Instead of trying to set reasonable register values, save significant
register values, then prepare for font upload and then restore
registers from saved data.
This seems to fix text mode for most cases where text mode breakage
was reported.
Draw console on efi.
Add vbe framebuffer for BIOS loader (vbe off, vbe on, vbe list,
vbe set xxx).
autoload font (/boot/fonts) based on resolution and font size.
Add command loadfont (set font by file) and
variable screen.font (set font by size). Pass loaded font to kernel.
Export variables:
screen.height
screen.width
screen.depth
Add gfx primitives to draw the screen and put png image on the screen.
Rework menu draw to iterate list of consoles to enamble device specific
output.
Probably something else I forgot...
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27420
We should have nextboot feature implemented in libsa zfs code.
To get there, I have created zfs_nextboot() implementation based on
two sources, our current simple textual string based approach with added
structured boot label PAD structure from OpenZFS.
Secondly, all nvlist details are moved to separate source file and
restructured a bit. This is done to provide base support to add nvlist
add/update feature in followup updates.
And finally, the zfsboot/gptzfsboot disk access functions are swapped to use
libi386 and libsa.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25324
Inject \e[J to erase the initial loader screen. We have two options,
find where out cursor is and use BIOS scroll for data from boot2 or erase the
display and start from origin. Erasing the screen is easier and we also
get the screen buffer initialized.
Sponsored by: Netflix, Klara Inc.
These mappings are never visible to userspace as they get replaced when
the amd64 pmap is bootstrapped, but there is no need to set PG_U in the
first place.
Reviewed by: alc, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24547
The SCR, scratch register was not present on the 8250 and 8250B UART, so we
can use to test if we actually do have serial port.
We need this test because some systems will get long delays while attempting
to write to non-existing port and this will slow down the console IO
to extreme.
MFC after: 1 week
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
smbios used to be an i386 only kinda weird quirk to the x86
architecture. But UEFI picked it up, dusted it off and now it's many
other locations. Make it base technology by moving it to libsa and
fixing up the compliation. The code has issues with unaligned access
still, but that will be addressed in a followup commit.
Differential Revision: https://reviews.freebsd.org/D23660
Create a ptov() function. It's basically the same as the btx PTOV
macro, but works everywhere. smbios needs this to translate addresses,
but the translation differs between BIOS booting and EFI booting. Make
it a function so one smbios.o can be used everywhere. Provide
definitions for it in the two loaders affected.
Differential Revision: https://reviews.freebsd.org/D23660
CD boot is broken for some systems since bioscd and biosdisk merge. The issue is that we can not use anything else than int 13 ah=0x4b to query cd information.
The patch does restore the same probe as was originally used in bioscd.c. Additionally extra buffer padding is used to avoid memory corruption caused by some systems.
PR: 234031
Reported by: ultramage and others
MFC after: 1 day
As a new x86 CPU vendor, Chengdu Haiguang IC Design Co., Ltd (Hygon)
is a joint venture between AMD and Haiguang Information Technology Co.,
Ltd., aims at providing x86 processors for China server market.
The first generation Hygon processor(Dhyana) shares most architecture
with AMD's family 17h, but with different CPU vendor ID("HygonGenuine")
and PCI vendor ID(0x1d94) and family series number 18h(Hygon negotiated
with AMD to confirm that only Hygon use family 18h).
To enable Hygon Dhyana support in FreeBSD, add new definitions
HYGON_VENDOR_ID("HygonGenuine") and X86_VENDOR_HYGON(0x1d94) to identify
Hygon Dhyana CPU.
Initialize the CPU features(topology, local APIC ext, MSI, TSC, hwpstate,
MCA, DEBUG_CTL, etc) for amd64 and i386 mode by sharing the code path of
AMD family 17h.
The changes have been applied on FreeBSD 13.0-CURRENT and tested
successfully on Hygon Dhyana processor.
References:
[1] Linux kernel patches for Hygon Dhyana, merged in 4.20:
https://git.kernel.org/tip/c9661c1e80b609cd038db7c908e061f0535804ef
[2] MSR and CPUID definition:
https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf
Submitted by: Pu Wen <puwen@hygon.cn>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23163
For all the INT13 calls, use symbolic names instead of magic numbers. This makes
it easier to understand what the code is doing w/o a trip to google to find what
these numbers mean.
Add settable variables to control teken default color attributes.
The supported colors are 0-7 or basic color names:
black, red, green, brown, blue, magenta, cyan, white.
The current implementation does add some duplication which will be addressed
later.
Replace mini cons25 emulator with teken, this does enable us proper console
terminal for loader and will make it possible to implement different
back end callbacks to draw to screen.
At this time we still only "draw" in text mode.
The values of the d_slice and d_partition fields of a disk_devdesc have a
few values with special meanings in the disk_open() routine. Through various
evolutions of the loader code over time, a d_partition value of -1 has
meant both "use the first ufs partition found in the bsd label" and "don't
open a bsd partition at all, open the raw slice."
This defines a new special value of -2 to mean open the raw slice, and it
gives symbolic names to all the special values used in d_slice and
d_partition, and adjusts all existing uses of those fields to use the new
constants.
The phab review for this timed out without being accepted, but I'm still
citing it below because there is useful commentary there.
Differential Revision: https://reviews.freebsd.org/D19262
Use recent best practices for Copyright form at the top of
the license:
1. Remove all the All Rights Reserved clauses on our stuff. Where we
piggybacked others, use a separate line to make things clear.
2. Use "Netflix, Inc." everywhere.
3. Use a single line for the copyright for grep friendliness.
4. Use date ranges in all places for our stuff.
Approved by: Netflix Legal (who gave me the form), adrian@ (pmc files)
Just like for Acer C270 chromebook the E820 extmem workaround is required for
FreeBSD to boot on Dell chromebook.
PR: 204916
Submitted by: Keith White <kwhite@site.uottawa.ca>
MFC after: 1 week
We have no option than trust INT13 ah=08 return code during the init phase.
PR: 234460
Reported by: Oleh Hushchenkov
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18723
We do have 16KB buffer space defined in pxe.c, move it to bio.c and implement
bio_alloc()/bio_free() interface to make it possible to use this space for
other BIOS calls (notably, from biosdisk.c).
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D17131
Create unified block IO implementation in BIOS version, like it is done in UEFI
side. Implement fd, disk and cd device lists, this will split floppy devices
from disks and will allow us to have consistent, predictable device naming
(modulo BIOS issues).
Differential Revision: https://reviews.freebsd.org/D17888
As part of the migration away from obsolete binutils we want to retire
GNU as. Most assembly files used on amd64 have a .S extension and are
assembled with Clang's Integrated Assembler (IAS); rename pxetram.s to
.S to use IAS as well.
The generated .text is identical (the entire .o file is not, as Clang
adds debug info.)
PR: 205250, 233094
Sponsored by: The FreeBSD Foundation
The disk access is validated by using partition table definitions, therefore
we have no need for if statements, just set the disk size.
Of course the partition table itself may be incorrect/inconsistent, but if
so, we are in trouble anyhow.
Differential Revision: https://reviews.freebsd.org/D17822
The bd_print/bd_open/bd_strategy need to make sure the device does have
media, before getting into performing IO operations. Some systems can
hung if the device without a media is accessed.
Reported by: yuripv
while probing for drives, use int13 extended info before standard one and
provide workaround for case we are not getting needed information in case
of floppy drive.
In case of INT13 errors, there are (at least) 3 error codes appearing in case
of missin media - 20h, 31h and 80h. Flag the no media and do not print an
error.
Differential Revision: https://reviews.freebsd.org/D17667
The 4kn support in current bios specific biosdisk.c is broken, as the code
is only implementing the support for the 512B sector size.
This work is building the support for custom size sectors, we still do assume
the requested data to be multiple of 512B blocks and we only do address the
biosdisk.c interface here.
For reference, see also:
https://www.illumos.org/issues/8303https://www.illumos.org/rb/r/547
As the GELI is moved above biosdisk "layer", the GELI should just work
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D11174
Clang's Integrated Assembler was previously disabled for i386 with the
note that it "doesn't grok .codeNN directives yet." This is no longer
the case (and hasn't been for some time), and the assembled output .text
is identical between gas and IAS.
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
BD_SUPPORT_FRAGS is preprocessor knob to allow partial reads in bioscd/biosdisk
level. However, we already have support for partial reads in bcache, and there
is no need to have duplication via preprocessor controls.
Note that bioscd/biosdisk interface is assumed to perform IO in 512B blocks,
so the only translation we have to do is 512 <-> native block size.
Differential Revision: https://reviews.freebsd.org/D16600
Since bd_open() does early increment for reference counter and bcache
allocation, it also should undo those in case of the error.
Also remove unused variables rdev, g_err.
number and CHS based number. However, on some systems, BIOS would
report 0 in CHS fields, making the system to think there is 0 sectors.
Add a check before comparing the calculated total with bd_sectors.
Reviewed by: tsoome, cy
Differential Revision: https://reviews.freebsd.org/D16577
number of sectors reported through the BIOS. Cylinders * heads *
sectors may not necessarily be equal to the total number of sectors
reported through int13h function 48h.
An example of this is when a Mediasonic HD3-U2B PATA to USB enclosure
with a 80 GB disk is attached. Loader hangs at line 506 of
stand/i386/libi386/biosdisk.c while attempting to read sectors beyond
the end of the disk, sector 156906855. I discovered that the Mediasonic
enclosure was reporting the disk with 9767 cylinders, 255 heads, 63
sectors/track. That's 156906855 sectors. However camcontrol and
Windows 10 both report report the disk having 156301488 sectors, not
the calculated value. At line 280 biosdisk.c sets the sectors to the
higher of either bd->bd_sectors or the total calculated at line 276
(156906855) instead of the lower and correct value of 156301488 reported
by int 13h 48h.
This was tested on all three of my Mediasonic HD3-U2B PATA to USB
enclosures.
Instead of using the higher of bd_sectors (returned by int13h) or the
calculated value, this patch uses the lower and safer of the values.
Reviewed by: tsoome@
Differential Revision: https://reviews.freebsd.org/D16577
This moves the bulk of the geli support from lib386/biosdisk.c into a new
geli/gelidev.c which implements a devsw-type device whose dv_strategy()
function handles geli decryption. Support for all arches comes from moving
the taste-and-attach code to the devopen() function in libsa.
After opening any DEVT_DISK device, devopen() calls the new function
geli_probe_and_attach(), which will "attach" the geli code to the open_file
struct by creating a geli_devdesc instance to replace the disk_devdesc
instance in the open_file. That routes all IO for the device through the
geli code.
A new public geli_add_key() function is added, to allow arch/vendor-specific
code to add keys obtained from custom hardware or other sources.
With these changes, geli support will be compiled into all variations of
loader(8) on all arches because the default is WITH_LOADER_GELI.
Relnotes: yes
Sponsored by: Microchip Technology Inc
Differential Revision: https://reviews.freebsd.org/D15743
Eliminate 4 of the copies of the arg parsing in /boot/laoder
by using boot_parse_cmdline.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
While ../zfs/libzfs.h mostly works, there are a few situations where
it does not. Eliminate the problem by using plain libzfs.h, like we do
for ufs support. This fixes the weird cases, and is easier to
understand. It also follows the general style convetion of avoiding
../ in #includes.
The GELI boot code rounds reads up to 4k, since the encrypted sectors are
4k, and must be decrypted as a unit. With oddball sized disks (almost
always virtual), this can lead to reading past the end of the disk.
Reviewed by: imp, tsoome
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D15844
`rdev` and `disk` serve the same purpose, read the partition table without
the `d_offset` or `d_slice` set, so the read is relative to the start of
the disk. Reuse the already initialized `disk` instead of making another
copy later.
Sponsored by: Klara Systems
The wrong condition is used when evaluating the return of disk_ioctl()
This results in reaching the 'We should not get here' branch in most casts
Reviewed by: imp
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D15839
e.g. boot_mute, boot_single, boot_verbose, and friends; we checked for these
in multiple places, consolidate into common/ and allow a setting of "NO" for
any of these to turn them off. This allows systems with multiple
loader.conf(5) or loader.conf(5) overlay systems to easily turn off
variables in later processed files by setting it to NO.
Reported by: Nick Wolff @ iXsystems
Reviewed by: imp
r330809 replaced duplication of devdesc struct fields with an embedded copy
of the devdesc struct, to avoid fragility. That means all the scattered
comments indicating that structs must match are no longer valid. Likewise
asserts that attempted to mitigate some of the old fragility.
Reviewed by: imp@
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
hrs@ and kuriyama@ have found that on some HP BIOS, a system will fail to
boot immediately after installation with the claim that it can't work out
which disk they are booting from.
They tracked it down to a buffer overrun, and found that it could be
alleviated by doing a dummy read before-hand.
Submitted by: kuriyama
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14341
A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson
The current system is fragile and requires very careful layout of all
*_devdesc structures. It also makes it hard to change the base
devdesc. Take a page from CAM and put the 'header' in all the derived
classes and adjust the code to match.
For OFW, move the iHandle h_handle out of a slot conflicting with
d_opendata. Due to quirks in the alignment rules, this worked.
However changing the code to use d_opendata storage now that it's a
pointer is hard, so just have a separate field for it.
All other cleanups were to make the *_devdesc structures match where
they'd taken some liberties that were none-the-less compatible enough
to work.
Make sure { on the same line as struct for all struct *devdesc. Move
some type definitions to next to the dv_type define, since that's what
sets the d_type.
I had thought that this would be useful. However it was committed too
late, and wound up being unused. It's in the way of future work now,
so retire it rather than bring it forward.
MK_CTF, MK_SSP, MK_PROFILE, NO_PIC, and INTERNALLIB are always the
same, so set them in defs.mk. MAN= is common, so set it here too.
This removes a lot of boring repetition from the Makefiles that added
almost no value.
Default WARNS to 0 still, since there's still some warnings on other
architectures.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13301
HAVE_GPT isn't currently a thing, but HAVE_GELI is. Replace the former
with the latter and remove util.o from the build list (it's picked up
from libsa/libsa32, and that's OK).
Sponsored by: Netflix
