- sysctl dev.acpi_hp.0.verbose to toggle debug output
- A modification so this can deal with different array lengths
when reading the CMI BIOS - now it works ok on HP Compaq nx7300
as well.
- Change behaviour to query only max_instance-1 CMI BIOS instances,
because all HPs seen so far are broken in that respect
(or there is a fundamental misunderstanding on my side, possible
as well). This way a disturbing ACPI Error Field exceeds Buffer
message is avoided.
- New bit to set on dev.acpi_hp.0.cmi_detail (0x8) to
also query the highest guid instance of CMI bios
acpi_hp.4:
- Document dev.acpi_hp.0.verbose sysctl in man page
- Document new bit for dev.acpi_hp.0.cmi_detail
- Add a section to manpage about hardware that has been reported
to work ok
Submitted by: Michael Gmelin <freebsdusb at bindone.de>
Approved by: re (kib)
MFC after: 2 weeks
via cpuctl(4) driver. Two new CPUCTL_MSRSBIT and CPUCTL_MSRCBIT ioctl(2)
calls treat the data field of the argument struct passed as a mask
and set/clear bits of the MSR register according to the mask value.
- Allow user to perform atomic bitwise AND and OR operaions on MSR registers
via cpucontrol(8) utility. Two new operations ("&=" and "|=") have been
added. The first one applies bitwise AND operaion between the current
contents of the MSR register and the mask, and the second performs bitwise
OR. The argument can be optionally prefixed with "~" inversion operator.
This allows one to mimic the "clear bit" behavior by using the command
like this:
cpucontrol -m 0x10&=~0x02 # clear the second bit of TSC MSR
Inversion operator support in all modes (assignment, OR, AND).
Approved by: re (kib)
MFC after: 1 month
- Document different semantics for ACPI_WMI_PROVIDES_GUID_STRING_METHOD
acpi_wmi.c:
- Modify acpi_wmi_provides_guid_string_method to return absolut number of
instances known for the given GUID.
acpi_hp.c:
- sysctl dev.acpi_hp.0.verbose to toggle debug output
- A modification so this can deal with different array lengths
when reading the CMI BIOS - now it works ok on HP Compaq nx7300
as well.
- Change behaviour to query only max_instance-1 CMI BIOS instances,
because all HPs seen so far are broken in that respect
(or there is a fundamental misunderstanding on my side, possible
as well). This way a disturbing ACPI Error Field exceeds Buffer
message is avoided.
- New bit to set on dev.acpi_hp.0.cmi_detail (0x8) to
also query the highest guid instance of CMI bios
acpi_hp.4:
- Document dev.acpi_hp.0.verbose sysctl in man page
- Document new bit for dev.acpi_hp.0.cmi_detail
- Add a section to manpage about hardware that has been reported
to work ok
Submitted by: Michael Gmelin, freebsdusb at bindone.de
Approved by: re (kib)
MFC after: 2 weeks
Import if_epair(4), a virtual cross-over Ethernet-like interface pair.
Note these files are 1:1 from p4 and not yet connected to the build
not knowing about the new netisr interface.
Sponsored by: The FreeBSD Foundation
* Driver for ACPI HP extra functionations, which required
ACPI WMI driver.
Submitted by: Michael <freebsdusb at bindone.de>
Approved by: re
MFC after: 2 weeks
version field sent via gif(4)+if_bridge(4). The EtherIP
implementation found on FreeBSD 6.1, 6.2, 6.3, 7.0, 7.1, and 7.2 had
an interoperability issue because it sent the incorrect EtherIP
packets and discarded the correct ones.
This change introduces the following two flags to gif(4):
accept_rev_ethip_ver: accepts both correct EtherIP packets and ones
with reversed version field, if enabled. If disabled, the gif
accepts the correct packets only. This flag is enabled by
default.
send_rev_ethip_ver: sends EtherIP packets with reversed version field
intentionally, if enabled. If disabled, the gif sends the correct
packets only. This flag is disabled by default.
These flags are stored in struct gif_softc and can be set by
ifconfig(8) on per-interface basis.
Note that this is an incompatible change of EtherIP with the older
FreeBSD releases. If you need to interoperate older FreeBSD boxes and
new versions after this commit, setting "send_rev_ethip_ver" is
needed.
Reviewed by: thompsa and rwatson
Spotted by: Shunsuke SHINOMIYA
PR: kern/125003
MFC after: 2 weeks
We will look at renaming stuff for 9.0, but it's far from certain that we
will do it this way.
- Sort sysctl's alphabetically. I'll add a bunch of new sysctl's once
ariff's next mega-patch goes in, and having everything sorted makes my
job easier.
While there remain some incomplete aspects of the implementation (such
as incomplete auditing of some system calls), the implementation has
been burned in for a few years, as well as in GENERIC for a few years.
Obtained from: TrustedBSD Project
ip6_input.c, in6.h:
* Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6.
* Always set this flag if HBH Router Alert option is present for MLD,
even when not forwarding.
icmp6.c:
* In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent.
* Use scope ID for verifying input. Do not apply SSM filters here, no inpcb.
* Check for M_RTALERT_MLD when validating MLD traffic, as we can't see
IPv6 hop options outside of ip6_input().
in6_mcast.c:
* Use KAME scope/zone ID in in6_multi.
* Update net.inet6.ip6.mcast.filters implementation to use scope IDs
for comparisons.
* Fix scope ID treatment in multicast socket option processing.
Scope IDs passed in from userland will be ignored as other less
ambiguous APIs exist for specifying the link.
* Tighten userland input checks in IPv6 SSM delta and full-state ops.
* Source filter embedded scope IDs need to be revisited, for now
just clear them and ignore them on input.
* Adapt KAME behaviour of looking up the scope ID in the default zone
for multicast leaves, when the interface is ambiguous.
mld6.c:
* Tighten origin checks on MLD traffic as per RFC3810 Section 6.2:
* ip6_src MAY be the unspecified address for MLDv1 reports.
* ip6_src MAY have link-local address scope for MLDv1 reports,
MLDv1 queries, and MLDv2 queries.
* Perform address field validation *before* accepting queries.
* Use KAME scope/zone ID in query/report processing.
* Break const correctness for mld_v1_input_report(), mld_v1_input_query()
as we temporarily modify the input mbuf chain.
* Clear the scope ID before handoff to userland MLD daemon.
* Fix MLDv1 old querier present timer processing.
With the protocol defaults, hosts should revert to MLDv2 after 260s.
* Add net.inet6.mld.v1enable sysctl, default to on.
ifmcstat.c:
* Use sysctl by default; -K requests kvm(3) if so compiled.
mld.4:
* Connect man page to build.
Tested using PCS.
get a quick snapshot of the kernel's symbol table including the symbols
from any loaded modules (the symbols are all merged into one symbol
table). Unlike like other implementations, this ksyms driver maps
memory in the process memory space to store the snapshot at the time
/dev/ksyms is opened. It also checks to see if the process has already
a snapshot open and won't allow it to open /dev/ksyms it again until it
closes first. This prevents kernel and process memory from being
exhausted. Note that /dev/ksyms is used by the lockstat(1) command.
Reviewed by: gallatin kib (freebsd-arch)
Approved by: gnn (mentor)
kernel option.
This also permits tuning of the option per virtual network stack, as
well as separately per inet, inet6.
The kernel option is left for a transition period, marked deprecated,
and will be removed soon.
Initially requested by: phk (1 year 1 day ago)
MFC after: 4 weeks
This allows users to increase the maximum amount of pseudo-terminals
without changing any source code. Users must increase UT_LINESIZE before
attempting to increase kern.pts_maxdev.
Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).
If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.
Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
lists.
driver in Linux 2.6. uscanner was just a simple wrapper around a fifo and
contained no logic, the default interface is now libusb (supported by sane).
Reviewed by: HPS
avoidance:
- Enable setting the RXCSUM and TXCSUM flags for loopback interfaces;
set both by default.
- When RXCSUM is set, flag packets sent over the loopback interface as
having checked and valid IP, UDP, TCP checksums so that higher
protocol layers won't check them.
- Always clear CSUM_{IP,UDP_TCP} checksum required flags on transmit,
as they will have gotten there as a result of TXCSUM being set.
This is done only for packets explicitly sent over the loopback, not
simulated loopback via if_simloop() due to !SIMPLEX interfaces, etc.
Note that enabling TXCSUM but not RXCSUM will lead to unhappiness, as
checksums won't be generated but will be validated.
Kris reports that this leads to significant performance improvements
in loopback benchmarking with TCP and UDP for throughput:
RXCSUM RXCSUM+TXCSUM
TCP 15% 37%
UDP 10% 74%
Update man page.
Reviewed by: sam
Tested by: kris
MFC after: 1 week
