These bits are used for Intel CET IBT/Shadow Stack.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20516
If a device has only 1 MSI-X interrupt available and does not support either
MSI or legacy interrupts, iflib_device_register() will fail, leak memory and
MSI resources, and the driver will not load. Worse, if another iflib-using
driver tries to unload afterwards, a kernel panic will occur because the
previous failed iflib driver loead did not properly call "taskqgroup_detach()"
during it's cleanup.
This patch is band-aid for this situation -- don't try allocating MSI or legacy
interrupts if a single MSI-X interrupt was allocated, but fail to load instead.
As well, during the cleanup, properly call taskqgroup_detach() on the admin
task to prevent panics when other iflib drivers unload.
This whole interrupt allocation process actually needs re-doing to properly
support devices with only a single MSI-X interrupt, devices that only support
MSI-X, non-PCI devices, and multiple non-MSIX interrupts, as well.
Signed-off-by: Eric Joyner <erj@freebsd.org>
Reviewed by: marius@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D20747
HOSTNAME parameter or a parameter with an illegal length, only
include an error cause indicating why the ABORT was sent.
This also fixes an mbuf leak which could occur.
MFC after: 3 days
Commit message from Jake:
In iflib_register, the context is initialized as a kobject using the
device driver's "driver" kobject class. As part of this, the function
mistakenly increments the ref counter.
The ref counter is incremented twice, once in the code directly, and
once again by kobj_class_compile. However, there is no associated
decrement in the detach path. Because of this, the ref counter will
never go back down to zero, and thus the kobject method table will never
be released.
Remove this unnecessary reference count increment.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: jhb@, erj@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21125
For quite some time kgdb has been internally handling FreeBSD kernel
module state; add-on scripts and tools are not needed. asf(8) served
a similar purpose to this script and was removed in r335222.
PR: 229046
Reported by: jhb
Sponsored by: The FreeBSD Foundation
We may install llvm-objdump as objdump (see review D18307) or just
provide no /usr/bin/objdump, but either way GNU objdump won't be
installed in the future.
MFC after: 3 days
- Provide unionfs_add_writecount() which passes the writecount to the
lower or upper vnode as appropriate.
- In unionfs VOP_RECLAIM() implementation, annulate unionfs
writecounts from upper or lower vnode. It is not clear that it is
always correct to remove the all references from either lower or
upper vnode, but we currently do not track which vnode get how many
refs anyway.
Reported and tested by: t_uemura@macome.co.jp
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
r335217 added a deprecation notice to the source file for the objdump
man page, and r335219 added it to the rendered objdump.1, but in the
wrong spot.
MFC after: 3 days
The check for P_SINGLE_EXIT was shadowed by the (P_SHOULDSTOP || traced) check.
Reported by: bdrewery (might be)
Reviewed by: markj
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21124
an updated rack depend on having access to the new
ratelimit api in this commit.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D20953
In a git world this provides a facsimile of a monotonically increasing
version number. This might be refined further, but this provides a
starting point for investigation.
Reviewed by: cem
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20462
The magic number is a 32-bit quantity; use uint32_t to match hton's
return type and avoid sending zeros (upper 32 bits) on big-endian
architectures.
PR: 184141
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
with an eventual goal to convert all legacl zlib callers to the new zlib
version:
* Move generic zlib shims that are not specific to zlib 1.0.4 to
sys/dev/zlib.
* Connect new zlib (1.2.11) to the zlib kernel module, currently built
with Z_SOLO.
* Prefix the legacy zlib (1.0.4) with 'zlib104_' namespace.
* Convert sys/opencrypto/cryptodeflate.c to use new zlib.
* Remove bundled zlib 1.2.3 from ZFS and adapt it to new zlib and make
it depend on the zlib module.
* Fix Z_SOLO build of new zlib.
PR: 229763
Submitted by: Yoshihiro Ota <ota j email ne jp>
Reviewed by: markm (sys/dev/zlib/zlib_kmod.c)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19706
Only clear an EEH freeze if an error occurs. However, if an OPAL_HARDWARE
error is returned, this indicates a hardware failure which cannot be
unfrozen, and instead needs a hardware reset. Attempting to unfreeze a
broken PCH will result in console spam for each attempt. To avoid the spam,
just don't do it.
Summary:
Although it's convenient to reuse the pvo_plist for deletion, RB_TREE
insertion and removal is not free, and can result in a lot of extra work
to rebalance the tree. Instead, use a SLIST as a LIFO delete queue,
which gives us almost free insertion, deletion, and traversal.
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D21061
Bhyve's vmm is a self-contained modern component and thus a good
candidate for use of C99 types.
Reviewed by: jhb, kib, markj, Patrick Mooney
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21036
disk blocks, set the FORCE flag in the call to chkiq() or chkdq() since
the user is always allowed to return resources and hence there is no need
to check the user's credential .
Reported by: Christopher Krah, Thomas Barabosch, and Jan-Niclas Hilgert of Fraunhofer FKIE
Reported as: FS-1-UFS-1: Denial Of Service in mount (prison_priv_check)
Discussed with: kib
MFC: 1 week
Sponsored by: Netflix
Guest PPC OSs running under a hypervisor may communicate the features they
support, in order for the hypervisor to expose a virtualized machine in the way
the client (guest OS) expects (see LoPAPR 1.1 - B.6.2.3).
This is done by calling the "/ibm,client-architecture-support" (CAS) method,
informing supported features in option vectors. Until now, FreeBSD wasn't
using CAS, but instead relied on hypervisor/QEMU's defaults.
The problem is that, without CAS, it is very inconvenient to run POWER9 VMs on
a POWER9 host running with radix enabled. This happens because, in this case,
the QEMU default is to present the guest OS a dual MMU (HPT/RPT), instead of
presenting a regular HPT MMU, as FreeBSD expects, resulting in an early panic.
The known workarounds required either changing the host to disable radix or
passing a flag to QEMU to run in a POWER8 compatible mode.
With CAS, FreeBSD is now able to communicate that it wants an HPT MMU,
independent of the host setup, which now makes FreeBSD work on POWER9/pseries,
with KVM enabled and without hugepages (support added in a previous commit).
As CAS is invoked through OpenFirmware's call-method interface, it needs to be
performed early, when OpenFirmware is still operational. Besides, now that FDT
is the default way to inspect the device tree on PPC, OFW call-method feature
will be unavailable by default, when control is passed to the kernel. Because
of this, the call to CAS is being performed at the loader, instead of at the
kernel.
To avoid regressions with old platforms, this change uses CAS only on
POWER8/POWER9.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20827
This effectively makes the stack base on the csu _start entry
randomized.
The gap is enabled if ASLR is for the ABI is enabled, and then
kern.elf{64,32}.aslr.stack_gap specify the max percentage of the
initial stack size that can be wasted for gap. Setting it to zero
disables the gap, and max is capped at 50%.
Only amd64 for now.
Reviewed by: cem, markj
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21081
In some corner cases of static linking and unexpected libraries order
on the linker command line, libc symbol might preempt the same libthr
symbol, in which case libthr jump table points back to libc causing
either infinite recursion or loop. Handle all of such symbols by
using private libthr names for them, ensuring that the right pointers
are installed into the table.
In collaboration with: arichardson
PR: 239475
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21088
In some corner cases of static linking and unexpected libraries order
on the linker command line, libc symbol might preempt the same libthr
symbol, in which case libthr jump table points back to libc causing
either infinite recursion or loop. Handle all of such symbols by
using private libthr names for them, ensuring that the right pointers
are installed into the table.
In collaboration with: arichardson
PR: 239475
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21088
In particular, restart should be only done when the failure is
transient. For this, recheck the count1 value after the operation.
Note that do_sem_wait() is older usem interface.
Reported and tested by: bdrewery
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This adds several previously missed but important subcommands to list
namespaces and controllers. It also fixes few previously added but
just found with real testing to be broken subcommands.
Also while there, add possibility to explicitly specify nsid for
`nvmecontrol identify` subcommand. It may be useful to specify nsids
not having own devices, for example 0xffffffff, or just newly created
ones.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
This allows to simulated disk that is responding slowly to the IO requests.
Reviewed by: markj, bcr, pjd (previous version)
Differential Revision: https://reviews.freebsd.org/D21052
Avoid potential structure padding leak. r350294 identified a leak via
static analysis; although there's no report of a leak with the
DIOCGETSRCNODES ioctl it's a good practice to zero the memory.
Suggested by: kp
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This is a backport of LLVM commit 8331f61a51a7a0a1efbf5ed398e181593023d151,
llvm-svn: 353981:
ELF: Allow GOT relocs pointing to non-preemptable ifunc to resolve to an
IRELATIVE where possible.
This is needed in order to make ifuncs work correctly on PPC64.
It fixes an issue with lld, in which it would skip emitting necessary IRELATIVE
relocations. Without this change, indirect calls to ifuncs would result in a
segmentation fault, in static binaries or when defined in the main binary
(outside shared libraries).
This change also reverts the local
"Preserve relocations against ifuncs when -zifunc-noplt" commit and
replaces it by its upstream version, as part of the merge.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D21102
The motivation for this change is to allow wrappers around shm to be written
that don't set CLOEXEC. kern_shm_open currently accepts O_CLOEXEC but sets
it unconditionally. kern_shm_open is used by the shm_open(2) syscall, which
is mandated by POSIX to set CLOEXEC, and CloudABI's sys_fd_create1().
Presumably O_CLOEXEC is intended in the latter caller, but it's unclear from
the context.
sys_shm_open() now unconditionally sets O_CLOEXEC to meet POSIX
requirements, and a comment has been dropped in to kern_fd_open() to explain
the situation and add a pointer to where O_CLOEXEC setting is maintained for
shm_open(2) correctness. CloudABI's sys_fd_create1() also unconditionally
sets O_CLOEXEC to match previous behavior.
This also has the side-effect of making flags correctly reflect the
O_CLOEXEC status on this fd for the rest of kern_shm_open(), but a
glance-over leads me to believe that it didn't really matter.
Reviewed by: kib, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21119
mapping and then destroy one of the 4 KB page mappings so that there is a
potential trigger for repromotion. Currently, we destroy the first 4 KB
page mapping that falls within the (current) superpage mapping or the
virtual address range [sva, eva). However, I have found empirically that
destroying the last 4 KB mapping produces slightly better results,
specifically, more promotions and fewer failed promotion attempts.
Accordingly, this revision changes pmap_advise() to destroy the last 4 KB
page mapping. It also replaces some nearby uses of boolean_t with bool.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D21115
While old devices may not support 10 byte MODE SENSE/MODE SELECT commands,
new ones may not be able to report all mode pages with 6 byte commands.
This patch makes camcontrol by default start with 10 byte commands and
fall back to 6 byte on ILLEGAL REQUEST error, or 6 byte can be forced.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Some warning flags are valid for C++ but not C. GCC 8 complains if you pass
such flags when building a C file. Using a separate variable for these
flags allows building both C and C++ files in the same directory (such as
the fusefs tests) under GCC.
Reviewed by: cem, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21116
It is assembled using "${CC} -x assembler-with-cpp", which by convention
(bsd.suffixes.mk) uses the .asm extension.
This is a portion of the review referenced below (D18344). That review
also renamed linux_support.s to .S, but that is a functional change
(using the compiler's integrated assembler instead of as) and will be
revisited separately.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18344
witness has long had a facility to "bless" designated lock pairs. Lock
order reversals between a pair of blessed locks are not reported upon.
We have a number of long-standing false positive LOR reports; start
marking well-understood LORs as blessed.
This change hides reports about UFS vnode locks and the UFS dirhash
lock, and UFS vnode locks and buffer locks, since those are the two that
I observe most often. In the long term it would be preferable to be
able to limit blessings to a specific site where a lock is acquired,
and/or extend witness to understand why some lock order reversals are
valid (for example, if code paths with conflicting lock orders are
serialized by a third lock), but in the meantime the false positives
frequently confuse users and generate bug reports.
Reviewed by: cem, kib, mckusick
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21039
