The IPv6 reassembly fragment limit is based on the number of mbuf clusters,
which are a global resource. However, the limit is currently applied
on a per-VNET basis. Given enough VNETs (or given sufficient customization
on enough VNETs), it is possible that the sum of all the VNET fragment
limits will exceed the number of mbuf clusters available in the system.
Given the fact that the fragment limits are intended (at least in part) to
regulate access to a global resource, the IPv6 fragment limit should
be applied on a global basis.
Note that it is still possible to disable fragmentation for a particular
VNET by setting the net.inet6.ip6.maxfragpackets sysctl to 0 for that
VNET. In addition, it is now possible to disable fragmentation globally
by setting the net.inet6.ip6.maxfrags sysctl to 0.
Reviewed by: jhb
Security: FreeBSD-SA-18:10.ip
Security: CVE-2018-6923
There is a hashing algorithm which should distribute IPv4 reassembly
queues across the available buckets in a relatively even way. However,
if there is a flaw in the hashing algorithm which allows a large number
of IPv4 fragment reassembly queues to end up in a single bucket, a per-
bucket limit could help mitigate the performance impact of this flaw.
Implement such a limit, with a default of twice the maximum number of
reassembly queues divided by the number of buckets. Recalculate the
limit any time the maximum number of reassembly queues changes.
However, allow the user to override the value using a sysctl
(net.inet.ip.maxfragbucketsize).
Reviewed by: jhb
Security: FreeBSD-SA-18:10.ip
Security: CVE-2018-6923
The IP reassembly fragment limit is based on the number of mbuf clusters,
which are a global resource. However, the limit is currently applied
on a per-VNET basis. Given enough VNETs (or given sufficient customization
of enough VNETs), it is possible that the sum of all the VNET limits
will exceed the number of mbuf clusters available in the system.
Given the fact that the fragment limit is intended (at least in part) to
regulate access to a global resource, the fragment limit should
be applied on a global basis.
VNET-specific limits can be adjusted by modifying the
net.inet.ip.maxfragpackets and net.inet.ip.maxfragsperpacket
sysctls.
To disable fragment reassembly globally, set net.inet.ip.maxfrags to 0.
To disable fragment reassembly for a particular VNET, set
net.inet.ip.maxfragpackets to 0.
Reviewed by: jhb
Security: FreeBSD-SA-18:10.ip
Security: CVE-2018-6923
Currently, all IPv6 fragment reassembly queues are kept in a flat
linked list. This has a number of implications. Two significant
implications are: all reassembly operations share a common lock,
and it is possible for the linked list to grow quite large.
Improve IPv6 reassembly performance by hashing fragments into buckets,
each of which has its own lock. Calculate the hash key using a Jenkins
hash with a random seed.
Reviewed by: jhb
Security: FreeBSD-SA-18:10.ip
Security: CVE-2018-6923
Currently, IPv4 fragments are hashed into buckets based on a 32-bit
key which is calculated by (src_ip ^ ip_id) and combined with a random
seed. However, because an attacker can control the values of src_ip
and ip_id, it is possible to construct an attack which causes very
deep chains to form in a given bucket.
To ensure more uniform distribution (and lower predictability for
an attacker), calculate the hash based on a key which includes all
the fields we use to identify a reassembly queue (dst_ip, src_ip,
ip_id, and the ip protocol) as well as a random seed.
Reviewed by: jhb
Security: FreeBSD-SA-18:10.ip
Security: CVE-2018-6923
We always zero the invalidated PTE/PDE for superpage, which means that
L1TF CPU vulnerability (CVE-2018-3620) can be only used for reading
from the page at zero.
Note that both i386 and amd64 exclude the page from phys_avail[]
array, so this change is redundant, but I think that phys_avail[] on
UEFI-boot does not need to do that. Eventually the blacklisting
should be made conditional on CPUs which report that they are not
vulnerable to L1TF.
Reviewed by: emaste. jhb
Sponsored by: The FreeBSD Foundation
curpmap.
When performing context switch on a machine without PCID, if current
%cr3 equals to the new pmap %cr3, which is typical for kernel_pmap
vs. kernel process, I overlooked to update PCPU curpmap value. Remove
check for %cr3 not equal to pm_cr3 for doing the update. It is
believed that this case cannot happen at all, due to other changes in
this revision.
Also, do not set the very first curpmap to kernel_pmap, it should be
vmspace0 pmap instead to match curproc.
Move the common code to activate the initial pmap both on BSP and APs
into pmap_activate_boot() helper.
Reported by: eadler, ambrisko
Discussed with: kevans
Reviewed by: alc, markj (previous version)
Tested by: ambrisko (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16618
Rather than hard-coding the number of CPUs to 2, look up the PVPE field
in MVPConf0, as the valid VPE numbers are from 0 to PVPE inclusive.
Submitted by: "James Clarke" <jrtc4@cam.ac.uk>
Reviewed by: br
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16644
At some point memcpy() may be an ifunc, ifunc resolution cannot be done
until CPU identification has been performed, and CPU identification must
be done after loading any microcode updates.
X-MFC with: r337715
Sponsored by: The FreeBSD Foundation
it read-only instead of just failing if the media is write-protected.
The /net doesn't seem to require the flag.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
after opening the console, replacing init as PID 1.
From the user point of view, it makes it possible to run eg the
shell as PID 1, using 'set init_exec=/bin/sh' at the loader(8)
prompt.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16625
Trap reads to the arm64 ID registers and write a safe value into them. This
will allow us to put more useful values in these later and have userland
check them to find what features the hardware supports.
These are currently safe defaults, but will later be populated with better
values from the hardware.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16533
It was lost when tryforward appeared. Now ip[6]_tryforward will be enabled
only when sending redirects for corresponding IP version is disabled via
sysctl. Otherwise will be used default forwarding function.
PR: 221137
Submitted by: mckay@
MFC after: 2 weeks
r330951 by smh fixed the mps driver to avoid deadlocks when panicing.
The same code is needed for mpr, so port it here, along with the fix
which allows the CCBs scheduled to complete avoiding at least a scary
message and likely other unintended consequences.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D16663
When we're shutting down, we send a number of start/stop commands to
the known targets. We have to wait for them to complete. During a
panic, the interrupts are off, and using pause to wait for them to
fire and complete won't work: we have to poll after pause returns so
the completion routines of the CCBs run so we decrement work
outstanding counts.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D16663
xpt_sim_poll takes the sim to poll as an argument. It will do the
proper locking protocol, call the SIM polling routine, and then call
camisr_runqueue to process completions on any CCBs the SIM's poll
routine completed. It will be used during late shutdown when a SIM is
waiting for CCBs it sent during shutdown to finish and the scheduler
isn't running because we've panic'd.
This sequence was used twice in cam_xpt, so refactor those to use this
new function.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D16663
Move evdev_ev_kbd_event() helper from evdev to kbd.c as otherwise evdev
unconditionally requires all keyboard and console stuff to be compiled
into the kernel. This dependency happens as evdev_ev_kbd_event() helper
references kbdsw global variable defined in kbd.c through use of
kbdd_ioctl() macro.
While here make all keyboard drivers respect evdev_rcpt_mask while setting
typematic rate and LEDs with evdev interface.
Requested by: Milan Obuch <bsd@dino.sk>
Reviewed by: hselasky, gonzo
Differential Revision: https://reviews.freebsd.org/D16614
Now softc should be retrieved from struct edvev * pointer
with evdev_get_softc() helper.
wmt(4) is a sample of driver that support both KPI.
Reviewed by: hselasky, gonzo
Differential Revision: https://reviews.freebsd.org/D16614
Newer chips may require assert/deassert after power down for proper
startup. Check respective flag in DEVIDLE_CTRL and perform operation
if neccesssary.
PR: 221777
Submitted by: marc.priggemeyer@gmail.com
Obtained from: DragonFly BSD
Tested on: Thinkpad T470
to help avoid hard-coding 'python<MAJOR>.<MINOR>' in several
scripts in the client-side scripts.
PR: 230248
MFC after: 3 days
Submitted by: gustavo.scalet@collabora.com
Sponsored by: The FreeBSD Foundation