- Always unlink $cmd after exit via END block.
- The tests don't function well if kern.geom.debugflags != 0. Save debugflags,
then restore them at the end of the test.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
This will allow the tool to be used with arbitrary geom(4) classes, like GEOM.
Specify class=PART explicitly in the tester to keep existing behavior.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Before this test just checked scenario of setting and removing the accept
filter at different states of the socket. Now it also checks that accept
filter works: we connect to the server, and then check that we can't accept,
then we send 1 byte of data and check again.
If the commands had failed previously, it would press on and result in a
series of cascading failures. Fail early and continue on to the next case
instead of executing additional commands after a previously failed series
of steps.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
- Make the logfile for $out be built off the basename for $cmd, instead of $cmd.
(r317292 broke this assumption).
- Rename $mntpt to $mntpt_prefix for clarity, as this variable is a prefix for
mountpoints.
- Reindent the umount directive block while here to match the rest of the code.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
The `remove` verb hasn't been present in geom_part*(4) for well
over a decade, if ever. I couldn't find any references to it in
^/stable/5 at least, which is around the timeframe that this test
was written.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
- Declare $count with the `my` scope operator to permit `use strict`.
- Add `use strict`.
- Use `use warnings` instead of using `-w` in the shebang.
- Don't unlink $cmd when done (prevents unnecessary rebuilding).
- Improve the error message when running with insufficient permissions, e.g.,
non-root.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
This is being done to reduce ambiguity and to make the tests more portable
in the future to other locations in the source tree.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
sources to return timestamps when SO_TIMESTAMP is enabled. Two additional
clock sources are:
o nanosecond resolution realtime clock (equivalent of CLOCK_REALTIME);
o nanosecond resolution monotonic clock (equivalent of CLOCK_MONOTONIC).
In addition to this, this option provides unified interface to get bintime
(equivalent of using SO_BINTIME), except it also supported with IPv6 where
SO_BINTIME has never been supported. The long term plan is to depreciate
SO_BINTIME and move everything to using SO_TS_CLOCK.
Idea for this enhancement has been briefly discussed on the Net session
during dev summit in Ottawa last June and the general input was positive.
This change is believed to benefit network benchmarks/profiling as well
as other scenarios where precise time of arrival measurement is necessary.
There are two regression test cases as part of this commit: one extends unix
domain test code (unix_cmsg) to test new SCM_XXX types and another one
implementis totally new test case which exchanges UDP packets between two
processes using both conventional methods (i.e. calling clock_gettime(2)
before recv(2) and after send(2)), as well as using setsockopt()+recv() in
receive path. The resulting delays are checked for sanity for all supported
clock types.
Reviewed by: adrian, gnn
Differential Revision: https://reviews.freebsd.org/D9171
away in the past from the current time. This should be plenty for the
scheduler to do its job. It provides assurance that the timestamp
returned is actually a valid one, not just some random garbage.
used. We can do it programmatically, but that would make code convoluted
and more complex. I have two more of those types coming for the CLOCK_REALTIME
and CLOCK_MONOTONIC. This seems like an elegant and scallable approach.
file into smaller pieces that are hopefully easier to understand
and extend. This is to pave the ground for adding few more
socket timestamp formats that I am working on here.
No functional changes (I hope).
They were not very useful in their current state. It only ran a fork bomb,
confirmed headers/footers matched, hard-coded the number of expected entries
(rather than ensuring each entry is present when expected), and was missing a
sizeof_long.c file from r251368 which makes its intent for testing 32-bit
binaries unclear.
More extensive tests should be written with ATF now.
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste
Partially reviewed by: drysdale@google.com, bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
Although POSIX literally permits failing with [EINVAL] if IPC_CREAT and
IPC_EXCL were both passed, the semaphore set already exists and has fewer
semaphores than nsems, this does not allow an application to retry safely:
if the [EINVAL] is actually because of the semmsl limit, an infinite loop
would result.
PR: 206927
the second set (increment the original ports by 10)
This avoids issues where the first listening socket might not be torn
down by the time it makes it to the second set of testcases.
The sockets should likely only be setup once, but this keeps in the
spirit of the original testcases, so this will be easier to backport
to ^/stable/9
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
It always fails when trying to send through the sendit(9) private KPI in the
kernel due to a size mismatch between the msghdr and data being sent [*], which
suspiciously seems like it's related to sizeof pointers instead of scalars, or
something of that ilk
MFC after: 1 week
PR: 206543, 206544 [*]
Sponsored by: EMC / Isilon Storage Division
check_scm_creds_sockcred after initial != NULL checks have been done for
debugging purposes
- Use more terse names for bintime (bt), cmesgcred (cmcred),
sockcred (sc), and timeval (tv) [*]
- Add some debug messages to better understand some of the flow of the test
program
MFC after: 1 week
Requested by: bde [*]
Use of the word "terse" (^.^) corrected by: jhb, rpokala [*]
Sponsored by: EMC / Isilon Storage Division
This bug could be reproduced easily by calling sem_open() with O_CREAT |
O_EXCL on a semaphore that is already open in the process. The struct
sem_nameinfo would be freed while still in sem_list and later calls to
sem_open() or sem_close() could access freed memory.
PR: 206396
MFC after: 5 days
- Get rid of unused argc/argv variables in main
- Exit on failure with a return code of 1 instead of -1 with err/errx as a
return code of -1 is implementation dependent
- Bump WARNS to 6
MFC after: 5 days
Sponsored by: EMC / Isilon Storage Division
reconnect.c:
- Convert the K&R prototype of main to an ANSI prototype to mute a
warning from gcc 4.2.1
- Close s_sock2 after finishing off the last test to plug a leak and
mute a warning from gcc 5.0 about a -Wunused-but-set variable
sendfile.c:
- Fix a -Wunused-but-set warning with gcc 5.0 with pagesize in main(..)
MFC after: 5 days
Sponsored by: EMC / Isilon Storage Division
- `SOCK_RAW` is the implied supported type parameter for socket(2) per route(4)
- localsw in `sys/kern/uipc_usrreq.c` doesn't have an entry for `SOCK_RAW`, so
the prototype is invalid (this isn't explicitly documented anywhere I could
find)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will help ensure that scripts/parsers don't get confused when the message
is printed out
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
tools/regression/geom_{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
in to the FreeBSD test suite as
tests/sys/geom/class/{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
The tools/regression/geom and tools/regression/geom_part testcases are being
left alone because both test sets are both currently broken.
The majority of this work was done on ^/user/ngie/more-tests2 . The differences
are as follows:
- tests/sys/geom/class/Makefile.inc is not present; it was
inlined into the class's Makefiles for explicitness.
- The testcases officially require root via kyua
- The geom_gate(4) tests don't use the pidfile changes proposed in
https://reviews.freebsd.org/D4836 .
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
- Add a conf.sh file for executing common functions with geom_gate
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
- Add/increase sleeps to try and improve synchronization
- Add debug output for when checksums fail
test-1.t:
- Use pkill for killing ggated
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
(geom_test_cleanup, etc) down so the testcases don't emit noise when
bailing
- Conform to the TAP protocol better when dealing with classes that can't
be loaded and with temporary files that can't be allocated for tracking
md(4) devices.
MFC after: 2 weeks
X-MFC with: r293028, r293029, r293048
Sponsored by: EMC / Isilon Storage Division
- Delete test-2.sh as it was an incomplete testcase, and the contents were
basically a subset of test-1.sh
- Add a conf.sh file for executing common functions with geom_uzip
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
exit so things are cleaned up properly
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
exit so things are cleaned up properly
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
