There is nothing hdmi related in this interface, it's just a generic interface
for crt controller so rename it.
This also remove the 'hdmi' device used in arm kernel config. 'vt' now controls
if we build this interface (sc(4) isn't supported on arm).
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39120
device 'hdmi' is too generic (and will be used later in a new device) so rename
the arm IMX devices to some proper name.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39118
This matches the return type of pmap_mapdev/bios.
Reviewed by: kib, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36548
The devmap variants used vm_offset_t for some reason, and a few places
explicitly cast bus addresses to vm_offset_t. (Probably those casts
along with similar casts for vm_size_t should just be removed and
instead permit the compiler to DTRT.)
Reviewed by: markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D35961
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33832
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33831
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33830
Add a new ioctl to vt to make it possible to export RGB offsets
set by vt drivers. This is needed to fix colors on X and Mesa
on some machines, especially on modern PowerPC64 BE ones.
With the appropriate changes in SCFB, to use this ioctl to find
out the correct RGB offsets, this fixes wrong colors on Talos II
and Blackbird, when used with their built-in video cards.
Reviewed by: alfredo
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D29000
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
to work with the pmu and tempmon nodes as well as the soc node. This allows
interrupts to work on the pmu and tempmon devices even though we don't have
a driver for the low-power gpc interrupt controller (which is not a problem
because we also don't have support for entering deep power-down modes where
it gets used).
Attach after interrupt controllers, since the attach function tries to
set up an interrupt handler.
Check for the availability of the required firmware early in the attach
code (before allocating resources). If the firmware is not available, set
a static var to remember that, so that if the device is re-probed on later
passes it won't repeatedly try to attach and then complain again about
missing firmware.
- Add CCM driver and clocks implementations for i.MX 8M
- Add GPC driver for iMX8
- Add clock tree for i.MX 8M Quad
- Add clocks support and new compat strings (where required) for existing i.MX 6 UART, I2C, and GPIO drivers
- Enable aarch64-compatible drivers form i.MX 6 in arm64 GENERIC kernel config
- Add dtb/imx8 kernel module with DTBs for Nitrogen8M and iMX8MQ EVK
With this patch both Nitrogen8M and iMX8MQ EVK boot with NFS root up to multiuser login prompt
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D25274
- Configure ipu1_di0 tob e sourced from the VIDEO_PLL(PLL5) and hardcode
frequency to (455000000/3)Mhz. This value, further divided, can yield
frequencies close enough to support 1080p, 720p, 1024x768, and 640x480
modes. This is not ideal but it's an improvement comparing to the only
hardcoded 1024x768 mode.
- Fix memory leaks if attach method failed
- Print EDID when -v passed to the kernel
In the recent dts sync the name of the aips-bus@ changed to bus@. Reflect
this change and add an additional OF_finddevice in fix_fdt_interrupt_data()
and in fix_fdt_iomuxc_data() with bus@ only. Iow, keep the old naming for
compatibility.
Discussed with: ian@
NXP LS1046A contains I2C controller compatible with Vybrid VF610.
Existing Vybrid MVF600 driver can be used to support it. For that purpose
declare driver as ofw_iicbus and add methods associated with ofw_iicbus.
For VF610 add dynamic clock prescaler calculation using clock information
from clock driver and clock frequency requested in device tree.
On the occasion add detach function and add additional error handling
in i2c_attach function.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24361
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
As far as I can tell, these are an artifact of times when linker sets
couldn't be empty, otherwise the kernel build would fail due to unresolved
symbols. hselasky fixed this in r268138, and I've audited the kbd portions
to make sure nothing would blow up due to the empty linker set and
successfully compiled+ran a kernel with no keyboard support at all.
Kill them off now since they're no longer required.
MFC after: 1 week
Delay the attachment of children, when requested, until after interrutps are
running. This is often needed to allow children to run transactions on i2c or
spi busses. It's a common enough idiom that it will be useful to have its own
wrapper.
Reviewed by: ian
Differential Revision: https://reviews.freebsd.org/D21465
The latest imported FDT data defines a node for an iomuxc-gpr device,
which we don't support (or need, right now) in addition to the usual
iomuxc device. Unfortunately, the dts improperly assigns overlapping
ranges of mmio space to both devices. The -gpr device is also a syscon
and simple_mfd device.
At runtime the simple_mfd driver attaches for the iomuxc-gpr node, then
when the real iomuxc driver comes along later, it fails to attach because
it tries to allocate its register space, and it's already partially in
use by the bogus instance of simple_mfd.
This change works around the problem by simply disabling the node for
the iomuxc-gpr device, since we don't need it for anything.
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
This was enumerated with exhaustive search for sys/eventhandler.h includes,
cross-referenced against EVENTHANDLER_* usage with the comm(1) utility. Manual
checking was performed to avoid redundant includes in some drivers where a
common os_bsd.h (for example) included sys/eventhandler.h indirectly, but it is
possible some of these are redundant with driver-specific headers in ways I
didn't notice.
(These CUs did not show up as missing eventhandler.h in tinderbox.)
X-MFC-With: r347984
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
