Both scripted access (packageDelete) and UI access have been tested
successfully with a variation of different situations including:
+ Uninstall a package which no other installed package depends
+ Uninstall multiple packages which no other installed packages depend
+ Uninstall multiple packages which depend on each other
+ Similar to above but when ordered removal requires tracing dependencies
+ Purposefully do things like uninstall a package that is not installed
+ Try to uninstall a package which other installed packages still depend
+ Try to uninstall multiple packages which other installed packages depend
+ And many more.
because [currently] we exit after performing requests actions -- if we
ever change this to returning to the package selection screen, this would
have made an impact).
sysinstall(8). The UI for this will come later while this exposes the
functionality to the scripted interface. Tested successfully to first
install the pcnfsd package from the `Latest' repository, and second to
configure mountd_flags="-n" in rc.conf(5).
pending). Both scripted access (packageAdd) and UI access have been tested
successfully with a variation of different situations including:
+ Install a package with no dependencies
+ Install a package with dependencies that are already installed
+ Install a package with dependencies where some are already installed
+ Repeat each of the above from FTP and local Directory
+ Purposefully do things like try to install a package that does not exist
+ Try to install a package for which a dependency could not be loaded
+ Try to install a package that is in the INDEX bot not on the media
+ And many more.
when the interface is up.
- Add a tunable to control the TOE's rx coalesce feature (enabled by
default as it always has been). Consider the interface MTU or the
coalesce size when deciding which cluster zone to use to fill the
offload rx queue's free list. The tunable is:
dev.{t4nex,t5nex}.<N>.toe.rx_coalesce
MFC after: 1 day
* Add 802.11n 2ghz and 5ghz tables, including legacy rates and up to
MCS23 rates (3x3.)
* Populate the rate code -> rate index lookup table with MCS _and_
normal rates, but _not_ the basic rate flag. Since the basic rate flag
is the same as the MCS flag, we can only use one.
* Introduce some accessor inlines that do PLCP and rate table lookup/access
and enforce that it doesn't set the basic rate bit. They're not
designed for MCS rates, so it will panic.
* Start converting drivers that use the rate table stuff to use the
accessor inlines and strip the basic flag.
* Teach AMRR about basic 11n - it's still as crap for MCS as it is
being used by iwn, so it's not a step _backwardS_.
* Convert iwn over to accept 11n MCS rates rather than 'translate' legacy
to MCS rates. It doesn't use a lookup table any longer; instead it's a
function which takes the current node (for HT parameters) and the
rate code, and returns the hardware PLCP code to use.
Tested:
* ath - it's a no-op, and it works that way
* iwn - both 11n and non-11n
ePWM is controlled by sysctl nodes dev.am335x_pwm.N.period,
dev.am335x_pwm.N.dutyA and dev.am335x_pwm.N.dutyB that controls
PWM period and duty cycles for channels A and B respectively.
Period and duty cycle are measured in clock ticks. Default
clock frequency for AM335x PWM subsystem is 100MHz
allowed to ignore the probe_only argument of its member functions solely
because in the C language, the file accessor methods open and return a file
descriptor and reading of the data is optional. In shell, the file accessor
methods return data on stdout and that data should not be ignored (large
files could block execution).
So, we must adhere to the probe_only flags and in some cases (in the case of
FTP, for example) change the `get' strategy to simply test existence and
return an appropriate status.
This was required because the up-coming package management stuff makes heavy
use of the probe_only argument to try different package suffixes. Every
media access module must implement $probe_only for the `get' accessor.
Add MachineBasicBlock::addLiveIn().
This function adds a live-in physical register to an MBB and ensures
that it is copied to a virtual register immediately.
Pull in r185615 from llvm trunk:
Live-in copies go *after* EH_LABELs.
This will soon be tested by exception handling working at all.
Pull in r185617 from llvm trunk:
Simplify landing pad lowering.
Stop using the ISD::EXCEPTIONADDR and ISD::EHSELECTION when lowering
landing pad arguments. These nodes were previously legalized into
CopyFromReg nodes, but that never worked properly because the
CopyFromReg node weren't guaranteed to be scheduled at the top of the
basic block.
This meant the exception pointer and selector registers could be
clobbered before being copied to a virtual register.
This patch copies the two physical registers to virtual registers at
the beginning of the basic block, and lowers the landingpad instruction
directly to two CopyFromReg nodes reading the *virtual* registers. This
is safe because virtual registers don't get clobbered.
A future patch will remove the ISD::EXCEPTIONADDR and ISD::EHSELECTION
nodes.
Together, these changes fix llvm PR 16038 ('qt4 webcore file results in
"Bad machine code: Using an undefined physical register"'), and should
make it possible again to compile the www/qt4-webkit port again on the
i386 arch, without using a CPUTYPE=i686 or higher setting.
It's not enabled by default in net80211 so this is a no-op unless
if you enable it (ifconfig wlan0 powersave).
Tested:
* iwn0: <Intel WiFi Link 5100> mem 0xf4300000-0xf4301fff irq 17 at device 0.0 on pci3
TODO:
* .. test on all the other NICs
* See if I have to disable it during scan and such
* Make it configurable live, rather than only after it's done its initial
receive calibration.
dereferencing, when checking for SO_REUSEPORT option (and SO_REUSEADDR
for multicast), INP_REUSEPORT flag was introduced to cache the socket
option. It was decided then that one flag would be enough to cache
both SO_REUSEPORT and SO_REUSEADDR: when processing SO_REUSEADDR
setsockopt(2), it was checked if it was called for a multicast address
and INP_REUSEPORT was set accordingly.
Unfortunately that approach does not work when setsockopt(2) is called
before binding to a multicast address: the multicast check fails and
INP_REUSEPORT is not set.
Fix this by adding INP_REUSEADDR flag to unconditionally cache
SO_REUSEADDR.
PR: 179901
Submitted by: Michael Gmelin freebsd grem.de (initial version)
Reviewed by: rwatson
MFC after: 1 week
r252680:
Fix SIM lock not owned panic
The CAM locking requirements of registering an async
callback has changed so the SIM lock must be held. Remove
code that explicitly dropped the lock around the register.
Also return CAM_SEL_TIMEOUT instead of CAM_TID_INVALID
for bad targets to avoid a lot console spam during bus
scans.
MFC after: 1 month
This commit is primarily a significant cleanup to the interrupt
allocation code that had gotten a bit jumbled from having to
support per-vq MSIX, shared MSIX, MSI, and legacy style interrupts.
Contains projects/virtio commits:
r246064:
virtio_pci: Rewrite allocation of interrupts
r246065:
virtio_pci: Remove spaces before a tab
r246066:
virtio_pci: Dynamically allocate the virtqueue array
r246304:
virtio_pci: Clean up after failed virtqueue alloc attempt
r246305:
virtio_pci: Move no interrupt check into the PCI interrupt handlers
r246308:
virtio_pci: Remove unused variable
MFC after: 1 month
Minor changes to the network driver. A multiqueue driver that is
a significant rewrite will be in merged shortly.
Contains projects/virtio commits:
r246058:
vtnet: Move an mbuf ASSERT to the calling function
r246059:
vtnet: Tweak ASSERT message
MFC after: 1 month
Contains projects/virtio commits:
r245717:
virtio_balloon: Make the softc lock a regular mutex
r245718:
virtio_balloon: Remove two unuseful ASSERTs
r245719:
virtio_balloon: More verbose ASSERT messages
r245720:
virtio_balloon: Simplify lowmem handling in vtballoon_inflate()
r252530:
virtio_balloon: Use just a kthread instead of dedciated kproc
r252568:
virtio_balloon: Need to use kthread_exit() after r252530
MFC after: 1 month
The notable changes of this commit are support for disk resizing
and chases updates to the spec regarding write caching.
Contains projects/virtio commits:
r245713:
virtio_blk: Replace __FUNCTION__ with __func__
r245714:
virtio_blk: Use more consistent mutex name
r245715:
virtio_blk: Print device name too if failed to reinit during dump
r245716:
virtio_blk: Remove an unuseful ASSERT
r245723:
virtio_blk: Record the vendor and device information
r245724:
virtio_blk: Add resize support
r245726:
virtio_blk: More verbose ASSERT messages
r245730:
virtio_blk: Tweak resize announcement message
r246061:
virtio_blk: Do not always read entire config
r246062:
virtio_blk: Use topology to set the stripe size/offset
r246307:
virtio_blk: Correct stripe offset calculation
r246063:
virtio_blk: Add support for write cache enable feature
r246303:
virtio_blk: Expand a comment
r252529:
virtio_blk: Improve write cache handling
r252681:
virtio_blk: Remove unneeded curly braces
MFC after: 1 month
Contains projects/virtio commits:
r245709:
Each VirtIO device was scheduling its own taskqueue(9) to do the
off-level interrupt handling. ithreads(9) is the more nature way
to do this. The primary motivation for this work to better support
network multiqueue.
r245710:
virtio: Change virtqueue intr handlers to return void
r245711:
virtio_blk: Remove interrupt taskqueue
r245721:
vtnet: Remove interrupt taskqueue
r245722:
virtio_scsi: Remove interrupt taskqueue
r245747:
vtnet: Remove taskqueue fields missed in r245721
MFC after: 1 month
