The only thing this tunable enables now is reporting to ACPI _OSC that
Active State Power Management and Clock Power Management Capability are
"supported" by the OS.
I've found that at least some Supermicro server boards do not allow OS
to support native PCIe hot-plug unless it reports those capabilities.
After spending significant time in PCIe specs I have found very little
motivation for that, and none of it applies to those motherboards, not
enabling ASPM themselves. So unless OS explicitly wants to save power,
I see nothing for it to do there actually.
I guess it may get sense to support ASPM when we get Thunderbolt support.
Otherwise I have no system with PCIe hot-plug where power saving matters.
It would be nice to enable this by default, but I worry that it affect
power saving of some laptops, even though I haven't noticed that myself.
PCI bus driver restores most but not all of a child PCI-PCI bridge
configuration. The bridge's I/O windows are restored by pcib driver and
that happens later in time. This can be problematic because the Command
register is restored before the windows are restored. If the firmware
programs the windows incorrectly or even does not program them at all,
then the bridge can start claiming I/O cycles that are not intended for
it. This will continue until the correct windows are restored.
I have observed this problem with a buggy BIOS where after resuming from
S3 an I/O port window of a PCI-PCI bridge was configured with zero base
and limit causing the bridge to claim 0x0 - 0xFFF port range. That
interfered with ACPI port access including ACPI PM Timer at port 0x808,
thus wreaking havoc in the time keeping.
The solution is to restore the Command register of PCI-PCI bridges after
the windows are restored in pcib driver. While here, I decided that for
other PCI device types (normal and cardbus) it's better to restore the
Command register after their BARs are restored.
To do: per jhb's suggestion, move the window handling to pci driver.
Reviewed by: imp, jhb, kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25028
The warning used to be displayed for valid VPDs about 512B or above in
size. Fix the size check and add a break while here so that the routine
stops if if detects any problem.
Tested with "pciconf -lV"
Reviewed by: kib@, jhb@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23679
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Reviewed by: imp, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23633
First reported against ESXi 5.0, PCI passthrough was not working due to
MSI-X issues. However, this issue was fixed via patch releases against
ESXi 5.5 and 6.0 in 2016. Given ESXi 5.5 and earlier have been EOL, this
patch removes the VMware MSI-X blacklist entries in the quirk table.
PR: 203874
Reviewed by: imp, jhb
MFC after: 1 month
Sponsored by: VMware
Differential Revision: https://reviews.freebsd.org/D22819
Move the locking back into the ioctl handler. This "fixes" the race where we hve
a hot plug event just after the dropping of Giant in pci_find_dbsf, assuming the
driver doesn't then call anything that drops and picks up Giant again... It's a
little safer since don't think it doesn't, but we lack the tools to know for
sure.
The /dev/pci device doesn't need GIANT, per se. However, one routine
that it calls, pci_find_dbsf implicitly does. It walks a list that can
change when PCI scans a new bus. With hotplug, this means we could
have a race with that scanning. To prevent that, take out Giant around
scanning the list.
However, given that we have places in the tree that drop giant, if
held when we call into them, the whole use of Giant to protect newbus
may be less effective that we desire, so add a comment about why we're
talking it out, and we'll address the issue when we lock newbus with
something other than Giant.
table VCTRL registers.
Unconditionally program the MSI-X vector control Mask field for MSI-X
table entries without regarud for Mask's previous value. Some devices
return all zeros on reads of the VCTRL registers, which would cause us
to skip disabling interrupts. This fixes the Samsung SM961/PM961 SSDs
which are return zero starting from offset 0x3084 within the memory
region specified by BAR0, even when they are active MSI-X vectors.
The Illumos kernel writes these unconditionally to 0 or 1. However,
section 6.8.2.9 of the PCI Local Bus 3.0 spec (dated Feb 3, 2004)
states for bits 31::01:
After reset, the state of these bits must be 0. However, for
potential future use, software must preserve the value of
these reserved bits when modifying the value of other Vector
Control bits. If software modifies the value of these reserved
bits, the result is undefined."
so we always set or clear the Mask bit, but otherwise preserves the
old value.
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=211713
Reviewed By: imp, jhb
Submitted by: Ka Ho Ng
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D20873
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
For PCI device (i.e. child of a PCI bus), reset tries FLR if
implemented and worked, and falls to power reset otherwise.
For PCIe bus (child of a PCIe bridge or root port), reset
disables PCIe link and then re-trains it, performing what is known as
link-level reset.
Reviewed by: imp (previous version), jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19646
When pci_realloc_bars was first added, the intention was to eventually
enable it by default, but it was left disabled to preserve existing
behavior. The setting is pretty conservative in that it does not
attempt to allocate resources for BARs that the BIOS/firmware leaves
disabled. It only attempts to reallocate resources for a BAR that the
firmware programmed during boot but that conflicts with another
resource during the kernel's device scan.
PR 221350 is an example of a machine that this knob fixes.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D18965
The goal of this change is to fix a problem with PCI shared interrupts
during suspend and resume.
I have observed a couple of variations of the following scenario.
Devices A and B are on the same PCI bus and share the same interrupt.
Device A's driver is suspended first and the device is powered down.
Device B generates an interrupt. Interrupt handlers of both drivers are
called. Device A's interrupt handler accesses registers of the powered
down device and gets back bogus values (I assume all 0xff). That data is
interpreted as interrupt status bits, etc. So, the interrupt handler
gets confused and may produce some noise or enter an infinite loop, etc.
This change affects only PCI devices. The pci(4) bus driver marks a
child's interrupt handler as suspended after the child's suspend method
is called and before the device is powered down. This is done only for
traditional PCI interrupts, because only they can be shared.
At the moment the change is only for x86.
Notable changes in core subsystems / interfaces:
- BUS_SUSPEND_INTR and BUS_RESUME_INTR methods are added to bus
interface along with convenience functions bus_suspend_intr and
bus_resume_intr;
- rman_set_irq_cookie and rman_get_irq_cookie functions are added to
provide a way to associate an interrupt resource with an interrupt
cookie;
- intr_event_suspend_handler and intr_event_resume_handler functions
are added to the MI interrupt handler interface.
I added two new interrupt handler flags, IH_SUSP and IH_CHANGED, to
implement the new intr_event functions. IH_SUSP marks a suspended
interrupt handler. IH_CHANGED is used to implement a barrier that
ensures that a change to the interrupt handler's state is visible
to future interrupts.
While there, I fixed some whitespace issues in comments and changed a
couple of logically boolean variables to be bool.
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D15755
Mark some buses as BUS_PASS_BUS, and some resources as BUS_PASS_RESOURCE.
This also decouples some resource attachment orderings from being races by
device tree ordering, instead relying on the bus pass to provide the
ordering.
This was originally intended to support multipass suspend/resume, but it's
also needed on PowerMacs when using fdt, as the device tree seems to get
created in reverse of the OFW tree.
Reviewed by: nwhitehorn (long ago)
Differential Revision: https://reviews.freebsd.org/D918
This is very primitive code to inspect the PCI error state and AER
error state, dump the log and clear errors, from ddb.
pci_print_faulted_dev() is made external to allow calling it from
other places. It was called from NMI handler but this chunk is not
included.
Also there is a tunable-controlled code to clear AER on device attach,
disabled by default.
All this code was useful to me when I debugged ACPI_DMAR failures (not
faults) long time ago.
Reviewed by: cem, imp (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7813
VirtIO V1 provides configuration in multiple VENDOR capabilities so this
allows all of the configuration to be discovered.
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14325
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
This allows one to specify, for example, that if there's an igb card
in bus 12, slot 0, function 0, it should be assigned igb5. If there
isn't, or there's one in a different slot, normal numbering rules
apply (hinted units are skipped). Adding 'hint.igb.5.at="pci12:0:0"'
or 'hint.igb.5.at="pci0:12:0:0"' to /boot/device.hints will accomplish
this. The double quotes are important.
The kernel only accepts the strings (in shell notation):
pci$d:$b:$s:$f
and pci$b:$s:$f
where $d is the pci domain, $b is the pci bus number, $s is the slot
number and $f is the function number. A string compare is done with
the current device to avoid another string parser in the kernel. All
numbers are unsigned decimal without leading zeros.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13546
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
According to the PCI Local Specification rev. 3.0 in case of a 64-bit
BAR both the low and the high parts of the register should be set to
~0 before attempting to read back the size.
So far I have found no single device that has problems with the
previous approach, but I think it's better to stay on the safe size.
This commit should not introduce any functional change.
MFC after: 3 weeks
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D11750
Replace archaic "busses" with modern form "buses."
Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers
No functional change.
http://grammarist.com/spelling/buses-busses/
PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon
This patch solves IRQ generation problems using the mlx5en(4) driver
with xenserver v6.5.0 in SRIOV and PCI-passthrough modes.
Until further the hw.pci.msix_rewrite_table quirk must be set manually
in /boot/loader.conf .
Reviewed by: jhb @
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
It's unsafe to update the BAR when the related EN bit is set.
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: jhb
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7914
During a bus rescan the check for an invalid vendor ID of a subfunction
used the wrong constant.
Submitted by: Dexuan Cui <decui@microsoft.com>
MFC after: 3 days
Add routines to trigger a function level reset (FLR) of a PCI-express
device via the PCI-express device control register. This also includes
support routines to wait for pending transactions to complete as well
as calculating the maximum completion timeout permitted by a device.
Change the ppt(4) driver to reset pass through devices before attaching
to a VM during startup and before detaching from a VM during shutdown.
Reviewed by: imp, wblock (earlier version)
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7751
When the I/O MMU is active in bhyve, all PCI devices need valid entries
in the DMAR context tables. The I/O MMU code does a single enumeration
of the available PCI devices during initialization to add all existing
devices to a domain representing the host. The ppt(4) driver then moves
pass through devices in and out of domains for virtual machines as needed.
However, when new PCI devices were added at runtime either via SR-IOV or
HotPlug, the I/O MMU tables were not updated.
This change adds a new set of EVENTHANDLERS that are invoked when PCI
devices are added and deleted. The I/O MMU driver in bhyve installs
handlers for these events which it uses to add and remove devices to
the "host" domain.
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7667
It seems Killer E2200/E2400 has a BIOS misconfiguration or silicon
bug which triggers DMA write errors when driver uses advertised
maximum payload size. Force the maximum payload size to 128 bytes
in DMA configuration.
This change should fix occasional DMA write errors reported on
Killer E2200.
Tested by: <psy0nic@sys-tek.org>
Add a new get_id interface to pci and pcib. This will allow us to both
detect failures, and get different PCI IDs.
For the former the interface returns an int to signal an error. The ID is
returned at a uintptr_t * argument.
For the latter there is a type argument that allows selecting the ID type.
This only specifies a single type, however a MSI type will be added
to handle the need to find the ID the hardware passes to the ARM GICv3
interrupt controller.
A follow up commit will be made to remove pci_get_rid.
Reviewed by: jhb, rstone (previous version)
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6239
detect failures, and get different PCI IDs.
For the former the interface returns an int to signal an error. The ID is
returned at a uintptr_t * argument.
For the latter there is a type argument that allows selecting the ID type.
This only specifies a single type, however a MSI type will be added
to handle the need to find the ID the hardware passes to the ARM GICv3
interrupt controller.
A follow up commit will be made to remove pci_get_rid.
Reviewed by: jhb, rstone
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6239
When devctl was added, the location string for PCI devices was changed to
use the PCI "selector" that pciconf and devctl accept. However, devd
assumes that location strings are formatted as a list of name=value pairs.
As a result, devd is no longer parsing any of the values out of PCI
device events. Restore the previous format of the PCI location strings
to restore the location and slot keywords in case any devd scripts are
using this. Add the "selector" as a new 'dbsf' location variable.
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D6253
Save the value of the IOV control and page size registers and restore
them (along with the VF count) in pci_cfg_save/pci_cfg_restore. This
ensures ARI remains enabled if a PF driver resets itself during the
PCI_IOV_INIT callback. This might also properly restore SRIOV state
across suspend/resume.
Reviewed by: rstone, vangyzen
Differential Revision: https://reviews.freebsd.org/D6192
pci_remap_msix() can be used to alter the mapping of allocated
MSI-X vectors to the MSI-X table. The code had an off by one error
when adding the IRQ resources after performing a remap. This was
fatal for any vectors in the table that used the "last" valid IRQ as
those vectors were assigned a garbage IRQ value.
MFC after: 3 days
Rescanning a PCI bus uses the following steps:
- Fetch the current set of child devices and save it in the 'devlist'
array.
- Allocate a parallel array 'unchanged' initalized with NULL pointers.
- Scan the bus checking each slot (and each function on slots with a
multifunction device).
- If a valid function is found, look for a matching device in the 'devlist'
array. If a device is found, save the pointer in the 'unchanged' array.
If a device is not found, add a new device.
- After the scan has finished, walk the 'devlist' array deleting any
devices that do not have a matching pointer in the 'unchanged' array.
- Finally, fetch an updated set of child devices and explicitly attach any
devices that are not present in the 'unchanged' array.
This builds on the previous changes to move subclass data management into
pci_alloc_devinfo(), pci_child_added(), and bus_child_deleted().
Subclasses of the PCI bus use custom rescan logic explicitly override the
rescan method to disable rescans.
Differential Revision: https://reviews.freebsd.org/D6018