Commit Graph

16 Commits

Author SHA1 Message Date
Alexander Motin
8e6cab54e8 Do not report CFA devices as ATAPI, even though IDENTIFY data look alike. 2011-06-12 18:52:39 +00:00
Alexander Motin
276b083449 Properly log few more ATA commands used by the kernel. 2011-04-14 08:17:45 +00:00
Alexander Motin
4ef08dc5a5 MFp4:
Add Power Up In Stand-by feature support. Device with PUIS enabled
require explicit command to do initial spin-up. Mark that command
with CAM_HIGH_POWER flag, to allow CAM manage staggered spin-up.
2010-02-03 10:06:03 +00:00
Alexander Motin
83c5d981ac MFp4: Large set of CAM inprovements.
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
Alexander Motin
1c80ec0a6b Add BIO_DELETE support to ada(4):
- For SSDs use TRIM feature of DATA SET MANAGEMENT command, as defined by
ACS-2 specification working draft.
- For CompactFlash use CFA ERASE command, same as ad(4) does.

With this patch, `newfs -E /dev/ada1` was able to restore write speed of
my heavily weared OCZ Vertex SSD (firmware 1.4) up to the initial level
for the most part of it's capacity. Previous 1.3 firmware, even reportiong
TRIM capabilty bit set, was not working, reporting ABORT error for every
DSM command.

I have no idea whether it is normal, but for some reason it takes 200ms
to handle any TRIM command on this drive, that was making delete extremely
slow. But TRIM command is able to accept long list of LBAs and the length of
that list seems doesn't affect it's execution time. Implemented request
clusting algorithm allowed me to rise delete rate up to reasonable numbers,
when many parallel DELETE requests running.
2009-12-28 20:08:01 +00:00
Alexander Motin
7bdb664e50 MFp4;
- Cleanup kernel messages, mostly PMP.
- Took references on devices, while PMP reinitializes them, to not let them
go and distort freeze reference counting.
2009-12-07 16:23:25 +00:00
Alexander Motin
f3631e8d74 Add CAM_ATAIO_DMA ATA command flag to mark DMA protocol commands.
It is not needed for SATA controllers, but required for PATA.
2009-12-01 23:01:29 +00:00
Alexander Motin
b447e682d6 MFp4:
Improve ATA mode/SATA revision control.
2009-11-26 08:49:46 +00:00
Alexander Motin
c8039fc667 MFp4:
- Extend XPT-SIM transfer settings control API. Now it allows to report to
SATA SIM number of tags supported by each device, implement ATA mode and
SATA revision negotiation for both SATA and PATA SIMs.
- Make ahci(4) and siis(4) to use submitted maximum tag number, when
scheduling requests. It allows to support NCQ on devices with lower tags
count then controller supports.
- Make PMP driver to report attached devices connection speeds.
- Implement ATA mode negotiation between user settings, device and
controller capabilities.
2009-11-24 12:47:58 +00:00
Alexander Motin
30a4094f86 MFp4:
- Move tagged queueing control from ADA to ATA XPT. It allows to control
  device command queue length correctly. First step to support < 32 tags.
- Limit queue for non-tagged devices by 2 slots for ahci(4) and siis(4).
- Implement quirk matching for ATA devices.
- Move xpt_schedule_dev_sendq() from header to source file.
- Move delayed queue shrinking to the more expected place - element freeing.
- Remove some SCSIsms in ATA.
2009-11-11 11:10:36 +00:00
Alexander Motin
fd2cc0bde8 PMP commands use short format. PMP write doesn't return result. 2009-11-04 16:16:50 +00:00
Alexander Motin
c1bd46c2d3 MFp4:
- Add support for sector size > 512 bytes and physical sector of several
logical sectors, introduced by ATA-7 specification.
- Remove some obsoleted code.
2009-11-04 15:24:32 +00:00
Alexander Motin
8691755dff MFp4:
Improve reporting ATA Status error details.
2009-11-03 11:19:05 +00:00
Alexander Motin
14a0f03de2 Report SATA 3.x devices. 2009-09-27 20:50:54 +00:00
Alexander Motin
7606b4450b Short ATA command format has 28bit address, not 36bit.
Rename ata_36bit_cmd() into ata_28bit_cmd(), while it didn't become legacy.

MFC after:	2 days
2009-08-30 16:31:25 +00:00
Scott Long
52c9ce25d8 Separate the parallel scsi knowledge out of the core of the XPT, and
modularize it so that new transports can be created.

Add a transport for SATA

Add a periph+protocol layer for ATA

Add a driver for AHCI-compliant hardware.

Add a maxio field to CAM so that drivers can advertise their max
I/O capability.  Modify various drivers so that they are insulated
from the value of MAXPHYS.

The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel.  The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives.  It also supports port multipliers.

ATA drives are accessed via 'ada' device nodes.  ATAPI drives are
accessed via 'cd' device nodes.  They can all be enumerated and manipulated
via camcontrol, just like SCSI drives.  SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol.  See the camcontrol manpage for further
details.  Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.

This code is very experimental at the moment.  The userland ABI/API has
changed, so applications will need to be recompiled.  It may change
further in the near future.  The 'ada' device name may also change as
more infrastructure is completed in this project.  The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.

Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed.  In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.

The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols.  It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware.  While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged.  Help with new transports is also encouraged.

Submitted by:	scottl, mav
Approved by:	re
2009-07-10 08:18:08 +00:00