users to set the MAC address for a device.
Clean up some obsolete code in pci_virtio_net.c
Allow an error return from a PCI device emulation's init routine
to be propagated all the way back to the top-level and result in
the process exiting.
Submitted by: Dinakar Medavaram dinnu sun at gmail (original version)
If this capability is negotiated by the guest then the device will
generate an interrupt when it runs out of available tx/rx descriptors.
Reviewed by: grehan
Obtained from: NetApp
drop any frames that arrive while the device is starved for receive buffers.
This makes the receive path to only execute in context of the receive thread
and allows for further simplification.
Reviewed by: grehan
than blocking the vCPU thread. This improves bulk data performance
by ~30-40% and doesn't harm req/resp time for stock netperf runs.
Future work will use a thread pool rather than a thread per tx queue.
Submitted by: Dinakar Medavaram
Reviewed by: neel, grehan
Obtained from: NetApp
silently overwriting the previous assignment.
Gripe if the emulation is not recognized instead of silently ignoring the
emulated device.
If an error is detected by pci_parse_slot() then exit from the command line
parsing loop in main().
Submitted by (initial version): Chris Torek (chris.torek@gmail.com)
descriptors. Prior to this change the device would only work with guests
that chose to use indirect descriptors.
Modify the device reset callback to actually reset the device state.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
This was working by accident because:
- the RB_HEADs were being initialized to zero as part of BSS
- the pthread_rwlock functions were implicitly initializing the lock object
Obtained from: NetApp
- use clock_gettime(2) as the time base for the emulated ACPI timer instead
of directly using rdtsc().
- don't advertise the invariant TSC capability to the guest to discourage it
from using the TSC as its time base.
Discussed with: jhb@ (about making 'smp_tsc' a global)
Reported by: Dan Mack on freebsd-virtualization@
Obtained from: NetApp
- Respect the MEMEN and PORTEN bits in the command register
- Allow the guest to reprogram the address decoded by the BAR
Submitted by: Gopakumar T
Obtained from: NetApp
command line option "-m <memsize in MB>" to specify the memory size.
Prior to this change the user needed to explicitly specify the amount of
memory allocated below 4G (-m <lowmem>) and the amount above 4G (-M <highmem>).
The "-M" option is no longer supported by 'bhyveload' and 'bhyve'.
The start of the PCI hole is fixed at 3GB and cannot be directly changed
using command line options. However it is still possible to change this in
special circumstances via the 'vm_set_lowmem_limit()' API provided by
libvmmapi.
Submitted by: Dinakar Medavaram (initial version)
Reviewed by: grehan
Obtained from: NetApp
into the MSI-X table before using it to calculate the table index.
In the common case where the MSI-X table is located at the begining of the
BAR these two offsets are identical and thus the code was working by accident.
This change will fix the case where the MSI-X table is located in the middle
or at the end of the BAR that contains it.
Obtained from: NetApp
This seems prudent to do in its own right but it also opens up the possibility
of not having to mmap the entire guest address space in the 'bhyve' process
context.
Discussed with: grehan
Obtained from: NetApp
These set of ranges will be looked at if a standard memory
range isn't found, and won't be installed in the cache.
Use this to implement the memory behaviour of the PCI hole on
x86 systems, where writes are ignored and reads always return -1.
This allows breakpoints to be set when issuing a 'boot -d', which
has the side effect of accessing the PCI hole when changing the
PTE protection on kernel code, since the pmap layer hasn't been
initialized (a bug, but present in existing FreeBSD releases so
has to be handled).
Reviewed by: neel
Obtained from: NetApp
Prior to this change pinning was implemented via an ioctl (VM_SET_PINNING)
that called 'sched_bind()' on behalf of the user thread.
The ULE implementation of 'sched_bind()' bumps up 'td_pinned' which in turn
runs afoul of the assertion '(td_pinned == 0)' in userret().
Using the cpuset affinity to implement pinning of the vcpu threads works with
both 4BSD and ULE schedulers and has the happy side-effect of getting rid
of a bunch of code in vmm.ko.
Discussed with: grehan
the default.
The current behavior of advertising a single MSI vector can be requested by
setting the environment variable "BHYVE_USE_MSI" to "yes". The use of MSI
is not compliant with the virtio specification and will be eventually phased
out.
Submitted by: Gopakumar T
Obtained from: NetApp
can only be located at the beginning or the end of the BAR.
If the MSI-table is located in the middle of a BAR then we will split the
BAR into two and create two mappings - one before the table and one after
the table - leaving a hole in place of the table so accesses to it can be
trapped and emulated.
Obtained from: NetApp
devices are MSI-X capable. This in turn would lead it to treat bar 0 as
the MSI-X table bar even if the underlying device did not support MSI-X.
Fix this by providing an API to query the MSI-X table index of the emulated
device. If the underlying device does not support MSI-X then this API will
return -1.
Obtained from: NetApp
the default.
The current behavior of advertising a single MSI vector can be requested by
setting the environment variable "BHYVE_USE_MSI" to "true". The use of MSI
is not compliant with the virtio specification and will be eventually phased
out.
Submitted by: Gopakumar T
Obtained from: NetApp
statically. In most cases the number of table entries will be far less than
the maximum of 2048 allowed by the PCI specification.
Reuse macros from pcireg.h to interpret the MSI-X capability instead of rolling
our own.
Obtained from: NetApp
fill up to the uart's rx fifo size, and leave any remaining input
for when the rx fifo is read. This allows cut'n'paste of long lines
to be done into the bhyve console without truncation.
Also, introduce a mutex since the file input will run in the mevent
thread context and may corrupt state accessed by a vCPU thread.
Reviewed by: neel
Approved by: NetApp
With this change, dbench with >= 4 processes runs without getting
weird jumps forward in time when the APCI pmtimer is the default
timecounter.
Obtained from: NetApp
the guest to execute real or unpaged protected mode code - bhyve relies on
this feature to execute the AP bootstrap code.
Get rid of the hack that allowed bhyve to support SMP guests on processors
that do not have the "unrestricted guest" capability. This hack was entirely
FreeBSD-specific and would not work with any other guest OS.
Instead, limit the number of vcpus to 1 when executing on processors without
"unrestricted guest" capability.
Suggested by: grehan
Obtained from: NetApp
bhyve is intended to be a generic hypervisor, and not FreeBSD-specific.
(renaming internal routines will come later)
Reviewed by: neel
Obtained from: NetApp
