Commit Graph

52 Commits

Author SHA1 Message Date
Pyun YongHyeon
3c1adb82f9 Add D-Link DFE-520TX (rev. C1) to HARDWARE section.
MFC After:	1 week
2013-01-16 02:22:56 +00:00
Glen Barber
50d922a02e General mdoc(7) and typo fixes.
PR:		167776
Submitted by:	Nobuyuki Koganemaru (kogane!jp.freebsd.org)
MFC after:	3 days
2012-05-12 03:25:46 +00:00
Ulrich Spörlein
0d9deed52c mdoc: drop redundant .Pp and .LP calls
They have no effect when coming in pairs, or before .Bl/.Bd
2010-10-08 12:40:16 +00:00
Pyun YongHyeon
72cfc9a608 Better wording and fix wrong explanation.
Submitted by:	Ben Kaduk ( minimarmot <> gmail dot com )
2010-08-23 00:10:43 +00:00
Pyun YongHyeon
b817ddc741 Document tunable dev.rl.%unit.prefer_iomap 2010-08-22 21:32:48 +00:00
Ruslan Ermilov
aa4a335bae Use the newly brought %U macro. 2010-01-15 16:01:22 +00:00
Warner Losh
b14bf100e9 Document dev.rl.%unit.twister_enable sysctl/tunable.
Submitted by:	Kostik Belousov
2008-11-02 16:51:57 +00:00
Remko Lodder
ee6480fe8b Add the Planex FNW-3603TX card to the list. 2007-11-28 12:00:14 +00:00
Christian Brueffer
a25ecdff1f Xref altq(4) for drivers that support it according to altq(4). 2007-01-30 08:40:04 +00:00
Tom Rhodes
16d78bb878 Work around an apparent mdoc(7) bug.
Spotted by:	marius
Discussed with:	ru
2005-10-07 02:32:16 +00:00
Christian Brueffer
685b8c364e Remove stray comma 2005-08-08 18:24:04 +00:00
Tom Rhodes
90296834d9 Break long lines and kill a few instances of EOL whitespace.
Noticed by:	ru
2005-07-21 05:02:39 +00:00
Tom Rhodes
86e3186efa Add a "Load module on start up" comment, similar to mac_*.4 pages[1].
Quote .Cd and .Nd text.
Bump doc date.

Requested by:	some user through ru
Supported by:	ru, dwmalone, brueffer
2005-07-19 00:26:30 +00:00
Ruslan Ermilov
0227791b40 Expand *n't contractions. 2005-02-13 22:25:33 +00:00
Christian Brueffer
a6c410e72b Xref polling.4 and bump .Dd
MFC after:	3 days
2004-11-24 19:06:43 +00:00
Christian Brueffer
aa1eb2d301 - list D-Link DFE-528TX as supported
- correct whitespace in a few entries
- remove some doubt from the D-Link DFE-538TX entry
- bump .Dd

MFC after:	3 days
2004-11-17 22:51:46 +00:00
Simon L. B. Nielsen
022d39524e - Add a HARDWARE section which lists supported devices.
- Fix a few mdoc(7) markup / style nits when I'm here anyway.
2004-08-15 21:59:15 +00:00
Ruslan Ermilov
5203edcdc5 Mechanically kill hard sentence breaks and double whitespaces. 2004-07-03 18:29:24 +00:00
MIHIRA Sanpei Yoshiro
ec0a06b8b3 add support BUFFALO(Melco INC.) LPC-CB-CLX(CardBus)
http://buffalo.melcoinc.co.jp/products/catalog/item/l/lpc-cb-clx/index.html
(in Japanese)
2004-05-03 09:54:51 +00:00
Bruce A. Mah
2979b13acd Remove trailing commas from device list. 2003-11-08 17:31:49 +00:00
Bruce A. Mah
32fc2ffd63 Add SOHO(PRAGMATIC) UE-1211C from the pc98 hardware notes. 2003-11-08 17:30:42 +00:00
Bruce A. Mah
e25d92c441 Capitalize "Ethernet" and "Fast Ethernet" consistently. No other
content changes.
2003-11-08 17:29:58 +00:00
Bruce A. Mah
abe008a0c9 Sort devices. In the process, remove a duplicate entry for the Accton
EN1207D.  No other content changes.
2003-11-08 17:28:31 +00:00
Hiten Pandya
b654922dc1 Update supported Ethernet Controllers as per the Hardware Notes.
PR:		docs/55559
Submitted by:	Lukas Ertl <l.ertl@univie.ac.at>
MFC after:	3 days
2003-09-14 23:38:42 +00:00
Bill Paul
a94100fa9b Take the support for the 8139C+/8169/8169S/8110S chips out of the
rl(4) driver and put it in a new re(4) driver. The re(4) driver shares
the if_rlreg.h file with rl(4) but is a separate module. (Ultimately
I may change this. For now, it's convenient.)

rl(4) has been modified so that it will never attach to an 8139C+
chip, leaving it to re(4) instead. Only re(4) has the PCI IDs to
match the 8169/8169S/8110S gigE chips. if_re.c contains the same
basic code that was originally bolted onto if_rl.c, with the
following updates:

- Added support for jumbo frames. Currently, there seems to be
  a limit of approximately 6200 bytes for jumbo frames on transmit.
  (This was determined via experimentation.) The 8169S/8110S chips
  apparently are limited to 7.5K frames on transmit. This may require
  some more work, though the framework to handle jumbo frames on RX
  is in place: the re_rxeof() routine will gather up frames than span
  multiple 2K clusters into a single mbuf list.

- Fixed bug in re_txeof(): if we reap some of the TX buffers,
  but there are still some pending, re-arm the timer before exiting
  re_txeof() so that another timeout interrupt will be generated, just
  in case re_start() doesn't do it for us.

- Handle the 'link state changed' interrupt

- Fix a detach bug. If re(4) is loaded as a module, and you do
  tcpdump -i re0, then you do 'kldunload if_re,' the system will
  panic after a few seconds. This happens because ether_ifdetach()
  ends up calling the BPF detach code, which notices the interface
  is in promiscuous mode and tries to switch promisc mode off while
  detaching the BPF listner. This ultimately results in a call
  to re_ioctl() (due to SIOCSIFFLAGS), which in turn calls re_init()
  to handle the IFF_PROMISC flag change. Unfortunately, calling re_init()
  here turns the chip back on and restarts the 1-second timeout loop
  that drives re_tick(). By the time the timeout fires, if_re.ko
  has been unloaded, which results in a call to invalid code and
  blows up the system.

  To fix this, I cleared the IFF_UP flag before calling ether_ifdetach(),
  which stops the ioctl routine from trying to reset the chip.

- Modified comments in re_rxeof() relating to the difference in
  RX descriptor status bit layout between the 8139C+ and the gigE
  chips. The layout is different because the frame length field
  was expanded from 12 bits to 13, and they got rid of one of the
  status bits to make room.

- Add diagnostic code (re_diag()) to test for the case where a user
  has installed a broken 32-bit 8169 PCI NIC in a 64-bit slot. Some
  NICs have the REQ64# and ACK64# lines connected even though the
  board is 32-bit only (in this case, they should be pulled high).
  This fools the chip into doing 64-bit DMA transfers even though
  there is no 64-bit data path. To detect this, re_diag() puts the
  chip into digital loopback mode and sets the receiver to promiscuous
  mode, then initiates a single 64-byte packet transmission. The
  frame is echoed back to the host, and if the frame contents are
  intact, we know DMA is working correctly, otherwise we complain
  loudly on the console and abort the device attach. (At the moment,
  I don't know of any way to work around the problem other than
  physically modifying the board, so until/unless I can think of a
  software workaround, this will have do to.)

- Created re(4) man page

- Modified rlphy.c to allow re(4) to attach as well as rl(4).

Note that this code works for the sample 8169/Marvell 88E1000 NIC
that I have, but probably won't work for the 8169S/8110S chips.
RealTek has sent me some sample NICs, but they haven't arrived yet.
I will probably need to add an rlgphy driver to handle the on-board
PHY in the 8169S/8110S (it needs special DSP initialization).
2003-09-08 02:11:25 +00:00
Bill Paul
e7b9ab3aaa Add support for a bunch of Microsoft networking products:
- MN-110 10/100 USB ethernet (ADMtek Pegasus II, if_aue)
- MN-120 10/100 cardbus (ADMtek Centaur-C, if_dc)
- MN-130 10/100 PCI (ADMtek Centaur-P, if_dc)

Also update dc(4) man page to mention support for MN-120 and MN-130.
2003-07-10 18:43:17 +00:00
Tom Rhodes
071d726d01 Xref miibus(4). 2003-02-15 17:12:53 +00:00
Tom Rhodes
01f5fdee5c Restore most (90%) of the text I removed in my previous commit. Remove the
part about spelling and grammar.

Discussed with:	-developers
2002-11-06 18:58:02 +00:00
Tom Rhodes
ad727d7c98 Remove Realtek discriminating comments from the rl(4) manual page.
This leaves us with 'just the facts'

PR:	31271
2002-11-06 03:53:08 +00:00
Ruslan Ermilov
7d1deb1f04 Record the dependency on "device miibus". 2002-05-30 11:47:19 +00:00
Murray Stokely
6c412638de Add the Farallon NetLINE 10/100 PCI to the list of cards supported by
rl(4).

PR:		docs/31270
Submitted by:	Gary W. Swearingen <swear@blarg.net>
2001-11-05 09:17:23 +00:00
Jens Schweikhardt
c1f3e4bf21 Removed whitespace at end-of-line; no content changes. I simply did
cd src/share; find man[1-9] -type f|xargs perl -pi -e 's/[ \t]+$//'

BTW, what editors are the culprits? I'm using vim and it shows
me whitespace at EOL in troff files with a thick blue block...

Reviewed by:	Silence from cvs diff -b
MFC after:	7 days
2001-07-14 19:41:16 +00:00
Ruslan Ermilov
3d45e180f4 mdoc(7) police: removed HISTORY info from the .Os call. 2001-07-10 15:31:11 +00:00
Ruslan Ermilov
eb0838029f mdoc(7) police: normalize .Nd. 2001-04-18 15:54:10 +00:00
Jeroen Ruigrok van der Werven
7c63796828 Preceed/preceeding are not english words. Use precede or preceding. 2001-02-18 10:25:42 +00:00
Ruslan Ermilov
d0353b836e mdoc(7) police: split punctuation characters + misc fixes. 2001-02-01 16:38:02 +00:00
Archie Cobbs
95d7878ce0 Move netgraph node type man pages from section 8 to section 4. 2000-05-04 17:40:13 +00:00
Sheldon Hearn
4e86fcacf6 Remove more single-space hard sentence breaks. 2000-03-02 14:54:02 +00:00
Sheldon Hearn
6d249eee27 Remove single-space hard sentence breaks. These degrade the quality
of the typeset output, tend to make diffs harder to read and provide
bad examples for new-comers to mdoc.
2000-03-01 14:50:24 +00:00
Archie Cobbs
5fbeb2a289 Add a reference to ng_ether(8). 2000-01-25 20:34:43 +00:00
Jeroen Ruigrok van der Werven
b9781e2007 Second round of config related changes to the manpages.
device blah0 -> device blah for PCI devices and busses.
2000-01-23 16:13:26 +00:00
Alexey Zelkin
474fc32b33 * remove i386 specific mark
* some style and syntax fixes
* some duplicated $FreeBSD$ tags removed
1999-11-15 23:14:32 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
Mike Pritchard
def37e7c68 Various man page cleanup:
- Sort xrefs
- FreeBSD.ORG -> FreeBSD.org
- Be consistent with section names as outlined in mdoc(7).
- Other misc mdoc cleanup.

PR:		doc/13144
Submitted by:	Alexey M. Zelkin <phantom@cris.net>
1999-08-15 10:48:36 +00:00
Bill Paul
92d75a9bb8 Fix recurring typo: fine -> file 1999-03-25 00:52:44 +00:00
Bill Paul
6a5359cac2 Correct the name of the SMC 1211-TX: it's called the EZ Card 10/100 PCI,
not EtherEZ.
1998-12-24 18:52:47 +00:00
Bill Paul
f769cca5eb Un-revert typo fix (fauled -> failed). This is what I get for not
keeping my local RCS files in sync with the rest of the world.

Caught red-handed by: bde
1998-12-07 18:14:30 +00:00
Bill Paul
989c9647f2 if_rl.c: make a small tweak to properly handle the Accton MPX 5030/5038
as a RealTek 8139
if_rlreg.h: use bus_space_read_X() in CSR_READ_X() macros instead of
            directly calling inb()/outb() etc...
rl.4 + RELNOTES.TXT: mention that SMC EtherEZ PCI 1211-TX is supported
                     by the RealTek driver
1998-12-07 00:35:06 +00:00
Robert Nordier
d3c1cd6fe7 Fix typo (fauled) 1998-12-05 09:31:25 +00:00
Bill Paul
bb2ce8f34e Mention in the man page that the Accton 1207D adapter is supported. 1998-11-18 21:05:11 +00:00