Commit Graph

160 Commits

Author SHA1 Message Date
Pawel Biernacki
7029da5c36 Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE.  All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT

Approved by:	kib (mentor, blanket)
Commented by:	kib, gallatin, melifaro
Differential Revision:	https://reviews.freebsd.org/D23718
2020-02-26 14:26:36 +00:00
Warner Losh
f86e60008b Regularize my copyright notice
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
  All Rights Reserved on same line as other copyright holders (but not
  me). Other such holders are also listed last where it's clear.
2019-12-04 16:56:11 +00:00
Conrad Meyer
e2e050c8ef Extract eventfilter declarations to sys/_eventfilter.h
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.

EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).

As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions.  The remainder of the patch addresses
adding appropriate includes to fix those files.

LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).

No functional change (intended).  Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed.  __FreeBSD_version has been bumped.
2019-05-20 00:38:23 +00:00
Warner Losh
8590b14e9d Remove a few stray "All Rights Reserved." declarations on stuff I've
written.
2019-02-05 21:28:29 +00:00
Warner Losh
4e96c99bdf Push down Giant one layer. In the days of yore, back when Penitums
were the new kids on the block and F00F hacks were all the rage, one
needed to take out Giant to do anything moderately complicated with
the VM, mappings and such. So the pccard / cardbus code held Giant for
the entire insertion or removal process.

Today, the VM is MP safe. The lock is only needed for dealing with
newbus things. Move locking and unlocking Giant to be only around
adding and probing devices in pccard and cardbus.
2018-03-20 22:01:18 +00:00
Warner Losh
d6f64df912 1k objects on the stack are a bad idea. While it's likely safe in this
context, it's also safe to allocate the memory and free it instead.

Noticed by: Eugene Grosbein's script
2017-12-12 20:22:09 +00:00
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
John Baldwin
e240255ffc Add a bus_null_rescan() method that always fails with an error.
Use this in place of kobj_error_method to disable BUS_RESCAN() on
PCI drivers that do not use the "standard" scanning algorithm.
2016-04-27 17:49:42 +00:00
John Baldwin
3d0338a092 Implement a PCI bus rescan method.
Rescanning a PCI bus uses the following steps:
- Fetch the current set of child devices and save it in the 'devlist'
  array.
- Allocate a parallel array 'unchanged' initalized with NULL pointers.
- Scan the bus checking each slot (and each function on slots with a
  multifunction device).
- If a valid function is found, look for a matching device in the 'devlist'
  array.  If a device is found, save the pointer in the 'unchanged' array.
  If a device is not found, add a new device.
- After the scan has finished, walk the 'devlist' array deleting any
  devices that do not have a matching pointer in the 'unchanged' array.
- Finally, fetch an updated set of child devices and explicitly attach any
  devices that are not present in the 'unchanged' array.

This builds on the previous changes to move subclass data management into
pci_alloc_devinfo(), pci_child_added(), and bus_child_deleted().

Subclasses of the PCI bus use custom rescan logic explicitly override the
rescan method to disable rescans.

Differential Revision:	https://reviews.freebsd.org/D6018
2016-04-27 16:31:12 +00:00
Pedro F. Giffuni
73a1170a8c sys/dev: use our nitems() macro when it is avaliable through param.h.
No functional change, only trivial cases are done in this sweep,
Drivers that can get further enhancements will be done independently.

Discussed in:	freebsd-current
2016-04-19 23:37:24 +00:00
John Baldwin
6cd99ae86d Add a new PCI bus interface method to alloc the ivars (dinfo) for a device.
The ACPI and OFW PCI bus drivers as well as CardBus override this to
allocate the larger ivars to hold additional info beyond the stock PCI ivars.

This removes the need to pass the size to functions like pci_add_iov_child()
and pci_read_device() simplifying IOV and bus rescanning implementations.

As a result of this and earlier changes, the ACPI PCI bus driver no longer
needs its own device_attach and pci_create_iov_child methods but can use
the methods in the stock PCI bus driver instead.

Differential Revision:	https://reviews.freebsd.org/D5891
2016-04-15 03:42:12 +00:00
John Baldwin
496dfa89a6 Convert pci_delete_child() to a bus_child_deleted() method.
Instead of providing a wrapper around device_delete_child() that the PCI
bus and child bus drivers must call explicitly, move the bulk of the logic
from pci_delete_child() into a bus_child_deleted() method
(pci_child_deleted()).  This allows PCI devices to be safely deleted via
device_delete_child().
- Add a bus_child_deleted method to the ACPI PCI bus which clears the
  device_t associated with the corresponding ACPI handle in addition to
  the normal PCI bus cleanup.
- Change cardbus_detach_card to call device_delete_children() and move
  CardBus-specific delete logic into a new cardbus_child_deleted() method.
- Use device_delete_child() instead of pci_delete_child() in the SRIOV code.
- Add a bus_child_deleted method to the OpenFirmware PCI bus drivers which
  frees the OpenFirmware device info for each PCI device.

Reviewed by:	imp
Tested on:	amd64 (CardBus and PCI-e hotplug)
Differential Revision:	https://reviews.freebsd.org/D5831
2016-04-06 04:10:22 +00:00
Justin Hibbits
da1b038af9 Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit.  This extends rman's resources to uintmax_t.  With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t?  Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures.  64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead.  That being said, uintmax_t was chosen for source
clarity.  If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros.  Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros.  Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes:	Yes
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00
Warner Losh
8e5f761422 On my Lenovo T400, a Atheros 2413 has a problem powering up
sometimes. It will power up wrong and identify itself badly:

cardbus0: <network, ethernet> at device 0.0 (no driver attached)
cardbus0: <simple comms, UART> at device 0.1 (no driver attached)
cardbus0: <old, non-VGA display device> at device 0.2 (no driver attached)
cardbus0: <old, non-VGA display device> at device 0.3 (no driver attached)
cardbus0: <old, non-VGA display device> at device 0.4 (no driver attached)
cardbus0: <old, non-VGA display device> at device 0.5 (no driver attached)
cardbus0: <old, non-VGA display device> at device 0.6 (no driver attached)
cardbus0: <old, non-VGA display device> at device 0.7 (no driver attached)

All the higher numbered functions (.2 and above) have a config space
of all 0's. This smells a bit like a special debug mode, but the
current atheros driver doesn't cope. It is unclear if this card is
just a flake, or if we're doing something wrong in the power-up
sequence.

Put a work around into the code that tests for this rather unusual
condition. If we power a CardBus device up, and the device says it is
multi-function, and any of the functions have a 0 device ID, try the
power-up sequence again.
2015-02-18 05:53:04 +00:00
Warner Losh
8bf007e1e6 Add a rather obnoxious warning if you don't have NEW_PCIB defined
since it's a total crap shoot if things will work.
2015-01-14 05:41:31 +00:00
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
Glen Barber
37a107a407 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
Hans Petter Selasky
3da1cf1e88 Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
John Baldwin
4edef187b8 Add support for managing PCI bus numbers. As with BARs and PCI-PCI bridge
I/O windows, the default is to preserve the firmware-assigned resources.
PCI bus numbers are only managed if NEW_PCIB is enabled and the architecture
defines a PCI_RES_BUS resource type.
- Add a helper API to create top-level PCI bus resource managers for each
  PCI domain/segment.  Host-PCI bridge drivers use this API to allocate
  bus numbers from their associated domain.
- Change the PCI bus and CardBus drivers to allocate a bus resource for
  their bus number from the parent PCI bridge device.
- Change the PCI-PCI and PCI-CardBus bridge drivers to allocate the
  full range of bus numbers from secbus to subbus from their parent bridge.
  The drivers also always program their primary bus register.  The bridge
  drivers also support growing their bus range by extending the bus resource
  and updating subbus to match the larger range.
- Add support for managing PCI bus resources to the Host-PCI bridge drivers
  used for amd64 and i386 (acpi_pcib, mptable_pcib, legacy_pcib, and qpi_pcib).
- Define a PCI_RES_BUS resource type for amd64 and i386.

Reviewed by:	imp
MFC after:	1 month
2014-02-12 04:30:37 +00:00
John Baldwin
1b1596a3b3 - Add a bus_dma tag to each PCI bus that is a child of a Host-PCI bridge.
The tag enforces a single restriction that all DMA transactions must not
  cross a 4GB boundary.  Note that while this restriction technically only
  applies to PCI-express, this change applies it to all PCI devices as it
  is simpler to implement that way and errs on the side of caution.
- Add a softc structure for PCI bus devices to hold the bus_dma tag and
  a new pci_attach_common() routine that performs actions common to the
  attach phase of all PCI bus drivers.  Right now this only consists of
  a bootverbose printf and the allocate of a bus_dma tag if necessary.
- Adjust all PCI bus drivers to allocate a PCI bus softc and to call
  pci_attach_common() from their attach routines.

MFC after:	2 weeks
2012-03-02 20:38:04 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
John Baldwin
06c9ee053d Partially revert 222753: If a CardBus card stores its CIS in a BAR, delete
the BAR after parsing the CIS.  This forces the resource range to be
reallocated if the BAR is reused by the device.

Submitted by:	deischen
Reviewed by:	imp
Approved by:	re (kib)
2011-09-12 15:21:52 +00:00
Warner Losh
4089559520 Minor cleanup:
o Consider No CIS a normal event and stop whining about it so much
  (too many cards are like this, espeically usb/firewire cards).
o Add comments to the cis reading code.
o Made the read from config space a smidge easier to read and eliminate
  a loop that can be done mathematically.
2011-06-21 22:45:31 +00:00
John Baldwin
0d439b5f93 More properly handle Cardbus cards that that store their CIS in a BAR after
the recent changes to track BAR state explicitly.  The code would now
attempt to add the same BAR twice in this case.  Instead, change this so
that it recognizes this case and only adds it once and do not delete the
BAR outright after parsing the CIS.

Tested by:	bschmidt
2011-06-06 13:21:11 +00:00
John Baldwin
8d43fea45f Don't explicitly list pci_write_ivar() for bus_write_ivar, the method is
already inherited from the PCI bus driver.
2011-05-02 15:01:28 +00:00
John Baldwin
af827f9642 Move the PCI-specific logic of removing a cardbus device into a
pci_delete_child() function called by the cardbus driver.  The new function
uses resource_list_unreserve() to release the BARs decoded by the device
being removed.

Reviewed by:	imp
Tested by:	brooks
2010-01-05 20:42:25 +00:00
John Baldwin
3a6b4b04ab Fix an error case I missed in the previous change so that the CIS resource
is fully cleaned up if we fail to find the CIS in the devices ROM.
2009-12-30 22:34:26 +00:00
John Baldwin
767dff0ac9 Delete the CIS resource after releasing it. This is needed when the CIS is
stored in a BAR since the CIS BAR is mapped before the PCI bus driver
enumerates all the BARs.  Without this change, the PCI bus driver would
attempt to initialize a BAR that was already allocated resulting in a panic.
2009-12-30 20:49:13 +00:00
John Baldwin
4e8790e943 Teach the PCI bus driver to handle PCIR_BIOS BARs properly and remove special
handling for the PCIR_BIOS decoding enable bit from the cardbus driver.
The PCIR_BIOS BAR does include type bits like other BARs.  Instead, it is
always a 32-bit non-prefetchable memory BAR where the low bit is used as a
flag to enable decoding.

Reviewed by:	imp
2009-12-30 20:47:14 +00:00
John Baldwin
f26d7f8e95 Use bus_*() rather than bus_space_*(). 2009-12-30 20:42:07 +00:00
Warner Losh
e6d3b1bd2a Minorly improved debugging. Use the DEVPRINTF macro and report the
offset for memory when mapping in the CIS.
2009-03-13 05:31:27 +00:00
Warner Losh
afb1ec6d56 Move the deactivation of the device's BAR to before the loop where we
turn deactivate the resources.  While this likely doesn't matter, it
is likely to be safer.
2009-03-12 08:42:27 +00:00
Warner Losh
41f0c91517 Restore blank line removed when fixing my earlier botch. Never do
just one last change before bed...

Pointy had to: imp
2009-03-10 22:04:52 +00:00
George V. Neville-Neil
7b77311219 Complete removal of cardbus_write_ivar which was left hanging. 2009-03-10 17:54:04 +00:00
Warner Losh
161832a1cf When freeing all the resources of the card, it is better to turn off
the PORTEN and MEMEN bits in the command register than to zero the
bars.

Use pci_write_ivar directly instead of a one-line wrapper that adds no
value.

Track verbosity changes in pci.

Remove a stray blank line.
2009-03-10 12:10:50 +00:00
Wojciech A. Koszek
172ab3e96e Remove unused variable.
Found with:	Coverity Prevent(tm)
CID:		4138
2009-02-06 00:55:19 +00:00
John Baldwin
ba8d936dd2 Goof, catch up to constant rename (I renamed it to match the overall PCI
style of having register offsets start with PCIR_* rather than PCI_*).

Submitted by:	rss
2009-02-02 22:06:20 +00:00
Warner Losh
a84736bdf6 When no driver attaches to a card, don't power down the card. We can
now read config registers of cardbus cards that are inserted, but
aren't attached to a driver.
Also, add a power related comment...
2008-12-31 07:41:42 +00:00
Warner Losh
7d0fb1f7ef Don't call destroy_dev on the alias. This fixes half a dozen PRs I think. 2008-12-02 04:54:31 +00:00
Warner Losh
db8deb424e Create a /dev/cardbus%d.cis, to be compatible with older versions of
the software.  This is a trivial amount of code to keep wireless
monitoring software working...  I plan on removing it in 9.0.
2008-11-21 03:03:57 +00:00
Warner Losh
a7de0b74a7 Overhaul of CIS parsing, next step: keep a cached copy of the CIS,
read before we configure the card, so we can implement
/dev/cardbus*.cis.  Also, do this on a per-child basis, so we now have
a different name than before.  I think i'll have to fix that for some
legacy tools to keep working.

I can now do a dumpcis on my running atheros card and have it still work!
2008-11-17 01:32:29 +00:00
Warner Losh
e371fa4547 First step in cleaning up CIS parsing and /dev/cardbus*.cis: remove
redundant malloc/free.  Add comments about how this should really be
done.  Fix an overly verbose comment about under 1MB mapping: go ahead
and set the bits, but we ignore them.
2008-11-15 05:22:06 +00:00
Warner Losh
714cb2219c Turns out this isn't even used at all... The bogon that I was tracing was
in code from my p4 tree, not -current.  Delete it here.
2008-11-03 06:37:59 +00:00
Warner Losh
89558ee870 Use child (the card) in preference to cbdev (the bridge) when
allocating resources to read the CIS.  I'm not sure when this changed,
but it is totally wrong.  Also, add a minor improvement to the
debugging.

This should help everybody trying to run dumpcis on atheros wireless
card as well.

MFC after:	2 days
2008-11-03 06:06:22 +00:00
Warner Losh
6e39a203de We can't mask out the higher order bits and have the size come out
right...  Good thing the size was ignored...

Where this macro is used, there's no reason to do it anyway.  There
seems to have been some old-time confusion between the CIS pointer
definition, and the BAR definitions at the base of this bug.
2008-11-03 05:52:43 +00:00
Marius Strobl
55aaf894e8 Make the PCI code aware of PCI domains (aka PCI segments) so we can
support machines having multiple independently numbered PCI domains
and don't support reenumeration without ambiguity amongst the
devices as seen by the OS and represented by PCI location strings.
This includes introducing a function pci_find_dbsf(9) which works
like pci_find_bsf(9) but additionally takes a domain number argument
and limiting pci_find_bsf(9) to only search devices in domain 0 (the
only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are
changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order
to no longer report false positives when searching for siblings and
dupe devices in the same domain respectively.
Along with this change the sole host-PCI bridge driver converted to
actually make use of PCI domain support is uninorth(4), the others
continue to use domain 0 only for now and need to be converted as
appropriate later on.
Note that this means that the format of the location strings as used
by pciconf(8) has been changed and that consumers of <sys/pciio.h>
potentially need to be recompiled.

Suggested by:	jhb
Reviewed by:	grehan, jhb, marcel
Approved by:	re (kensmith), jhb (PCI maintainer hat)
2007-09-30 11:05:18 +00:00
Warner Losh
17ee700be6 gcc 4.2 thinks that tupleid is uninitialized. Or might be used
uninitialized.  It gets passed into other routines that initialize
it...  Cope by initializing.

Submitted by: mjacob
2007-06-08 04:03:57 +00:00
John Baldwin
d193b870a5 Fix interrupt routing for some cards after the previous fix to clear BARs
in cardbus cards: update the saved copy of the PCIR_INTLINE register in
the PCI ivars in addition to the actual register.

Reviewed by:	imp
2007-05-16 23:40:08 +00:00
Warner Losh
cfd1374177 Write 0 to all the bars in cardbus_cardbus_setup_regs. This is needed
because on at least my dc based cards there's garbage in there.  The
recent changes in the resource code appears to have unmasked this
problem...  At least dc now probes/attaches better than it did before.

Also, we no longer need to write to the cfg for the other registers.
2007-05-16 20:00:36 +00:00