Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
drivers into the revived sys/sparc64/pci/ofw_pci.c, previously already
serving a similar purpose. This has been done with sun4v in mind, which
explains a) the otherwise not that obvious scheme employed and b) why
reusing sys/powerpc/ofw/ofw_pci.c was even lesser an option.
- Add a workaround for QEMU once again not emulating real machines, in
this case by not providing the OFW_PCI_CS_MEM64 range. [1]
Submitted by: jhb [1]
MFC after: 1 week
so try harder to get the CDMA sync interrupt delivered and also in
a more efficient way:
- wrap the whole process of sending and receiving the CDMA sync
interrupt in a critical section so we don't get preempted,
- send the CDMA sync interrupt to the CPU that is actually waiting
for it to happen so we don't take a detour via another CPU,
- instead of waiting for up to 15 seconds for the interrupt to
trigger try the whole process for up to 15 times using a one
second timeout (the code was also changed to just ignore belated
interrupts of a previous tries should they appear).
According to testing done by Peter Jeremy with the debugging also
added as part of this commit the first two changes apparently are
sufficient to now properly get the CDMA sync interrupts delivered
at the first try though.
- Implement bus_adjust_resource() methods as far as necessary and in non-PCI
bridge drivers as far as feasible without rototilling them.
- As NEW_PCIB does a layering violation by activating resources at layers
above pci(4) without previously bubbling up their allocation there, move
the assignment of bus tags and handles from the bus_alloc_resource() to
the bus_activate_resource() methods like at least the other NEW_PCIB
enabled architectures do. This is somewhat unfortunate as previously
sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY
resources should be mapped into KVA, which is only necessary if their
going to be accessed via the pointer returned from rman_get_virtual() but
not for bus_space(9) as the later always uses physical access on sparc64.
Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver
also may deliberately not map them in if the firmware already has done so,
possibly in a special way. So in order to still allow a driver to decide
whether a SYS_RES_MEMORY resource should be mapped into KVA we let it
indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as
actually documented in the bus_space(9) page. This is implemented by
allocating a separate bus tag per SYS_RES_MEMORY resource and passing the
resource via the previously unused bus tag cookie so we later on can call
rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now
also allows to actually indicate that a SYS_RES_MEMORY resource should be
mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and
BUS_SPACE_MAP_READONLY respectively.
- Do some minor cleanup like taking advantage of rman_init_from_resource(),
factor out the common part of bus tag allocation into a newly added
sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace
some homegrown versions with the generic counterparts etc.
- While at it, let apb_attach() (which can't use the generic NEW_PCIB code
as APB bridges just don't have the base and limit registers implemented)
regarding the config space registers cached in pcib_softc and the SYSCTL
reporting nodes set up.
register changes when compiled with SCHIZO_DEBUG and take advantage
of them.
- Add support for the XMITS Fireplane/Safari to PCI-X bridges. I tought
I'd need this for a Sun Fire 3800, which then turned out to not being
equipped with such a bridge though. The support for these should be
complete but given that it hasn't actually been tested probing is
disabled for now.
This required a way to alter the XMITS configuration in case a PCI-X
device is found further down the device tree so the sparc64 specific
ofw_pci kobj was revived with a ofw_pci_setup_device method, which is
called by the ofw_pcibus code for every device added.
- A closer inspection of the OpenSolaris code indicates that consistent
DMA flushing/syncing as well as the block store workaround should be
applied with every BUS_DMASYNC_POSTREAD instead of in a wrapper around
interrupt handlers for devices behind PCI-PCI bridges only as suggested
by the documentation (code for the latter actually exists in OpenSolaris
but is disabled by default), which also makes more sense.
- Add a workaround for Casinni/Skyhawk combinations. Chances are that
this solves the crashes seen when using the the on-board Casinni NICs
of Sun Fire V480 equipped with centerplanes other than 501-6780 or
501-6790. This also takes advantage of the ofw_pci_setup_device method.
- Mark some unused parameters as such.
implementation.
- Revert the Sun Fire V890 WAR of r205254. Instead let schizo_pci_bus()
only panic in case of fatal errors as the interrupt triggered by the
error the firmware of these and also Sun Fire 280R with version 7
Schizo caused may happen as late as using the HBA and not only prior
to touching the PCI bus (in the former case the actual error still is
fatal but we clear it before touching the PCI bus).
While at it count and export non-fatal error interrupts via sysctl(9).
- Remove unnecessary locking from schizo_ue().
provides no ino-bitmap properties so forge them using the default set
of controller interrupts and let schizo_setup_intr() take care of the
children, hoping for non-fancy routing.
- Add quirk handling for Sun Fire V890. When booting these machines from
disk a Schizo comes up with PCI error residing which triggers as soon
as we register schizo_pci_bus() even when clearing it from all involved
registers (it's no longer indicated once we're in schizo_pci_bus()
though). Thus make PCI bus errors non-fatal until we actually touch the
bus. With this change schizo_pci_bus() typically triggers once during
attach in this case. Obviously this approach isn't exactly race free
but it's about the best we can do about this problem as we're not
guaranteed that the interrupt will actually trigger on V890 either, as
it certainly doesn't when for example netbooting them.
work.
- Sanity check the parameters passed to the implementations of the
pcib_{read,write}_config() methods. Using illegal values can cause
no real harm but it doesn't hurt to avoid unnecessary data error
traps requiring to flush and re-enable the level 1 caches.
and XMITS has to be basically done in the same manner as for
the Sabres, i.e. only for devices behind PCI-PCI-bridges and
after a PIO read on the far side of the farest PCI-PCI-bridge.
Given that the Tomatillo documentation mentions no difference
to the Schizo bridges in this regard and this is also still
part of the procedure described Schizo documentation this
seems about right so adjust accordingly (the unconditional
CDMA flushing/syncing previously done was based on how Linux
behaves).
- Implement CDMA flushing/syncing for Schizo version >= 5,
which requires the workaround described in Schizo Errata I-23.
According to Schizo Errata I-13 it's just unusable with
version < 5 though. [1]
- Don't register the Schizo streaming buffer for now until it's
usage is sorted out according to the erratas.
- Register our interrupt filters with the revived INTR_FAST so
they these interrupts can even interrupt filters of device
drivers as necessary.
- Remove the comment regarding lack of newbus'ified bus_dma(9)
as being able to associate a DMA tag with a device would
allow to implement CDMA flushing/syncing in bus_dmamap_sync(9)
but that would totally kill performance. Given that for devices
not behind a PCI-PCI bridge the host-to-PCI bridges also only
do CDMA flushing/syncing based on interrupts there's no
additional disadvantage for polling(4) callbacks in the case
schizo(4) has to do the CDMA flushing/syncing but rather a
general problem.
Reported by: Michael Moll [1]
JBus to PCI 2.2 bridges. In theory, this driver should also handle
`XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access
to such hardware, support for these hasn't be fleshed out, yet.
