
Submitted by: Grzegorz Jaszczyk <jaz@semihalf.com>
Patryk Duda <pdk@semihalf.com>
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D22365
Obtained from: Semihalf
Sponsored by: Stormshield
Weirdly, I needed to sprinkle more parens here to get gcc-as in 6.4
to correctly generate things.
Without them, I'd get an unknown variable reference to SKEIN_ASM_UNROLL1024.
This at least links now, but I haven't run any test cases against it.
It may be worthwhile doing it in case gcc-as demands we liberally sprinkle
more brackets around variables in .if statements.
Thanks to ed for the suggestion of just sprinkling more brackets to
see if that helped.
Reviewed by: emaste
For some reason I don't want to really understand, the following
happens with gnu as.
/home/adrian/git/freebsd/src/sys/crypto/skein/amd64/skein_block_asm.S: Assembler messages:
/home/adrian/git/freebsd/src/sys/crypto/skein/amd64/skein_block_asm.S:466: Error: found '(', expected: ')'
/home/adrian/git/freebsd/src/sys/crypto/skein/amd64/skein_block_asm.S:466: Error: junk at end of line, first unrecognized character is `('
/home/adrian/git/freebsd/src/sys/crypto/skein/amd64/skein_block_asm.S:795: Error: found '(', expected: ')'
/home/adrian/git/freebsd/src/sys/crypto/skein/amd64/skein_block_asm.S:795: Error: junk at end of line, first unrecognized character is `('
/home/adrian/git/freebsd/src/sys/crypto/skein/amd64/skein_block_asm.S:885: Error: non-constant expression in ".if" statement
/home/adrian/git/freebsd/src/sys/crypto/skein/amd64/skein_block_asm.S:885: Error: non-constant expression in ".if" statement
/home/adrian/git/freebsd/src/sys/crypto/skein/amd64/skein_block_asm.S:885: Error: non-constant expression in ".if" statement
/home/adrian/git/freebsd/src/sys/crypto/skein/amd64/skein_block_asm.S:885: Error: non-constant expression in ".if" statement
/home/adrian/git/freebsd/src/sys/crypto/skein/amd64/skein_block_asm.S:885: Error: non-constant expression in ".if" statement
/home/adrian/git/freebsd/src/sys/crypto/skein/amd64/skein_block_asm.S:885: Error: non-constant expression in ".if" statement
After an exhaustive search and experimentation at 11pm, I discovered that
putting them in parentheses fixes the compilation.
Ed pointed out that I could likely fix this in a bunch of other
locations but I'd rather leave these alone until other options
are enabled.
Tested:
* gcc-6, amd64
Reviewed by: emaste
arm64 has a similar wrapper. This permits defining <machine/fpu.h> as
the standard header for fpu_kern_*.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26753
The assembly implementation incorrectly used logical AND instead of
bitwise AND. Fix, and re-enable in libmd.
Submitted by: Yang Zhong <yzhong@freebsdfoundation.org>
Reviewed by: cem (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26614
The cryptodev_process() method should either return 0 if it has
completed a request, or ERESTART to defer the request until later. If
a request encounters an error, the error should be reported via
crp_etype before completing the request via crypto_done().
Fix a few more drivers noticed by asomers@ similar to the fix in
r365389. This is an old bug, but went unnoticed since crypto requests
did not start failing as a normal part of operation until digest
verification was introduced which can fail requests with EBADMSG.
PR: 247986
Reported by: asomers
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26361
crypto(9) functions can now be used on buffers composed of an array of
vm_page_t structures, such as those stored in an unmapped struct bio. It
requires the running to kernel to support the direct memory map, so not all
architectures can use it.
Reviewed by: markj, kib, jhb, mjg, mat, bcr (manpages)
MFC after: 1 week
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25671
Like other types of allocation, fpu_kern_ctx are frequently allocated per-cpu.
Provide the API and sketch some example consumers.
fpu_kern_alloc_ctx_domain() preferentially allocates memory from the
provided domain, and falls back to other domains if that one is empty
(DOMAINSET_PREF(domain) policy).
Maybe it makes more sense to just shove one of these in the DPCPU area
sooner or later -- left for future work.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D22053
These bzero's should have been explicit_bzero's.
Reviewed by: cem, delphij
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25437
In addition to reducing lines of code, this also ensures that the full
allocation is always zeroed avoiding possible bugs with incorrect
lengths passed to explicit_bzero().
Suggested by: cem
Reviewed by: cem, delphij
Approved by: csprng (cem)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25435
The amount to copy for the first block is the minimum of the size of
the AAD region or the remaining space in the first block.
Reported by: cryptocheck -z
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25140
- crypto_apply() is only used for reading a buffer to compute a
digest, so change the data pointer to a const pointer.
- To better match m_apply(), change the data pointer type to void *
and the length from uint16_t to u_int. The length field in
particular matters as none of the apply logic was splitting requests
larger than UINT16_MAX.
- Adjust the auth_xform Update callback to match the function
prototype passed to crypto_apply() and crypto_apply_buf(). This
removes the needs for casts when using the Update callback.
- Change the Reinit and Setkey callbacks to also use a u_int length
instead of uint16_t.
- Update auth transforms for the changes. While here, use C99
initializers for auth_hash structures and avoid casts on callbacks.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25171
Use this in GELI to print out a different message when accelerated
software such as AESNI is used vs plain software crypto.
While here, simplify the logic in GELI a bit for determing which type
of crypto driver was chosen the first time by examining the
capabilities of the matched driver after a single call to
crypto_newsession rather than making separate calls with different
flags.
Reviewed by: delphij
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25126
Comparing the object files produced by GNU as 2.17.50 and Clang IAS
shows many immaterial changes in strtab etc., and one material change
in .text:
1bac: 4c 8b 4f 18 mov 0x18(%rdi),%r9
1bb0: eb 0e jmp 1bc0 <Skein1024_block_loop>
- 1bb2: 66 66 2e 0f 1f 84 00 data16 nopw %cs:0x0(%rax,%rax,1)
- 1bb9: 00 00 00 00
- 1bbd: 0f 1f 00 nopl (%rax)
+ 1bb2: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1)
+ 1bb9: 00 00 00
+ 1bbc: 0f 1f 40 00 nopl 0x0(%rax)
0000000000001bc0 <Skein1024_block_loop>:
Skein1024_block_loop():
1bc0: 4c 8b 47 10 mov 0x10(%rdi),%r8
1bc4: 4c 03 85 c0 00 00 00 add 0xc0(%rbp),%r8
That is, GNU as and Clang's integrated assembler use different multi-
byte NOPs for alignment (GNU as emits an 11 byte NOP + a 3 byte NOP,
while Clang IAS emits a 10 byte NOP + a 4 byte NOP).
Dependency cleanup hacks are not required, because we do not create
.depend files from GNU as.
Reviewed by: allanjude, arichardson, cem, tsoome
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8434
Clang IAS does not support the --defsym argument, and
.ifndef SKEIN_USE_ASM
gets turned into
.ifndef 1792
by the preprocessor, which results in
error: expected identifier after '.ifdef'
.ifndef 1792
^
Use #ifdef instead, which still works with GNU as.
Reviewed by: cem
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25154
GNU as seems to allow macro arguments without the '\' but clang is more
strict in that regard.
This change makes the source code compatible with LLVM's but does not yet
change the build system or rename it to .S.
The new code assembles identically with GNU as 2.17.50.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D25143
r359374 introduced crypto_apply function which takes as argument a function pointer
that is expected to return an int, however aesni hash update functions
return void.
Because of that the function pointer passed was simply cast with
its return value changed.
This resulted in undefined behavior, in particular when mbuf is used, (ipsec)
m_apply checks return value of function pointer passed to it
and in our case bogusly fails after calculating hash of the first mbuf
in chain.
Fix it by changing signatures of sha update routines in aesni and
dropping the casts.
Submitted by: Kornel Duleba
Reviewed by: jhb, cem
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D25030
The backend routines aesni(4) call for specific encryption modes all
expect virtually contiguous input/output buffers. If the existing
output buffer is virtually contiguous, always write to the output
buffer directly from the mode-specific routines. If the output buffer
is not contiguous, then a temporary buffer is allocated whose output
is then copied to the output buffer. If the input buffer is not
contiguous, then the existing buffer used to hold the input is also
used to hold temporary output.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24545
Some crypto consumers such as GELI and KTLS for file-backed sendfile
need to store their output in a separate buffer from the input.
Currently these consumers copy the contents of the input buffer into
the output buffer and queue an in-place crypto operation on the output
buffer. Using a separate output buffer avoids this copy.
- Create a new 'struct crypto_buffer' describing a crypto buffer
containing a type and type-specific fields. crp_ilen is gone,
instead buffers that use a flat kernel buffer have a cb_buf_len
field for their length. The length of other buffer types is
inferred from the backing store (e.g. uio_resid for a uio).
Requests now have two such structures: crp_buf for the input buffer,
and crp_obuf for the output buffer.
- Consumers now use helper functions (crypto_use_*,
e.g. crypto_use_mbuf()) to configure the input buffer. If an output
buffer is not configured, the request still modifies the input
buffer in-place. A consumer uses a second set of helper functions
(crypto_use_output_*) to configure an output buffer.
- Consumers must request support for separate output buffers when
creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are
only permitted to queue a request with a separate output buffer on
sessions with this flag set. Existing drivers already reject
sessions with unknown flags, so this permits drivers to be modified
to support this extension without requiring all drivers to change.
- Several data-related functions now have matching versions that
operate on an explicit buffer (e.g. crypto_apply_buf,
crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf).
- Most of the existing data-related functions operate on the input
buffer. However crypto_copyback always writes to the output buffer
if a request uses a separate output buffer.
- For the regions in input/output buffers, the following conventions
are followed:
- AAD and IV are always present in input only and their
fields are offsets into the input buffer.
- payload is always present in both buffers. If a request uses a
separate output buffer, it must set a new crp_payload_start_output
field to the offset of the payload in the output buffer.
- digest is in the input buffer for verify operations, and in the
output buffer for compute operations. crp_digest_start is relative
to the appropriate buffer.
- Add a crypto buffer cursor abstraction. This is a more general form
of some bits in the cryptosoft driver that tried to always use uio's.
However, compared to the original code, this avoids rewalking the uio
iovec array for requests with multiple vectors. It also avoids
allocate an iovec array for mbufs and populating it by instead walking
the mbuf chain directly.
- Update the cryptosoft(4) driver to support separate output buffers
making use of the cursor abstraction.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24545
Add a 'native_blocksize' member to 'struct enc_xform' that ciphers can
use if they support a partial final block. This is particular useful
for stream ciphers, but can also apply to other ciphers. cryptosoft
will only pass in native blocks to the encrypt and decrypt hooks. For
the final partial block, 'struct enc_xform' now has new
encrypt_last/decrypt_last hooks which accept the length of the final
block. The multi_block methods are also retired.
Mark AES-ICM (AES-CTR) as a stream cipher. This has some interesting
effects on IPsec in that FreeBSD can now properly receive all packets
sent by Linux when using AES-CTR, but FreeBSD can no longer
interoperate with OpenBSD and older verisons of FreeBSD which assume
AES-CTR packets have a payload padded to a 16-byte boundary. Kornel
has offered to work on a patch to add a compatiblity sysctl to enforce
additional padding for AES-CTR in esp_output to permit compatibility
with OpenBSD and older versions of FreeBSD.
AES-XTS continues to use a block size of a single AES block length.
It is possible to adjust it to support partial final blocks by
implementing cipher text stealing via encrypt_last/decrypt_last hooks,
but I have not done so.
Reviewed by: cem (earlier version)
Tested by: Kornel Dulęba <mindal@semihalf.com> (AES-CTR with IPsec)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24906
- Consistently use 'void *' for key schedules / key contexts instead
of a mix of 'caddr_t', 'uint8_t *', and 'void *'.
- Add a ctxsize member to enc_xform similar to what auth transforms use
and require callers to malloc/zfree the context. The setkey callback
now supplies the caller-allocated context pointer and the zerokey
callback is removed. Callers now always use zfree() to ensure
key contexts are zeroed.
- Consistently use C99 initializers for all statically-initialized
instances of 'struct enc_xform'.
- Change the encrypt and decrypt functions to accept separate in and
out buffer pointers. Almost all of the backend crypto functions
already supported separate input and output buffers and this makes
it simpler to support separate buffers in OCF.
- Remove xform_userland.h shim to permit transforms to be compiled in
userland. Transforms no longer call malloc/free directly.
Reviewed by: cem (earlier version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24855
There are no in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24775
It no longer has any in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24772
The sole in-tree user of this flag has been retired, so remove this
complexity from all drivers. While here, add a helper routine drivers
can use to read the current request's IV into a local buffer. Use
this routine to replace duplicated code in nearly all drivers.
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24450
- The linked list of cryptoini structures used in session
initialization is replaced with a new flat structure: struct
crypto_session_params. This session includes a new mode to define
how the other fields should be interpreted. Available modes
include:
- COMPRESS (for compression/decompression)
- CIPHER (for simply encryption/decryption)
- DIGEST (computing and verifying digests)
- AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
- ETA (combined auth and encryption using encrypt-then-authenticate)
Additional modes could be added in the future (e.g. if we wanted to
support TLS MtE for AES-CBC in the kernel we could add a new mode
for that. TLS modes might also affect how AAD is interpreted, etc.)
The flat structure also includes the key lengths and algorithms as
before. However, code doesn't have to walk the linked list and
switch on the algorithm to determine which key is the auth key vs
encryption key. The 'csp_auth_*' fields are always used for auth
keys and settings and 'csp_cipher_*' for cipher. (Compression
algorithms are stored in csp_cipher_alg.)
- Drivers no longer register a list of supported algorithms. This
doesn't quite work when you factor in modes (e.g. a driver might
support both AES-CBC and SHA2-256-HMAC separately but not combined
for ETA). Instead, a new 'crypto_probesession' method has been
added to the kobj interface for symmteric crypto drivers. This
method returns a negative value on success (similar to how
device_probe works) and the crypto framework uses this value to pick
the "best" driver. There are three constants for hardware
(e.g. ccr), accelerated software (e.g. aesni), and plain software
(cryptosoft) that give preference in that order. One effect of this
is that if you request only hardware when creating a new session,
you will no longer get a session using accelerated software.
Another effect is that the default setting to disallow software
crypto via /dev/crypto now disables accelerated software.
Once a driver is chosen, 'crypto_newsession' is invoked as before.
- Crypto operations are now solely described by the flat 'cryptop'
structure. The linked list of descriptors has been removed.
A separate enum has been added to describe the type of data buffer
in use instead of using CRYPTO_F_* flags to make it easier to add
more types in the future if needed (e.g. wired userspace buffers for
zero-copy). It will also make it easier to re-introduce separate
input and output buffers (in-kernel TLS would benefit from this).
Try to make the flags related to IV handling less insane:
- CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
member of the operation structure. If this flag is not set, the
IV is stored in the data buffer at the 'crp_iv_start' offset.
- CRYPTO_F_IV_GENERATE means that a random IV should be generated
and stored into the data buffer. This cannot be used with
CRYPTO_F_IV_SEPARATE.
If a consumer wants to deal with explicit vs implicit IVs, etc. it
can always generate the IV however it needs and store partial IVs in
the buffer and the full IV/nonce in crp_iv and set
CRYPTO_F_IV_SEPARATE.
The layout of the buffer is now described via fields in cryptop.
crp_aad_start and crp_aad_length define the boundaries of any AAD.
Previously with GCM and CCM you defined an auth crd with this range,
but for ETA your auth crd had to span both the AAD and plaintext
(and they had to be adjacent).
crp_payload_start and crp_payload_length define the boundaries of
the plaintext/ciphertext. Modes that only do a single operation
(COMPRESS, CIPHER, DIGEST) should only use this region and leave the
AAD region empty.
If a digest is present (or should be generated), it's starting
location is marked by crp_digest_start.
Instead of using the CRD_F_ENCRYPT flag to determine the direction
of the operation, cryptop now includes an 'op' field defining the
operation to perform. For digests I've added a new VERIFY digest
mode which assumes a digest is present in the input and fails the
request with EBADMSG if it doesn't match the internally-computed
digest. GCM and CCM already assumed this, and the new AEAD mode
requires this for decryption. The new ETA mode now also requires
this for decryption, so IPsec and GELI no longer do their own
authentication verification. Simple DIGEST operations can also do
this, though there are no in-tree consumers.
To eventually support some refcounting to close races, the session
cookie is now passed to crypto_getop() and clients should no longer
set crp_sesssion directly.
- Assymteric crypto operation structures should be allocated via
crypto_getkreq() and freed via crypto_freekreq(). This permits the
crypto layer to track open asym requests and close races with a
driver trying to unregister while asym requests are in flight.
- crypto_copyback, crypto_copydata, crypto_apply, and
crypto_contiguous_subsegment now accept the 'crp' object as the
first parameter instead of individual members. This makes it easier
to deal with different buffer types in the future as well as
separate input and output buffers. It's also simpler for driver
writers to use.
- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
This understands the various types of buffers so that drivers that
use DMA do not have to be aware of different buffer types.
- Helper routines now exist to build an auth context for HMAC IPAD
and OPAD. This reduces some duplicated work among drivers.
- Key buffers are now treated as const throughout the framework and in
device drivers. However, session key buffers provided when a session
is created are expected to remain alive for the duration of the
session.
- GCM and CCM sessions now only specify a cipher algorithm and a cipher
key. The redundant auth information is not needed or used.
- For cryptosoft, split up the code a bit such that the 'process'
callback now invokes a function pointer in the session. This
function pointer is set based on the mode (in effect) though it
simplifies a few edge cases that would otherwise be in the switch in
'process'.
It does split up GCM vs CCM which I think is more readable even if there
is some duplication.
- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
as an auth algorithm and updated cryptocheck to work with it.
- Combined cipher and auth sessions via /dev/crypto now always use ETA
mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
This was actually documented as being true in crypto(4) before, but
the code had not implemented this before I added the CIPHER_FIRST
flag.
- I have not yet updated /dev/crypto to be aware of explicit modes for
sessions. I will probably do that at some point in the future as well
as teach it about IV/nonce and tag lengths for AEAD so we can support
all of the NIST KAT tests for GCM and CCM.
- I've split up the exising crypto.9 manpage into several pages
of which many are written from scratch.
- I have converted all drivers and consumers in the tree and verified
that they compile, but I have not tested all of them. I have tested
the following drivers:
- cryptosoft
- aesni (AES only)
- blake2
- ccr
and the following consumers:
- cryptodev
- IPsec
- ktls_ocf
- GELI (lightly)
I have not tested the following:
- ccp
- aesni with sha
- hifn
- kgssapi_krb5
- ubsec
- padlock
- safe
- armv8_crypto (aarch64)
- glxsb (i386)
- sec (ppc)
- cesa (armv7)
- cryptocteon (mips64)
- nlmsec (mips64)
Discussed with: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23677
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
This amounts to a char ** since it is a char[8] *. Evil casts mostly
resolved the fact that what was actually passed in were plain char *.
Instead, change the DES functions to use 'unsigned char *' for keys
and for input and output buffers.
Reviewed by: cem, imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21389
Specifically, use 'const' for the key passed to the 'setkey' method
and 'const' for the 'iv' passed to the 'reinit' method.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21347
