The devices supported by these drivers are obsolete ISA cards, and the
sync serial protocols they supported are essentially obsolete too.
Sponsored by: The FreeBSD Foundation
Use ${SRCTOP} instead of /usr/share.
Prefer to depend on option sc_dflt_fnt instead of sc.
gc the 4 otherwise identical instances in the tree.
Platforms that don't need this won't included it.
Fix the old-style build by using ${SRCTOP} instead of a weird
construct that only works for new-style build.
Simplify the building of keymap files by using macros
Move atkbdmap.h in files.x86
This has been broken since r296899 which removed the implicit
dependency on /usr/share.
This driver allows to usage of the paravirt SCSI controller
in VMware products like ESXi. The pvscsi driver provides a
substantial performance improvement in block devices versus
the emulated mpt and mps SCSI/SAS controllers.
Error handling in this driver has not been extensively tested
yet.
Submitted by: vbhakta@vmware.com
Relnotes: yes
Sponsored by: VMware, Panzura
Differential Revision: D18613
Many arm kernel configs bogusly specified WERROR=-Werror. There's no
reason for this because the default is that and there's no reason to
override. These date from a time when we needed to add additional
warning->error suppression. They are obsolete and were cut and paste
propagated from file to file.
Comment out all the WERROR=.... lines in powerpc. They aren't bogus,
but were appropriate for the old defaults for gcc4.2.1. Now that we've
made the policy decision to suppress -Werror by default on these
platforms, it is appropriate to comment these out. People wishing to
fix these errors can still un-comment them out, or say WERROR=-Werror
on the command line.
Fix two instances (cut and paste propagation) of hard-coded -Werror
in x86 code. Replace with ${WERROR} instead. This is a no-op change
except for people who build WERROR=-Wno-error :).
This should fix tinderbox / CI breakage.
NTB Tool driver is meant for testing NTB hardware driver functionalities,
such as doorbell interrupts, link events, scratchpad registers and memory
windows. This is a port of ntb_tool driver from Linux. It has been
verified on top of AMD and PLX NTB HW drivers.
Submitted by: Arpan Palit <arpan.palit@amd.com>
Cleaned up by: mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18819
enough that unification will have to wait for the next pass.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
specific, and only builds there. Likewise the module is built there. Move it to
the x86-only files.x86.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
Apart from one MD file, ACPI is a x86 implementation, not specific to either
i386 or amd64, so put it into files.x86. Other architectures include fewer
files for the same options, so it can't move into the MI files file.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
VIA Padlock support is for VIA C3, C7 and Eden processors, which are 64bit x86
processors.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
The HPT drivers are all x86 only. Move them to files.x86. Because of the way we
run uudecode, we can use $M instead of needing entries for them in separate
files.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
Move all the identical x86 lines to files.x86. The non-identical ones should be
unified and moved as well, but that would require additional changes that would
need a more careful review and may not be MFCable, so I'll do them
separately. I'll delete the mildly snarky comment when things are unified.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
files.x86 is for the parts of the system that are common to both i386 and amd64
due too their nature. First up, to get the ball rolling, is fdc, the floppy disk
support. It works only on amd64 and i386 these days, and that's unlikely to
change.
Reviewed by: jhb, cem (earlier versrions)
Differential Revision: https://reviews.freebsd.org/D21210
It is assembled using "${CC} -x assembler-with-cpp", which by convention
(bsd.suffixes.mk) uses the .asm extension.
This is a portion of the review referenced below (D18344). That review
also renamed linux_support.s to .S, but that is a functional change
(using the compiler's integrated assembler instead of as) and will be
revisited separately.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18344
The current implementation of gzipped a.out support was based
on a very old version of InfoZIP which ships with an ancient
modified version of zlib, and was removed from the GENERIC
kernel in 1999 when we moved to an ELF world.
PR: 205822
Reviewed by: imp, kib, emaste, Yoshihiro Ota <ota at j.email.ne.jp>
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21099
This patch is the driver for NTB hardware in AMD SoCs (ported from Linux)
and enables the NTB infrastructure like Doorbells, Scratchpads and Memory
window in AMD SoC. This driver has been validated using ntb_transport and
if_ntb driver already available in FreeBSD.
Submitted by: Rajesh Kumar <rajesh1.kumar@amd.com>
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18774
The goal of this driver is consolidate information about SuperIO chips
and to provide for peaceful coexistence of drivers that need to access
SuperIO configuration registers.
While SuperIO chips can host various functions most of them are
discoverable and accessible without any knowledge of the SuperIO.
Examples are: keyboard and mouse controllers, UARTs, floppy disk
controllers. SuperIO-s also provide non-standard functions such as
GPIO, watchdog timers and hardware monitoring. Such functions do
require drivers with a knowledge of a specific SuperIO.
At this time the driver supports a number of ITE and Nuvoton (fka
Winbond) SuperIO chips.
There is a single driver for all devices. So, I have not done the usual
split between the hardware driver and the bus functionality. Although,
superio does act as a bus for devices that represent known non-standard
functions of a SuperIO chip. The bus provides enumeration of child
devices based on the hardcoded knowledge of such functions. The
knowledge as extracted from datasheets and other drivers.
As there is a single driver, I have not defined a kobj interface for it.
So, its interface is currently made of simple functions.
I think that we can the flexibility (and complications) when we actually
need it.
I am planning to convert nctgpio and wbwd to superio bus very soon.
Also, I am working on itwd driver (watchdog in ITE SuperIO-s).
Additionally, there is ithwm driver based on the reverted sensors
import, but I am not sure how to integrate it given that we still lack
any sensors interface.
Discussed with: imp, jhb
MFC after: 7 weeks
Differential Revision: https://reviews.freebsd.org/D8175
I introduced an obvious compiler error in r346282, so this change fixes
that.
Unfortunately, RANDOM_LOADABLE isn't covered by our existing tinderbox, and
it seems like there were existing latent linking problems. I believe these
were introduced on accident in r338324 during reduction of the boolean
expression(s) adjacent to randomdev.c and hash.c. It seems the
RANDOM_LOADABLE build breakage has gone unnoticed for nine months.
This change correctly annotates randomdev.c and hash.c with !random_loadable
to match the pre-r338324 logic; and additionally updates the HWRNG drivers
in MD 'files.*', which depend on random_device symbols, with
!random_loadable (it is invalid for the kernel to depend on symbols from a
module).
(The expression for both randomdev.c and hash.c was the same, prior to
r338324: "optional random random_yarrow | random !random_yarrow
!random_loadable". I.e., "random && (yarrow || !loadable)." When Yarrow
was removed ("yarrow := False"), the expression was incorrectly reduced to
"optional random" when it should have retained "random && !loadable".)
Additionally, I discovered that virtio_random was missing a MODULE_DEPEND on
random_device, which breaks kld load/link of the driver on RANDOM_LOADABLE
kernels. Address that issue as well.
PR: 238223
Reported by: Eir Nym <eirnym AT gmail.com>
Reviewed by: delphij, markm
Approved by: secteam(delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20466
code. The primary client of this is probably going to be ZFS encryption.
Reviewed by: jhb, cem
Sponsored by: iXsystems Inc, Kithrup Enterprises
Differential Revision: https://reviews.freebsd.org/D19298
is easier to configure. It is MI, unlike some of the other syscons files
already in the MI list.
Move scvtb.c similarly. It is needed whenever sc is configured, and is
more MI than most of the files already in the MI list.
This only changes the combined list for arm64 and mips. These arches
already cannot build sc or even NOTES.
Effectively all i386 kernels now have two pmaps compiled in: one
managing PAE pagetables, and another non-PAE. The implementation is
selected at cold time depending on the CPU features. The vm_paddr_t is
always 64bit now. As result, nx bit can be used on all capable CPUs.
Option PAE only affects the bus_addr_t: it is still 32bit for non-PAE
configs, for drivers compatibility. Kernel layout, esp. max kernel
address, low memory PDEs and max user address (same as trampoline
start) are now same for PAE and for non-PAE regardless of the type of
page tables used.
Non-PAE kernel (when using PAE pagetables) can handle physical memory
up to 24G now, larger memory requires re-tuning the KVA consumers and
instead the code caps the maximum at 24G. Unfortunately, a lot of
drivers do not use busdma(9) properly so by default even 4G barrier is
not easy. There are two tunables added: hw.above4g_allow and
hw.above24g_allow, the first one is kept enabled for now to evaluate
the status on HEAD, second is only for dev use.
i386 now creates three freelists if there is any memory above 4G, to
allow proper bounce pages allocation. Also, VM_KMEM_SIZE_SCALE changed
from 3 to 1.
The PAE_TABLES kernel config option is retired.
In collaboarion with: pho
Discussed with: emaste
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18894
This moves the architecture independent parts of sys/x86/acpica/srat.c
to sys/dev/acpica/acpi_pxm.c, to be used later on arm64. The function
declarations are moved to sys/dev/acpica/acpivar.h
We also need to update sys/conf/files.{i386,amd64} to use the new file.
No functional changes.
Reviewed by: markj, imp
Differential Revision: https://reviews.freebsd.org/D17941
Remove the advanssy drivers (both adv and adw). They were tagged as
gone in 12 a while qgo. The nycbug dmesg database shows this was last
seen in 6 and there were only a few adv sightings then (none for adw).
Relnotes: yes
aic was marked to be gone in 12 a while ago. Go ahead and remove it.
nycbug's dmesg database shows this was last seen in 6 and one more
time in 4.x. It never was popular, and what popularity it had was over
before the nycbug databse got going in 2004.
Relnotes: yes
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
Both the in-kernel C variant and libc asm variant have very poor performance.
The former compiles to a single byte comparison loop, which breaks down even
for small sizes. The latter uses rep cmpsq/b which turn out to have very poor
throughput and are slower than a hand-coded 32-byte comparison loop.
Depending on size this is about 3-4 times faster than the current routines.
Reviewed by: kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17328
Updates in the format described in section 9.11 of the Intel SDM can
now be applied as one of the first steps in booting the kernel. Updates
that are loaded this way are automatically re-applied upon exit from
ACPI sleep states, in contrast with the existing cpucontrol(8)-based
method. For the time being only Intel updates are supported.
Microcode update files are passed to the kernel via loader(8). The
file type must be "cpu_microcode" in order for the file to be recognized
as a candidate microcode update. Updates for multiple CPU types may be
concatenated together into a single file, in which case the kernel
will select and apply a matching update. Memory used to store the
update file will be freed back to the system once the update is applied,
so this approach will not consume more memory than required.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16370
- inline atomics in modules on i386 and amd64 (they were always
inline on other arches)
- allow modules to opt in to inlining locks by specifying
MODULE_TIED=1 in the makefile
Reviewed by: kib
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16079
Intel now provides comprehensive tables for all performance counters
and the various valid configuration permutations as text .json files.
Libpmc has been converted to use these and hwpmc_core has been greatly
simplified by moving to passthrough of the table values.
The one gotcha is that said tables don't support pentium pro and and pentium
IV. There's very few users of hwpmc on _amd64_ kernels on new hardware. It is
unlikely that anyone is doing low level optimization on 15 year old Intel
hardware. Nonetheless, if someone feels strongly enough to populate the
corresponding tables for p4 and ppro I will reinstate the files in to the
build.
Code for the K8 counters and !x86 architectures remains unchanged.
Make memmove the primary interface, but have bcopy be an alternative
entry point that jumps into memmove. This will slightly pessimize
bcopy calls, but those are about to get much rarer. Return dst always,
but it will be ignored by bcopy callers. We can remove just the alt
entry point if we ever remove bcopy entirely.
Differential Revision: https://reviews.freebsd.org/D15374
Use proper method to access userspace. For now, only the slow copyout
path is implemented.
Reported and tested by: tijl (previous version)
Sponsored by: The FreeBSD Foundation
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
The change makes the user and kernel address spaces on i386
independent, giving each almost the full 4G of usable virtual addresses
except for one PDE at top used for trampoline and per-CPU trampoline
stacks, and system structures that must be always mapped, namely IDT,
GDT, common TSS and LDT, and process-private TSS and LDT if allocated.
By using 1:1 mapping for the kernel text and data, it appeared
possible to eliminate assembler part of the locore.S which bootstraps
initial page table and KPTmap. The code is rewritten in C and moved
into the pmap_cold(). The comment in vmparam.h explains the KVA
layout.
There is no PCID mechanism available in protected mode, so each
kernel/user switch forth and back completely flushes the TLB, except
for the trampoline PTD region. The TLB invalidations for userspace
becomes trivial, because IPI handlers switch page tables. On the other
hand, context switches no longer need to reload %cr3.
copyout(9) was rewritten to use vm_fault_quick_hold(). An issue for
new copyout(9) is compatibility with wiring user buffers around sysctl
handlers. This explains two kind of locks for copyout ptes and
accounting of the vslock() calls. The vm_fault_quick_hold() AKA slow
path, is only tried after the 'fast path' failed, which temporary
changes mapping to the userspace and copies the data to/from small
per-cpu buffer in the trampoline. If a page fault occurs during the
copy, it is short-circuit by exception.s to not even reach C code.
The change was motivated by the need to implement the Meltdown
mitigation, but instead of KPTI the full split is done. The i386
architecture already shows the sizing problems, in particular, it is
impossible to link clang and lld with debugging. I expect that the
issues due to the virtual address space limits would only exaggerate
and the split gives more liveness to the platform.
Tested by: pho
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D14633
