configuration stuff as well as conditional code in the IPv4 and IPv6
areas. Everything is conditional on FAST_IPSEC which is mutually
exclusive with IPSEC (KAME IPsec implmentation).
As noted previously, don't use FAST_IPSEC with INET6 at the moment.
Reviewed by: KAME, rwatson
Approved by: silence
Supported by: Vernier Networks
from the KAME IPsec implementation, but with heavy borrowing and influence
of openbsd. A key feature of this implementation is that it uses the kernel
crypto framework to do all crypto work so when h/w crypto support is present
IPsec operation is automatically accelerated. Otherwise the protocol
implementations are rather differet while the SADB and policy management
code is very similar to KAME (for the moment).
Note that this implementation is enabled with a FAST_IPSEC option. With this
you get all protocols; i.e. there is no FAST_IPSEC_ESP option.
FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a
single system.
This software is well tested with IPv4 but should be considered very
experimental (i.e. do not deploy in production environments). This software
does NOT currently support IPv6. In fact do not configure FAST_IPSEC and
INET6 in the same system.
Obtained from: KAME + openbsd
Supported by: Vernier Networks
o instead of a list of mbufs use a list of m_tag structures a la openbsd
o for netgraph et. al. extend the stock openbsd m_tag to include a 32-bit
ABI/module number cookie
o for openbsd compatibility define a well-known cookie MTAG_ABI_COMPAT and
use this in defining openbsd-compatible m_tag_find and m_tag_get routines
o rewrite KAME use of aux mbufs in terms of packet tags
o eliminate the most heavily used aux mbufs by adding an additional struct
inpcb parameter to ip_output and ip6_output to allow the IPsec code to
locate the security policy to apply to outbound packets
o bump __FreeBSD_version so code can be conditionalized
o fixup ipfilter's call to ip_output based on __FreeBSD_version
Reviewed by: julian, luigi (silent), -arch, -net, darren
Approved by: julian, silence from everyone else
Obtained from: openbsd (mostly)
MFC after: 1 month
a common lock. This change avoids a deadlock between snapshots when
separate requests cause them to deadlock checking each other for a
need to copy blocks that are close enough together that they fall
into the same indirect block. Although I had anticipated a slowdown
from contention for the single lock, my filesystem benchmarks show
no measurable change in throughput on a uniprocessor system with
three active snapshots. I conjecture that this result is because
every copy-on-write fault must check all the active snapshots, so
the process was inherently serial already. This change removes the
last of the deadlocks of which I am aware in snapshots.
Sponsored by: DARPA & NAI Labs.
of KBDIO_DEBUG which may be defined in the kernel config (as it is in NOTES).
This kind of bug is a _really_ horribly thing as we end up with one bit
of code thinking a particular structure is 136 bytes and another that it
is only 112 bytes.
Ideally all places would remember to #include the right "opt_foo.h" file,
but I think in practice file containing the variable sized struct should
#include it explicitly as a precaution.
Detected by: FlexeLint
to be administratively disabled as needed on UFS/UFS2 file systems. This
also has the effect of preventing the slightly more expensive ACL code
from running on non-ACL file systems, avoiding storage allocation for
ACLs that may be read from disk. MNT_ACLS may be set at mount-time
using mount -o acls, or implicitly by setting the FS_ACLS flag using
tunefs. On UFS1, you may also have to configure ACL store.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
automatically set MNT_MULTILABEL in the mount flags.
If FS_ACLS is set in a UFS or UFS2 superblock, automatically
set MNT_ACLS in the mount flags.
If either of these flags is set, but the appropriate kernel option
to support the features associated with the flag isn't available,
then print a warning at mount-time.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Ignoring a NULL dev in device_set_ivars() sounds wrong, KASSERT it to
non-NULL instead.
Do the same for device_get_ivars() for reasons of symmetry, though
it probably would have yielded a panic anyway, this gives more precise
diagnostics.
Absentmindedly nodded OK to by: jhb
were improperly relocated due to faulty logic in lookup_fdesc()
in elf_machdep.c. The symbol index (symidx) was bogusly used for
load modules other than the one the relocation applied to. This
resulted in bogus bindings and consequently runtime failures.
The fix is to use the symbol index only for the module being
relocated and to use the symbol name for look-ups in the
modules in the dependent list. As such, we need a function to
return the symbol name given the linker file and symbol index.
processes forked with RFTHREAD.
- Use a goto to a label for common code when exiting from fork1() in case
of an error.
- Move the RFTHREAD linkage setup code later in fork since the ppeers_lock
cannot be locked while holding a proc lock. Handle the race of a task
leader exiting and killing its peers while a peer is forking a new child.
In that case, go ahead and let the peer process proceed normally as the
parent is about to kill it. However, the task leader may have already
gone to sleep to wait for the peers to die, so the new child process may
not receive a SIGKILL from the task leader. Rather than try to destruct
the new child process, just go ahead and send it a SIGKILL directly and
add it to the p_peers list. This ensures that the task leader will wait
until both the peer process doing the fork() and the new child process
have received their KILL signals and exited.
Discussed with: truckman (earlier versions)
homerolling our own version.
- Rename the enum for memsize from ISA_IVAR_MSIZE to ISA_IVAR_MEMSIZE
since using 'MSIZE' in the macro invocation of ISA_ACCESSOR() conflicts
with the 'MSIZE' kernel option. The accessor function is still
isa_get_msize().
or fifo in UFS2, the normal ufs_strategy routine needs to be used
rather than the spec_strategy or fifo_strategy routine. Thus the
ffsext_strategy routine is interposed in the ffs_vnops vectors for
special devices and fifo's to pick off this special case. Otherwise
it simply falls through to the usual spec_strategy or fifo_strategy
routine.
Submitted by: Robert Watson <rwatson@FreeBSD.org>
Sponsored by: DARPA & NAI Labs.
It must be removed because it is done without the pipe being locked
via pipelock() and therefore is vulnerable to races with pipespace()
erroneously triggering it by temporarily zero'ing out the structure
backing the pipe.
It looks as if this assertion is not needed because all manipulation
of the data changed by pipespace() _is_ protected by pipelock().
Reported by: kris, mckusick
if failures occur, make sure that we release both the default ACL
and access ACL storage during new object creation.
Spotted by: phk and his pet flexelint
Sponsored by: DARPA, Network Associates Laboratories
be sure to exit the loop with vp == NULL if no candidates are found.
Formerly, this bug would cause the last vnode inspected to be used,
even if it was not available. The result was a panic "vn_finished_write:
neg cnt".
Sponsored by: DARPA & NAI Labs.
vclean() function (e.g., vp->v_vnlock = &vp->v_lock) rather
than requiring filesystems that use alternate locks to do so
in their vop_reclaim functions. This change is a further cleanup
of the vop_stdlock interface.
Submitted by: Poul-Henning Kamp <phk@critter.freebsd.dk>
Sponsored by: DARPA & NAI Labs.
This is most beneficial for vmware client os installs.
Reviewed by: jmallet, iedowse, tlambert2@mindspring.com
MFC After: never, -STABLE does not currently use this instruction
used by UFS to administratively enable support for extended ACLs.
While I'm here, remove MNT_MULTILABEL from the list of file system
flags we permit to be updated after the initial mount.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
FS_ACLS Administrative enable/disable of extended ACL support
FS_MULTILABEL Administrative flag to indicate to the MAC Framework
that objects in the file system are individually
labeled using extended attributes.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Reviewed by: (in principal) mckusick, phk
constants in scope, C90 does not; so, add namespace visibility
conditionals to SIG*.
2) Define the extended __sighandler_t type only in BSD namespace.
3) Don't forward declare a struct for a prototype in <signal.h>.
4) Move location of SIG_* constants.
5) Move a forward declare into the correct namespace conditional.
Requested by: bde (1)
Submitted by: bde (2 thru 5)
that use it. Specifically, vop_stdlock uses the lock pointed to by
vp->v_vnlock. By default, getnewvnode sets up vp->v_vnlock to
reference vp->v_lock. Filesystems that wish to use the default
do not need to allocate a lock at the front of their node structure
(as some still did) or do a lockinit. They can simply start using
vn_lock/VOP_UNLOCK. Filesystems that wish to manage their own locks,
but still use the vop_stdlock functions (such as nullfs) can simply
replace vp->v_vnlock with a pointer to the lock that they wish to
have used for the vnode. Such filesystems are responsible for
setting the vp->v_vnlock back to the default in their vop_reclaim
routine (e.g., vp->v_vnlock = &vp->v_lock).
In theory, this set of changes cleans up the existing filesystem
lock interface and should have no function change to the existing
locking scheme.
Sponsored by: DARPA & NAI Labs.
with the exception of indirect function calls, are assumed to be
intra load module and thus that GP will be the same. This avoids
saving, setting and restoring GP for each function call and
reduces the kernel with ~320KB. There's obviously a performance
benefit as well.
Note that since we generally don't know if calls will be intra or
inter load module when we're compiling kernel modules, -mconstant-gp
cannot be used for modules.
Fix the "@gprel relocation against dynamic symbol xxx" linker error.
Variables defined in the link unit and small enough to be put in the
short data section will have a gp-relative access sequence (using the
@gprel relocation). It is invalid to have @gprel relocations in shared
libraries, because they are to be resolved by the static linker and
not the dynamic linker. The -fpic option will cause @ltoff relocations
for @gprel relocations, but the side-effects are untested (if any).
Instead, disable/eliminate the short data section to achieve the same.
middle of this header.
o Remove unneeded conditionals to hide SIG* in the POSIX case.
(C allows implementations to define additional SIG* constants.)
o Add comments about missing features.
o Move the location of the sigset_t typedef.
o Update standards visibility conditionals.
o Fix some assumptions about what pid_t and uid_t are defined as.
o Remove size_t typedef and use __size_t in struct sigaltstack
instead.
the predicate registers. Even though the ITLB and DTLB interrupts
happen often enough, this bug didn't do much harm. The reason
is that the interrupt handlers only modify p1 and since this is
a preserved (callee-saved) register it is hardly used in code
generated by the compiler. Compilers use scratch registers by
default. Changing the interrupt handlers to use p6 (ie a scratch
register) proved that the bug was in fact fatal.
