Commit Graph

64948 Commits

Author SHA1 Message Date
Bill Paul
245dd946e3 Fix typo: BGGPHY -> BRGPHY in one of the #defines I added the other day. 2001-09-27 17:32:49 +00:00
Garance A Drosehn
ceeaedd3cc Basically rewrite the sortq() routine which is used by 'lpc clean' and
'lpc tclean'.  In some obscure cases, the previous version could cause a
valid user job to be removed (by 'clean'), due to invalid assumptions in
the sort routine.  This was a rare problem, unless ctlinfo.c is compiled
with 'LEAVE_TMPCF_FILES' turned on (to check what that rtn was doing).

Reviewed by:	Lack of outcry on -audit and freebsd-print@bostonradio.org
MFC after:	10 days
2001-09-27 17:16:53 +00:00
David E. O'Brien
838bc11f60 We need to build ``.depend'' early in the "build-tools" for the GCC
"build-tools".  If we do not do this, the "depend" stage of
"buildworld" will build ``.depend'' and it will record the wrong
library and header dependencies (DESTDIR=${WORLDTMP}).  Even worse,
the "all" stage may clobber build-architecture-format build tools
built in the "build-tools" stage with target-architecture-format ones.

Submitted by:	ru
2001-09-27 17:14:33 +00:00
Jonathan Lemon
3a163803b7 Gate low level console output on mtx_lock_spin(&sio_lock), if the
sio_lock has been initialized.  This prevents the low level console
output (kernel printf) from clobbering the sio settings if the system
happens to be in the middle of comstart().
2001-09-27 17:00:25 +00:00
Luigi Rizzo
04d4d7cf05 Add entries for vmware interfaces. 2001-09-27 16:48:13 +00:00
Luigi Rizzo
e8b19bc63e Enable the use of wildcards in the #ethertable section of
/etc/hosts to map MAC addresses to hostnames.

Main use is to get addresses for vmware interfaces.
2001-09-27 16:47:45 +00:00
Warner Losh
5119d237e5 Add note about buildworld being fixed. 2001-09-27 15:43:04 +00:00
Luigi Rizzo
88f6feee74 Fix typo in a comment.
MFC-after: 3 days
2001-09-27 12:01:57 +00:00
Luigi Rizzo
832d32eb5b Remove unused (and duplicate) struct ip_opts which is never used,
not referenced in Stevens, and does not compile with g++.
There is an equivalent structure, struct ipoption in ip_var.h
which is actually used in various parts of the kernel, and also referenced
in Stevens.

Bill Fenner also says:
... if you want the trivia, struct ip_opts was introduced
in in.h SCCS revision 7.9, on 6/28/1990, by Mike Karels.
struct ipoption was introduced in ip_var.h SCCS revision 6.5,
on 9/16/1985, by... Mike Karels.

MFC-after: 3 days
2001-09-27 11:53:22 +00:00
Murray Stokely
fd197202f9 Update a comment to reflect the param.c -> subr_param.c move.
PR:		kern/30766
Submitted by:	Kevin Way <kevin.way@overtone.org>
2001-09-27 09:58:30 +00:00
Julian Elischer
f1f9d42a53 Quick hack to print out the non-standard pppoe used by 3com 2001-09-27 08:02:27 +00:00
Murray Stokely
37068be4f9 Be consistent with the way we talk about sysctl values.
PR:		docs/30343
Submitted by:	Giorgos Keramidas <charon@labs.gr>
2001-09-27 07:26:16 +00:00
Alfred Perlstein
e93d0738f5 This driver can talk to the Rio600 as well, make it happen.
Hardware (and patience) provided by: Andrew J Caines <A.J.Caines@halplant.com>
2001-09-27 06:01:20 +00:00
Brooks Davis
9658e15840 NULL commit due to misunderstanding "cvs commit -m <blah>". The
previous log message "/home/brooks/ng_gif.message" should have read:

Add a pair of new netgraph nodes.  The ng_gif node is like ng_ether
except that it works on gif interfaces.  The ng_gif_demux node attaches
to an ng_gif node to allow separate processing or discarding of
different types of encapsulated traffic.
2001-09-27 03:14:17 +00:00
Jonathan Lemon
fe16674a74 Return EINVAL if the passed intr is out of bounds.
PR: 30857
Submitted by: David Xu <davidx@viasoft.com.cn>
MFC: 1 week
2001-09-27 02:46:47 +00:00
Peter Wemm
ea7fe289fe Tidy up nfsm_build usage. This is only partially finished. 2001-09-27 02:33:36 +00:00
Murray Stokely
a43a70d6c6 Tip Correction : s/seconds/minutes/
PR:		docs/30844
Submitted by:	Andrew <andrew@ugh.net.au>
2001-09-27 00:43:28 +00:00
Brooks Davis
cf776d8152 The initial commit contained an error in the license, this is the
correct one.
2001-09-27 00:04:29 +00:00
Peter Wemm
c7f9a7e8ae Oops, forgot to rm this last time. 2001-09-26 23:57:25 +00:00
Brooks Davis
94408d94c3 /home/brooks/ng_gif.message 2001-09-26 23:50:17 +00:00
Brooks Davis
20af0ffaa1 Use LIST_ macros instead of TAILQ_ macros to be more like NetBSD.
Obtained from:	NetBSD
2001-09-26 23:37:15 +00:00
Brooks Davis
efacde1bcc The number of ccd(4) devices is no longer set at compile time so stop
trying to do it in the examples and config files.
2001-09-26 22:41:02 +00:00
Brooks Davis
2862fc7a49 Call securelevel_gt with a credential. Also, s/p/td->td_proc/.
Submitted by:	LINT
2001-09-26 22:02:01 +00:00
Brooks Davis
49c024e373 Include sys/proc.h for the definition of securelevel_ge().
Submitted by:	LINT
2001-09-26 21:53:20 +00:00
David E. O'Brien
7d437141ba Unconditionally use basename.c source vs. only doing this if the libc we
are linking against does not have basename().  There is a buffer overflow
bug in lib/libc/gen/basename.c rev 1.1.  There is no way for us to test
what revision of basename() we have in libc, thus this change.

Requested by:	ru
2001-09-26 20:51:51 +00:00
Robert Watson
57358f1e93 o Re-enable support of system file flags in jail() by adding back the
PRISON_ROOT to the suser_xxx() check.  Since securelevels may now
  be raised in specific jails, use of system flags can still be
  restricted in jail(), but in a more configurable way.
o Users of jail() expecting system flags (such as schg) to restrict
  jail()'s should be sure to set the securelevel appropriately in
  jail()'s.
o This fixes activities involving automated system flag removal in
  jail(), including installkernel and friends.

Obtained from:	TrustedBSD Project
2001-09-26 20:44:41 +00:00
Robert Watson
87fce2bb96 o When performing a securelevel check as part of securelevel_ge() or
securelevel_gt(), determine first if a local securelevel exists --
  if so, perform the check based on imax(local, global).  Otherwise,
  simply use the global value.
o Note: even though local securelevels might lag below the global one,
  if the global value is updated to higher than local values, maximum
  will still be used, making the global dominant even if there is local
  lag.

Obtained from:	TrustedBSD Project
2001-09-26 20:41:48 +00:00
Robert Watson
8a528812a0 o Modify kern.securelevel MIB entry to return a local securelevel, if
one is present in the current jail, otherwise, to return the global
  securelevel.
o If the securelevel is being updated, require that it be greater than
  the maximum of local and global, if a local securelevel exists,
  otherwise, just maximum of the global.  If there is a local
  securelevel, update the local one instead of the global one.
o Note: this does allow local securelevels to lag behind the global one
  as long as the local one is not updated following a global increase.

Obtained from:	TrustedBSD Project
2001-09-26 20:39:48 +00:00
Robert Watson
567931c8f6 o Initialize per-jail securelevel from global securelevel as part of
jail creation.

Obtained from:	TrustedBSD Project
2001-09-26 20:37:15 +00:00
Robert Watson
bda63e26d8 o Introduce pr_securelevel, which holds a per-jail securelevel.
Obtained from:	TrustedBSD Project
2001-09-26 20:36:08 +00:00
Robert Watson
6748bcc51e o Modify ufs_setattr() so that it uses securelevel_gt() instead of
direct variable access.

Obtained from:	TrustedBSD Project
2001-09-26 20:31:37 +00:00
Robert Watson
8c5d4fe829 o Modify access control checks in mmap() to use securelevel_gt() instead
of direct variable access.

Obtained from:	TrustedBSD Project
2001-09-26 20:29:39 +00:00
Robert Watson
3026f29e34 o securelevel_gt() patches came from pre-KSE alpha -- this revision
fixes the compile and uses td->td_proc instead of p.

Obtained from:	TrustedBSD Project
2001-09-26 20:27:23 +00:00
Robert Watson
e8a340cd9a o Modify pc98 syscons code to use securelevel_gt() instead of
direct variable checks.  (Yet another API to perform direct hardware I/O).

Obtained from:	TrustedBSD Project
2001-09-26 20:26:32 +00:00
Robert Watson
b9c6f21493 o Modify the access control checks for the ia64 /dev/mem (and friends)
to use securelevel_gt() instead of direct variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:24:23 +00:00
Jeroen Ruigrok van der Werven
54045486e0 Add ERRORS section.
Mention thread safety and async-cancel safety status [not].
Add standards compliancy references.
Note strtol() is preferred over atoi().

MFC after:	2 weeks
2001-09-26 20:22:44 +00:00
Robert Watson
41c42188c8 o Modify access control checks in linux_iopl() to use securelevel_gt()
rather than direct variable checks.  (Yet another API to perform
  direct hardware I/O.)

Obtained from:	TrustedBSD Project
2001-09-26 20:22:38 +00:00
Robert Watson
ce3a32b6da o Modify pcvt ioctl() security checks to use securelevel_gt() instead
of direct securelevel variable checks.  (Yet another API to perform
  direct hardware I/O using KDENABIO.)

Obtained from:	TrustedBSD Project
2001-09-26 20:21:28 +00:00
Robert Watson
9997f52470 o Modify spigot_open() to use securelevel_gt() instead of direct
securelevel variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:20:05 +00:00
Robert Watson
f86cf763ef o Modify generic specfs device open access control checks to use
securelevel_ge() instead of direct securelevel variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:18:26 +00:00
Robert Watson
8c7cc7234e o Modify syscons ioctl securelevel checks to use securelevel_gt() (oh look,
yet another API to do direct hardware I/O access.)

Obtained from:	TrustedBSD Project
2001-09-26 20:17:15 +00:00
Robert Watson
19f1565901 o Modify open() and close() for /dev/random to use securelevel_gt() instead
of direct securelevel variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:15:42 +00:00
Robert Watson
8002488bd9 o Modify access control code for /dev/pci device to use securelevel_gt()
instead of direct securelevel variable test.

Obtained from:	TrustedBSD Project
2001-09-26 20:14:03 +00:00
Robert Watson
f7312ca2a9 o Modify access control code for the CAM SCSI pass-through device to
use securelevel_gt() instead of direct securelevel variable test.

Obtained from:	TrustedBSD Project
2001-09-26 20:13:16 +00:00
Jeroen Ruigrok van der Werven
5578cfa2fa Be explicit about the POSIX version it conforms to [in this case 1990].
Put the error comment under the more appropriate ERRORS section.
2001-09-26 20:10:10 +00:00
Robert Watson
330e78897a o Modify i386_set_ioperm() to use securelevel_gt() instead of
direct securelevel variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:08:15 +00:00
Robert Watson
1851c8fd41 o Modify device open access control for /dev/mem and friends to use
securelevel_gt() instead of direct securelevel variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:08:02 +00:00
Robert Watson
785f9ffca3 o Modify IPFW and DUMMYNET administrative setsockopt() calls to use
securelevel_gt() to check the securelevel, rather than direct access
  to the securelevel variable.

Obtained from:	TrustedBSD Project
2001-09-26 19:58:29 +00:00
Robert Watson
d501d04b9e o Modify static settime() to accept the proc * for the process requesting
a time change, and callers so that they provide td->td_proc.
o Modify settime() to use securevel_gt() for securelevel checking.

Obtained from:	TrustedBSD Project
2001-09-26 19:53:57 +00:00
Robert Watson
c2f413af19 o Modify sysctl access control check to use securelevel_gt(), and
clarify sysctl access control logic.

Obtained from:	TrustedBSD Project
2001-09-26 19:51:25 +00:00