Commit Graph

536 Commits

Author SHA1 Message Date
Andrew Rybchenko
1aa1b495ed sfxge(4): improve RxQ label init prototype
RxQ type provides more information which may be useful to
setup event queue appropriately.

Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18098
2018-11-23 11:38:50 +00:00
Andrew Rybchenko
e50a6f3eb4 sfxge(4): support MUM/SUC firmware partitions
Submitted by:   Andrew Lee <alee at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18097
2018-11-23 11:31:57 +00:00
Andrew Rybchenko
1b5bd0997a sfxge(4): fix ignoring function return value
fix PreFAST issue, add missing annotation that function return value
should not be ignored. Fix alignment.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18096
2018-11-23 11:31:45 +00:00
Andrew Rybchenko
e7144483bb sfxge(4): quieten get version methods
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18095
2018-11-23 10:22:01 +00:00
Andrew Rybchenko
0ab1d25fc4 sfxge(4): remove duplicate NVRAM asserts
The checking performed in the ->envo_type_to_partn
internal method make these assertions unnecessary.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18094
2018-11-23 10:21:50 +00:00
Andrew Rybchenko
ede1a3edaa sfxge(4): precheck and verify flash writes
Read existing flash content before writing, so the flash write can be
avoided if the existing partition content matches the new image. This
avoids unnecessary write cycles for the flash device, and may also be
faster. If the flash does need to be updated, verify the content after
writing.

Note that reading the flash content after writing but before calling
efx_nvram-rw_finish() avoids firmware bug68170, which can lead to
signed image updates failing on Medford.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18093
2018-11-23 10:21:36 +00:00
Andrew Rybchenko
6a869fec96 sfxge(4): fix check in NVRAM validate
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18092
2018-11-23 10:21:28 +00:00
Andrew Rybchenko
558eb6e7f1 sfxge(4): report correct partition write chunk size
If the firmware reports a non-zero write chunk size then nvram writes
may fail if a different granularity is used (e.g. for MUM firmware on
Sorrento).

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18091
2018-11-23 10:21:17 +00:00
Andrew Rybchenko
3d670ff531 sfxge(4): check NVRAM locking by partition ID
Tracking which partition is locked avoids being overly conservative
when EFX_NVRAM_xxx maps to more than one partition (depnding on the
current port number).

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18090
2018-11-23 10:21:06 +00:00
Andrew Rybchenko
8241ccd203 sfxge(4): simplify NVRAM type to partition mappings
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18089
2018-11-23 10:20:55 +00:00
Andrew Rybchenko
348d35299c sfxge(4): rename firmware update verify result cap field
The existing name confuses support for secure boot with
support for reporting a verify result after an NVRAM update.

As the capability only reports support for returning a verify
result, change the name to be less confusing.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18088
2018-11-23 10:20:44 +00:00
Andrew Rybchenko
d5106d0503 sfxge(4): extend NVRAM RW finish to return verify result
Extend efx_nvram_rw_finish() to return firmware verify result code.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18087
2018-11-23 10:20:32 +00:00
Andrew Rybchenko
a21b2f207d sfxge(4): report verify result from RW finish callback
This makes the verify result visible to efx_nvram_rw_finish(), which
can be extended to report it in a later patch.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18086
2018-11-23 10:20:20 +00:00
Andrew Rybchenko
f0d3455bf8 sfxge(4): simplify verify result handling
Simplify verify result handling in NVRAM update finish

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18085
2018-11-23 10:20:08 +00:00
Andrew Rybchenko
c703323657 sfxge(4): fix result code in MCDI NVRAM update finish
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18084
2018-11-23 10:19:57 +00:00
Andrew Rybchenko
4fe33ae862 sfxge(4): copy new header from firmware src
Submitted by:   Andrew Jackson <ajackson at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18083
2018-11-23 10:19:46 +00:00
Andrew Rybchenko
44d836f8d0 sfxge(4): add RSS key size define
Submitted by:   Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18082
2018-11-23 09:16:07 +00:00
Andrew Rybchenko
e9038435e7 sfxge(4): add API to set an RSS context for a filter
Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18081
2018-11-23 09:15:56 +00:00
Andrew Rybchenko
82af879c05 sfxge(4): update RSS API to take RSS context parameter
Update efx_rx_scale_mode_set(), efx_rx_scale_key_set()
and efx_rx_scale_tbl_set().

Submitted by:   Mark Spender <mspender at solarflare.com>
Submitted by:   Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18080
2018-11-23 09:15:44 +00:00
Andrew Rybchenko
e6d55a0b58 sfxge(4): add API to allocate and free RSS contexts
Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18079
2018-11-23 09:15:32 +00:00
Andrew Rybchenko
39023729c3 sfxge(4): rename API to check Rx scale and hash support
Rename efx_rx_scale_support_get() to efx_rx_scale_default_support_get(),
and efx_rx_hash_support_get() to efx_rx_hash_default_support_get().

All these really report is whether an exclusive RSS context was
successfully acquired at efx_rx_init().

efx_rx_scale_support_get() sounds like it reports whether the device
supports RSS, and whether exclusive or shared contexts are supported,
but it doesn't do that. Renaming it to
efx_rx_scale_default_support_get() helps to reflect that it reports
what RSS support the client gets without trying to allocate RSS
contexts itself.

Also rename efx_rx_scale_support_t to efx_rx_scale_context_type_t, to
make the enum more suitable for specifying the type of an RSS context
to be allocated.

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18078
2018-11-23 09:15:20 +00:00
Andrew Rybchenko
7283cea3c5 sfxge(4): add the max number of RSS exclusive contexts
The patch adds enc_rx_scale_max_exclusive_contexts member
to nic_cfg_t structure and sets the corresponding values
for Siena, Huntington and Medford

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18077
2018-11-23 09:15:08 +00:00
Andrew Rybchenko
7ae12f5b45 sfxge(4): fix default RSS context check on Siena
Default RSS context check is carried out during filter
insertion on Siena and it needs to be fixed

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18076
2018-11-23 09:14:57 +00:00
Andrew Rybchenko
c09d2224f7 sfxge(4): define a handle to denote default RSS context
Make the existing filter-specific define more general.
This is the same as MC_CMD_RSS_CONTEXT_ALLOC_OUT_RSS_CONTEXT_ID_INVALID.

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18075
2018-11-23 09:14:45 +00:00
Andrew Rybchenko
f4e2f6a5b3 sfxge(4): insert filters for encapsulated packets
On Medford, with full-featured firmware running, encapsulated
packets may not be delivered unless filters are inserted for
them, as ordinary filters are not applied to encapsulated
packets. So filters for encapsulated packets need to be
inserted for each class of encapsulated packet. For simplicity,
catch-all filters are always inserted. These may match more
packets than the OS has asked for, but trying to insert more
precise filters increases complexity for little gain.

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18074
2018-11-23 09:03:32 +00:00
Andrew Rybchenko
127ef94733 sfxge(4): support filters for encapsulated packets
This supports filters which match all unicast or multicast
inner frames in VXLAN, GENEVE, or NVGRE packets.
(Additional fields to match on can be added easily.)

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18073
2018-11-23 09:03:20 +00:00
Andrew Rybchenko
540c7dd5d9 sfxge(4): use proper MCDI command for encap filters
MC_CMD_FILTER_OP_IN_EXT is needed to set filters for encapsulated
packets.

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18072
2018-11-23 09:03:09 +00:00
Andrew Rybchenko
799fadbeb5 sfxge(4): provide information about supported tunnels
VXLAN/NVGRE (and Geneve) support is available on SFN8xxx with
full-feature firmware variant running.

Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18071
2018-11-23 09:02:58 +00:00
Andrew Rybchenko
7e1059e821 sfxge(4): let caller know that queue is already flushed
Tx/Rx queue may be already flushed due to Tx/Rx error on the queue or
MC reboot. Caller needs to know that the queue is already flushed to
avoid waiting for flush done event.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18070
2018-11-23 07:50:56 +00:00
Andrew Rybchenko
73b39f6834 sfxge(4): fix error code usage
MCDI results returned in req.emr_rc have already been translated
from MC_CMD_ERR_* to errno names, so using an MC_CMD_ERR_* value
is incorrect.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18069
2018-11-23 07:50:45 +00:00
Andrew Rybchenko
454502b9f1 sfxge(4): fix out of bounds read in VIs allocation
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18068
2018-11-23 07:50:34 +00:00
Andrew Rybchenko
8302d100a0 sfxge(4): fix potential buffer overflow in Tx queue init
Improve error checking to avoid a caller overflowing the MCDI
request buffer if the requested TXQ size was excessively large.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18067
2018-11-23 07:50:22 +00:00
Andrew Rybchenko
1695ac20dc sfxge(4): fix failure path in EF10 Tx queue PIO enable
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18066
2018-11-23 07:43:44 +00:00
Andrew Rybchenko
d55882df3e sfxge(4): add advanced function to extract FW version
Some libefx-based drivers might need this functionality to
indicate DPCPU FW IDs as part of FW version info to assist
experienced users.

Submitted by:   Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18065
2018-11-23 07:38:59 +00:00
Andrew Rybchenko
31e518b4c4 sfxge(4): add MCDI agnostic wrapper for MAC stats clear
If a libefx-based driver needs some way to clear port statistics,
then an MCDI agnostic method is required.

Submitted by:   Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18064
2018-11-23 07:26:37 +00:00
Andrew Rybchenko
d343a7f403 sfxge(4): limit max TXQ size on Medford to 2048
Queues with 4096 descriptors are not supported as the top bit is used for vfifo
stuffing.

Submitted by:   Mark Spender <mspender at solarflare.com>
Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision:  https://reviews.freebsd.org/D8948
2018-11-22 16:15:24 +00:00
Andrew Rybchenko
8e0c482762 sfxge(4): support packed stream Rx mode in libefx
Submitted by:   Artem V. Andreev <Artem.Andreev@oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18022
2018-11-22 14:31:35 +00:00
Andrew Rybchenko
621cf62162 sfxge(4): cleanup: move into right place
Due to incorrect merge the piece of code was put in incorrect
place and diverge from libefx in other locations.

Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18024
2018-11-22 14:10:46 +00:00
Matt Macy
d7c5a620e2 ifnet: Replace if_addr_lock rwlock with epoch + mutex
Run on LLNW canaries and tested by pho@

gallatin:
Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5
based ConnectX 4-LX NIC, I see an almost 12% improvement in received
packet rate, and a larger improvement in bytes delivered all the way
to userspace.

When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1,
I see, using nstat -I mce0 1 before the patch:

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
4.98   0.00   4.42   0.00 4235592     33   83.80 4720653 2149771   1235 247.32
4.73   0.00   4.20   0.00 4025260     33   82.99 4724900 2139833   1204 247.32
4.72   0.00   4.20   0.00 4035252     33   82.14 4719162 2132023   1264 247.32
4.71   0.00   4.21   0.00 4073206     33   83.68 4744973 2123317   1347 247.32
4.72   0.00   4.21   0.00 4061118     33   80.82 4713615 2188091   1490 247.32
4.72   0.00   4.21   0.00 4051675     33   85.29 4727399 2109011   1205 247.32
4.73   0.00   4.21   0.00 4039056     33   84.65 4724735 2102603   1053 247.32

After the patch

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
5.43   0.00   4.20   0.00 3313143     33   84.96 5434214 1900162   2656 245.51
5.43   0.00   4.20   0.00 3308527     33   85.24 5439695 1809382   2521 245.51
5.42   0.00   4.19   0.00 3316778     33   87.54 5416028 1805835   2256 245.51
5.42   0.00   4.19   0.00 3317673     33   90.44 5426044 1763056   2332 245.51
5.42   0.00   4.19   0.00 3314839     33   88.11 5435732 1792218   2499 245.52
5.44   0.00   4.19   0.00 3293228     33   91.84 5426301 1668597   2121 245.52

Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch

Reviewed by:	gallatin
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
Brooks Davis
541d96aaaf Use an accessor function to access ifr_data.
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size).  This is believed to be sufficent to
fully support ifconfig on 32-bit systems.

Reviewed by:	kib
Obtained from:	CheriBSD
MFC after:	1 week
Relnotes:	yes
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D14900
2018-03-30 18:50:13 +00:00
Eitan Adler
caa7e52f3f kernel: Fix several typos and minor errors
- duplicate words
- typos
- references to old versions of FreeBSD

Reviewed by:	imp, benno
2017-12-27 03:23:21 +00:00
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Andrew Rybchenko
2fb1df8fe0 sfxge(4): compact the first hot part of RxQ control
buf_base_id is used on RxQ control operations only and not used on
datapath.

Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2017-01-27 11:59:02 +00:00
Andrew Rybchenko
ecfb79144f sfxge(4): fix RxQ structure layout vs usage on datapath
Recent changes in the pseudo header accessor prototypes start to
use common code RxQ handle on datapath. The handle was located
at the end of the structure with members not used on datapath.

Reviewed by:    philip
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision:  https://reviews.freebsd.org/D9359
2017-01-27 11:57:19 +00:00
Andrew Rybchenko
1baf03a4dc sfxge(4): fix invalid VLAN tagging after stop/start
TxQ is destroyed on stop and last used tag should be reset to default 0
on the next start.

Reviewed by:    philip
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision:  https://reviews.freebsd.org/D9358
2017-01-27 11:56:18 +00:00
Andrew Rybchenko
a7668ace83 sfxge(4): cleanup: remove unused soft context struct member rxq_cache
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2017-01-27 08:54:33 +00:00
Andrew Rybchenko
a18fb3eed5 sfxge(4): cleanup: remvoe trailing tab
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2017-01-27 08:53:11 +00:00
Andrew Rybchenko
5c4dffdfb7 sfxge(4): cleanup: remove unused txq_index TxQ control structure member
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2017-01-27 08:51:48 +00:00
Andrew Rybchenko
a0e88689f0 sfxge(4): add sysctl to change MAC stats update period
The sysctl controls the period per interface.

Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision:  https://reviews.freebsd.org/D9153
2017-01-12 15:26:23 +00:00
Andrew Rybchenko
58223d5b7a sfxge(4): add tunable to configure MAC stats update period
Reviewed by:    philip
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision:  https://reviews.freebsd.org/D9151
2017-01-12 13:00:17 +00:00