This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to work around a bug in the EPYC 3151 BIOS
(the BIOS incorrectly marks the serial ports as
disabled)
Reviewed by: imp
MFC after: 8 weeks
Differential Revision: https://reviews.freebsd.org/D16432
Rather than hard-coding the number of CPUs to 2, look up the PVPE field
in MVPConf0, as the valid VPE numbers are from 0 to PVPE inclusive.
Submitted by: "James Clarke" <jrtc4@cam.ac.uk>
Reviewed by: br
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16644
When 2GB of memory is enabled for QEMU's Malta emulation, the physical
memory ends at an address of 2^32 - 1. This causes an integer overflow
to zero when computing the upper bound of the second phys_avail[] range.
As a result, FreeBSD/mips kernels were only using the first 256MB of
RAM and ignoring the remaining 1.75GB. To work around this, truncate
the extended memory size to 2GB minus one page for 32-bit mips kernels.
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D16027
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.
This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.
Reviewed by: kan, marcel
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9785
Convert PCIe hot plug support over to asking the firmware, if any, for
permission to use the HotPlug hardware. Implement pci_request_feature
for ACPI. All other host pci connections to allowing all valid feature
requests.
Sponsored by: Netflix
dump_avail[] is supposed to be a superset of phys_avail[] that
describes all of the memory ranges that should be included in a full
dump. minidumps don't consider pages described by dump_avail[] to be
valid and thus they are excluded via the is_dumpable() function. Most
MIPS platforms (including MALTA) set dump_avail[] to be identical to
phys_avail[]. In particular, phys_avail[] doesn't include the kernel
itself, so pages for the kernel and it's global variables are not
considered dumpable and not included in the dump. Fix this by setting
dump_avail[0] to the first memory address (0) rather than the end of
the kernel.
Several other MIPS platforms have the same bug, though I am only able
to test malta in qemu. The correct fix is to set dump_avail[] to
describe RAM and in particular to not set dump_avail[0] to the end of
the kernel (kernel_kseg0_end).
Sponsored by: DARPA / AFRL
Recource management functions in GT PCI controller driver
treated memory/IO resources as KSEG1 addresses, later during
activation these values would be increased by KSEG1 base again
rendering the address invalid and causing "bus error" trap.
Actual logic was converted to use real physical addresses,
so mapping takes place only during activation.
Submitted by: Aleksandr Rybalko <ray@FreeBSD.org>
Approved by: re (gjb)
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
Extended memory here is "physical memory above 256MB".
"memsize" in the environment only grows to 256MB; "ememsize" is the entire
memory range. Extended memory shows up at physical address 0x90000000.
This allows for malta64 VMs to be created with > 256MB RAM, all the way
up to 2GB RAM.
Tested:
* qemu-devel package; qemu-system-mips64 -m 2048 (and -m 256 to test the
no-ememsize case.)
TODO:
* testing mips32 with > 256MB RAM.
Reviewed by: imp
When the system has more than a single PCI domain, the bus numbers
are not unique, thus they cannot be used for "pci" device numbering.
Change bus numbers to -1 (i.e. to-be-determined automatically)
wherever the code did not care about domains.
Reviewed by: jhb
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3406
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
return BUS_PROBE_NOWILDCARD from their probe routines to avoid claiming
wildcard devices on their parent bus. Do a sweep through the MIPS tree.
MFC after: 2 weeks
- Route PCI interrupt for NIC
- Make "no mapping" warning more user-friendly: add device name and mention
that it's IRQ mapping
- Do not overlap ICUs' IO window with PCI devices' IO windows by starting
IO rman at offset 0x100
(Wasting 4k just as a temporary placeholder for a boot environment seems
a bit ridiculous, but hey.)
Tested: gxemul:
$ gxemul -e malta -d i:/home/adrian/work/freebsd/svn/mfsroot-rspro.img -C 4Kc /tftpboot/kernel.MALTA
most kernels before FreeBSD 9.0. Remove such modules and respective kernel
options: atadisk, ataraid, atapicd, atapifd, atapist, atapicam. Remove the
atacontrol utility and some man pages. Remove useless now options ATA_CAM.
No objections: current@, stable@
MFC after: never
required for the ABI the kernel is being built for.
XXX This is implemented in a kind-of nasty way that involves including source
files, but it's still an improvement.
o) Retire ISA_* options since they're unused and were always wrong.
implementations or no implementation on all platforms.
Some of these functions might be good ideas, but their semantics were unclear
given the lack of implementation, and an unlucky porter could be fooled into
trying to implement them or, worse, being baffled when something like
platform_trap_enter() failed to be called.
one. Interestingly, these are actually the default for quite some time
(bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
since r52045) but even recently added device drivers do this unnecessarily.
Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
Discussed with: jhb
- Also while at it, use __FBSDID.
mask bits to control register and control bits to mask register.
The former causes ICW1_RESET|ICW1_LTIM combination to be written to
control register, which on QEMU results in "level sensitive irq not
supported" error.
Submitted by: Robert Millan <rmh@debian.org>
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).
ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
symbols resolving in DDB
- When zeroing .bss/.sbss do not round end address to page boundary,
it's not neccessary and might destroy data pased by trampoline or
boot loader
r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines
Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the
BSP. Provide a missing prototype.
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines
With this commit our friend RMI will now compile. I have
not tested it and the chances of it running yet are about
ZERO.. but it will now compile. The hard part now begins,
making it run ;-)
r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines
Does 4 things:
1) Adds future RMI directories
2) Places intr_machdep.c in specfic files.arch pointing to the generic
intr_machdep.c. This allows us to have an architecture dependant
intr_machdep.c (which we will need for RMI) in the machine specific
directory
3) removes intr_machdep.c from files.mips
4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We
may need to look at finding a better place to put this. But first I want to
get this thing compiling.
r196836 | gonzo | 2009-09-04 13:02:11 -0600 (Fri, 04 Sep 2009) | 2 lines
- Clean out some XXXMIPS comments that's not relevant now
r196236 | imp | 2009-08-14 19:03:13 -0600 (Fri, 14 Aug 2009) | 3 lines
Fix style error replicated multiple times. Move to
mips_bus_space_generic for octeon obio impl.
r195496 | imp | 2009-07-09 09:04:52 -0600 (Thu, 09 Jul 2009) | 2 lines
Don't force ISA_MIPS32.
r195495 | imp | 2009-07-09 09:04:24 -0600 (Thu, 09 Jul 2009) | 4 lines
Make the yamon function pointer stuff 64-bit safe. Make the base
unsigned long, and sign extend the address of the function we're
calling through.
r195494 | imp | 2009-07-09 08:54:09 -0600 (Thu, 09 Jul 2009) | 3 lines
Addresses should be unsigned long. Make the address constants
unsigned long.
r194929 | gonzo | 2009-06-24 16:42:52 -0600 (Wed, 24 Jun 2009) | 6 lines
- Do not use hardcoded uart speed
- Call mips_timer_early_init before initializing uart in order
to make DELAY usable for ns8250 driver
Submitted by: Neelkanth Natu
r194212 | gonzo | 2009-06-14 14:54:46 -0600 (Sun, 14 Jun 2009) | 2 lines
- Fix prototypes to make compiler happy
r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
we assume that there is no FPU, because majority of SoC does
not have it.
r192788 | gonzo | 2009-05-25 22:51:56 -0600 (Mon, 25 May 2009) | 3 lines
- Provide proper pre_thread/post_ithread functions for GT PCI
controller.
r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines
- Make mips_bus_space_generic be of type bus_space_tag_t instead of
struct bus_space and update all relevant places.
r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines
Use FreeBSD/arm approach for handling bus space access: space tag is a pointer
to bus_space structure that defines access methods and hence every bus can
define own accessors. Default space is mips_bus_space_generic. It's a simple
interface to physical memory, values are read with regard to host system
byte order.
level. The distinction was artificial. Some more movement around the
deck charis is likely depending on the fallout from this one.
Paths were corrected after the svn mv. Hope that's OK.
