use of fdt_fixup_table on PowerPC and ARM. As such we can remove it from
other architectures as it's unneeded.
Reviewed by: nwhitehorn
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5013
When processing loader.conf if console contained an entry for an unsupported
console then cons_set would return an error refusing to set any console.
This has two side effects:
1. Forth would throw a syntax error and stop processing loader.conf at that
point.
2. The value of console is ignored.
#1 Means other important loader.conf entries may not be processed, which is
clearly undesirable.
#2 Means the users preference for console aren't applied even if they did
contain valid options. Now we have support for multi boot paths from a
single image e.g. bios and efi mode the console preference needs to deal
with the need to set preference for more than one source.
Fix this by:
* Returning CMD_OK where possible from cons_set.
* Allowing set with at least one valid console to proceed.
Reviewed by: allanjude
MFC after: 1 week
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5018
idr_alloc_cyclic() in the LinuxKPI. Bump the FreeBSD version to
force recompilation of all KLDs due to IDR structure size change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
The htree dir_index is perhaps one of the most characteristic
features of the linux ext3 implementation. It was removed
in r281670, due to repeated bug reports.
Damjan Jovanic detected and fixed three bugs and did some
stress testing by building Apache OpenOffice on top of it
so it is now in good shape to bring back.
Differential Revision: https://reviews.freebsd.org/D5007
Submitted by: Damjan Jovanovic
Reviewed by: pfg
Tested by: pho
Relnotes: Yes
MFC after: 2 months (only 10.x)
EFI was mixing caching in two separate places causing issues when multiple
partitions where tested.
Eliminate this by removing fsstat and re-factoring fsread into fsread_size,
adding basic parameter validation.
Also:
* Enhance some error print outs.
* Fix compilation under UFS1_ONLY and UFS2_ONLY
* Use sizeof on vars instead of structs.
* Add basic parameter validation to fsread_size.
MFC after: 1 week
X-MFC-With: r293268
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4989
user VM spaces while servicing jobs. Update various comments and data
structures that refer to AIO daemons as threads to refer to processes
instead.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4999
In r55943, a per-process queue of pending socket AIO requests (requests
waiting for the socket to become ready) was added so that they could be
cancelled during process rundown. In r154765, the rundown code was
changed to handle jobs in this state (JOBST_JOBQSOCK) directly removing
the need for the extra queue. However, the per-process queue head and
global lock were never removed.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4997
1. vhold and zap immediately instead of postponing few lines later
2. increment numneg after new entry is added
No functional changes.
No objections: kib
Previously the code would just increment statistics while only holding a
shared lock, in effect losing updates.
Separate tracking for nchstats is removed as values can be obtained from
existing counters. Note that some fields are updated by external
consumers and are left unfixed. This should not be a serious issue as
this structure looks quite obsolete.
No strong objections: kib
a) Look for the CPL in the payload buffer instead of the descriptor.
b) Retrieve the socket associated with the tid with the inpcb lock held.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Redo LC calibration if temperature changed significantly since last
calibration.
Tested with RTL8188EU/RTL8188CUS in STA mode.
Reviewed by: kevlo
Approved by: adrian (mentor)
Obtained from: NetBSD (mostly)
Differential Revision: https://reviews.freebsd.org/D4966
- Use bitmap for debug output selection.
- Add few new messages (one for URTWN_DEBUG_BEACON
and another one for URTWN_DEBUG_INTR).
- Replace an undocumented URTWN_DEBUG definition with USB_DEBUG.
Tested with RTL8188EU / RTL8188CUS in IBSS / HOSTAP modes.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4959
(by default it was set to 9us).
Tested with RTL8188EU / RTL8188CUS in STA mode.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4535
The .text, .bss, and .data sections claimed 16-byte alignment, but were
only aligned to 8 by the linker script.
Discovered with elfcopy(1) from elftoolchain, which performs validation
absent from the binutils strip(1). ELF tool chain ticket #512.
Reported by: brooks
Reviewed by: brooks
Sponsored by: DARPA, AFRL
Add support for multiple TX and RX queue pairs. The default number of queues
is set to 4, but can be easily changed from the sysctl node hw.xn.num_queues.
Also heavily refactor netfront driver: break out a bunch of helper
functions and different structures. Use threads to handle TX and RX.
Remove some dead code and fix quite a few bugs as I go along.
Submitted by: Wei Liu <wei.liu2@citrix.com>
Reviewed by: royger
Sponsored by: Citrix Systems R&D
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4193
This is a stub for PMSU driver. Note that it cannot be used to set the
secondary core boot address during attach because drivers are attached
later than SI_SUB_CPU sysinit where cores are started.
Setting the boot address should be done manually in platform_mp_start_ap().
SMP is working fine with this commit and was enabled in Armada38x kernel
configuration file.
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4427
- Add file sys/arm/mv/armada38x/armada38x_mp.c
- Set mp_maxid and mp_ncpus based on FDT unless SCU register indicates
only one core
- Boot CPU1 in platform_mp_start_ap()
- IPI range defined
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4426
CPU1 is halted in bootROM code while it is waiting to be released.
Memory window to bootROM must be opened before booting the core.
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4425
With this commit, watchdog is supported only in case of having
"mrvl,has-wdt" property or dedicated for watchdog compatibility field
("marvell,armada-380-wdt"). There is no need to modify dts files,
as "has-wdt" property already exists.
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4424
A38X watchdog support was implemented in sys/arm/mv/timer.c driver.
It required following modifications:
- add "marvell,armada-380-wdt" compatibility, which supports only watchdog
- correct and enhance definitions related to timer control register
- unmask reset capability in RSTOUTn_MASK register
- use dedicated watchdog timer on A38X instead of second timer
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4423
New driver registers RTC as system clock. New RTC resolution is 1 sec.
Settime and gettime functions were implemented.
Reviewed by: andrew, ian
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Jan Dabros <jsd@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4421
Invalid (in FreeBSD) definition of PCI controller was
replaced with another one, working in FreeBSD environment.
PCI controller's entry had to move from its parent node
so as to be recognized properly by FBSD.
PCI was enabled in kernel configuration file.
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4379
mv_pci driver omitted slot 0, which can be valid device on Armada38x.
New mechanism detects if device is root link, basing on vendor's
and device's IDs.
It is restricted to Armada38x; on other machines, behaviour remains
the same.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4377
Add conditions corresponding to Armada38x-based SoCs,
enhancing their remap capabilities.
This is required for PCIe to work properly.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4376
