-- Begin comments from J.T. Conklin:
The most significant improvement is the addition of "float" versions
of the math functions that take float arguments, return floats, and do
all operations in floating point. This doesn't help (performance)
much on the i386, but they are still nice to have.
The float versions were orginally done by Cygnus' Ian Taylor when
fdlibm was integrated into the libm we support for embedded systems.
I gave Ian a copy of my libm as a starting point since I had already
fixed a lot of bugs & problems in Sun's original code. After he was
done, I cleaned it up a bit and integrated the changes back into my
libm.
-- End comments
Reviewed by: jkh
Submitted by: jtc
into one, hopefully functioning, Ultrastore driver. Any Ultrastore owners
out there - please speak up! We need to test this puppy.
Reviewed by:
Submitted by:
This is the slowest and most stupid of our SCSI-drivers, but it is there
and it works. It has been tested with CD-ROM and disk.
It uses no interrupts, no DMA, just polled I/0.
Transfer-rate is <= 100Kbyte/sec.
If you set the jumpers on the board, you can change the unit-number and
you will be able to have four of these co-exist in one computer, why one
would do that is somewhat unclear though.
If I ever get my hand on the docs for this, I will improve it of course,
but for now we can install and access those CD-ROMs.
- Delete redundant declarations.
- Add -Wredundant-declarations to Makefile.i386 so they don't come back.
- Delete sloppy COMMON-style declarations of uninitialized data in
header files.
- Add a few prototypes.
- Clean up warnings resulting from the above.
NB: ioconf.c will still generate a redundant-declaration warning, which
is unavoidable unless somebody volunteers to make `config' smarter.
/usr/src/usr.sbin.config:
o -DSTATCLOCK gives kludges to support the rtc non-device as well as
old kludges to support the clk non-device.
/usr/src/usr.sbin/config.8:
o Document the trivialness of the new vector.h.
/usr/src/usr.sbin/mkglue.c:
o Only print DEVICE_NAMES and NR_DEVICES in vector.h. These are
only required to support vmstat. The vmstat interface will need
to be improved for dynamic loading.
/usr/src/usr.sbin/mkioconf.c:
o Print device ids to be used as indexes into DEVICE_NAMES.
o Print secondary interrupt handler entry points (xxxintr()) instead
of primary ones (VdevU()). Primary ones are now XintrI() and
XfastintrI() and are independent of the config so they are not
handled here.
o Minor cleanups.
Submitted by: Bruce Evans
/usr/src/sys/i386/isa/clock.c:
o Garrett's statclock changes.
o Wire xxxintr, not Vclk.
o Wire using register_intr(), not setidt().
/usr/src/sys/i386/isa/icu.s:
o Garrett's statclock changes.
o Removed unused variable high_imask.
o Fake int 8 for rtc as well as int 0 for clk. Required for kernel
profiling with statclock, harmless otherwise.
/usr/src/sys/i386/isa/isa.c:
o Allow isdp->id_irq and other things in *isdp to be changed by
probes. Changing interrupts later requires direct calls to
register_intr() and unregister_intr() and more care.
ALLOW_CONFLICT_* is brought over from 1.1.5, except
ALLOW_CONFLICT_IRQ is not supported. IRQ conflict checking is
delayed until after probing so that drivers can change the IRQ
to a free one; real conflicts require more cooperation between
drivers to handle.
o Too many details to list.
o This file requires splitting and a lot more work.
/usr/src/sys/i386/isa/isa_device.h:
o Declare more things more completely.
/usr/src/sys/i386/isa/sio.c:
o Prepare to register interrupt handlers as fast.
/usr/src/sys/i386/isa/vector.s:
o Generate entry code for 16 fast interrupt handlers and 16 normal
interrupt handlers. Changed some constants to variables:
# $unit is now intr_unit[intr]. Type is int. Someday it should
be a cookie suitable for the handler (e.g., a struct com_s for
sio).
# $handler is now intr_handler[intr].
# intrcnt_actv[id_num] is now *intr_countp[intr]. The indirection
is required to get a contiguous range of counters for vmstat
and so that the drivers depend more in the driver than on the
interrupt number (drivers could take turns using an interrupt
and the counts would remain correct). There is a separate
counter for each device and for each stray interrupt. In
1.1.5, stray interrupt 7 clobbers the count for device 7 or
something worse if there is no device 7 :-(.
# mask is now intr_mask[intr] (was already indirect).
o Entry points are now _XintrI and _XfastintrI (I = intr = 0-15),
not _VdevU (U = unit).
o Removed BUILD_VECTORS stuff. There's a trace of it left for
the string table for vmstat but config now generates the
string in one piece because nothing more is required.
o Removed old handling of stray interrupts and older comments
about it.
Submitted by: Bruce Evans
done. This patch was extended to also include a suggested change by
Kirk McKusick which allows the control tty to be reasigned to a different
tty without losing a vnode.
Fixed security problem with telnetd, which allowed
telnet -l -hcert.org localhost
to change the user's host in utmp.
Thanks to Matthew Green <mrgreen@@mame.mu.oz.au> for showing me this one.
Reviewed by: karl, guido
Submitted by: mrgreen@@mame.mu.oz.au
not provide the full accuracy of a randomized statistical clock, it does
provide greater accuracy than the previous method, while not significantly
increasing overhead. It also provides profiling support at 1024 Hz.
You must re-compile config before making a new kernel, or you will end
up with unresolved symbols.
Reviewed uy: Bruce evans said it worked for him.
Delete the ifdef GPL_EMULATE case here and made the padding work for
both types of emulators so that there is no longer a need to compile
ps and friends new if you are using the GPL math emulator instead the
normal one.
Added code to check for an adaptec 1542B Version 3.20 Board. This was the
first board that supports >1Gb drives and has the extended bios. So we
need also to disable the exbios like it is done for the 1542C/CF boards.
