ENAv2 introduces many new features, bug fixes and improvements.
Main new features are LLQ (Low Latency Queues) and independent queues
reconfiguration using sysctl commands.
The year in copyright notice was updated to 2019.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
For easier debugging, the reset is being triggered and the reset reason is
being set only in case it is done for the first time. Such approach will
ensure that the first reset reason is not going to be overwritten and
will make it easier for debugging.
Also, add a reset trigger upon invalid Tx requested ID.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the call to ena_up() in ena_restore_device() fails, next usage of
`ifconfig up` will cause NULL pointer dereference.
This patch adds additional checks to prevent that.
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Some messages were missing new line character and traces were not having
unified behavior. To fix that, each trace and printout should add new
line character at the end of each string - that should improve
readability.
Submitted by: Rafal Kozik <rk@semihalf.com>
Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the headers of the packets are split into multiple segments of the
mbuf chain, the previous version of ena_tx_csum which was assuming,
that all segments will lay in the first mbuf, will eventually fail to
map the headers properties to meta descriptor.
That will cause Tx checksum offload to do not work and was leading to
memory corruption. It could even cause the crash of the system.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
For alignment with Linux driver and better handling ena_detach(), the
reset is now calling ena_device_restore() and ena_device_destroy().
The ena_device_destroy() is also being called on ena_detach(), so the
code will be more readable.
The watchdog is now being activated after reset only, if it was active
before.
There were added additional checks to ensure, that there is no race with
the link state change AENQ handler.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As the ENA can have multiple states turned on/off, it is more convenient
to store them in single bitfield instead of multiple boolean variables.
The bitset FreeBSD API was used for the bitfield implementation, as it
provides flexible structure together with API which also supports atomic
bitfield operations.
For better readability basic macros from API were wrapped into custom
ENA_FLAG_* macros, which are filling up common parameters for all calls.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Before the patch, error handling was not releasing all resources and
was not issuing device reset if the reset task failed.
That could cause memory leak and fault of the device.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The host info bdf field is the abbreviation for the bus, device,
function of the PCI on which the device is being attached to.
Now the driver is filling information about that using FreeBSD RID
resource.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The new ENA HAL is introducing API, which can determine on Tx path if
the doorbell is needed.
That way, it can tell the driver, that it should call an doorbell.
The old threshold value wasn't removed, as not all HW is supporting this
feature - so it was reworked to also work with the new API.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The Rx ring size can be as high as 8k. Because of that we want to limit
the cleanup threshold by maximum value of 256.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
LLQ (Low Latency Queue) is the feature, that allows pushing header
directly to the device through PCI before even DMA is triggered.
It reduces latency, because device can start preparing packet before
payload is sent through DMA.
To speed up sending data through PCI, the Write Combining is enabled,
which allows hardware to buffer data before sending them on the PCI - it
allows to reduce number of PCI IO operations.
ENAv2 is using special descriptor for the negotiation of the LLQ.
Currently, only the default configuration is supported.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Handle IO interrupts using filter routine. That way, the main cleanup
task could be moved to the separate thread using taskqueue.
The deferred Rx cleanup task was removed, and now the cleanup task is
begin called instead. That way, the Rx lock could be removed.
In addition, Queue management (wake up and stop TX ring) was added, so
the TX cleanup task can be performed mostly lockless.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The driver now supports per adapter tuning of buffer ring size and HW Rx
ring size.
It can be achieved using sysctl node dev.ena.X.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the requested ID was out of range, the tx_info structure was NULL and
the function was trying to access the field of the NULL object.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The if_detach was causing crash if the MSI-x configuration in the attach
failed. To prevent this issue, the ifnet is being configured at the end
of the attach function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
In rare case, when the ifconfig is called just before kldunload, it is
possible, that ena_up routine will be called after queue locks are
released.
To prevent that, ifp is detached before the last ena_down is called and
further, the ifp is freed at the end of the function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The ENA driver needs at least 2 MSI-x - one for admin queue, and one for
IO queues pair. If there were not enough resources to allocate more than
one MSI-x, the device should not be attached.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
bus_alloc_resource_any() is not returning error value in case of an
error.
If the function call fails, the error value was not passed to the
ena_up() function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
To prevent errors from assigning values from the DMA structure in case
of an error, zero the vaddr and paddr values upon failure.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The DMA in FreeBSD requires explicit synchronization. ENA driver was
only doing PREREAD and PREWRITE synchronizations. Missing
bus_dmamap_sync() calls were added.
It is also required to synchronize DMA engine before unloading DMA map.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the first MSI-x won't be executed, then the timer service will detect
that and trigger device reset.
The checking for missing Tx completion was reworked, so it will also
check for missing interrupts. Checking number of missing Tx completions
can be performed after loop, instead of checking it every iteration.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The new ena_com allows the number of CPUs to be passed to the device in
the host info structure as a hint.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Information about Tx error should be only displayed, if packet
preparation failed due to error other than out of memory.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Whenever the driver will receive too many descriptors from the device,
it should trigger the device reset, as it is indicating that the device
is in invalid state.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Receive Side Scaling is optional feature that could be enabled in kernel
configuration by defining flag RSS.
Kernel uses hash to store and find protocol control block which is
stored in hash tables.
Kernel and NIC hash functions must be consistent. Otherwise case lookup
fails.
To achieve this kernel provides API to set proper hash key to NIC.
As it is not possible to change key for virtual ENA NIC, this driver
cannot support RSS function.
ENA is designed to work in virtual environments so supporting hardware
version of this card is unnecessary.
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Notification AENQ handler is responsible for handling requests from ENA
device. Missing Tx threshold, Tx timeout and keep alive timeout can be
set using hints from the aenq descriptor which can be delivered in the
ENA admin notification.
The queue suspending and resuming tasks are not supported by the
driver.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
ENA_ADMIN_FATAL_ERROR and ENA_ADMIN_WARNING aenq groups were indicated
as supported, so the unimplemented_aenq_handler() will print out error
message, whenever an error will occur within the ENA admin context.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As the ENA is working only in virtualized environment, the active media
is not specified. Instead, the active link type is set as unknown.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Recent HAL change preparing to support ENAv2 required minor driver
modifications.
The ena_com_sq_empty_space() is not available in this ena-com, so it had
to be replaced with ena_com_free_desc().
Moreover, the ena_com_admin_init() is no longer using 3rd argument
indicating if the spin lock should be initialized, so it was removed.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
the code is not guarded by the if clause and has misleading indentation.
Approved by: scottl
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20427
Since drm2 removal, there has not been any consumer of the feature in the
tree. I am also unaware of any out-of-tree consumer.
More importantly, the feature has been broken from the very start, both
before and after r306589, because the ivar was set on a device that does
not support it and it was read from another device that also does not
support it.
A bus-wide no-stop flag cannot be implemented as an ivar as iicbus
attaches as a child of various drivers. Implementing the ivar in each
and every I2C driver is just impractical.
If we ever want to implement this feature properly, then probably the
easiest way to do it would be via a flag in the softc of iicbus.
In fact, we might have to do that in the stable branches if we want to
fix the code for them.
Reported by: ian (long time ago)
MFC after: 1 month (maybe)
X-MFC-note: cannot just merge the change, must keep drm2 happy
As I see, different NICs in different configurations may have different
numbers of TX and RX queues. The code was assuming 1:1 mapping between
event queues (interrupts) and TX/RX queues. Since number of interrupts
is set to maximum of TX and RX queues, when those two are different, the
system is doomed.
I have no documentation or deep knowledge about this hardware, so this
change is based on general observations and code reading. If some of my
guesses are wrong, please do better. I just confirmed HP NC550SFP NICs
are working now.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Prior to this revision, vtpci's BUS_READ_IVAR method on VIRTIO_IVAR_SUBVENDOR
accidentally returned the PCI subdevice.
The typo seems to have been introduced with the original commit adding
VIRTIO_IVAR_{{SUB,}DEVICE,{SUB,}VENDOR} to virtio_pci. The commit log and code
strongly suggest that the ivar was intended to return the subvendor rather than
the subdevice; it was likely just a copy/paste mistake.
Go ahead and rectify that.
- Perform ifp mismatch checks (to determine if a send tag is allocated
for a different ifp than the one the packet is being output on), in
ip_output() and ip6_output(). This avoids sending packets with send
tags to ifnet drivers that don't support send tags.
Since we are now checking for ifp mismatches before invoking
if_output, we can now try to allocate a new tag before invoking
if_output sending the original packet on the new tag if allocation
succeeds.
To avoid code duplication for the fragment and unfragmented cases,
add ip_output_send() and ip6_output_send() as wrappers around
if_output and nd6_output_ifp, respectively. All of the logic for
setting send tags and dealing with send tag-related errors is done
in these wrapper functions.
For pseudo interfaces that wrap other network interfaces (vlan and
lagg), wrapper send tags are now allocated so that ip*_output see
the wrapper ifp as the ifp in the send tag. The if_transmit
routines rewrite the send tags after performing an ifp mismatch
check. If an ifp mismatch is detected, the transmit routines fail
with EAGAIN.
- To provide clearer life cycle management of send tags, especially
in the presence of vlan and lagg wrapper tags, add a reference count
to send tags managed via m_snd_tag_ref() and m_snd_tag_rele().
Provide a helper function (m_snd_tag_init()) for use by drivers
supporting send tags. m_snd_tag_init() takes care of the if_ref
on the ifp meaning that code alloating send tags via if_snd_tag_alloc
no longer has to manage that manually. Similarly, m_snd_tag_rele
drops the refcount on the ifp after invoking if_snd_tag_free when
the last reference to a send tag is dropped.
This also closes use after free races if there are pending packets in
driver tx rings after the socket is closed (e.g. from tcpdrop).
In order for m_free to work reliably, add a new CSUM_SND_TAG flag in
csum_flags to indicate 'snd_tag' is set (rather than 'rcvif').
Drivers now also check this flag instead of checking snd_tag against
NULL. This avoids false positive matches when a forwarded packet
has a non-NULL rcvif that was treated as a send tag.
- cxgbe was relying on snd_tag_free being called when the inp was
detached so that it could kick the firmware to flush any pending
work on the flow. This is because the driver doesn't require ACK
messages from the firmware for every request, but instead does a
kind of manual interrupt coalescing by only setting a flag to
request a completion on a subset of requests. If all of the
in-flight requests don't have the flag when the tag is detached from
the inp, the flow might never return the credits. The current
snd_tag_free command issues a flush command to force the credits to
return. However, the credit return is what also frees the mbufs,
and since those mbufs now hold references on the tag, this meant
that snd_tag_free would never be called.
To fix, explicitly drop the mbuf's reference on the snd tag when the
mbuf is queued in the firmware work queue. This means that once the
inp's reference on the tag goes away and all in-flight mbufs have
been queued to the firmware, tag's refcount will drop to zero and
snd_tag_free will kick in and send the flush request. Note that we
need to avoid doing this in the middle of ethofld_tx(), so the
driver grabs a temporary reference on the tag around that loop to
defer the free to the end of the function in case it sends the last
mbuf to the queue after the inp has dropped its reference on the
tag.
- mlx5 preallocates send tags and was using the ifp pointer even when
the send tag wasn't in use. Explicitly use the ifp from other data
structures instead.
- Sprinkle some assertions in various places to assert that received
packets don't have a send tag, and that other places that overwrite
rcvif (e.g. 802.11 transmit) don't clobber a send tag pointer.
Reviewed by: gallatin, hselasky, rgrimes, ae
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20117
The point of r345008 was to reset the Command Reference Number (CRN)
in some situations where a device stayed in the topology, but had
changed somehow.
This can include moving from a switch connection to a direct
connection or vice versa, or a device that temporarily goes away
and comes back. (e.g. moving to a different switch port)
There were a couple of bugs in that change:
- We were reporting that a device had not changed whenever the
Establish Image Pair bit was not set. That is not quite correct.
Instead, if the Establish Image Pair bit stays the same (set or
not), the device hasn't changed in that way.
- We weren't setting PRLI Word0 in the port database when a new
device arrived, so comparisons with the old value for the
Establish Image Pair bit weren't really possible. So, make sure
PRLI Word0 is set in the port database for new devices.
- We were resetting the CRN whenever the Establish Image Pair bit
was set for a device, even when the device had stayed the same
and the value of the bit hadn't changed. Now, only reset the
CRN for devices that have changed, not devices that sayed the
same.
The result of all of this was that if we had a single FC device on
an FC port and it went away and came back, we would wind up
correctly resetting the CRN.
But, if we had multiple devices connected via a switch, and there
was any change in one or more of those devices, all of the devices
that stayed the same would also have their CRN values reset.
The result, from a user standpoint, is that the tape drives, etc.
would all start to time out commands and the initiator would send
aborts.
sys/dev/isp/isp.c:
In isp_pdb_add_update(), look at whether the Establish
Image Pair bit has changed as part of the check to
determine whether a device is still the same. This was
causing erroneous change notifications. Also, when
creating a new port database entry, initialize the
PRLI Word 0 values.
sys/dev/isp/isp_freebsd.c:
In isp_async(), in the changed/stayed case, instead of
looking at the Establish Image Pair bit to determine
whether to reset the CRN, look at the command value.
(Changed vs. Stayed.) Only reset the CRN for devices
that have changed.
Sponsored by: Spectra Logic
MFC after: 3 days
That made, for example, gpioc -l output quite hard to read and parse.
Also, fix formatting of a nearby statement with too long lines.
MFC after: 2 weeks
Pull the responsibility for zeroing events, which is general to any
conceivable implementation of a random device algorithm, out of the
algorithm-specific Fortuna code and into the callers. Most callers
indirect through random_fortuna_process_event(), so add the logic there.
Most callers already explicitly bzeroed the events they provided, so the
logic in Fortuna was mostly redundant.
Add one missing bzero in randomdev_accumulate(). Also, remove a redundant
bzero in the same function -- randomdev_hash_finish() is obliged to bzero
the hash state.
Reviewed by: delphij
Approved by: secteam(delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20318
This takes the SPCR code currently in uart_cpu_arm64.c, moves it into
a new uart_cpu_acpi.c (with some associated refactoring), and uses it
from both arm64 and x86.
An SPCR serial port address AccessWidth field value of 0 ("reserved")
is now treated as 1 ("byte access") in order to work around a buggy
SPCR table on Amazon EC2 i3.metal instances.
Reviewed by: manu, Greg V
MFC after: 3 days
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D20357