Rather than reporting a page fault due to a bad PTE as a protection
violation with the "rsv" flag, treat these faults as a separate type of
fault altogether.
MFC after: 1 month
Change the pv_tracked flag to an int, just in case userspace decides to include
this file and defines BOOKE.
Guard this block from unintentional inclusion with ifdef BOOKE.
Reported by: emaste
Because link state change events aren't enabled until the end of init(),
the initial link up event could be missed. Check the current media status
immediately after enabling the default completion ring interrupt.
Approved by: sbruno
MFC after: 12 days
Sponsored by: Broadcom Limited
While there, make param.h guess proper MACHINE_ARCH on hardfloat targets
correctly as well, so tools like bmake can get their defaults right.
This does not help the kernel case, since we compile them with forced
-msoft-float and need to override an incorrect guess by param.h.
Reviewed by: br
Differential Revision: https://reviews.freebsd.org/D8574
This commit improves code styles like:
- removing commented code
- format comments as C-style
- add spaces after #define-s
It also bring ability to build kernel without INTRNG and remove RedBoot dependency.
Tested on FON2201
Submitted by: Hiroki Sato <yamori813@yahoo.co.jp>
Reviewed by: adrian, mizhka
Approved by: adrian(mentor)
Differential Revision: https://reviews.freebsd.org/D8557
This makes the file name and the variable naming in the file consistent.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
We'd better add this dependency explicitly, though usually the pci
driver is built into the kernel by default.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
Add the dependency on pci explicitly for the pcib and vmbus drivers.
The related Makefiles are updated accordingly too.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
- reset gen on down
- initialize admin task statically
- drain mp_ring on down
- don't drop context lock on stop
- reset error stats on down
- fix typo in min_latency sysctl
- return ENOBUFS from if_transmit if the driver isn't running or the link is down
Submitted by: mmacy@nextbsd.org
Reviewed by: shurd
MFC after: 2 days
Sponsored by: Isilon and Limelight Networks
Differential Revision: https://reviews.freebsd.org/D8558
.hg may reside above FreeBSD sources root. Provide function findvcs()
that will climb up and seek for presence of a VCS directory.
Reviewed by: imp (earlier version of the patch)
If full-offload scan is used, the NIC driver (or rather the firmware of
the NIC) should take care of interrupting and continuing the background
scan. So net80211 should ignore the vap->iv_bgscanidle setting then, instead
the NIC driver might look at this setting and pass it on to the firmware
in some way if possible.
Since full-offload scans won't be explicitly interrupted by net80211, it
also doesn't really make sense to check the vap->iv_bgscanidle condition
in that case, before starting a background scan. If the NIC driver
advertises background scan support and full-offload scanning, the firmware
should be able to execute that scan without interfering too much with our
data traffic.
Reviewed by: adrian, avos
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D8539
do any speculations about readahead, and use exactly the amount of readahead
specified by user. E.g. setting SF_FLAGS(0, SF_USER_READAHEAD) will guarantee
that no readahead at all will be performed.
sendfile_swapin() loop works this way:
- Find first invalid page in the request.
- Do vm_pager_has_page() and get count of pages, that can be taken in
single I/O.
- Trim valid pages from the end of the request.
- Cycle through the request and substitute to bogus_page all valid
pages that are in the middle of the request.
- After I/O launched (pager copies array of pages into buf(9), it
is important to restore proper page pointers with help vm_page_lookup().
Count bogus pages used and report them in sendfile stats.
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.
Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG. Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.
Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size. In some
cases efficiency stopped to almost as low as 50%. In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas. This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently. Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.
While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.
Sponsored by: iXsystems, Inc.
A bug in CAM's serial number hash logic resulted in SATA drives behind a SAS
controller getting removed and readded anytime the drive was rescanned for
any reason.
PR: 212914
Submitted by: kadesai
Reported by: kadesai
Reviewed by: asomers, ken
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
doesn't fit into a buf, then trim readbehind and readahead evenly. If
rbehind was limited by the previous BMAP, then roundup its trim to
block size.
- Add KASSERT to check that b_blkno has proper offset from original
blkno returned by BMAP. [1]
- Add KASSERT to check that pages in buf are consecutive.
Reviewed by: kib
Submitted by: kib [1]
This fixes an error handling detail in iwm_nvm_read_chunk(), where an
error response from the firmware for an NVM read shouldn't be fatal if
the offset was non-zero.
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD git 250a1c33fca1725121fe499f9cebc90267d209f9
Differential Revision: https://reviews.freebsd.org/D8542
The salt based checksum mechanisms, such as skein, are storing the seed
in spa structure, and need to access the spa to use the seed. The current
mechanism for quick access to correct spa is via pointer provided by
vdev structure, but unfortunately the current code does set spa only
for the leaf vdev. This patch will fix the issue by making sure the
loader zfs reader will set spa also for top-level vdevs.
PR: 214375
Reported by: lstewart
Reviewed by: allanjude, imp
Approved by: allanjude (mentor), imp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8487
The https://reviews.freebsd.org/rS308434 did change the return type for
dv_print callbacks, but the return type for beri_sdcard_disk_print()
was left unchanged, causing compile errors.
Reported by: cy
Reviewed by: brooks, rstone, allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8515
Do not assume that all uart drivers use uart_softc structure as is.
Some do a sensible thing and do declare their uart class and driver
properly and arrive into uart_bus_attach with suitably sized softc.
Submitted by: kan
Sponsored by: DARPA, AFRL
The gpiobus driver is attached explicitly and generally should be
at the same pass as its parent. Making it use BUS_PAS_BUS ensures
that it attaches immediately after parent adds it (assuming the
parent itself attached at BUS_PAS_BUS and above).
Submitted by: kan
Sponsored by: DARPA, AFRL
contiguous memory but in one path we did not always guarantee this,
thus do a m_pullup() there.
PR: 214385
Submitted by: Joe Jones (joeknockando googlemail.com)
MFC after: 3 days
either in the CLOSING or LAST-ACK state.
Reviewed by: hiren
MFC after: 3 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8371
This is Infineon ADM6996FC/M/MX driver code on etherswitch framework.
Support PORT and DOT1Q VLAN.
This code suppose ADM6996FC SDC/SDIO connect to SOC network interface
MDC/MDIO.
This code tested on Netgear WGR614Cv7.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: adrian, mizhka
Approved by: adrian(mentor)
Differential Revision: https://reviews.freebsd.org/D8495
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
The feature enables us to pass through physical PCIe devices to FreeBSD VM
running on Hyper-V (Windows Server 2016) to get near-native performance with
low CPU utilization.
The patch implements a PCI bridge driver to support the feature:
1) The pcib driver talks to the host to discover device(s) and presents
the device(s) to FreeBSD's pci driver via PCI configuration space (note:
to access the configuration space, we don't use the standard I/O port
0xCF8/CFC method; instead, we use an MMIO-based method supplied by Hyper-V,
which is very similar to the 0xCF8/CFC method).
2) The pcib driver allocates resources for the device(s) and initialize
the related BARs, when the device driver's attach method is invoked;
3) The pcib driver talks to the host to create MSI/MSI-X interrupt
remapping between the guest and the host;
4) The pcib driver supports device hot add/remove.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8332
The new methods will be used by the coming pcib driver.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8409
vcpu_id is host's representation of guest CPU.
We get the mapping between vcpu_id and FreeBSD kernel's cpu id when VMBus
driver is loaded. Later, when a driver, like the coming pcib driver, talks
to the host and needs to refer to a guest CPU, the driver must use the
vcpu_id.
Reviewed by: jhb, sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8410
Drop the tracking down to the pmap layer, with optimizations to only track
necessary pages. This should give a (slight) performance improvement, as well
as a stability improvement, as the tracking is already mostly handled by the
pmap layer.
Core kernel is always compiled with -msoft-float on all of our platforms,
make sure we follow the suit with trampoline as well.
Reviewed by: adrian, br, imp
Differential Revision: https://reviews.freebsd.org/D8507
Summary:
This implements part of the gpio-poweroff and gpio-restart device tree
bindings. Optional properties are not handled currently. It also currently
only supports level-triggered reset.
Reviewed By: gonzo
Differential Revision: https://reviews.freebsd.org/D8521
Rather than printing a warning for every time we receive a fileid > 2^32
from the NFS server, count warnings and print at most one of each warning
type per minute, e.g.,
Nov 15 05:17:34 ip-172-30-1-221 kernel: NFSv4 fileid > 32bits (24730 occurrences)
Nov 15 05:17:56 ip-172-30-1-221 kernel: NFSv4 mounted on fileid > 32bits (178 occurrences)
Nov 15 05:18:53 ip-172-30-1-221 kernel: NFSv4 fileid > 32bits (7582 occurrences)
Nov 15 05:18:58 ip-172-30-1-221 kernel: NFSv4 mounted on fileid > 32bits (23 occurrences)
A buildworld with an NFS mounted /usr/obj can otherwise result in
hundreds of thousands of lines being printed, which seems unnecessarily
verbose.
When ino_t becomes a 64-bit type, these printfs will no longer be needed
(and the problems associated with truncating 64-bit fileids to generate
32-bit inode numbers will also go away).
Reviewed by: rmacklem
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8523
