/lib/{libm,libreadline}
/usr/lib/{libhistory,libopie,libpcap}
in preparation for doing the same thing to RELENG_5. HUGE amounts of
help for determining what to bump provided by kris.
Discussed on: freebsd-current
Approved by: re (not required for commit but something like this should be)
the signal mask and pending signals of the calling thread. These
are stored in userland in libpthread.
There is a small race condition in this patch which could cause
problems if a signal arrives after setting the (kernel) signal
mask and before exec'ing. The thread's set of pending signals
also are not yet installed in the exec'd process. Both of these
will be corrected with the addition of a special syscall.
Reported & Tested by: Joost Bekkers <joost at jodocus dot org>
Reviewed by: julian, davidxu
1. Install man files and links for the lwres library.
2. Fix the path in various files to say /etc/namedb/ instead of just /etc.
3. Correctly install the conf file man pages for named and rndc.
to match how similar syntax is used in the ports system. Thanks to kris
for pointing out my mistake here.
Install the lwres library unless the user defines NO_BIND, or the new
knob, NO_BIND_LIBS_LWRES. There is at least one potential customer
for this library in the wings. Thanks to nectar for the reminder.
but have a knob (WANT_BIND_LIBS) to build and install them in /usr/lib
and /usr/include. Rumors are that this may be useful at a later point,
let's see.
What this really means is that all BIND libraries are now internal to
buildworld (by default, unless WANT_BIND_LIBS is defined), and linked
statically into various BIND executables.
While here, removed redundant -I's from CFLAGS in lib/bind makefiles.
Sponsored by: des
OK'ed by: dougb
__isnan() and __isnanf() must remain in libc for hysterical raisins.
On the other hand, __isnanl() must live in libm because libm uses it
internally and can't depend on older versions of libc to provide it.
Fortunately, we don't need __isnanl() in both libraries.
Prodded by: ale
PR: 71698
MT5 candidate
specified mutex is invalid. In spec parlance 'MAY FAIL' means it's
up to the implementor. So, remove the check for NULL pointers for two
reasons:
1. A mutex may be invalid without necessarily being NULL.
2. If the pointer to the mutex is NULL core-dumping in the
vicinity of the problem is much much much better than failing
in some other part of the code (especially when the application
doesn't check the return value of the function that you oh so
helpfully set to EINVAL).
full KSE support still have -lpthread as an alias for -lc_r. The only
thing that's different is the name of the knob that turns it off.
Pointed out by: ru@
POSIX threads libraries are not available. Add crypto support if
the crypto libraries are available. Build dnssec-{keygen,signzone}
if crypto is available.
Submitted by: (in part) dougb@
1. The correct cutoff for large uid/gid handling is 1<<18, not 1<<20.
2. Limit the uid/gid in the 'x' extension header (where numeric extensions
are not permitted) to 1<<18, but use the correct value in the regular
header (where numeric extensions are permitted).
Thanks to: Dan Nelson
MFC after: 3 days
caused by refering broken (uninitialized?) pointer which is retrieved
from __bt_new() (and from mpool_new()).
I don't know why this linp[0] is read before stored because this
should be controlled by .lower and .upper member of PAGE structure
which are correctly initialized.
But this workaround fixes the problem on my environment and this
module has #ifdef PURIFY option which initializes new and reused
memory from mpool by memset(p, 0xff, size) like as I did.
Please feel free to fix the real bug instead of my workaround.
transaction id from the request, this is useful for debugging.
Fix the autoh_freeall(3) function to properly free the array of
auto handles. Before it was freeing individual members of the list
OK, however it was then advancing the pointer and freeing the wrong
data for the whole list.
multibyte character support:
- In CHadd(), avoid writing past the end of the character set bitmap when
the opposite-case counterpart of wide characters with values less than
NC have values greater than or equal to NC.
- In CHaddtype(), fix a braino that caused alphabetic characters to be
added to all character classes! (but only with REG_ICASE)
PR: 71367
but with slightly cleaned up interfaces.
The KSE structure has become the same as the "per thread scheduler
private data" structure. In order to not make the diffs too great
one is #defined as the other at this time.
The KSE (or td_sched) structure is now allocated per thread and has no
allocation code of its own.
Concurrency for a KSEGRP is now kept track of via a simple pair of counters
rather than using KSE structures as tokens.
Since the KSE structure is different in each scheduler, kern_switch.c
is now included at the end of each scheduler. Nothing outside the
scheduler knows the contents of the KSE (aka td_sched) structure.
The fields in the ksegrp structure that are to do with the scheduler's
queueing mechanisms are now moved to the kg_sched structure.
(per ksegrp scheduler private data structure). In other words how the
scheduler queues and keeps track of threads is no-one's business except
the scheduler's. This should allow people to write experimental
schedulers with completely different internal structuring.
A scheduler call sched_set_concurrency(kg, N) has been added that
notifies teh scheduler that no more than N threads from that ksegrp
should be allowed to be on concurrently scheduled. This is also
used to enforce 'fainess' at this time so that a ksegrp with
10000 threads can not swamp a the run queue and force out a process
with 1 thread, since the current code will not set the concurrency above
NCPU, and both schedulers will not allow more than that many
onto the system run queue at a time. Each scheduler should eventualy develop
their own methods to do this now that they are effectively separated.
Rejig libthr's kernel interface to follow the same code paths as
linkse for scope system threads. This has slightly hurt libthr's performance
but I will work to recover as much of it as I can.
Thread exit code has been cleaned up greatly.
exit and exec code now transitions a process back to
'standard non-threaded mode' before taking the next step.
Reviewed by: scottl, peter
MFC after: 1 week
denote a directory. Unfortunately, in the presence of GNU or POSIX
extensions, this code was checking the truncated filename stored in the
regular header rather than the full filename stored in the extended
attribute. As a result, long filenames with '/' in just the right
position would trigger this check and be erroneously marked as
directories. Move the check so it only considers the full filename.
Note: the check can't simply be disabled for archives that contain
these extensions because there are some very broken archivers out
there.
Thanks to: Will Froning
MFC after: 3 days
since otherwise the initial seek offset will contain the directory
offset of the filesystem block that contained its directory entry.
This bug was mostly harmless because typically the directory is
less than one filesystem block in size so the offset would be zero.
It did however generally break loading a kernel from the (large)
kernel compile directory.
Also reset the seek pointer when a new inode is opened in read_inode(),
though this is not actually necessary now because all callers set
it afterwards.
By using r8 instead of r14 to do the swap, we put the dst argument
in the return register. Since bcopy() doesn't clobber r8, we don't
have to do anything else. This fixes ports/textproc/aspell.
documenting the obsoleteness of the msync(2) syscall and its single
remaining purpose.
PR: 70916
Submitted by: Radim Kolar <hsn@netmag.cz>
MFC after: 3 days
.h files. This simplifies the Makefile here a bit and makes it behave
better in a couple of situations. While I'm here, clean up some comments
and try to improve the organization a bit.
Thanks to: Ruslan Ermilov (The Marvelous Makefile Guru)
mpool_open(3) - it is *not* really used for synchronization; in fact,
it is not used at all.
PR: 70929
Submitted by: Martin Kammerhofer <dada@sbox.tugraz.at>
MFC after: 3 days
This should provide a big performance boost for folks using NIS or LDAP.
MFC after: 3 days
Thanks to: Jun Kuriyama (for reminding me that this was still on my TODO list)
This closes a security hole. Otherwise, libarchive will happily
extract into directories to which it lacks write permissions by
resetting the permissions during the extract.
Thanks to: Kris Kennaway
_mcount() stub when profiling is enabled. Emit this code sequence
for assembly routines as welli (MCOUNT definition in <machine/asm.h>.
We do not pass the GOT entry however as the 4th argument, because it's
not used. The _mcount() stub calls __mcount(), which does the actual
work. Define _MCOUNT_DECL to define __mcount. We do not have an
implementation of mcount(), so we define MCOUNT as empty, but have a
weak alias to _mcount() in _mcount.S.
Note that the _mcount() stub in the kernel is slightly different from
the stub in userland. This is because we do not have to worry about
nested routines in the kernel.
64 bit systems, years roughly -2^31 through 2^31 can be represented in
time_t without any trouble. 32 bit time_t systems only range from
roughly 1902 through 2038. As a consequence, none of the date munging
code for all the various calendar tweaks before then is present. There
are other problems including the fact that there was no 'year zero' and
so on. So rather than get excited about trying to figure out when the
calendar jumped by two weeks etc, simply disallow negative (ie: prior to
1900) years.
This happens to have an important side effect. If you bzero a 'struct
tm', it corresponds to 'Jan 0, 1900, 00:00 GMT'. This happens to be
representable (after canonification) in 64 bit time_t space. Zero tm
structs are generally an error and mktime normally returns -1 for them.
Interestingly, it tries to canonify the 'jan 0' to 'dec 31, 1899', ie:
year -1. This conveniently trips the negative year test above, which
means we can trivially detect the null 'tm' struct.
This actually tripped up code at work. :-/ (Don't ask)
GP register, because it's clobbered for calls across load modules. The
previous commit inserted the call to _init_tls() between the call to
atexit() and the restoration of the GP register clobbered by it. Fix:
restore GP before we call _init_tls().
Pointy hat: dfr@
19 column positions wide in the first line and 20 in the rest of the lines.
This fixes the example to provide the correct output.
PR: 53454
Noticed by: Kuang-che Wu <kcwu@kcwu.homeip.net>
Submitted by: Marc Silver <marcs@draenor.org>
Approved by: re (scottl)
simple errx() function.
Improve behavior when bzlib/zlib are missing by detecting and
issuing an error message on attempts to read gzip/bzip2 compressed
archives.
a knob to force process scope threads. If the environment variable
LIBPTHREAD_PROCESS_SCOPE is set, force all threads to be process
scope threads regardless of how the application creates them. If
LIBPTHREAD_SYSTEM_SCOPE is set (forcing system scope threads), it
overrides LIBPTHREAD_PROCESS_SCOPE.
$ # To force system scope threads
$ LIBPTHREAD_SYSTEM_SCOPE=anything threaded_app
$ # To force process scope threads
$ LIBPTHREAD_PROCESS_SCOPE=anything threaded_app
if it is true.
2.Add thread_db api td_thr_tls_get_addr to get tls address, the real code
is commented out util tls patch is committed.
Reviewed by: deischen
and close it) and "finish" (destroy the object) functions. For backwards
compat and simplicity, have "finish" invoke "close" transparently if needed.
This allows clients to close the archive and check end-of-operation
statistics before destroying the object.
LIBPTHREAD_SYSTEM_SCOPE in the environment.
You can still force libpthread to be built in strictly 1:1 by
adding -DSYSTEM_SCOPE_ONLY to CFLAGS. This is kept for archs
that don't yet support M:N mode.
Requested by: rwatson
Reviewed by: davidxu
is present for FreeBSD. If you "make distfile" on FreeBSD, you will
soon have a tar.gz file suitable for deploying to other systems
(complete with the expected "configure" script, etc). This latter
relies (at least for now) on the GNU auto??? tools. (I like autoconf
okay, but someday I hope to write a custom Makefile.in and dispense
with automake, which is somewhat odious.)
As part of this, I've cleaned up some of the conditional
compilation options, added make-foo to construct archive.h dynamically
(it now contains some version constants), and added some useful
informational files.
mode bits when setting permissions from ACL data.
Thanks to: David Gilbert for first reporting this and
Jimmy Olgeni for noticing that it only occurred on
ACL-enabled filesystems.
of releases. The -DNOCRYPT build option still exists for anyone who
really wants to build non-cryptographic binaries, but the "crypto"
release distribution is now part of "base", and anyone installing from a
release will get cryptographic binaries.
Approved by: re (scottl), markm
Discussed on: freebsd-current, in late April 2004
the chunk will never be added to the list in that case. Use type mbr
for GPT nested MBRs and use type part for any partition we don't know
or care about. Since the subtype is 0, this should not cause confusion.
libc. The externally-visible effect of this is to add __isnanl() to
libm, which means that libm.so.2 can once again link against libc.so.4
when LD_BIND_NOW is set. This was broken by the addition of fdiml(),
which calls __isnanl().
functions. Basically, the ip_next() function was used to get the PPTP and
Skinny headers when tcp_next() should have been used instead. Symptoms of
this included a segfault in natd when trying to process a PPTP or Skinny
packet.
Approved by: des
example. The externs haven't been needed in about 10 years, so
there's no reason to have them other than for hysterical raisins. And
the California Rasins haven't been around for a long time...
o In the rwlock code: move a duplicated check inside an if..else to after
the if...else clause.
o When initializing a static rwlock move the initialization check
inside the lock.
o In thr_setschedparam.c: When breaking out of the trylock...retry if busy
loop make sure to reset the mtx pointer to null if the mutex is nolonger
in a queue.
code on the existence of the relevant libraries (actually,
the existence of the include files).
This will allow the library to be easily ported to systems
that don't have these libraries. (Of course, it also means
that clients using the library on such systems will not be
able to take advantage of the automatic compression format
detection.)
to describe the 4.4BSD extension of accepting arguments outside the range
of unsigned char. This gives us freedom to remove this extension when we
remove the <rune.h> interface in FreeBSD 6.
These convert plain ASCII characters in-line, making them only slightly
slower than the single-byte ("NONE" encoding) version when processing
ASCII strings.
in the regular ustar header that are overridden by the pax
extended attributes. As a result, it makes perfect sense to
use numeric extensions in the regular ustar header so that readers
that don't understand pax extensions but do understand some other
extensions can still get useful information out of it.
This is especially important for filesizes, as the failure to
read a file size correctly can get the reader out of sync.
This commit introduces a "non-strict" option into the internal
function to format a ustar header. In non-strict mode, the formatter
will use longer octal values (overwriting terminators) or binary
("base-256") values as needed to ensure that large file sizes,
negative mtimes, etc, have the correct values stored in the regular
ustar header.
archive_version: Returns a text string, e.g., "libarchive 1.00.000"
archive_api_version: Returns the SHLIB major version
archive_api_feature: Returns a feature number useful for answering
questions such as "Is this recent enough to do XXX?"
The last two also have macros defined in archive.h, so you can compare
the compile-time and run-time environments. (In particular, you can
compare ARCHIVE_API_VERSION to archive_api_version() to detect library
version mismatches.)
With these in hand, it will soon be time to turn on the
shared-library version of libarchive... stay tuned.
Thanks to: David O'Brien for pointing this out.
Also, add in a few additional portability tweaks and make a few
more things conditional on features (HAVE_XXXX macros) rather
than platform.
In particular, this means we can now correctly read gtar archives that
contain timestamps prior to the start of the Epoch.
Also, make the code in this area more portable. ANSI C99 headers are
not yet ubiquitous (for example, FreeBSD 4 still lacks them), so be
prepared for systems that don't have the INT64_MAX, INT64_MIN, and
UINT64_MAX macros. This version still requires int64_t and uint64_t be
defined (which can be done in archive_platform.h if necessary), but
doesn't require them to be exactly 64 bits.
convenient when the source string isn't null-terminated.
Implement the other conversion functions (mbstowcs(), mbsrtowcs(), wcstombs(),
wcsrtombs()) in terms of these new functions.
for statfs(2). This is false, if the pathname specified
is a regular file, then the information for the file
system that the file lives on will be returned.
Approved by: bmilekic (mentor)
gcc is using. This fixes devstat consumers (like vmstat, iostat,
systat) so they don't print crazy zillion digit numbers for
disk transfers and bandwidth.
According to gcc, long doubles are 64-bits, rather than 128 bits
like the SVR4 ABI spec wants them to be.. Note that MacOSX also treats
long doubles as 64-bits, and not 128 bits, so we are in good company.
Reviewed by: das
Approved by: grehan
- It was added to libc instead of libm. Hopefully no programs rely
on this mistake.
- It didn't work properly on large long doubles because its argument
was converted to type double, resulting in undefined behavior.
notably, this restores some of the contents in thread_db.h as well
as David Xu's copyright notice. This also fixes the includes in
the MD libpthread files which Scott tried to provide a quick fix
for.
Pointy hat: marcel
i386, ia64 and sparc64. Add stubs for alpha, amd64, ia64 and sparc64 for
libpthread.
Restructure the source files to avoid unnecessary use of subdirectories
that also force us to use non-portable compilation flags to deal with
the uncommon compilation requirements (building archive libraries for
linkage into a shared library).
The libpthread support has been copied from the original local and
cleaned-up to make them WARNS=2 clean.
that also force us to use non-portable compilation flags to deal with
the uncommon compilation requirements (building archive libraries for
linkage into a shared library).
The libpthread support has been copied from the original local and
cleaned-up to make them WARNS=2 clean.
Tested on: amd64, i386, ia64
- Unlike the builtin relational operators, builtin floating-point
constants were not available until gcc 3.3, so account for this.[1]
- Apparently some versions of the Intel C Compiler fallaciously define
__GNUC__ without actually being compatible with the claimed gcc
version. Account for this, too.[2]
[1] Noticed by: Christian Hiris <4711@chello.at>
[2] Submitted by: Alexander Leidinger <Alexander@Leidinger.net>
The getfsstat(2) function expects a buffer and a count, and returns a count.
The confusing part is that the count it takes is a byte count, while the
return value is a count of the number of structures it has filled out.
Spell this out.
1. Add global varible _libkse_debug, debugger uses the varible to identify
libpthread. when the varible is written to non-zero by debugger, libpthread
will take some special action at context switch time, it will check
TMDF_DOTRUNUSER flags, if a thread has the flags set by debugger, it won't
be scheduled, when a thread leaves KSE critical region, thread checks
the flag, if it was set, the thread relinquish CPU.
2. Add pq_first_debug to select a thread allowd to run by debugger.
3. Some names prefixed with _thr are renamed to _thread prefix.
which is allowed to run by debugger.
idea is that we perform multibyte->wide character conversion while parsing
and compiling, then convert byte sequences to wide characters when they're
needed for comparison and stepping through the string during execution.
As with tr(1), the main complication is to efficiently represent sets of
characters in bracket expressions. The old bitmap representation is replaced
by a bitmap for the first 256 characters combined with a vector of individual
wide characters, a vector of character ranges (for [A-Z] etc.), and a vector
of character classes (for [[:alpha:]] etc.).
One other point of interest is that although the Boyer-Moore algorithm had
to be disabled in the general multibyte case, it is still enabled for UTF-8
because of its self-synchronizing nature. This greatly speeds up matching
by reducing the number of multibyte conversions that need to be done.
consequently the exponent is only 11 bits. Testing whether the
exponent equals 32767 in that case only effects to compiler warnings
and thus build breakage.
isnormal() the hard way, rather than relying on fpclassify(). This is
a lose in the sense that we need a total of 12 functions, but it is
necessary for binary compatibility because we have never bumped libm's
major version number. In particular, isinf(), isnan(), and isnanf()
were BSD libc functions before they were C99 macros, so we can't
reimplement them in terms of fpclassify() without adding a dependency
on libc.so.5. I have tried to arrange things so that programs that
could be compiled in FreeBSD 4.X will generate the same external
references when compiled in 5.X. At the same time, the new macros
should remain C99-compliant.
The isinf() and isnan() functions remain in libc for historical
reasons; however, I have moved the functions that implement the macros
isfinite() and isnormal() to libm where they belong. Moreover,
half a dozen MD versions of isinf() and isnan() have been replaced
with MI versions that work equally well.
Prodded by: kris
builtins are available: HUGE_VAL, HUGE_VALF, HUGE_VALL, INFINITY,
and NAN. These macros now expand to floating-point constant
expressions rather than external references, as required by C99.
Other compilers will retain the historical behavior. Note that
it is not possible say, e.g.
#define HUGE_VAL 1.0e9999
because the above may result in diagnostics at translation time
and spurious exceptions at runtime. Hence the need for compiler
support for these features.
Also use builtins to implement the macros isgreater(),
isgreaterequal(), isless(), islessequal(), islessgreater(),
and isunordered() when such builtins are available.
Although the old macros are correct, the builtin versions
are much faster, and they avoid double-expansion problems.
class. This is necessary in order to implement tr(1) efficiently in
multibyte locales, since the brute force method of finding all characters
in a class is infeasible with a 32-bit (or wider) wchar_t.
code. <whew!> This version handles all of the following edge cases:
* Restoring explicit dirs with 000 permissions (star fails this test)
* Restore of implicit or explicit dirs when umask=777
(gtar and star both fail this test)
* Restoring dir paths containing "." and ".." components
This version initially creates all dirs with permission 700 (ignoring
umask), then does a post-extract "fixup" pass to set the correct
permissions (which may or may not depend on umask, depending on the
restore flags and whether it's an explicit or implicit dir).
Permissions are restored depth-first so that permissions within
non-writable dirs can be correctly restored. (The depth-sorting does
correctly account for dirs with ".." components.)
under the RETURN VALUES section so it is consistent with others.
Cleanup the return value text for getenv(3) a little while I am here.
PR: docs/58033
MFC after: 3 days
{ip,udp,tcp} header and return a void * pointing to the payload (i.e. the
first byte past the end of the header and any required padding). Use them
consistently throughout libalias to a) reduce code duplication, b) improve
code legibility, c) get rid of a bunch of alignment warnings.
