and close it) and "finish" (destroy the object) functions. For backwards
compat and simplicity, have "finish" invoke "close" transparently if needed.
This allows clients to close the archive and check end-of-operation
statistics before destroying the object.
LIBPTHREAD_SYSTEM_SCOPE in the environment.
You can still force libpthread to be built in strictly 1:1 by
adding -DSYSTEM_SCOPE_ONLY to CFLAGS. This is kept for archs
that don't yet support M:N mode.
Requested by: rwatson
Reviewed by: davidxu
is present for FreeBSD. If you "make distfile" on FreeBSD, you will
soon have a tar.gz file suitable for deploying to other systems
(complete with the expected "configure" script, etc). This latter
relies (at least for now) on the GNU auto??? tools. (I like autoconf
okay, but someday I hope to write a custom Makefile.in and dispense
with automake, which is somewhat odious.)
As part of this, I've cleaned up some of the conditional
compilation options, added make-foo to construct archive.h dynamically
(it now contains some version constants), and added some useful
informational files.
mode bits when setting permissions from ACL data.
Thanks to: David Gilbert for first reporting this and
Jimmy Olgeni for noticing that it only occurred on
ACL-enabled filesystems.
of releases. The -DNOCRYPT build option still exists for anyone who
really wants to build non-cryptographic binaries, but the "crypto"
release distribution is now part of "base", and anyone installing from a
release will get cryptographic binaries.
Approved by: re (scottl), markm
Discussed on: freebsd-current, in late April 2004
the chunk will never be added to the list in that case. Use type mbr
for GPT nested MBRs and use type part for any partition we don't know
or care about. Since the subtype is 0, this should not cause confusion.
libc. The externally-visible effect of this is to add __isnanl() to
libm, which means that libm.so.2 can once again link against libc.so.4
when LD_BIND_NOW is set. This was broken by the addition of fdiml(),
which calls __isnanl().
functions. Basically, the ip_next() function was used to get the PPTP and
Skinny headers when tcp_next() should have been used instead. Symptoms of
this included a segfault in natd when trying to process a PPTP or Skinny
packet.
Approved by: des
example. The externs haven't been needed in about 10 years, so
there's no reason to have them other than for hysterical raisins. And
the California Rasins haven't been around for a long time...
o In the rwlock code: move a duplicated check inside an if..else to after
the if...else clause.
o When initializing a static rwlock move the initialization check
inside the lock.
o In thr_setschedparam.c: When breaking out of the trylock...retry if busy
loop make sure to reset the mtx pointer to null if the mutex is nolonger
in a queue.
code on the existence of the relevant libraries (actually,
the existence of the include files).
This will allow the library to be easily ported to systems
that don't have these libraries. (Of course, it also means
that clients using the library on such systems will not be
able to take advantage of the automatic compression format
detection.)
to describe the 4.4BSD extension of accepting arguments outside the range
of unsigned char. This gives us freedom to remove this extension when we
remove the <rune.h> interface in FreeBSD 6.
These convert plain ASCII characters in-line, making them only slightly
slower than the single-byte ("NONE" encoding) version when processing
ASCII strings.
in the regular ustar header that are overridden by the pax
extended attributes. As a result, it makes perfect sense to
use numeric extensions in the regular ustar header so that readers
that don't understand pax extensions but do understand some other
extensions can still get useful information out of it.
This is especially important for filesizes, as the failure to
read a file size correctly can get the reader out of sync.
This commit introduces a "non-strict" option into the internal
function to format a ustar header. In non-strict mode, the formatter
will use longer octal values (overwriting terminators) or binary
("base-256") values as needed to ensure that large file sizes,
negative mtimes, etc, have the correct values stored in the regular
ustar header.
archive_version: Returns a text string, e.g., "libarchive 1.00.000"
archive_api_version: Returns the SHLIB major version
archive_api_feature: Returns a feature number useful for answering
questions such as "Is this recent enough to do XXX?"
The last two also have macros defined in archive.h, so you can compare
the compile-time and run-time environments. (In particular, you can
compare ARCHIVE_API_VERSION to archive_api_version() to detect library
version mismatches.)
With these in hand, it will soon be time to turn on the
shared-library version of libarchive... stay tuned.
Thanks to: David O'Brien for pointing this out.
Also, add in a few additional portability tweaks and make a few
more things conditional on features (HAVE_XXXX macros) rather
than platform.
In particular, this means we can now correctly read gtar archives that
contain timestamps prior to the start of the Epoch.
Also, make the code in this area more portable. ANSI C99 headers are
not yet ubiquitous (for example, FreeBSD 4 still lacks them), so be
prepared for systems that don't have the INT64_MAX, INT64_MIN, and
UINT64_MAX macros. This version still requires int64_t and uint64_t be
defined (which can be done in archive_platform.h if necessary), but
doesn't require them to be exactly 64 bits.
convenient when the source string isn't null-terminated.
Implement the other conversion functions (mbstowcs(), mbsrtowcs(), wcstombs(),
wcsrtombs()) in terms of these new functions.
for statfs(2). This is false, if the pathname specified
is a regular file, then the information for the file
system that the file lives on will be returned.
Approved by: bmilekic (mentor)
gcc is using. This fixes devstat consumers (like vmstat, iostat,
systat) so they don't print crazy zillion digit numbers for
disk transfers and bandwidth.
According to gcc, long doubles are 64-bits, rather than 128 bits
like the SVR4 ABI spec wants them to be.. Note that MacOSX also treats
long doubles as 64-bits, and not 128 bits, so we are in good company.
Reviewed by: das
Approved by: grehan
- It was added to libc instead of libm. Hopefully no programs rely
on this mistake.
- It didn't work properly on large long doubles because its argument
was converted to type double, resulting in undefined behavior.
notably, this restores some of the contents in thread_db.h as well
as David Xu's copyright notice. This also fixes the includes in
the MD libpthread files which Scott tried to provide a quick fix
for.
Pointy hat: marcel
i386, ia64 and sparc64. Add stubs for alpha, amd64, ia64 and sparc64 for
libpthread.
Restructure the source files to avoid unnecessary use of subdirectories
that also force us to use non-portable compilation flags to deal with
the uncommon compilation requirements (building archive libraries for
linkage into a shared library).
The libpthread support has been copied from the original local and
cleaned-up to make them WARNS=2 clean.
that also force us to use non-portable compilation flags to deal with
the uncommon compilation requirements (building archive libraries for
linkage into a shared library).
The libpthread support has been copied from the original local and
cleaned-up to make them WARNS=2 clean.
Tested on: amd64, i386, ia64
- Unlike the builtin relational operators, builtin floating-point
constants were not available until gcc 3.3, so account for this.[1]
- Apparently some versions of the Intel C Compiler fallaciously define
__GNUC__ without actually being compatible with the claimed gcc
version. Account for this, too.[2]
[1] Noticed by: Christian Hiris <4711@chello.at>
[2] Submitted by: Alexander Leidinger <Alexander@Leidinger.net>
The getfsstat(2) function expects a buffer and a count, and returns a count.
The confusing part is that the count it takes is a byte count, while the
return value is a count of the number of structures it has filled out.
Spell this out.
1. Add global varible _libkse_debug, debugger uses the varible to identify
libpthread. when the varible is written to non-zero by debugger, libpthread
will take some special action at context switch time, it will check
TMDF_DOTRUNUSER flags, if a thread has the flags set by debugger, it won't
be scheduled, when a thread leaves KSE critical region, thread checks
the flag, if it was set, the thread relinquish CPU.
2. Add pq_first_debug to select a thread allowd to run by debugger.
3. Some names prefixed with _thr are renamed to _thread prefix.
which is allowed to run by debugger.
idea is that we perform multibyte->wide character conversion while parsing
and compiling, then convert byte sequences to wide characters when they're
needed for comparison and stepping through the string during execution.
As with tr(1), the main complication is to efficiently represent sets of
characters in bracket expressions. The old bitmap representation is replaced
by a bitmap for the first 256 characters combined with a vector of individual
wide characters, a vector of character ranges (for [A-Z] etc.), and a vector
of character classes (for [[:alpha:]] etc.).
One other point of interest is that although the Boyer-Moore algorithm had
to be disabled in the general multibyte case, it is still enabled for UTF-8
because of its self-synchronizing nature. This greatly speeds up matching
by reducing the number of multibyte conversions that need to be done.
consequently the exponent is only 11 bits. Testing whether the
exponent equals 32767 in that case only effects to compiler warnings
and thus build breakage.
isnormal() the hard way, rather than relying on fpclassify(). This is
a lose in the sense that we need a total of 12 functions, but it is
necessary for binary compatibility because we have never bumped libm's
major version number. In particular, isinf(), isnan(), and isnanf()
were BSD libc functions before they were C99 macros, so we can't
reimplement them in terms of fpclassify() without adding a dependency
on libc.so.5. I have tried to arrange things so that programs that
could be compiled in FreeBSD 4.X will generate the same external
references when compiled in 5.X. At the same time, the new macros
should remain C99-compliant.
The isinf() and isnan() functions remain in libc for historical
reasons; however, I have moved the functions that implement the macros
isfinite() and isnormal() to libm where they belong. Moreover,
half a dozen MD versions of isinf() and isnan() have been replaced
with MI versions that work equally well.
Prodded by: kris
builtins are available: HUGE_VAL, HUGE_VALF, HUGE_VALL, INFINITY,
and NAN. These macros now expand to floating-point constant
expressions rather than external references, as required by C99.
Other compilers will retain the historical behavior. Note that
it is not possible say, e.g.
#define HUGE_VAL 1.0e9999
because the above may result in diagnostics at translation time
and spurious exceptions at runtime. Hence the need for compiler
support for these features.
Also use builtins to implement the macros isgreater(),
isgreaterequal(), isless(), islessequal(), islessgreater(),
and isunordered() when such builtins are available.
Although the old macros are correct, the builtin versions
are much faster, and they avoid double-expansion problems.
class. This is necessary in order to implement tr(1) efficiently in
multibyte locales, since the brute force method of finding all characters
in a class is infeasible with a 32-bit (or wider) wchar_t.
code. <whew!> This version handles all of the following edge cases:
* Restoring explicit dirs with 000 permissions (star fails this test)
* Restore of implicit or explicit dirs when umask=777
(gtar and star both fail this test)
* Restoring dir paths containing "." and ".." components
This version initially creates all dirs with permission 700 (ignoring
umask), then does a post-extract "fixup" pass to set the correct
permissions (which may or may not depend on umask, depending on the
restore flags and whether it's an explicit or implicit dir).
Permissions are restored depth-first so that permissions within
non-writable dirs can be correctly restored. (The depth-sorting does
correctly account for dirs with ".." components.)
under the RETURN VALUES section so it is consistent with others.
Cleanup the return value text for getenv(3) a little while I am here.
PR: docs/58033
MFC after: 3 days
{ip,udp,tcp} header and return a void * pointing to the payload (i.e. the
first byte past the end of the header and any required padding). Use them
consistently throughout libalias to a) reduce code duplication, b) improve
code legibility, c) get rid of a bunch of alignment warnings.
a short pointer. The previous implementation seems to be in a gray zone
of the C standard, and GCC generates incorrect code for it at -O2 or
higher on some platforms.
These trivial implementations are about 25 times slower than
rint{,f}() on x86 due to the FP environment save/restore.
They should eventually be redone in terms of fegetround() and
bit fiddling.
named link, foo_link or link_foo to lnk, foo_lnk or lnk_foo, fixing
signed / unsigned comparisons, and shoving unused function arguments
under the carpet.
I was hoping WARNS?=6 might reveal more serious problems, and perhaps
the source of the -O2 breakage, but found no smoking gun.
pointer to the corresponding struct thread to the thread ID (lwpid_t)
assigned to that thread. The primary reason for this change is that
libthr now internally uses the same ID as the debugger and the kernel
when referencing to a kernel thread. This allows us to implement the
support for debugging without additional translations and/or mappings.
To preserve the ABI, the 1:1 threading syscalls, including the umtx
locking API have not been changed to work on a lwpid_t. Instead the
1:1 threading syscalls operate on long and the umtx locking API has
not been changed except for the contested bit. Previously this was
the least significant bit. Now it's the most significant bit. Since
the contested bit should not be tested by userland, this change is
not expected to be visible. Just to be sure, UMTX_CONTESTED has been
removed from <sys/umtx.h>.
Reviewed by: mtm@
ABI preservation tested on: i386, ia64
applied to their permissions. Just calculate the
default dir mode once and use it consistently, rather than
trying to remember to calculate it everywhere it's needed.
* Rename some variables/functions/etc to try to make things clearer.
* Add separate flags to control fflag/acl restore
* Collect metadata restore into a single function for clarity
* Propagate errors in metadata restore back out to the client
* Fix some places where errors were being returned when they
shouldn't and vice-versa
* Modes are now always restored; ARCHIVE_EXTRACT_PERM just controls
whether or not umask is obeyed.
* Restore suid/sgid bits only if user/group matches archive
* Cache the last stat results to try to reduce the number of stat calls
archive_entry.
Update the Makefile MLINKS and manpage to bring it up-to-date with
the current status of archive_entry. At least the manpage actually
lists all of the functions now, even if it doesn't really yet explain
them all.
Mostly, these were being used correctly even though a lot of
variables and function names were mis-named.
In the process, I found and fixed a couple of latent bugs and
added a guard against adding an archive to itself.
a/././b/../b/../c/./../d/e/f now work correctly. And yes, a/b and a/c
both get created in this example; if you want, you can create an
entire dir heirarchy from a tar archive with only one entry.
More tweaks to umask support: umasks are now obeyed for all objects,
not just directories; the umask used is now the one in effect at the
corresponding call to archive_read_extract(), so clients that want to
tinker with umask during extract should get the expected behavior.
a fork, make sure that the current thread isn't detached and freed. As
a consequence the thread should be inserted into the head of the
active list only once (in the beginning).
umask in effect when the archive is closed
* Correct a typo that broke implicit dir creation for non-directories.
Thanks to: Garret A Wollman for pointing out my umask oversight
read_extract_dir (which creates directories in the archive). This
brings a number of advantages:
* FINALLY fix the problems creating dirs ending in "/." <sigh>
* Missing parent dirs now get created securely, just like explicit dirs.
(Created 0700 initially, then edited to 0755 at end of extraction.)
* Eliminate some duplicate code and some weird special cases.
While I'm cleaning, inline the regular-file creation code as well.
This change also pointed out one API deficiency: the
archive_read_data_into_XXX functions were originally defined to return
the total bytes read. This is, of course, ambiguous when dealing with
non-contiguous files. Change it to just return a status value.
with ``__'' to avoid polluting the namespace. This doesn't change the
documented rune interface at all, but breaks applications that accessed
_RuneLocale directly.
These routines are specified in C99 for the sake of
architectures where an int isn't big enough to represent
the full range of floating-point exponents. However,
even the 128-bit long double format has an exponent smaller
than 15 bits, so for all practical purposes, scalbln() and
scalblnf() are aliases for scalbn() and scalbnf(), respectively.
ki_childutime, and ki_emul. Also uses the timeradd() macro to correct
the calculation of ki_childtime. That will correct the value returned
when ki_childtime.tv_usec > 1,000,000.
This also implements a new KERN_PROC_GID option for kvm_getprocs().
It also implements the KERN_PROC_RGID and KERN_PROC_SESSION options
which were added to sys/kern/kern_proc.c revision 1.203.
PR: bin/65803 (a very tiny piece of the PR)
Submitted by: Cyrille Lefevre
kicking and screaming into the 1980's. This change converts most of
the markup from man(7) to mdoc(7) format, and I believe it removes or
updates everything that was flat out wrong. However, much work is
still needed to sanitize the markup, improve coverage, and reduce
overlap with other manpages. Some of the sections would better belong
in a philosophy_of_w_kahan.3 manpage, but they are informative and
remain at least as reminders of topics to cover.
Reviewed by: doc@, trhodes@
The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()
Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
