The links were to cope with the switch to upstream dts.
We don't need them anymore.
While here add the rest of the beaglebone family dts as u-boot is common
on all those boards and load the dtb based on the product name.
This just miss the pocketbeagle variant as it's not yet in sys/gnu/dts but
will be with the Linux 4.18 dts import.
Summary:
Some architectures, in this case powerpc64, need explicit synchronization
barriers vs device accesses.
Prior to this change, when running 'make buildworld -j72' on a 18-core
(72-thread) POWER9, I would see controller resets often. With this change, I
don't see these resets messages, though another tester still does, for yet to be
determined reasons, so this may not be a complete fix. Additionally, I see a
~5-10% speed up in buildworld times, likely due to not needing to reset the
controller.
Reviewed By: jimharris
Differential Revision: https://reviews.freebsd.org/D16570
- Properly handle snprintf return value for truncation and avoid
overflowing the later write with the bogus length.
- Increase the msgbufr size to handle a rename of 2 full files.
The larger allocation causes a slight performance hit which will be mitigated
in the future. A rewrite with sbufs will likely be done as well.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
MFC after: 2 weeks
Approved by: so (gtetlow)
Reviewed by: kib
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D16098
number of sectors reported through the BIOS. Cylinders * heads *
sectors may not necessarily be equal to the total number of sectors
reported through int13h function 48h.
An example of this is when a Mediasonic HD3-U2B PATA to USB enclosure
with a 80 GB disk is attached. Loader hangs at line 506 of
stand/i386/libi386/biosdisk.c while attempting to read sectors beyond
the end of the disk, sector 156906855. I discovered that the Mediasonic
enclosure was reporting the disk with 9767 cylinders, 255 heads, 63
sectors/track. That's 156906855 sectors. However camcontrol and
Windows 10 both report report the disk having 156301488 sectors, not
the calculated value. At line 280 biosdisk.c sets the sectors to the
higher of either bd->bd_sectors or the total calculated at line 276
(156906855) instead of the lower and correct value of 156301488 reported
by int 13h 48h.
This was tested on all three of my Mediasonic HD3-U2B PATA to USB
enclosures.
Instead of using the higher of bd_sectors (returned by int13h) or the
calculated value, this patch uses the lower and safer of the values.
Reviewed by: tsoome@
Differential Revision: https://reviews.freebsd.org/D16577
The lib32 build was already building the i386 version of
the clang sanitizers (libclang_rt) but they were not being
installed. This enables the installation.
MK_TOOLCHAIN=no was originally added to the install make
environment to disable includes so that NO_INCS could be
removed. The MK_TOOLCHAIN in bsd.incs.mk was subsequently
renamed to MK_INCLUDES, but bsd.lib.mk doesn't even include
bsd.incs.mk when LIBRARIES_ONLY is defined which the install
make environment for compat libs now defines. However,
setting MK_TOOLCHAIN=no forced MK_CLANG=no which disabled
libclang_rt during the install32 phase. Remove MK_TOOLCHAIN=no
since LIBRARIES_ONLY is now sufficient.
Since the libcompat environment overrides both LIBDIR and
SHLIBDIR, libclang_rt/Makefile.inc has to set both variables
to force the libraries to be installed to the location
expected by the compiler.
Reviewed by: bdrewery, dim
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16574
This actually makes the rights requirements for accessing PCI config
space and BARs using /dev/pci same. Since unchanged /dev/pci mode
only allows write open for root, default configuration de-facto limits
the BAR read to root only. In particular, state-changing reads of the
registers are limited to root.
Discussed with: se
Suggested and reviewed by: jhb (kernel part)
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
Differential revision: https://reviews.freebsd.org/D16580
The code that iterates a list of interrupt handlers for a (shared)
interrupt, whether in the ISR context or in the context of an interrupt
thread, does so in a lock-free fashion. Thus, the routines that modify
the list need to take special steps to ensure that the iterating code
has a consistent view of the list. Previously, those routines tried to
play nice only with the code running in the ithread context. The
iteration in the ISR context was left to a chance.
After commit r336635 atomic operations and memory fences are used to
ensure that ie_handlers list is always safe to navigate with respect to
inserting and removal of list elements.
There is still a question of when it is safe to actually free a removed
element.
The idea of this change is somewhat similar to the idea of the epoch
based reclamation. There are some simplifications comparing to the
general epoch based reclamation. All writers are serialized using a
mutex, so we do not need to worry about concurrent modifications. Also,
all read accesses from the open context are serialized too.
So, we can get away just two epochs / phases. When a thread removes an
element it switches the global phase from the current phase to the other
and then drains the previous phase. Only after the draining the removed
element gets actually freed. The code that iterates the list in the ISR
context takes a snapshot of the global phase and then increments the use
count of that phase before iterating the list. The use count (in the
same phase) is decremented after the iteration. This should ensure that
there should be no iteration over the removed element when its gets
freed.
This commit also simplifies the coordination with the interrupt thread
context. Now we always schedule the interrupt thread when removing one
of handlers for its interrupt. This makes the code both simpler and
safer as the interrupt thread masks the interrupt thus ensuring that
there is no interaction with the ISR context.
P.S. This change matters only for shared interrupts and I realize that
those are becoming a thing of the past (and quickly). I also understand
that the problem that I am trying to solve is extremely rare.
PR: 229106
Reviewed by: cem
Discussed with: Samy Al Bahra
MFC after: 5 weeks
Differential Revision: https://reviews.freebsd.org/D15905
If there are no block devices, there is no need to printout
error (ENOENT).
In case of netboot, our image path has no block device, no need to make
noise about it.
Previously, this check was omitted for the first frame pointer.
Reported by: pho
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16572
When doing a read from disk, ZFS creates 3 ZIO's: a zio_null(), the
logical zio_read(), and then a physical zio. Currently, each of these
results in a separate taskq_dispatch(zio_execute).
On high-read-iops workloads, this causes a significant performance
impact. By processing all 3 ZIO's in a single taskq entry, we reduce the
overhead on taskq locking and context switching. We accomplish this by
allowing zio_done() to return a "next zio to execute" to zio_execute().
This results in a ~12% performance increase for random reads, from
96,000 iops to 108,000 iops (with recordsize=8k, on SSD's).
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-59292
Closes#7736zfsonlinux/zfs@62840030a7
9580 Add a hash-table on top of nvlist to speed-up operations
illumos/illumos-gate@2ec7644aab
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
Enable the LOCAL_PEERCRED socket option for unix domain stream sockets
created with socketpair(2). Previously, it only worked with unix domain
stream sockets created with socket(2)/listen(2)/connect(2)/accept(2).
PR: 176419
Reported by: Nicholas Wilson <nicholas@nicholaswilson.me.uk>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16350
illumos/illumos-gate@843c2111b1
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@843c2111b1
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@48dd5e630c
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@48dd5e630c
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@9ca527c3d3
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@9ca527c3d3
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9465 ARC check for 'anon_size > arc_c/2' can stall the system
illumos/illumos-gate@abe1fd01ce
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Don Brady <don.brady@delphix.com>
The zfs_dbuf_evict_key TSD (thread-specific data) is not necessary - we can
instead pass a flag down in a few places to prevent recursive dbuf eviction.
Making this change has 3 benefits:
1. The code semantics are easier to understand.
2. On Linux, performance is improved, because creating/removing TSD values
(by setting to NULL vs non-NULL) is expensive, and we do it very often.
3. According to Nexenta, the current semantics can cause a deadlock when
concurrently calling dmu_objset_evict_dbufs() (which is rare today, but they
are working on a "parallel unmount" change that triggers this more easily)
illumos/illumos-gate@c2919acbea
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
The zfs_dbuf_evict_key TSD (thread-specific data) is not necessary - we can
instead pass a flag down in a few places to prevent recursive dbuf eviction.
Making this change has 3 benefits:
1. The code semantics are easier to understand.
2. On Linux, performance is improved, because creating/removing TSD values
(by setting to NULL vs non-NULL) is expensive, and we do it very often.
3. According to Nexenta, the current semantics can cause a deadlock when
concurrently calling dmu_objset_evict_dbufs() (which is rare today, but they
are working on a "parallel unmount" change that triggers this more easily)
illumos/illumos-gate@c2919acbea
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
indirect vdevs that have been historically expanded
illumos/illumos-gate@11f6a9680e
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
illumos/illumos-gate@99a19144e8
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@99a19144e8
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
I inadvertently broke 'wc -L' in r326736. We must skip the fast path if -L
was specified, in addition to the existing check for the -l option.
Document long-standing -L behavior (count varies depending on whether wc(1)
is run with the -m option or not) in wc.1. That behavior dates back to the
introduction of the -L option, but was not documented.
PR: 230300
Reported by: <amstrnad+bugzilla AT gmail.com>
Sponsored by: Dell EMC Isilon
9438 Holes can lose birth time info if a block has a mix of birth times
Ultimately, the problem here is that when you truncate and write a file in
the same transaction group, the dbuf for the indirect block will be zeroed
out to deal with the truncation, and then written for the write. During
this process, we will lose hole birth time information for any holes in the
range. In the case where a dnode is being freed, we need to determine
whether the block should be converted to a higher-level hole in the zio
pipeline, and if so do it when the dnode is being synced out.
illumos/illumos-gate@738e2a3ce3
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
Ultimately, the problem here is that when you truncate and write a file in
the same transaction group, the dbuf for the indirect block will be zeroed
out to deal with the truncation, and then written for the write. During
this process, we will lose hole birth time information for any holes in the
range. In the case where a dnode is being freed, we need to determine
whether the block should be converted to a higher-level hole in the zio
pipeline, and if so do it when the dnode is being synced out.
illumos/illumos-gate@738e2a3ce3
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@0dd498c002
Reviewed by: C Fraire <cfraire@me.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Yuri Pankov <yuripv@yuripv.net>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Toomas Soome <tsoome@me.com>
