Silence a bogus compiler warning about indexing past the end of dn_bonus.
The ZFS code ensures this is not possible but the compiler can't determine
this so added an additional check to prevent this warning.
Sponsored by: Multiplay
It hasn't been used since the AIO code was made MPSAFE 10 years ago.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4946
- Remove unneeded fstat()/lseek() calls.
- Return NULL and set errno to EINVAL on negative length.
- Fix small style problems and expand variable names.
After this change, it is possible to use this code for some irregular
files. For example, 'md5 /dev/md0' should now succeed.
Differential Revision: https://reviews.freebsd.org/D4748
Suggested by: bde
Reviewed by: bde, allanjude, delphij
This taskqueue is not used to handle bio requests. It is only used to
run aio_kick_nowait() to spin up new aio daemon processes.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D4904
problem affects revision 1xx hardware as well as later versions. Also, the
recommended workaround is to set the PDC count register for a 12-byte
transfer when the actual size is less than that, but there is no need to
extend or zero-out the data buffer, because the blklen register contains
the real transfer size and only that many bytes will be transferred.
Also add a sysctl to turn debugging printfs on or off on the fly.
linking. These are too large for a branch instruction to branch from an
earlier point in the code to somewhere later.
This will also allow these to be build with Thumb-2 when we get this
infrastructure.
Reviewed by: dim
Differential Revision: https://reviews.freebsd.org/D4855
As the in-tree GCC does not support __attribute__((ms_abi)) EFI can only
be built with Clang.
The EFI loader and boot1 validated this, but unused libefi was still built
causing issues under GCC after warnings where enabled by r293724.
Disable building all of EFI when the selected compiler is GCC.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
When a ZFS drive disappears, ZFS sends a resource.fs.zfs.removed event to
userland. A userland program like zfsd(8) can use that event, for example to
activate a hotspare. The current code contains a race condition: vdev_geom
will sent the sysevent _before_ spa.c would update the vdev's status,
causing userland processes to see pool state that does not reflect the
device removal. This change moves the sysevent to spa.c, closing the race.
Reviewed by: delphij, Sean Eric Fagan
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4902
any root mount holds. The previous one used a wrong conditional - the
"err=$?" assignment resets "$?" to 0.
Submitted by: jilles@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
canonical place, and the nit-pickers are welcome to move this
information there with a cross reference.
Differential Review: https://reviews.freebsd.org/D4860
Netflow module is supposed to store (along with fields like
gateway address and interface index) matched netmask for each record.
This (currently) requires returning individual route entries, instead
of optimized next-hop structure. Given that, use control-plane
rib_lookup_info() function to avoid accessing rtentries directly.
While rib_lookup_info() might be slower, than fibX_lookup() flavours,
it is more scalable than rtalloc1_fib(), because rtentry mutex is
not acquired.
(RFC 2385/TCP-MD5) kernel option.
If a tcpcb has TF_NOOPT flag, then tcp_addoptions() is not called,
and to.to_signature is an uninitialized stack variable. The value
is later used as write offset, which leads to writing to random
address.
Submitted by: rstone, jtl
Security: SA-16:05.tcp
and replace crcopysafe by crcopy as crcopysafe is is not intended to be
safe in a threaded environment, it drops PROC_LOCK() in while() that
can lead to unexpected results, such as overwrite kernel memory.
In my POV crcopysafe() needs special attention. For now I do not see
any problems with this function, but who knows.
Submitted by: dchagin
Found by: trinity
Security: SA-16:04.linux
The set_robust_list system call request the kernel to record the head
of the list of robust futexes owned by the calling thread. The head
argument is the list head to record.
The get_robust_list system call should return the head of the robust
list of the thread whose thread id is specified in pid argument.
The list head should be stored in the location pointed to by head
argument.
In contrast, our implemenattion of get_robust_list system call copies
the known portion of memory pointed by recorded in set_robust_list
system call pointer to the head of the robust list to the location
pointed by head argument.
So, it is possible for a local attacker to read portions of kernel
memory, which may result in a privilege escalation.
Submitted by: mjg
Security: SA-16:03.linux
The sctp6_ctlinput() function does not properly check the length of the packet
it receives from the ICMP6 input routine. This means that an attacker can craft
a packet that will cause a kernel panic.
When the kernel receives an ICMP6 error message with one of the types/codes
it handles, it calls icmp6_notify_error() to deliver it to the upper-level
protocol. icmp6_notify_error() cycles through the extension headers (if any)
to find the protocol number of the first non-extension header. It does NOT
verify the length of the non-extension header.
It passes information about the packet (including the actual packet) to the
upper-level protocol's pr_ctlinput function. In the case of SCTP for IPv6,
icmp6_notify_error() calls sctp6_ctlinput().
sctp6_ctlinput() assumes that the incoming packet contains a sufficiently-long
SCTP header and calls m_copydata() to extract a copy of that header. In turn,
m_copydata() assumes that the caller has already verified that the offset and
length parameters are correct. If they are incorrect, it will dereference a
NULL pointer and cause a kernel panic.
In short, no one is sufficiently verifying the input, and the result is a
kernel panic.
Submitted by: jtl
Security: SA-16:01.sctp
Allow user-specified warning flag overrides for specific files under
bsd.sys.mk, in the same way kern.mk does.
This will to be used by future commits.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Disable some compiler warnings for GCC (non-standard compiler) fixing
build failures introduced by r293724, which enabled WARNS in the EFI boot
code, when compiling with none standard compiler (GCC).
Raised by: ian
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
The "mcdi_err_arg" probe still reports results of failed MCDI
commands, unless the caller invoked efx_mcdi_execute_quiet().
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4919
Add support for Huntington MCDI licensing interface to common code.
Ported from Linux net driver IOCTL functions with restructuring for
initial support for V3 licensing API.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4918
Fix an explanatory comment which did not explain very well.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4916
Fix efx_vpd_hunk_next() which has -- since its inception -- failed to
correctly iterate over the tags and keywords contained in the VPD data.
Only the first tag or keyword would be returned and the next call with
*contp == 1 would walk to the end of the data and finish.
This was spotted when fixing up errors spotted by Prefast code analysis
(which neglected to set all of the out parameters in all successful cases)
Also fix efx_vpd_verify() on Siena and EF10 which (as a side effect of
correctly iterating over all the tags and keywords) was failing as it
detected that both the static VPD and dynamic VPD storage contained an
RV keyword in the VPD-R tag. This is intentional as the static VPD and
dynamic VPD are stored separately (firmware merges their contents and
computes a new RV keyword checksum for the data readable from the VPD
capability in PCIe configuration space).
Submitted by: Andrew Lee <alee at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4915
The only value which has changed is the number of rows
(ER_DZ_EVQ_TMR_REG_ROWS is 2048 vs 1024 for FR_BZ_TIMER_COMMAND_REGP0_ROWS)
but that isn't used, so this shouldn't change behaviour.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4913
tdelete() is supposed to return the address of the parent node that has
been deleted. We already keep track of this node in the loop between
lines 94-107. The GO_LEFT()/GO_RIGHT() macros are used later on as well,
so we must make sure not to change it to something else.
If the NVSP protocol version is not greater than NVSP_PROTOCOL_VERSION_2,
then the recv buffer size is 15MB, otherwise the buffer size is 16MB.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Reviewed by: royger, Dexuan Cui <decui microsoft com>, adrian
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4814
Submitted by: Howard Su <howard0su gmail com>
Reviewed by: royger, Dexuan Cui <decui microsoft com>, adrian
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4693
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: delphij, royger, adrian
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4676
We don't need them at all.
Submitted by: Dexuan Cui <decui microsoft com>
Sponsored by: Microsoft OSTC
Reviewed by: royger, adrian, delphij
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4595
This is first step to move the generic part of HV code into kernel instead
of module, so that it is possible to use hypercall to implement some other
paravirtualization code in the kernel.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: royger, delphij, adrian
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D3072
