These tools declare global variables without using the static keyword,
even though their use is limited to a single C-file, or without placing
an extern declaration of them in the proper header file.
madvise(2) except that it operates on a file descriptor instead of a
memory region. It is currently only supported on regular files.
Just as with madvise(2), the advice given to posix_fadvise(2) can be
divided into two types. The first type provide hints about data access
patterns and are used in the file read and write routines to modify the
I/O flags passed down to VOP_READ() and VOP_WRITE(). These modes are
thus filesystem independent. Note that to ease implementation (and
since this API is only advisory anyway), only a single non-normal
range is allowed per file descriptor.
The second type of hints are used to hint to the OS that data will or
will not be used. These hints are implemented via a new VOP_ADVISE().
A default implementation is provided which does nothing for the WILLNEED
request and attempts to move any clean pages to the cache page queue for
the DONTNEED request. This latter case required two other changes.
First, a new V_CLEANONLY flag was added to vinvalbuf(). This requests
vinvalbuf() to only flush clean buffers for the vnode from the buffer
cache and to not remove any backing pages from the vnode. This is
used to ensure clean pages are not wired into the buffer cache before
attempting to move them to the cache page queue. The second change adds
a new vm_object_page_cache() method. This method is somewhat similar to
vm_object_page_remove() except that instead of freeing each page in the
specified range, it attempts to move clean pages to the cache queue if
possible.
To preserve the ABI of struct file, the f_cdevpriv pointer is now reused
in a union to point to the currently active advice region if one is
present for regular files.
Reviewed by: jilles, kib, arch@
Approved by: re (kib)
MFC after: 1 month
file descriptor drops to zero out of _fdrop() and into devfs_close_f()
as it is only relevant for devfs file descriptors.
Reviewed by: kib
MFC after: 1 week
subject heading "mtx_lock() of destroyed mutex on NFS" and
PR# 156168 appear to be caused by clnt_dg_destroy() closing
down the socket prematurely. When to close down the socket
is controlled by a reference count (cs_refs), but clnt_dg_create()
checks for sb_upcall being non-NULL to decide if a new socket
is needed. I believe the crashes were caused by the following race:
clnt_dg_destroy() finds cs_refs == 0 and decides to delete socket
clnt_dg_destroy() then loses race with clnt_dg_create() for
acquisition of the SOCKBUF_LOCK()
clnt_dg_create() finds sb_upcall != NULL and increments cs_refs to 1
clnt_dg_destroy() then acquires SOCKBUF_LOCK(), sets sb_upcall to
NULL and destroys socket
This patch fixes the above race by changing clnt_dg_destroy() so
that it acquires SOCKBUF_LOCK() before testing cs_refs.
Tested by: bz
PR: 156168
Reviewed by: dfr
MFC after: 2 weeks
UP/!SMP case.
The callbacks may be relying on this feature and having 2 different
ways to deal with them is not correct.
Reported by: rstone
Reviewed by: jhb
MFC after: 2 weeks
They seem to be changed unintentionally in r226437, and there were no
any mentions of renaming in commit log message.
Reported by: Anton Yuzhaninov <citrin citrin ru>
the word alignment, some versions of gcc do require 16-byte alignment.
Make sure the stack is 16-byte aligned before calling a subroutine.
Inspired by: PR amd64/162214
MFC after: 1 week
as it is required by amd64 ABI. Add a comment for the places were
the stack is accidentally properly aligned already.
PR: amd64/162214
Submitted by: yamayan <yamayan kbh biglobe ne jp>
MFC after: 1 week
- delay consumer closing and detaching on orphan() until all I/Os complete;
- prevent new I/Os submission after orphan() called.
Previous implementation could destroy consumers still having active
requests and worked only because of global workaround made on GEOM level.
pwd_mkdb, etc. updates at the end of the comparison.
2. Add an update to the end to handle /etc/localtime, if it exists.
If /var/db/zoneinfo exists, automatically update /etc/localtime,
which should (hopefully) be safe to do. If not, prompt the user
to run tzsetup.
3. Update run_it_now(), the function that handles input for the updates,
to make sure that we got a valid answer, and to handle the --run-updates
option if supplied.
and use these new options in the mips pmap.
Wake up the page daemon in vm_page_alloc_freelist() if the number of free
and cached pages becomes too low.
Tidy up vm_page_alloc_init(). In particular, add a comment about an
important restriction on its use.
Tested by: jchandra@
instead of destroy_dev(). It moves device destruction waiting out of the
topology lock and so fixes dead lock between orphanization and closing.
Real provider and geom destruction called from swi context after device
destroyed as callback of the destroy_dev_sched_cb().
replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel
configuration files. Besides duplicating functionality, amd(4), which
previously also supported the AMD Am53C974, unlike esp(4) is no longer
maintained and has accumulated enough bit rot over time to always cause
a panic during boot as long as at least one target is attached to it
(see PR 124667).
PR: 124667
Obtained from: NetBSD (based on)
MFC after: 3 days
Do not close/destroy opened consumer directly in case of disconnect. Instead
keep it existing until it will be closed in regular way in response to
upstream provider destruction. Delay geom destruction in the same way.
Previous implementation could destroy consumers still having active
requests and worked only because of global workaround made on GEOM level.
corresponding Linux driver uses. This allows mpt(4) to still recognize
all good SATA devices in presence of a defective one, which takes about
45 seconds.
In the long term we probably should implement the logic used by mpt2sas(4)
allowing IOC port initialization to complete at a later time.
Submitted by: Andrew Boyer
MFC after: 3 days
by rman_get_virtual(9) to access device registers sparc64 currently cares
about.
Ideally ata(4) should just be converted to access these using bus_space(9)
read/write functions instead as there's really no reason to do it the
former way. However, this part of ata-siliconimage.c should go away in
favor of siis(4) sooner or later anyway and I don't have the hardware to
actually test the SX4 bits of ata-promise.c.
Also ideally the other architectures should also properly handle the
BUS_SPACE_MAP_LINEAR flag of bus_space_map(9) so this code wouldn't need
to be #ifdef'ed.
Do not close/destroy opened consumer directly in case of disconnect. Instead
keep it existing until it will be closed in regular way in response to
upstream provider destruction. Delay geom destruction in the same way.
Previous implementation could destroy consumers still having active
requests and worked only because of global workaround made on GEOM level.
take advantage of it instead of duplicating it. This reduces the size of
the i386 GENERIC kernel by about 4k. The only potential in-tree user left
unconverted is xe(4), which generally should be changed to use miibus(4)
instead of implementing PHY handling on its own, as otherwise it makes not
much sense to add a dependency on miibus(4)/mii_bitbang(4) to xe(4) just
for the MII bitbang'ing code. The common MII bitbang'ing code also is
useful in the embedded space for using GPIO pins to implement MII access.
- Based on lessons learnt with dc(4) (see r185750), add bus barriers to the
MII bitbang read and write functions of the other drivers converted in
order to ensure the intended ordering. Given that register access via an
index register as well as register bank/window switching is subject to the
same problem, also add bus barriers to the respective functions of smc(4),
tl(4) and xl(4).
- Sprinkle some const.
Thanks to the following testers:
Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4))
Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4).
Reviewed by: yongari (subset of drivers)
Obtained from: NetBSD (partially)
r162200 delays provider orphanization until all running requests complete,
to workaround broken orphan() method implementation in some classes.
r215687 removes persistent periodic (10Hz) event thread wake ups.
Together these changes can indefinitely delay orphanization until some
other event wake up the event thread. One consequence of this is inability
of CAM to destroy device disconnected when busy and, as consequence, create
new one after reconnection.
While the best solution would be to revert r162200, it is not easy, as
some classes still look broken in that way. Instead conditionally wake up
event thread if there are some providers waiting for orphanization.
MFC after: 1 week
- Fiji will end DST on 22 January 2012.
- Moldova split into two timezones has been cancelled.
- Cuba will end DST on 13 November 2011
Obtained from: ftp://ftp.iana.org/tz/releases/
- Fiji will end DST on 22 January 2012.
- Moldova split into two timezones has been cancelled.
- Cuba will end DST on 13 November 2011
Obtained from: ftp://ftp.iana.org/tz/releases/
For these simple utilities, it doesn't harm to make all global variables
static. In fact, this allows the compiler to perform better forms of
optimisation and analysis.
-march=native" on AMD K10 family processors no longer errors out with
"unknown target CPU 'amdfam10'". This also enables use of SSE4A.
Reported by: David Marec <david.marec@davenulle.org>
MFC after: 3 days
- Move esp_devclass to ncr53c9x.c in order to allow different bus front-ends
to use it.
- Use KOBJMETHOD_END.
- Remove the gl_clear_latched_intr hook as it's not needed for any of the
chips nor the front-ends supported in FreeBSD and likely never will be.
- Correct the DMA constraints used in the SBus front-end, the LSI64854 isn't
limited to 32-bit DMA.
- The ESP200 also only supports up to 64k transfers.
- Don't let the DMA and SBus front-end supply a maximum transfer size larger
than MAXPHYS as that's the maximum the upper layers use and we otherwise
just waste resources unnecessarily.
- Initialize the ECB callout and don't zero the handle when returning ECBs
to the free list so that ncr53c9x_callout() actually is called with the
driver lock held.
- On detach the driver lock should be held across cam_sim_free() according
to isp(4) and a panic received.
- Check the return value of NCRDMA_SETUP(), i.e. bus_dmamap_load(9), and try
to handle failures gracefully.
- In ncr53c9x_action() replace N calls to xpt_done() in a switch with just
one at the end.
- On XPT_PATH_INQ report "NCR" rather than "Sun" as the vendor as the former
is somewhat more correct as well as the maximum supported transfer size via
maxio in order to take advantage of controllers that that can handle more
than DFLTPHYS.
- Print the number of MESSAGE (EXTENDED) rejected.
- Fix the path encoded in the multiple inclusion protection of ncr53c9xvar.h.
- Correct the DMA constraints used in the LSI64854 core to not exceed the
maximum supported transfer size and include the boundary so we don't need
to check on every setup of a DMA transfer.
- Let the bus DMA map callbacks do nothing in case of an error.
- Correctly handle > 64k transfers for FAS366 in the LSI64854. A new feature
flag NCR_F_LARGEXFER was introduced so we just need to check for this one
and not for individual controllers supporting large transfers in several
places.
- Let the LSI64854 core load transfer buffers using BUS_DMA_NOWAIT as the
NCR53C9x core can't handle EINPROGRESS. Due to lack of bounce buffers
support, sparc64 doesn't actually use EINPROGRESS and likely never will,
as an example for writing additional front-ends for the NCR53C9x core it
makes sense to set BUS_DMA_NOWAIT anyway though.
- Some minor cleanup.
are linked with libraries they don't use:
- zinject doesn't use libavl
- ztest doesn't use libz
- zdb uses neither libavl nor libz
- zfs uses neither libbsdxml nor libm, nor libsbuf
- zpool uses neither libbsdxml nor libm, nor libsbuf
In addition, libzfs needs libm because it uses pow(), however it isn't
linked with -lm. This went unnoticed because all its users had -lm before.
Reviewed by: pjd, mm
Approved by: kib (mentor)
MFC after: 1 week
