namely uuidgen(1), uuidgen(2) and uuid(3), the following division
has been choosen:
uuidgen(1) A description of the command line utility,
and other user oriented UUID information.
uuidgen(2) A mostly technical description of UUIDs.
uuid(3) A description of the functions and other
programmer oriented UUID information.
According to the division: add more technical contents.
Contributed by: Hiten Pandya <hiten@uk.FreeBSD.org>
Edited and enhanced: marcel
always to the first 16 sectors of the disk. The firmware reads the boot
code from a partition, defaulting to 'a' if none is specified, which only
corresponds to the first 16 sectors of the disk if 'a' is first. Solaris
often makes the swap partition first, instead of the root partition, and
users expect to be able to do the same with freebsd as well. This also
allows one to temporarily boot from another partition if the boot block
on the root partition gets scrambled somehow.
o Remove all code guarded by !defined(__ia64__). This file is
specifically written for ia64,
o Handle the case when read_block() or write_block() fails. We
don't want sysinstall(8) to signal a thumbs-up on error,
o Set the starting (cyl,hd,sect) triple to 0xFFFFFF when either
bios_hd or bios_sect is zero or the LBA us not representable
with the triple. In that case automaticly initialize the
ending triple with 0xFFFFFF as well,
o Reindent Write_Int32() as it was different than the rest of
the file,
o Remove some unused variables that appeared to be used but
were effectively useless.
o Plug a memory leak: The second timne we read the MBR, we write
out a modified block, but didn't free the memory after writing.
o Replace d1->sector_size with 512 when we read/write the MBR.
We ignore the sector size in cases we shouldn't but adhered to
it in cases it would be wrong if the sector_size wasn't 512.
This file should eventually be rewritten to write out a GPT. For
now, a MBR will do...
to be static for 5.0. I may remove this for 5.1 or 5.2. No more
binaries or libarires will be generated with __sF starting as of
yesterday. Originally the plan had been to eliminate this for 5.0,
but we didn't get the __std{in,out,err}p changes merged into -stable
until yesterday (rather than in September 2001 like it should have
been). Given that didn't happen on time, we can't do the other part
of the scheme now.
# Please do not change this without talking to me first.
to use the same start condition as the i386 version. However, since
Alpha's only have one fake "slice" from sysinstall's perspective we don't
need to use a loop, but can just write out the BSD label in the first
fake "slice".
the page myself. The new language is more accurate than what was there
before, but the most accurate way of describing the funcionality eludes
me.
PR: kern/33904
MFC after: 1 month
of heads end the number of sectors per track. If there's an obvious
insanity (heads and sectors are both zero or the media size is not
an integral multiple of heads times sector) we set the number of
cylinders to zero.
1. When the parition type is not an integer, try to parse the type
as an UUID. If that succeeds, map the UUID to chunk_e.
2. For GPT partitions, pass the type constructed in point 1 above
to Add_Chunk.
While here, fix the MBREXT case by only checking if the first 3
characters are MBR. This avoids duplication.
the data value returned by kevent()'s EVFILT_READ filter on non-TCP
sockets accurately reflects the amount of data that can be read from the
sockets by applications.
PR: 30634
Reviewed by: -net, -arch
Sponsored by: NTT Multimedia Communications Labs
MFC after: 2 weeks
* Fix typos in rwlock stubs.
* Add pthread_XXX counterparts to the _pthread_XXX stubs which libraries
like libX11 can use to ensure thread-safety without requiring the use
of a thread library.
Submitted by: Terry Lambert (pthread_cond_broadcast)
Reviewed by: deischen
HUGE_VAL is not properly aligned on some architectures. The previous
fix now works because the two versions of 'math.h' (include/math.h
and lib/msun/src/math.h) have since been merged into one.
PR: bin/43544
functions is expected for uuidgen(1), mca(8) and gpt(8). Given the
generic use of UUIDs beyond the scope of the DCE 1.1 specification,
visibility of the data structure at all levels of the machine,
including firmware and the wish to not create a permanent build-
time FreeBSD-ism for DCE compliant applications by creating a new
library, it was decided that libc would be the least inappropriate
place. Also, because the UUID functions live in libc under IRIX as
well, we have maximized our portability and left as many options
open as possible.
This implementation introduces an extension not found in the
specification: the status parameter is allowed to be a NULL-
pointer. The reason for introducing the extension is because
the status is almost never of any use.
The manpage that's part of this commit is a minimal place-holder
and is further fleshed-out in the near future.
Approved by: re@
Contributed by: Hiten Mahesh Pandya <hiten@unixdaemons.com>
Sponsored by: marcel :-)
Tested on: alpha, i386, ia64
Don't gratuitously pipe thru a cat(1) if NODOCCOMPRESS.
Only create _stamp.extra when necessary.
Get rid of SOELIMPP and OBJS.
Use Groff version of soelim(1); we need its -I option
for the following to work.
Don't needlessly chdir to SRCDIR. Only a few documents
need CD_HACK, and those that need it either use refer(1)
or .PSPIC macro which internally uses the .psbb call.
This significantly rewamps libdisks discovery of existing disk
layout.
Please send me reports if this does not work as expected on
i386 or sparc64 platforms.
I need to sort out alpha, pc98 and ia64 (in that order) before
testing on those platforms make a lot of sense.
Belived to work for: i386 sparc64
Unknown state: pc98 alpha ia64
_fetch_writev() to incorrectly report EPIPE in certain cases.
Also fix a number of const warnings by using __DECONST(), plus a signed /
unsigned comparison by casting the rhs to ssize_t.
Submitted by: fenner, Craig Rodrigues <rodrigc@attbi.com>
return -1 regardless of what s points to, mbtowc(&w, s, 1) sets w to a
null wide character when s points to a null byte. This seems to be closer
to what most other implementations do, but the C99 standard contradicts
itself for these cases.
whether a named utility should behave in FreeBSD 4.x-compatible mode
or in a standard mode (default standard). The configuration is done
malloc(3)-style, with either an environment variable or a symlink.
Update expr(1) to use this new interface.
Implement new sysconf keys. Change the implenentation of
_SC_ASYNCHRONOUS_IO in preparation for the next set of changes.
Move some limits which had been in <sys/syslimits.h> to <limits.h> where
they belong. They had only ever been in syslimits.h to provide for the
kernel implementation of the CTL_USER MIB branch, which went away with
newsysctl years ago. (There is a #error in <sys/syslimits.h> which I
will downgrade in the next commit.)
error, only report an error if no data was read at all (unless len was
0 to start with). Otherwise, the final read of practically any transfer
will end in a fatal error.
the SSL case, it is no different from the old _fetch_write(), but in the
non-SSL case it uses writev(2) to send the entire vector as a single
packet (provided it can fit in one packet). Implement _fetch_write()
and _fetch_putln() in terms of _fetch_writev().
This should improve performance in the non-SSL case (by reducing protocol
overhead) and solve the problem where too-smart-for-their-own-good
firewalls reject FTP packets that do not end in CRLF.
PR: bin/44123
Submitted by: fenner
not initialized before use, and _http_growbuf() did not return a value
on success.
Reported by: Peter Edwards <pmedwards@eircom.net>
MFC after: 2 weeks
symptoms: make timeouts and short transfers fatal, and set errno to an
appropriate value (ETIMEDOUT for a timeout, EPIPE for a short transfer).
MFC after: 2 weeks
extenston function. It supposed to provide facility to get already created
thread's attributes. Looks like it's last thing we need to make JDK's Hotspot
building without requirement to have source tree.
Reviewed by: deischen
MFC after: 3 days
- port range check need to be done before htons. from deraadt
- %d/%u audit
- correct bad practice in the code - it uses two changing variables
to manage buffer (buf and buflen). we eliminate buflen and use
fixed point (ep) as the ending pointer.
- use snprintf, not sprintf
- pass correct name into q.name. from lukem@netbsd
- sync comment
Obtained from: KAME
MFC after: 1 week
closed through _fetch_close() which is the only one who knows the connection
REALLY was closed (since ref -> 0). However, FTP keeps its own local
cached_connection and checks if it is valid by comparing it to NULL. This
is bogus since it may have been freed elsewhere by _fetch_close().
This change checks if we are closing the cached_connection and the ref is 1
(soon to be 0). If so, set cached_connection to NULL so we don't
accidentally reuse it. The REAL fix should be to move connection caching
to the common.c level (_fetch_* functions) and NULL the cache(s) in
_fetch_close(). Then all layers could benefit from caching.
linking.
* Fix disorder in the SEE ALSO sections of aio_*(2).
* Remove unnecessary cross-references from the SEE ALSO sections of
aio_*(2); config(8), kldload(8) and kldunload(8) are cross-referenced
from aio(4).
* Remove the KERNEL OPTIONS sections from aio_*(2), now that these
pages cross-reference aio(4), which contains suitable kernel linking
reference material.
more efficient. The problem with the previous implementation was that it
calculated the length of the first argument ("big") with wcslen() when
it was not necessary.
to be passed. Point this out in a warning notice, which will eventually
go away, sometime between now and -RELEASE.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
remove CHUNK_BSD_COMPAT, it was a bad idea, and now its gone.
remove DOSPTYP_ONTRACK, missed in OnTrack removal commit.
unifdef -DHAVE_GEOM
make tst01 compile again.
two major bugs:
- off-by-one overflow when the length of the source string exceeds or
equals the destination buffer size.
- old version was not padding the destination buffer with null wide chars
if the user has a 'label' entry in their login class. If so, attempt
to set that label on the process as part of the credential setup. If
we're unable to parse the label, or unable to set the label, fail.
In the future, we may also want to warn if a label is set but the
kernel doesn't support MAC.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
This removes a lot of complexity, since we basically just reserve
space on a retrieval of a label, and pass around strings. Two new
elements: (1) consumers of the API must now declare what label
elements they are interested in retrieving, or (2) rely on the default
provided in a new configuration file, mac.conf.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Constify some things.
Staticize some things.
Remove some unused things.
Prototype some things.
Don't install a gazillion man-pages links.
Drop support for ON-TRACK disk-manager.
memory while mapping a virtual address to a physical address.
This allows us to work with virtual addresses for page tables,
provided it doesn't cause infinite recursion. Currently all
page tables are direct mapped.
to bring in the new MAC label management API. With the new API
revision, we have only policy-agnostic code in libc and the base
kernel.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
o fillin media s/h/c fields from new XML phk just added; need this because
sysinstall uses them in the fdisk look-alike
o add new tags to xml parser
o cleanup parser a touch; remove unused tags and move tag parsing stuff to
a table to simplify future additions
o redo callback to pass 64-bit values since mediasize overflows u_int32_t
o loosen parsing sanity checks a touch to deal with new xml we must handle
o move sector size probing to non-geom handling since we now get it from xml
o remove WHOLE_DISK_SLICE buggery now that we get mediasize from xml
get the xml configuration for the devices and "parse" the information to
get what's needed
o replace #ifdef DEBUG constructs with DPRINT/DPRINTX to make the code more
readable
Note the xml "parser" is very very hackish and should be replaced with a
real one. This one was done to be very small and special-purpose; don't
think about copying it elsewhere.
Approved by: phk
group membership requirement if the group has no explicit members listed
in /etc/group. By default, this group is the wheel group; setting this
flag restores the default BSD behavior from 4.x.
Reviewed by: markm
Requested by: various
Sponsored by: DARPA, Network Associates Laboratories
of a file descriptor has NULL entries, so don't dereference the table entries
to get the owners ever -- don't print the owners when processing a thread_dump
request as a result of SIGINFO.
Reviewed by: deischen
o memory wasn't reclaimed in certain cases
o add more msgs under #ifdef DEBUG
o rewrite tangle of for loops for clarity
NB: Open_Disk should redo how it malloc's memory so the caller can free
everything. Documentation says the caller can free the disk list to
reclaim everything but this leaks the indirect strings. Fixing this
is simple for the sysctl case but adds complexity to the fallback,
non-sysctl, case.
maximum number of bytes that may be stored in the array, not the maximum
number of wide characters to read. The wording of the standard unfortunately
does not make this clear.
the compatibility library libcompat.
- Add new implementations of lsearch() and lfind() which conform to
IEEE Std 1003.1-2001 to libc. Add a new manual page for them and
add them to the makefile.
- Add function prototypes for lsearch() and lfind() to the search.h
header.
page from the compatibility library.
- Add new implementations of insque() and remque() which conform to
IEEE Std 1003.1-2001 to libc. Add a new manual page for them and
connect them to the build.
- Add the prototypes of insque() and remque() to the search.h
header.
in the UDP RPC client code. As a side-effect, this fixes some bugs
that might prevent the RPC call from ever timing out for example
if the server keeps responding with the wrong xid. This could
probably be simplified further by using the EVFILT_TIMER filter.
(at least the French ones), a memory leak upon successful termination, a
pointer arithmetic error causing heap corruption, and an off-by-one bug
causing incorrect amounts of padding at the right of the value.
"UTF2" method. Although UTF-8 and the old UTF2 encoding are compatible
for 16-bit characters, the new UTF-8 implementation is much more strict
about rejecting malformed input and also handles the full 31 bit range
of characters.
international monetary values: int_p_cs_precedes, int_n_cs_precedes,
int_p_sep_by_space, int_n_sep_by_space, int_p_sign_posn, int_n_sign_posn.
This should not break existing binaries or LC_MONETARY data files.
Reviewed by: ache
MFC after: 1 month
and getipnodeby*() thread-safe.
Our res_*() is not thread-safe. So, we share lock between
getaddrinfo() and getipnodeby*(). Still, we cannot use
getaddrinfo() and getipnodeby*() in conjunction with other
functions which call res_*().
Requested by: many people
the FPU state on receiving and returning from a signal.
The FPU save and restore macros are no longer needed, but
remain defined in case we need to use them again (something
else breaks). They'll be removed permanently once new
syscalls are added to handle the new i386 ucontext size.
some deliberation the name "libbsdxml" was chosen since it conveys the two
most important attributes: "Private to FreeBSD" and "XML".
Add a skeleton man-page to give the credit and point for further
documentation. (If somebody wants to write a true mdoc manpage for
this I am sure both the eXpat people and I will be grateful).
(Still not connected to the build)
`sigprocmask', `sigaltstack', and `sigwait' as well as to the
prototypes of the apparantly unimplemented functions `sigtimedwait'
and `sigwaitinfo'. This complies with IEEE Std 1003.1-2001.
ceased to be useful when the number of "special processes" went from 3
to one per device. I considered replacing it with a "kernel threads"
section, but this seemed like the wrong place for that.
PR: 40969
doesn't do this, and it wouldn't be very useful if it did, since the
caller supplies us with that number.
PR: 41329
Submitted by: Michael Galassi <nerd@xyz.com>
one into the latter and removed the former.
This works around the bug that some broken Makefiles add -I.../src/include
to CFLAGS, resulting in the old math.h being preferred and differences
between the headers possibly being fatal.
The merge mainly involves declaring some functions as __pure2 although
they are not yet all strictly free of side effects.
PR: 43544
Peter had repocopied sys/disklabel.h to sys/diskpc98.h and sys/diskmbr.h.
These two new copies are still intact copies of disklabel.h and
therefore protected by #ifndef _SYS_DISKLABEL_H_ so #including them
in programs which already include <sys.disklabel.h> is currently a
no-op.
This commit adds a number of such #includes.
Once I have verified that I have fixed all the places which need fixing,
I will commit the updated versions of the three #include files.
Sponsored by: DARPA & NAI Labs.
userland. If someone wants to implement a backup p_siglist in the kernel
for compatability and to export one could. For now, just tell KVM to hand
an empty signal set off to the userland.
to/from a ucontext when a thread is interrupted by a signal.
This will be removed when a proper fix is made in the kernel
to save/restore the FP state without breaking the ABI.
-fomit-frame-pointer is not used). This is mostly moot for -current
because gcc-3 does the alignment (slightly incorrectly) in main().
This patch is intended for easy MFC'ing and should be backed out in
-current soon since it causes compiler warnings and better fixes are
possible in -current. The best fix is to do nothing here and wait for
gcc to do stack alignment right. gcc-3 aligns the stack in main(), but
does it too late for main()'s local variables and too late for anything
called before main(). A misaligned stack is now more than an efficiency
problem, since some SSE instructions in some or all (hardware)
implementations trap on misaligned operands even if alignment checking
is not enabled.
PR: 41528:
Submitted by: NIIMI Satoshi <sa2c@sa2c.net> (original version)
MFC after: 3 days
Although there was nothing wrong with getwc() and putwc(), getwchar()
and putwchar() assumed that <stdio.h> had been included before <wchar.h>,
which is not allowed by the standard.
va_end closer to the __vfprintf() call, free the buffer when __vfprintf()
fails and don't bother trying to shrink the buffer with realloc() before
returning it.
Submitted by: bde
addition to existing authentication. No change to the existing
APIs to preseve both binary and API compatibility, so I am not
inclined to bump the library version number unless someone thinks
this is necessary.
Submitted by: Paul Fraley <fraley@juniper.net>
MFC after: 2 weeks
- Sort local variable declarations.
- Protect a hand-formatted comment from indent(1).
- Use portable casts, even though this is machine-dependant code.
- Remove extraneous blank lines.
- Remove trailing newline.
- Use sigdelset(3), not SIGDELSET(9).
Requested by: bde
Use the correct constants directly from sysconf() rather than calling
sysctl() to tell us the (still compiled-in) value. Leave the CTL_POSIX1B
stuff alone for now (but I'd like to see this replaced with a single
structure returning all of the relevant information).
Implement all of the keys from 1003.1-2001 that we can. Ensure that
the build will break if someone redefines an option constant to zero
without implementing the necessary presence-detection logic here.
(4 of 5)
hack, thereby allowing future extensions to the structure (e.g., for extended
attributes) without rebreaking the ABI. FTSENT now contains a pointer to the
parent stream, which fts_compar() can then take advantage of, avoiding the
undefined behavior previously warned about. As a consequence of this change,
the prototype of the comparison function passed to fts_open() has changed
to reflect the required amount of constness for its use. All callers in the
tree are updated to use the correct prototype.
Comparison functions can now make use of the new parent pointer to access
the new stream-specific private data pointer, which is intended to assist
creation of reentrant library routines which use fts(3) internally.
Not objected to in spirit by: -arch
o Added dd_pnpinfo, dd_location, dd_devflags, dd_flags and dd_state
o Copy/initialize these as necessary.
o Document the changes to the interface in devinfo.3.
and wide characters. These were already documented in the manual page,
with an entry mentioning that they were not implemented yet. The XSI
%S and %C synoyms have not been added.
or "POSIX", other European locales). Use __sgetc() and __sputc() where
possible to avoid a wasteful lock and unlock for each byte and to avoid
function call overhead.
get applications to move to the ISO C interfaces as well as have the
freedom to replace the rune interfaces with ones that support stateful
conversions some time in the future.
here in terms of mbrtowc(), wcrtomb(), and the single-byte I/O functions.
The rune I/O functions are about to become deprecated in favour of the
ones provided by ISO C90 Amd. 1 and C99.
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
The new libpthread will provide POSIX threading support using KSE.
These files were previously repo-copied from src/lib/libc_r.
Reviewed by: deischen
Approved by: -arch
after adding __FBSDID().
Garbage-collected kvm_readswap(). This was once used by kvm_uread(), but
kvm_uread() now just reads /proc/<pid>/mem and procfs hopefully handles
swapped out pages.
next step is to allow > 1 to be allocated per process. This would give
multi-processor threads. (when the rest of the infrastructure is
in place)
While doing this I noticed libkvm and sys/kern/kern_proc.c:fill_kinfo_proc
are diverging more than they should.. corrective action needed soon.
KAME did the modification only to _dns_getaddrinfo(). However,
it is not sufficient, and res_queryN() should be modified, too.
So, I did same modification to res_queryN().
Obtained from: KAME
insure enough space is available for the response, or be prepared
to resize the buffer and retry as necessary.
Do the conservative thing and make sure enough space is available.
Reviewed by: silence on freebsd-audit
When it is called directly, gcc is smart enough to generate inline
code for it, which is why it wasn't noticed before that it was missing.
fabs() would probably better fit into libm, but it has traditionally been
in libc on FreeBSD, so there is probably software around that makes
assumptions about this by now.
of pointers to strings. These two arrays were fixed to the same size, but one
had an implicit zeroed trailer element, which was unused because the size was
used up by the ones before said zeroed trailer element. So the unused limb was
chopped off the over-sized-but-not-over-sized array, and everyone lived happily
ever after.
instead of on startup. This fixes binary compatibility of dynamically
linked binaries from before the signal code move.
Suggested by: wollman (a long time ago)
than 32 bits. It was trying to figure out things like the day of week
of when time_t is roughly 2^62 etc. Make a better guess for the starting
point for the binary search that works on both 32 and 64 bit types. I have
been using this for a while now.
bcopy(3) functions are prototyped in <strings.h> and not in
<string.h> anymore.
- Add a sentence about that to the respective HISTORY sections.
In the C source files:
- Include <string.h> or <strings.h> depending on what function
is to be compiled.
- Use ANSI-C function definitions.
.In string.h
with
.In strings.h
and adding a sentence to the HISTORY section.
- Use an ANSI-C function definition.
- Include <strings.h> instead of <string.h>.
- Apply style(9): Put a space after return keywords.
in the ANSI-C format.
- Change the code a bit to hopefully save some cycles.
I.e. (simplified) change
a = b + 1;
while (--b & 0x7)
/* ... */
to
a = b;
for (; b & 0x7; b--)
/* ... */
and
while (--a >= 0)
/* ... */
to
for (; a > 0; a--)
/* ... */
- Equip two function arguments of swab() with the 'restrict'
type qualifier in form of the '__restrict' macro. This is
specified by POSIX.1-2001.
<strings.h> as the associated header file.
The prototypes have been moved there from <string.h> because
POSIX.1-2001 said so.
- Conditionally include either <strings.h> or <string.h> based
on whether the [r]index() or str[r]chr() functions are
compiled, respectively.
- Style(9) tells us to
- put a space after the return keyword
- to check for a NUL character without using the ! operator.
- use NULL instead of (type *)NULL where the compiler knows
the type.
Apply these rules.
- Rather use ANSI-C function definitions than K&R ones.
- For index(3), correct second function argument's type; it was
declared to be a `const char' before and is now an `int'.
is <strings.h> and not <string.h> anymore.
- Tell the reader about this change in the HISTORY section.
- Switch to use an ANSI-C function definition.
- Include <strings.h> instead of <string.h> in the source file.
the prototypes for both functions are now in the <strings.h>
header, as required by IEEE Std 1003.1-2001.
- Add one sentence about that in the HISTORY section.
- Include <strings.h> in the source file to have the prototypes
in scope when the _ANSI_SOURCE macro is defined.
at file flags and replace it with functions that will avoid null
pointer checks.
MFC to be done by archie ;-)
PR: 42100
Reviewed by: archie, robert
MFC after: 3 days
file descriptor bit if poll() returns POLLERR, POLLHUP, or POLLNVAL.
Othewise, it's possible for select() to return successfully but
with no bits set.
Reviewed by: deischen
MFC after: 3 days
PR: bin/42175
on behalf of a thread, we should check the POLLERR, POLLHUP, and
POLLNVAL flags as well to wake up the thread in these cases.
Suggested by: deischen
MFC after: 3 days
to fail needlessly if a reverse DNS lookup of the IP address didn't
come up with a hostname. As a comment in the code clearly stated,
the "damn hostname" was looked up only for the purpose of netgroup
matching. But if that lookup failed, the function bailed out
immediately even though in many cases netgroup matching would not
be used.
This change marks the hostname as unknown but continues. Where
netgroup matching is performed, an unknown hostname is handled
conservatively. I.e., for "+@netgroup" (accept) entries an unknown
hostname never matches, and for "-@netgroup" (reject) entries an
unknown hostname always matches.
In the lines affected (only), I also fixed a few bogus casts. There
are others, and in fact this entire file would be a good candidate
for a cleanup sweep.
Reviewed by: imp (wearing his flourescent yellow Security Team cap)
MFC after: 2 days
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif
Concept by: bde
Reviewed by: jake, obrien
disklabel.h; broken originally by 1.87 of sys/disklabel.h, which
made the split between DKTYPENAMES and FSTYPENAMES.
Someone who knows disklabel.c: do we still need DKTYPENAMES to be
defined here now?
supplied buffer in case the size of it was equal to
the number of characters the converted address consumed.
The bug occurred when converting an AF_INET address.
- Remove the SPRINTF macro and use sprintf instead.
- Do not do string formatting using sprintf(3) and a
temporary buffer which is copied when the supplied
buffer provides enough space. Instead, use snprintf(3)
and the real destination buffer, thus avoid the copy.
Reported by: Stefan Farfeleder <e0026813@stud3.tuwien.ac.at> (1)
PR: misc/41289
definitions of the functions that convert strings to numbers
and are defined by IEEE Std 1003-1.2001.
- Use ANSI-C function definitions for all of the functions
mentioned above plus strtouq and strtoq.
- Update the prototypes in the manual pages.
public prototypes of setbuf(3) and setvbuf(3) using the
'__restrict' macro from <sys/cdefs.h> to be compliant with
IEEE Std 1003.1-2001.
- Replace the K&R with ANSI-C function definitions.
- Bring the manual page up-to-date.
strftime(3) for IEEE Std 1003.1-2001 compliance and remove
excessive usage of the 'const' qualifier that was neither
present in the prototype in the publice header, nor in the
local prototype just above the function definition.
- Replace the K&R function definition with a ANSI-C one.
- Update the prototype of strftime(3) in its manual page.
concatenation and copy functions using the '__restrict' macro.
This is to satisfy IEEE Std 1003-1.2001.
- Use ANSI-C function definitions.
- Add the 'restrict' keyword to the manual pages, too.
to the function definition of strxfrm(3) in form of our
'__restrict' macro.
- Use an ANSI-C function definition for strxfrm(3).
- Change the manual page accordingly.
of our __restrict macro to the prototypes and function
definitions of inet_pton and inet_ntop.
- Use ANSI-C function argument lists.
- Adjust the prototypes in the manual page.
to cause bugs when gcc is more aggressively optimising things.
There are still problems with dtoa mentioned in the PR - maybe
Dan could suggest a patch.
PR: 40209
Submitted by: Dan Lukes <dan@obluda.cz>
Approved by: bde
MFC after: 2 weeks
(unless someone tries to use libufs support functions without using
_fillout or _ctor to construct a uufsd.)
Obtained from: jmallett_libufs Perforce branch.
(I skipped those in contrib/, gnu/ and crypto/)
While I was at it, fixed a lot more found by ispell that I
could identify with certainty to be errors. All of these
were in comments or text, not in actual code.
Suggested by: bde
MFC after: 3 days
- Make getvfsbyname() take a struct xvfsconf *.
- Convert several consumers of getvfsbyname() to use struct xvfsconf.
- Correct the getvfsbyname.3 manpage.
- Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the
kernel, and rewrite getvfsbyname() to use this instead of the weird
existing API.
- Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist
sysctl.
- Convert a vfsload() call in nfsiod.c to kldload() and remove the useless
vfsisloadable() and endvfsent() calls.
- Add a warning printf() in vfs_sysctl() to tell people they are using
an old userland.
After these changes, it's possible to modify struct vfsconf without
breaking the binary compatibility. Please note that these changes don't
break this compatibility either.
When bp will have updated mount_smbfs(8) with the patch I sent him, there
will be no more consumers of the {set,get,end}vfsent(), vfsisloadable()
and vfsload() API, and I will promptly delete it.
#define EDOFUS 88 /* Programming error */
This can be used to signal error situations which indicate that the
program logic or assumptions is deficient.
label updates. Biba and MLS already supported this. This permits the
userland library to submit relative updates on MAC labels, rather
than submitting an entire label to replace the current label. This
also requires changes to the MAC modules, which are forthcoming.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
variables. Both symbols are set to the same value by the linker,
and _end symbol has less chances to clash with application defined
global symbols.
alpha, ia64 and sparc64 ports already use _end, i386 is now
consistent with them.
Reviewed by: bde
Approved by: obrien
Reported by: pirzyk
currently cached data. It allows a number of nice things, like: removing
fallback code from single locale loading, remove memory leak when LC_CTYPE
data loaded again and again, efficient cache use, not only for
setlocale(locale1); setlocale(locale1), but for setlocale(locale1);
setlocale("C"); setlocale(locale1) too (i.e. data file loaded only once).
towlower() and towupper() required by ISO C90 Amd. 1.
iswascii(), iswhexnumber(), iswideogram(), iswnumber(), iswphonogram(),
iswrune() and iswspecial() have also been implemented for consistency
with the BSD extensions in <ctype.h>.
2) Move incomplete check for / in locale name from env section to
loadlocale(), add check for "." and ".." too.
It allows to check any argument, not env only.
3) Redesing LOAD_CATEGORY macro to eliminate code duplication.
4) Try harder in fallback code: if old locale can't be restored,
load "C" locale
5) White space formatting, long lines, etc.
kernel access control.
Extensions to libc to provide basic MAC label manipulation facilities
for userland. These interface will be replaced in the next month
or two with more flexible interfaces, but provide sufficient support
to allow use of the Biba and MLS policies for user applications.
libc_r wrappers to follow.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
kernel access control.
Provide a library to manage user file system firewall-like rules
supported by the mac_bsdextended.ko security model. The kernel
module exports the current rule set using sysctl, and this
library provides a front end that includes support for retrieving
and setting rules, as well as printing and parsing them.
Note: as with other userland components, this is a WIP. However,
when used in combination with the soon-to-be-committed ugidfw,
it can actually be quite useful in multi-user environments to
allow the administrator to limit inter-user file operations without
resorting to heavier weight labeled security policies.
Obtained form: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
the PAM_ECHO_PASS option on-the-fly is a NOP (though it wasn't with the
old pam_get_pass(3) code). Instead, call pam_prompt(3) directly. This
actually simplifies the code a bit.
MFC after: 3 days
TCP clients. The problem was that a struct netconfig returned by
getnetconfigent() was being treated as a handle for __rpc_getconf(),
which certainly isn't right.
The tirpc-99 code uses __rpc_setconf("udp")/__rpc_getconf() to find
the IPv4 udp netconfig, but our implementation of these functions
seem happy to return IPv6 entries, so we can't use them. By reverting
to the old version, we are hard-coding the name of the udp4 netid.
Tracked down by: Bakul Shah <bakul@bitblocks.com>
This will make the behavior robuster if many addresses are added
after the size estimation of storage at the first sysctl.
Reviewed by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
MFC after: 1 week
- use strlcpy.
- snprintf can return negative value, so cope with it.
- tweak interface index on interface locals (ff01::/16).
- removed unused macros.
- removed a macro that uses only once (in a trivial context).
- explicitly say goodbye to ENI_xxx.
- constify struct afd.
Obtained from: KAME
MFC after: 1 week
completeness and doesn't get us a working libc_r there because libc_r
uses setjmp() and setjmp() cannot be used for context switches on ia64
as-is (or sparc64). Rather than making setjmp/longjmp behave like
the *context() calls, it would be far better to make libc_r use *context()
directly which is what they are for.
Obtained from: marcel
info. This turned out to be rather useful on ia64 for tracking down
malloc/free problems.
Detect duplicate free()'s - otherwise these show up as a guard1 failure
and it looks like corruption instead of something simple like a second
free() where there shouldn't be.
Deal with libz using libc headers and not seeing the malloc/free stuff that
we provide in libstand. Do similar nastiness to what is done for bzlib.
Tested on: i386, ia64 (compile, run)
- add GLOB_NOMATCH return value and use it when we don't get a match
- rename GLOB_ABEND to GLOB_ABORTED and use it instead of returning 1
in some places
- add GLOB_NOESCAPE flag and retire GLOB_QUOTE to compatibility
section
Suggestions/advice on correct usage of POSIX defines: wollman
support creation times such as UFS2) to the value of the
modification time if the value of the modification time is older
than the current creation time. See utimes(2) for further details.
Sponsored by: DARPA & NAI Labs.
Assembler macros are tidied up and made as similar as sanely possible.
The macros are translated into C (__inline static) functions for lint.
Declaration orders are made the same.
Declarations are all ISOfied and tidied up.
Comment contents have gratuitous diffs removed.
The net result is a bunch of crt1.c's that are 90% the same.
It may be possible to now encapsulate the differences in one
MD header, and have only one MI crt1.c file (although the macros
to do this may be ugly).
Helpful comments by: obrien, bde
Alpha tested by: des
i386-elf tested by: markm
It's silly to call sysctl() to get the value of _PATH_STDPATH from
<paths.h> when we can just use it directly. This greatly simplifies
the implementation. (This is also part of my grand scheme to get
rid of sysctl's `user' category, which should never have been created.)
Use strlcpy() instead of strncpy() as it has the exact semantics we want.
no punch_fw was used.
Fix another couple of bugs which prevented rules from being
installed properly.
On passing, use IPFW2 instead of NEW_IPFW to compile the new code,
and slightly simplify the instruction generation code.
file descriptors does not change upon dropping privilege, and include
a likely case of `setuid(non_superuser); exec(...);'.
Sponsored by: DARPA, NAI Labs
Obtained from: TrustedBSD Project
the build. It is here to compartmentalise functionality currently duplicated
in many notable programs in the base system. It currently handles block
reads and writes, as well as reading and writing of the filesystem superblock,
and the reading/lookup of inode data. It supports both UFS and UFS2. I
will be maintaining it, and porting programs to use it, however for now, it
is simply being built as part of world.
The ability to schedule multiple threads per process
(one one cpu) by making ALL system calls optionally asynchronous.
to come: ia64 and power-pc patches, patches for gdb, test program (in tools)
Reviewed by: Almost everyone who counts
(at various times, peter, jhb, matt, alfred, mini, bernd,
and a cast of thousands)
NOTE: this is still Beta code, and contains lots of debugging stuff.
expect slight instability in signals..
This code makes use of variable-size kernel representation of rules
(exactly the same concept of BPF instructions, as used in the BSDI's
firewall), which makes firewall operation a lot faster, and the
code more readable and easier to extend and debug.
The interface with the rest of the system is unchanged, as witnessed
by this commit. The only extra kernel files that I am touching
are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In
userland I only had to touch those programs which manipulate the
internal representation of firewall rules).
The code is almost entirely new (and I believe I have written the
vast majority of those sections which were taken from the former
ip_fw.c), so rather than modifying the old ip_fw.c I decided to
create a new file, sys/netinet/ip_fw2.c . Same for the user
interface, which is in sbin/ipfw/ipfw2.c (it still compiles to
/sbin/ipfw). The old files are still there, and will be removed
in due time.
I have not renamed the header file because it would have required
touching a one-line change to a number of kernel files.
In terms of user interface, the new "ipfw" is supposed to accepts
the old syntax for ipfw rules (and produce the same output with
"ipfw show". Only a couple of the old options (out of some 30 of
them) has not been implemented, but they will be soon.
On the other hand, the new code has some very powerful extensions.
First, you can put "or" connectives between match fields (and soon
also between options), and write things like
ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any
This should make rulesets slightly more compact (and lines longer!),
by condensing 2 or more of the old rules into single ones.
Also, as an example of how easy the rules can be extended, I have
implemented an 'address set' match pattern, where you can specify
an IP address in a format like this:
10.20.30.0/26{18,44,33,22,9}
which will match the set of hosts listed in braces belonging to the
subnet 10.20.30.0/26 . The match is done using a bitmap, so it is
essentially a constant time operation requiring a handful of CPU
instructions (and a very small amount of memmory -- for a full /24
subnet, the instruction only consumes 40 bytes).
Again, in this commit I have focused on functionality and tried
to minimize changes to the other parts of the system. Some performance
improvement can be achieved with minor changes to the interface of
ip_fw_chk_t. This will be done later when this code is settled.
The code is meant to compile unmodified on RELENG_4 (once the
PACKET_TAG_* changes have been merged), for this reason
you will see #ifdef __FreeBSD_version in a couple of places.
This should minimize errors when (hopefully soon) it will be time
to do the MFC.
re-read from the stack mid copy. This may help mitigate the recent
Apache buffer overrun and future overruns of the sort.
Reviewed by: jdp
MFC after: 2 days
