It is only used in hv_netvsc_drv_freebsd.c; and rename it to hn_tx_done()
mainly to reserve "xmit" for ifnet.if_transmit implement.
While I'm here, remove unapplied comment.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5345
Preamble to implement the ifnet.if_transmit method.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5344
- Add URTWN_WITHOUT_UCODE option (will disable any firmware specific code
when set).
- Do not exclude the driver from build when MK_SOURCELESS_UCODE is set
(URTWN_WITHOUT_UCODE will be enforced unconditionally).
- Do not abort initialization when firmware cannot be loaded;
behave like the URTWN_WITHOUT_UCODE option was set.
- Drop some unused variables from urtwn_softc structure.
Tested with RTL8188EU and RTL8188CUS in HOSTAP and STA modes.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4849
acpi_GetInteger() execution. Intel DMAR interrupt remapping code
needs to know UID of the HPET to properly route the FSB interrupts
from the HPET, even when interrupt remapping is disabled, and the code
is executed under some non-sleepable mutexes.
Cache HPET UIDs in the device softc at the attach time and provide
lock-less method to get UID, use the method from the dmar hpet
handling code instead of calling GetInteger().
Reported and tested by: Larry Rosenman <ler@lerctr.org>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Extract common code from PowerPC's ofw_pci
Import portions of the PowerPC OF PCI implementation into
new file "ofw_pci.c", common for other platforms. The files ofw_pci.c and
ofw_pci.h from sys/powerpc/ofw no longer exist. All required declarations
are moved to sys/dev/ofw/ofw_pci.h.
This creates a new ofw_pci_write_ivar() function and modifies
ofw_pci_nranges(), ofw_pci_read_ivar(), ofw_pci_route_interrupt()
methods.
Most functions contain existing ppc implementations in the majority
unchanged. Now there is no need to have multiple identical copies
of methods for various architectures.
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Annapurna Labs
Reviewed by: jhibbits, mmel
Differential Revision: https://reviews.freebsd.org/D4879
This needs to return to the drawing board as it breaks both
PowerPC and Sparc64 build.
Pointed out by: jhibbits
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
The m_collapse() call would fail when transmitting medium-sized packets
when the interface mtu was set to 9000, so revert back to m_defrag(),
which does not fail.
Differential Revision: https://reviews.freebsd.org/D5207
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
- I40E_PFINT_DYN_CTLN needs to be cleared, and not have a queue index
written to it.
- The interrupt linked list for each queue is changed to only include
the queue's Rx and Tx queues.
Differential Revision: https://reviews.freebsd.org/D5206
Reviewed by: sbruno
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
- Change tc_mapping field to assign 64 queues instead of 16 to the PF's VSI;
add comments to describe how this is done.
- Set hash lut size to 512 when setting filter control; the lut size defaults
to 128 if this isn't set.
Differential Revision: https://reviews.freebsd.org/D5203
Reviewed by: gallatin
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
This adopts the same change as r291936 for UFS.
Directly clear IN_ACCESS or IN_UPDATE when user supplied the time, and
copy the value into the inode.
This keeps the behaviour cleaner and is consistent with UFS.
Reviewed by: bde
MFC after: 1 month (only 10)
FDT platform code to detect when we are booting on one of these SoCs. The
driver changes will be added shortly.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5338
or pte-v6.h in files which needs it.
There are quite internal definitions in pte-v4.h and pte-v6.h headers
specific for corresponding pmap implementation. These headers should be
included only in very few files and an intention is to not hide for
which implementation such files are.
Further, sys/arm/arm/elf_trampoline.c is an example of file which
uses armv4 like pmap implementation for both armv4 and armv6 platforms.
This is another reason why pte.h which includes specific header
according to __ARM_ARCH is not created.
Create new pmap.h which includes specific header according to
__ARM_ARCH.
Note that <machine/pmap.h> is included from <vm/pmap.h> so one common
<machine/pmap.h> must exist.
- Add definitions for Timing Advertisement and Control Wrapper frames.
- Refresh ieee80211_mgt_subtype_name and ieee80211_ctl_subtype_name
arrays.
- Count Timing Advertisement frames as discarded management frames in all
modes.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5331
Tested on Windows Server 2012.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5317
It will be used to help tracking host side transmission ring selection
issue; and it will be turned on by default, once we have concrete result.
Reviewed by: adrian, Jun Su <junsu microsoft com>
Approved by: adrian (mento)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5316
r274560 modified kqueue_register() to only test the event condition if the
corresponding knote is not disabled. However, this check takes place before
the EV_ENABLE flag is used to clear the KN_DISABLED flag on the knote, so
enabling a previously-disabled kevent would not result in a notification for
a triggered event. This change fixes the problem by testing for EV_ENABLED
before possibly checking the event condition.
This change also updates a kqueue regression test to exercise this case.
PR: 206368
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5307
This will speed up some tree-walks with FAST_DEPEND which otherwise
would include length(SRCS) .depend files.
This also uses a trick suggested by sjg@ to still read them in when
specifying _V_READ_DEPEND=1 in the env/make args.
Sponsored by: EMC / Isilon Storage Division
the if statement it pairs with). While not an error today, a careless
edit in the future could cause problems (though given the nature of
this specific code, the problems quite likely would be some variation
of "most direct access SCSI storage devices won't attach," which is
unlikely to go unnoticed).
PVS-Studio: V705
Import portions of the PowerPC OF PCI implementation into
new file "ofw_pci.c", common for other platforms. The files ofw_pci.c and
ofw_pci.h from sys/powerpc/ofw no longer exist. All required declarations
are moved to sys/dev/ofw/ofw_pci.h.
This creates a new ofw_pci_write_ivar() function and modifies
ofw_pci_nranges(), ofw_pci_read_ivar(), ofw_pci_route_interrupt() methods.
Most functions contain existing ppc implementations in the majority
unchanged. Now there is no need to have multiple identical copies
of methods for various architectures.
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Annapurna Labs
Reviewed by: jhibbits, mmel
Differential Revision: https://reviews.freebsd.org/D4879
Provide bus_get_bus_tag() for sparc64, powerpc, arm, arm64 and mips
nexus and its children in order to return a platform specific default tag.
This is required to ensure generic correctness of the bus_space tag.
It is especially needed for arches where child bus tag does not match
the parent bus tag. This solves the problem with ppc architecture
where the PCI bus tag differs from parent bus tag which is big-endian.
This commit is a part of the following patch:
https://reviews.freebsd.org/D4879
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Annapurna Labs
Reviewed by: jhibbits, mmel
Differential Revision: https://reviews.freebsd.org/D4879
Resource list for devices that are not ofwbus descendants, but
got to ofwbus method via bus_generic_release_resource() call chain,
cannot be found using BUS_GET_RESOURCE_LIST() used by ofwbus.
In that case, changing device's resource list should be avoided
(will not contain resource list prepared by ofw or simplebus).
Pointy-hat to: zbb
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5304
So one spinlock is avoided, which would be potentially dangerous for
virtual machine, if the spinlock holder was scheduled out by the host,
as noted by royger.
Old spinlock based txdesc list is still kept around, so we could have
a safe fallback.
No performance regression nor improvement is observed.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5290
This paves the way for upcoming vRSS stuffs and eases more code cleanup.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5283
Performance stays same; so no need to use fast taskqueue here.
Suggested by: royger
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5282
This also eases experiment on the non-fast taskqueue.
Reviewed by: adrian, Jun Su <junsu microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5276
This paves the way for upcoming vRSS stuffs and eases more code cleanup.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5275
And use SYSCTL+CTLFLAG_RDTUN for them.
Suggested by: adrian
Reviewed by: adrian, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5274
This one gives the best performance so far.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5273
It is off by default. This eases further experimenting on this driver.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5272
Set TCP ACK append limit to 1, i.e. aggregate 2 ACKs at most. Aggregating
anything more than 2 hurts TCP sending performance in hyperv. This
significantly improves the TCP sending performance when the number of
concurrent connetion is low (2~8). And it greatly stabilizes the TCP
sending performance in other cases.
Set TCP data segments aggregation length limit to 37500. Without this
limitation, hn(4) could aggregate ~45 TCP data segments for each
connection (even at 64 or more connections) before dispatching them to
socket code; large aggregation slows down ACK sending and eventually
hurts/destabilizes TCP reception performance. This setting stabilizes
and improves TCP reception performance for >4 concurrent connections
significantly.
Make them sysctls so they could be adjusted.
Reviewed by: adrian, gallatin (previous version), hselasky (previous version)
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5185
ACK aggregation limit is append count based, while the TCP data segment
aggregation limit is length based. Unless the network driver sets these
two limits, it's an NO-OP.
Reviewed by: adrian, gallatin (previous version), hselasky (previous version)
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5185
unlinked. Otherwise the vnode stays cached, causing leak. This is
similar to r292961 for regular files.
Reported and tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
numbers range.
This effectively skips indirect and extdata blocks on the buffer
queue. Since their logical block numbers are negative, bnoreuselist()
could loop infinitely.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
configuration from the FDT data, then set the pins into the requested
state. As part of this the gpio controller now reports the correct number
of pins instead of returning the number of bank * 32.
To allow for a future consolidated kernel we add the SOC_ALLWINNER_A10 and
SOC_ALLWINNER_A20 kernel options. These need to be set as appropriate for
the SoC the kernel will boot on.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5177
for all struct bio you get back from g_{new,alloc}_bio. Temporary
bios that you create on the stack or elsewhere should use this before
first use of the bio, and between uses of the bio. At the moment, it
is nothing more than a wrapper around bzero, but that may change in
the future. The wrapper also removes one place where we encode the
size of struct bio in the KBI.
are not utilized there. Only domain #0 is used and there is no reference
to it in the whole pmap-v6.c. Thus initialize domain access register in
locore-v6.c without reference too.
Before this change all mappings done by this function were executable
as pte entries have NOT EXECUTABLE bit.
The function is used only for static device mappings at present. Thus
this is also a fix as DEVICE memory should not be mapped as executable.
struct socket. When sockbuf.h was moved out of socketvar.h, the locking
key was no longer nearby. Instead, add a new key for sockbuf and use
a single item for the socket buffer lock instead of separate entries for
receive vs send buffers.
Reviewed by: adrian
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4901
will allow for code that uses the old fdt_get_range and fdt_regsize
functions to find a range, map it, access, then unmap to replace this, up
to and including the map, with a call to OF_decode_addr.
As this function should only be used in the early boot code the unmap is
mostly do document we no longer need the mapping as it's a no-op, at least
on arm.
Reviewed by: jhibbits
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5258
am335x_prcm driver which uses it. Used BUS_PASS_BUS is a quick pick
for now and may be revised when other drivers start using multipass
feature.
This is needed after an update of Linux dts files done in r295436.
(1) The channel mask is get from "brcm,dma-channel-mask" property of
dma node, and if not provided, from "broadcom,channels" property.
(2) Consequently, sdhci driver does not allocate any specific channel.
(3) Use CS_RESET bit for initial channel reset.
Differential Revision: https://reviews.freebsd.org/D4303
A10/A20 SoC. Based loosely on the submitters NetBSD driver, tested on
Cubieboard 2. Playback and capture are supported.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5202
Some chip revisions don't have their external PCIe buses
behind the internal bridge. Add support for FDT-configurable
PEMs but keep ability for PCIe enumeration.
Reviewed by: andrew, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5285
dts files. It may be removed once it will be fixed upstream.
This is done just to supresses a warning during dtb evaluation as
there is no elm driver in tree at present.
least the audio codec driver currently in review.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5050
with this and an Allwinner SoC to power off.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4954
Marvell twsi part, however uses different register locations, as such split
the existing driver into Marvell and Allwinner attachments.
While here clean a few style issues.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4846
This patch allows the newly imported INTRNG code to be built without necessarily
having FDT support in the kernel. This may be useful for some MIPS platforms
that wish to move to INTRNG, but not to FDT at the same time.
Basically all the code is already within ifdef's where FDT is concerned,
it's just the headers that aren't.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Differential Revision: https://reviews.freebsd.org/D5249
This patch comes from Dave Jiang's Linux tree, davejiang/ntb. It hasn't
been accepted into Linus' tree, so I do not have an authoritative SHA1
to point at. Original commit log:
=====================================================================
A hardware errata causes the NTB to hang when heavy bi-directional
traffic in addition to the usage of BAR0/1 (where the registers reside,
including the doorbell registers to trigger interrupts).
This workaround is only available on Haswell and Broadwell platform.
The workaround is to enable split BAR in the BIOS to allow the 64bit
BAR4 to be split into two 32bit BAR4 and BAR5. The BAR4 shall be pointed
to LAPIC region of the remote host. We will bypass the db mechanism and
directly trigger the MSIX interrupts. The offsets and vectors are
exchanged during transport scratch pad negotiation. The scratch pads are
now overloaded in order to allow the exchange of the information. This
gets around using the doorbell and prevents the lockup with additional
pcode changes in BIOS.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
=====================================================================
Notable changes in the FreeBSD version of this patch:
* The MSIX BAR is configurable, like hw.ntb.b2b_mw_idx (msix_mw_idx).
The Linux version of the patch only uses BAR4.
* MSIX negotiation aborts if the link goes down.
Obtained from: Linux (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
Sync with r84642 from UFS:
The panics are inappropriate because the IN_RENAME flag only fixes a
few of the huge number of race conditions that can result in the
source path becoming invalid even prior to the VOP_RENAME() call.
Found accidentally while checking an issue from PVS Static Analysis.
MFC after: 3 days
The I/OAT HW reset process may sleep, so it is invalid to perform a
channel reset from the software interrupt thread.
Sponsored by: EMC / Isilon Storage Division
Cleanup some checks for NULL. Most of these were always unnecessary and
starting with r294954 brelse() doesn't need any NULL checks at all.
For now keep the checks somewhat consistent with NetBSD in case we want to
merge the cleanups to older versions.
It is otherwise left dangling, and callers that request cookies always free
the cookie buffer, even when VOP_READDIR(9) returns an error. This results
in a double free if tmpfs_readdir() returns an error to the NFS server or
the Linux getdents(2) emulation code.
Reported by: pho
MFC after: 1 week
Security: double free of malloc(9)-backed memory
Sponsored by: EMC / Isilon Storage Division
values.
If switching from a thread that used floating-point registers to a thread
that is still running, but holding the blocked_lock lock we would switch
the curthread to the new (running) thread, then call critical_enter. This
will non-atomically increment td_critnest, and later call critical_exit to
non-atomically decrement this value.
This can happen at the same time as the new thread is still running on the
old core, also calling these functions. In this case there will be a race
between these non-atomic operations. This can be an issue as we could loose
one of these operations leading to the value to not return to zero.
If, later on, we then hit a data abort we check if the td_critnest is zero.
If this check fails we will panic the kernel.
This has been observed when running pcmstat on a Cavium ThunderX. The pcm
thread will use the blocked_lock lock and there is a high chance userspace
will use the floating-point registers. When, later on, pmcstat triggers a
data abort we will hit this panic.
The fix is to update these values after storing the floating-point state.
This means we use the correct curthread while storing the state so it will
not be an issue that the changes to td_critnest are non-atomic.
Sponsored by: ABT Systems Ltd
ucontext_t available. Our code even has XXX comment about this.
Add a bit of compliance by moving struct __ucontext definition into
sys/_ucontext.h and including it into signal.h and sys/ucontext.h.
Several machine/ucontext.h headers were changed to use namespace-safe
types (like uint64_t->__uint64_t) to not depend on sys/types.h.
struct __stack_t from sys/signal.h is made always visible in private
namespace to satisfy sys/_ucontext.h requirements.
Apparently mips _types.h pollutes global namespace with f_register_t
type definition. This commit does not try to fix the issue.
PR: 207079
Reported and tested by: Ting-Wei Lan <lantw44@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
supported, use full-width aliases MSRs for writes. This fixes the
"[pmc,X] negative increment" assertion on the context switch when
clipped counter value is sign-extended.
Add definitions for the MSR IA32_PERF_CAPABILITIES needed to detect
the feature.
PR: 207068
Submitted by: joss.upton@yahoo.com
MFC after: 2 weeks
mbuf(9) manipulation functions into uipc_mbuf.c. This looks like
the initial intent, but had diffused in the last decade.
o Gather all declarations in mbuf.h in one place and sort them.
o Uninline m_clget() and m_cljget().
There are no functional changes in this patch.
The patch comes from a larger version, where all mbuf(9) allocation was
uninlined, which allowed to make mbuf(9) UMA zones private to kern_mbuf.c.
The performance impact of the total uninlining is still unclear, so we
are holding on now with larger version.
Together with: melifaro, olivier
nvme(4) issues a SET_NUM_QUEUES command during device
initialization to ensure enough I/O queues exists for each
of the MSI-X vectors we have allocated. The SET_NUM_QUEUES
command is then issued again during nvme_ctrlr_start(), to
ensure that is properly set after any controller reset.
At least one NVMe drive exists which fails this second
SET_NUM_QUEUES command during device initialization. So
change nvme_ctrlr_start() to only issue its SET_NUM_QUEUES
command when it is coming out of a reset - avoiding the
duplicate SET_NUM_QUEUES during device initialization.
Reported by: gallatin
MFC after: 3 days
Sponsored by: Intel
Fix a panic that occurs when a vnet interface is unavailable at the time the
vnet jail referencing said interface is stopped.
Sponsored by: FIS Global, Inc.
o Add kernel configuration for QEMU.
Both SPIKE and QEMU kernel configs are temporary (until
we will be able to obtain DTB from loader).
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Summary:
The revised Book-E spec, adding the specification for the MMUv2 and e6500,
includes a hardware PTE layout for indirect page tables. In order to support
this in the future, migrate the PTE format to match the MMUv2 hardware PTE
format.
Test Plan: Boot tested on a P5020 board. Booted to multiuser mode.
Differential Revision: https://reviews.freebsd.org/D5224
- Add MOVI command and routine for the LPI migration
- Allow to search for the ITS device descriptor using
not only devID but also LPI number.
- Bind SPIs in the Distributor
- Don't bind its_dev to collection. Keep track of the collection
IDs for each LPI.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5231
- Change locks' names to be more suitable
- Don't use blocking mutex. Lock only basic operations such
as lists or bitmaps modifications.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5230
This should be done by routing all interrupts to CPU0,
different assignment will be induced by either interrupts
shuffling or bus_bind_intr().
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5229
pmc_hook() was called only in case of the stray interrupt but should
rather be called on each interrupt. Move in to the arm_cpu_intr()
handler, out of the critical section too.
Reviewed by: br
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5161
It can be used to bind specific interrupt to a particular CPU.
Requires PIC support for interrupts binding.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5122
Separate interrupt descriptors lookup from allocation. It was possible
to perform config on non-existing interrupt simply by allocating spurious
descriptor.
Must lock the interrupt descriptors table lookup to avoid mismatches.
This ought to prevent trouble while setting up new interrupt
and dispatching existing one.
Use spin mutex rather than sleep mutex. This is mainly due to lock in
arm_dispatch_intr.
This should be eventually changed to a lock-less solution without
walking through a linked list on each interrupt.
Reviewed by: andrew, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5121
xn_ifp is allocated in create_netdev with if_alloc(IFT_ETHER).
According to the current arrangement it can't be NULL.
Coverity ID: 1349805
Submitted by: Wei Liu <wei.liu2@citrix.com>
Reviewed by: royger
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D5252
The variable error is assigned to 0 before entering the switch.
Assigning error to 0 before break pointless rewrites the real error
value that should be returned.
Coverity ID: 1304974
Submitted by: Wei Liu <wei.liu2@citrix.com>
Reviewed by: royger
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D5250
This fixes operation in QEMU and saves some booting time as well.
Pointed out by: Sagar Karandikar <skarandikar@berkeley.edu>
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
the sign bit doesn't cause an overflow. The overflow manifests itself
as a sorting index wrap around in the middle of the sorted array,
which is not a problem for the LRO code, but might be a problem for
the logic inside qsort().
Reviewed by: gnn @
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D5239
