that looks for interface skips interfaces that are not UP. We need to call
dhclient-script PREINIT before we call discover_interfaces(), so the script has
a chance to bring the interface UP.
Reported by: alfred
pmap_remove_all()
This flag should already be cleared by pmap_nuke_pv()
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
When doing pmap_enter_locked(), enable write permission only when access
type indicates attempt to write. Otherwise, leave the page read only but
mark it writable in pv_flags.
This will result in:
1. Marking page writable during pmap_enter() but only when ensured that it
will be written right away so that we will not get redundant permissions
fault on write attempt.
2. Keeping page read only when it is permitted to be written but there was
no actual write attempt. Hence, we will get permissions fault on write
access and mark page writable in pmap_fault_fixup() what will indicate
modification status.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
This is an AR7240 based device with an AR9285 on-board.
I've tested the initial boot and wifi support; however at the moment
the ethernet switch driver doesn't seem to be picking up carrier on the
active ethernet port. Basic flood pinging works however, so I think
we're on the right track.
Thank you to Adrian Woodley <adrian@diskworld.com.au> for purchasing me
one of these devices to bootstrap FreeBSD-HEAD on.
in the ithread code where we could lose ithread interrupts if
intr_event_schedule_thread() is called while the ithread is already
running. Effectively memory writes could be ordered incorrectly
such that the unatomic write of 0 to ithd->it_need (in ithread_loop)
could be delayed until after it was set to be triggered again by
intr_event_schedule_thread().
This was particularly a big problem for CAM because CAM optimizes
scheduling of ithreads such that it only signals camisr() when it
queues to an empty queue. This means that additional completion
events would not unstick CAM and quickly lead to a complete lockup
of the CAM stack.
To fix this use atomics in all places where ithd->it_need is accessed.
Submitted by: delphij, mav
Obtained from: TrueOS, iXsystems
MFC After: 1 week
users to set the MAC address for a device.
Clean up some obsolete code in pci_virtio_net.c
Allow an error return from a PCI device emulation's init routine
to be propagated all the way back to the top-level and result in
the process exiting.
Submitted by: Dinakar Medavaram dinnu sun at gmail (original version)
would sometimes result in a corrupted file was reported via email.
This problem appears to have been caused by r251719 (reverting
r251719 fixed the problem). Although I have not been able to
reproduce this problem, I suspect it is caused by another thread
increasing np->n_size after the mtx_unlock(&np->n_mtx) but before
the vnode_pager_setsize() call. Since the np->n_mtx mutex serializes
updates to np->n_size, doing the vnode_pager_setsize() with the
mutex locked appears to avoid the problem.
Unfortunately, vnode_pager_setsize() where the new size is smaller,
cannot be called with a mutex held.
This patch returns the semantics to be close to pre-r251719 such that the
call to the vnode_pager_setsize() is only delayed until after the mutex is
unlocked when np->n_size is shrinking. Since the file is growing
when being written, I believe this will fix the corruption.
Reported by: David G. Lawrence (dg@dglawrence.com)
Tested by: David G. Lawrence (pending, to happen soon)
Reviewed by: kib
MFC after: 1 week
Ensure that d_delmaxsize is always set, removing init to 0 which could cause
future issues if use cases change.
Allow kern.cam.da.X.delete_max (which maps to d_delmaxsize) to be increased
up to the calculated max after being reduced.
MFC after: 1 day
X-MFC-With: r249940
reset by pmap_page_init() right after being initialized in vm_page_initfake().
The statement above is with reference to the amd64 implementation of
pmap_page_init().
Fix this by calling 'pmap_page_init()' in 'vm_page_initfake()' before changing
the 'memattr'.
Reviewed by: kib
MFC after: 2 weeks
Force UMA zone to allocate service structures like slabs using own
allocator. uma_debug code performs atomic ops on uma_slab_t fields
and safety of this operation is not guaranteed for write-back caches
bit when looking up the vm_page associated with the superpage's physical
address.
If the caching attribute for the mapping is write combining or write protected
then the PG_PDE_PAT bit will be set and thus cause an 'off-by-one' error
when looking up the vm_page.
Fix this by using the PG_PS_FRAME mask to compute the physical address for
a superpage mapping instead of PG_FRAME.
This is a theoretical issue at this point since non-writeback attributes are
currently used only for fictitious mappings and fictitious mappings are not
subject to promotion.
Discussed with: alc, kib
MFC after: 2 weeks
Properly handle input lines containing NUL characters such that pgets()
accurately fills the read buffer.
Callers of pgets() still mis-process the buffer contents if the read line
contains NUL characters, but this at least makes pgets() accurate.
Make it so that 'patch < FUBAR' and 'patch -i FUBAR' operate the same.
The former makes a copy of stdin, but was not accurately putting the
content of stdin into a temp file. This lead to the undercounting
the number of lines in hunks containing NUL characters when reading
from stdin. Thus resulting in "unexpected end of file in patch" errors.
Revoke all capability rights from STDIN and allow only for write to STDOUT and
STDERR. All those descriptors are redirected to /dev/null.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Once PID is written to the pidfile, revoke all capability rights.
We just want to keep the pidfile open.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Limit routing socket so only poll(2) and read(2) are allowed (CAP_POLL_EVENT
and CAP_READ). This prevents unprivileged process from adding, removing or
modifying system routes.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
- Limit bpf descriptor in unprivileged process to CAP_POLL_EVENT, CAP_READ and
allow for SIOCGIFFLAGS, SIOCGIFMEDIA ioctls.
- While here limit bpf descriptor in privileged process to only CAP_WRITE.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Currently it was allowed to send any UDP packets from unprivileged process and
possibly any packets because /dev/bpf was open for writing.
Move sending packets to privileged process. Unprivileged process has no longer
access to not connected UDP socket and has only access to /dev/bpf in read-only
mode.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
- Add new request (IMSG_SEND_PACKET) that will be handled by privileged process.
- Add $FreeBSD$.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
The gethostname(3) function won't work in capability mode, because reading
kern.hostname sysctl is not permitted there. Cache hostname early and use
cached value later.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Make use of two fields: rfdesc and wfdesc to keep bpf descriptor open for
reading only in rfdesc and bpf descriptor open for writing only in wfdesc.
In the end they will be used by two different processes.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
but ACM formula we use have internal state (and return value) in the
[1, 0x7ffffffe] range, so our RAND_MAX (0x7fffffff) is never reached
because it is off by one, zero is not reached too.
Correct both RAND_MAX and rand(3) return value, shifting last one
to the 0 by 1 subtracted, resulting POSIXed [0, 0x7ffffffd(=new RAND_MAX)]
range.
2) Add a checks for not overflowing on too big seeds. It may happens on
the machines, where sizeof(unsigned int) > 32 bits.
Reviewed by: bde [1]
MFC after: 2 weeks
capabilities.
rwhod(8) receiver can now only receive packages, write to /var/rwho/ directory
and log to syslog.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by: Google Summer of Code 2013
Reviewed by: pjd
MFC after: 1 month
which is very bad idea. Split sending and receiving in two processes,
which fixes this problem and will help to sandbox rwhod.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by: Google Summer of Code 2013
Reviewed by: pjd
MFC after: 1 month
