Some early PCIe chipsets are explicitly listed in the white-list to
enable use of the MMIO config space accesses, perhaps because ACPI
tables were not reliable source of the base MCFG address at that time.
For that chipsets, MCFG base was read from the known chipset MCFGbase
config register.
During very early stage of boot, when access to the PCI config space
is performed (see e.g. pci_early_quirks.c), we cannot map 255MB of
registers because the method used with pre-boot pmap overflows initial
kernel page tables.
Move fallback to read MCFGbase to the attachment method of the
x86/legacy device, which removes code duplication, and results in the
use of io accesses until MCFG is parsed or legacy attach called.
For amd64, pre-initialize cfgmech with CFGMECH_1, right now we
dynamically assign CFGMECH_1 to it anyway, and remove checks for
CFGMECH_NONE.
There is a mention in the Intel documentation for corresponding
chipsets that OS must use either io port or MMIO access method, but we
already break this rule by reading MCFGbase register, so one more
access seems to be innocent.
Reported by: longwitz@incore.de
PR: 236838
Reviewed by: avg (other version), jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19833
RTL8152 (chip version URE_CHIP_VER_4C10) doesn't
have hardwired MAC address, in other words, it is all zeros.
This commit fixes it by setting random MAC address
when MAC address is all zeros.
Reviewed by: kevlo
Differential Revision: https://reviews.freebsd.org/D19856
$() is more modern and also nests. Convert the mix of styles to using
only the former (although the latter was more common). It's the more
dominant style in other shell scripts these days as well.
Differential Revision: https://reviews.freebsd.org/D19840
In particular, ensure that writers are not unleashed before SU
structures are initialized. Also, correctly handle MNT_ASYNC before
this.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
descriptor, not the file descriptor. The file descriptor is used only for
verification so do not expect any additional capabilities on it.
Reported by: antoine
Tested by: antoine
Discussed with: kib, emaste, bapt
Sponsored by: Fudo Security
Both linux and u-boot sources for RTL8152 driver has this value.
RTL8152 USB ethernet is used in NanoPI R1 board as second ethernet.
This fixes for me RTL8152 USB ethernet not detected problem after
reboot on NanoPI R1 board.
Both NetBSD and OpenBSD have a wrong value so far.
All variable assignments that start in column 1 have to be on a single
line for amd to build due to as weird dependency there (most likely it
can be fixed to use the new VARS_ONLY feature, but it isn't
today). usr.sbin/amd/include/Makefile calls
usr.sbin/amd/include/newvers.sh which does:
eval `LC_ALL=C egrep '^[A-Z]+=' $1 | grep -v COPYRIGHT`
which is where that requirement comes from. It handles COPYRIGHT since
that's an exception. Rather than add additional exceptions, cope with
the long line in newvers.sh instead. Note: it no longer needs to
filter COPYRIGHT because the assignment doesn't start in column 1
anymore.
I had done a universe when I had an earlier version of r346018 that
had it as one line. When I changed it to multi-line as suggested in
the review, I only built kernels on a couple of architectures to make
sure it didn't break anything.
Add comment to newvers.sh noting this.
Obviously, this unbreaks the amd build.
In certain scenarios, it is possible for PCPU data to be
accessed before it has been initialized (e.g. during printf
if the kernel was built with the TSLOG option).
Initialize the PCPU pointer for hart 0 at the beginning of
initriscv() rather than near the end.
Reviewed by: markj
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D19726
Such processes will be reparented to the reaper when the current
parent is done with them (i.e., ptrace detached), so p_oppid must be
updated accordingly.
Add a regression test to exercise this code path. Previously it
would not be possible to reap an orphan with a stale oppid.
Reviewed by: kib, mjg
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19825
'tos' is an index into an array and never holds a negative value. Correct
its signedness to match PCTRIE_LIMIT, which it is compared to in assertions.
No functional change (kills a warning).
The kernel code uses UDP to do upcalls to the nfsuserd(8) daemon to get
updates to the username<->uid and groupname<->gid mappings.
A change to AF_LOCAL last year had to be reverted, since it could result
in vnode locking issues on the AF_LOCAL socket.
This patch adds INET6 support and the required #ifdef INET and INET6
to the code.
Requested by: bz
PR: 205193
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: http://reviews.freebsd.org/D19218
Don't page fault if the file descriptor provided with "-o fd" is invalid.
This is a merge of r345419 from the projects/fuse2 branch.
Reviewed by: ngie
Tested by: Marek Zarychta <zarychtam@plan-b.pwste.edu.pl>
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19836
the file associated with the given file descriptor.
Reviewed by: kib, asomers
Reviewed by: cem, jilles, brooks (they reviewed previous version)
Discussed with: pjd, and many others
Differential Revision: https://reviews.freebsd.org/D14567
* The BIO bio_data may not be page aligned. Only the base address of each
page worth of data is extracted to pass to OPAL. Without page alignment
it can scribble over random memory when finishing the page read. Fix this
by short-reading the first page to properly align for full page reads.
* Fix the definition of OPAL_FLASH_ERASE.
* Properly handle the async message result, as now returned from r345974.
* Properly return the full opal_msg from an async completion.
* Don't keep bugging OPAL, wait 100us or so. With some minor changes to
DELAY() to drop to very low priority, the thread won't hog the CPU while
polling for the async completion.
It performs BUS_RESET_CHILD() on the parental bus and the specified
device.
Reviewed by: imp (previous version), jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19646
For PCI device (i.e. child of a PCI bus), reset tries FLR if
implemented and worked, and falls to power reset otherwise.
For PCIe bus (child of a PCIe bridge or root port), reset
disables PCIe link and then re-trains it, performing what is known as
link-level reset.
Reviewed by: imp (previous version), jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19646
The methods BUS_RESET_PREPARE(), BUS_RESET(), and BUS_RESET_POST()
should be implemented by bus which can provide reset to a device. The
methods are described in inline doxygen comments.
Code only provides BUS_RESET_PREPARE() and BUS_RESET_POST() helpers
instead of default implementation, because actual bus needs to handle
device state around reset, while helpers provide the other half of
typical prepare/post code.
Reviewed by: imp (previous version), jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19646
Otherwise we might miss the last iteration where EOF appears below
unaligned noff.
Reported and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19811
Add the ability to use interrupts for i2c message.
We still use polling for early boot i2c transfer (for PMIC
for example) but as soon as interrupts are available use them.
On Allwinner SoC >A20 is seems that polling mode is broken for some
reason, this is now fixed by using interrupt mode.
For Allwinner also fix the frequency calculation, the one in the code
was for when the APB frequency is at 48Mhz while it is at 24Mhz on most
(all?) Allwinner SoCs. We now support both cases.
While here add more debug info when it's compiled in.
Tested On: A20, H3, A64
MFC after: 1 month
Remove the phrase from boilerplate copyright we stick on vers.c when
we can't find the template file. In practice, this won't change a
thing, except for the case of compiling the kernel standalone w/o the
rest of a tree on a system that doesn't have
/usr/share/examples/etc/bsd-copyright installed.
r338192 reverted the changes to nfsuserd so that it could use an AF_LOCAL
socket, since it resulted in a vnode locking panic().
Post r338192 nfsuserd daemons use the old AF_INET socket for upcalls and
do not use these kernel changes.
I left them in for a while, so that nfsuserd daemons built from head sources
between r320757 (Jul. 6, 2017) and r338192 (Aug. 22, 2018) would need them
by default.
This only affects head, since the changes were never MFC'd.
I will add an UPDATING entry, since an nfsuserd daemon built from head
sources between r320757 and r338192 will not run unless the "-use-udpsock"
option is specified. (This command line option is only in the affected
revisions of the nfsuserd daemon.)
I suspect few will be affected by this, since most who run systems built
from head sources (not stable or releases) will have rebuilt their nfsuserd
daemon from sources post r338192 (Aug. 22, 2018)
This is being reverted in preparation for an update to include AF_INET6
support to the code.
There are a few places that use hand crafted versions of the macros
from sys/netinet/in.h making it difficult to actually alter the
values in use by these macros. Correct that by replacing handcrafted
code with proper macro usage.
Reviewed by: karels, kristof
Approved by: bde (mentor)
MFC after: 3 weeks
Sponsored by: John Gilmore
Differential Revision: https://reviews.freebsd.org/D19317
The code enabled when "DEBUG" is defined uses mem_alloc(), which is a
malloc(.., M_RPC, M_WAITOK | M_ZERO), but then calls gss_release_buffer()
which does a free(.., M_GSSAPI) to free the memory.
This patch fixes the problem by replacing mem_alloc() with a
malloc(.., M_GSSAPI, M_WAITOK | M_ZERO).
This bug affects almost no one, since the sources are not normally built
with "DEBUG" defined.
Submitted by: peter@ifm.liu.se
MFC after: 2 weeks
provider grows, GELI will expand automatically and will move the metadata
to the new location of the last sector.
This functionality is turned on by default. It can be turned off with the
-R flag, but it is not recommended - if the underlying provider grows and
automatic expansion is turned off, it won't be possible to attach this
provider again, as the metadata is no longer located in the last sector.
If the automatic expansion is turned off and the underlying provider grows,
GELI will only log a message with the previous size of the provider, so
recovery can be easier.
Obtained from: Fudo Security
In r337703 DTS files were updated to Linux 4.18, including Linux commit
4d8b032d3c03f4e9788a18bbb51b10e6c9e8a56b which removed the `phy_id`
property from am335x-bone-common (as the property was deprecated).
Use `phy-handle` via fdt_get_phyaddr, keeping the existing code as a
fallback for old DTBs.
PR: 236624
Submitted by: manu, Gerald Aryeetey <aryeeteygerald_rogers.com>
Reported by: Gerald Aryeetey
Reviewed by: manu
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19814
Despite the call to vtruncbuf() from detrunc(), which results in
zeroing part of the partial page after EOF, there still is a
possibility to retain the stale data which is revived on file
enlargement. If the filesystem block size is greater than the page
size, partial block might keep other after-EOF pages wired and they
get reused then. Fix it by zeroing whole part of the partial buffer
after EOF, not relying on vnode_pager_setsize().
PR: 236977
Reported by: asomers
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Harvesting has to compete for the TPM chip with userspace.
Before this change the callout could hijack an unread buffer
causing a userspace call to the TPM to fail.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: delphij
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19712
The e5500 has an FPU, but lacks the optional fsqrt instruction. This
instruction gets emulated in the kernel, but the emulation uses stale data,
from the last switch out, and does not return the result of the operation
immediately. Fix both of these conditions by saving and restoring the FPRs
around the emulation point.
MFC after: 1 week
MFC with: r345829
The current approach of injecting manifest into mac_veriexec is to
verify the integrity of it in userspace (veriexec (8)) and pass its
entries into kernel using a char device (/dev/veriexec).
This requires verifying root partition integrity in loader,
for example by using memory disk and checking its hash.
Otherwise if rootfs is compromised an attacker could inject their own data.
This patch introduces an option to parse manifest in kernel based on envs.
The loader sets manifest path and digest.
EVENTHANDLER is used to launch the module right after the rootfs is mounted.
It has to be done this way, since one might want to verify integrity of the init file.
This means that manifest is required to be present on the root partition.
Note that the envs have to be set right before boot to make sure that no one can spoof them.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19281
This fix was committed less than 2 months after the code was forked into the
powerpc kernel. Though powerpc doesn't use quad-precision floating point,
or need it for emulation, the changes do look like correctness fixes
overall.
This was found while trying to get fsqrt emulation working on e5500, which
does have a real FPU, but lacks the fsqrt instruction. This is not the
complete fix, the rest is to be committed separately.
MFC after: 1 week
