but returned them incorrectly, causing tar to actually
erase the resulting file while trying to restore the
link. This one-line fix corrects the hardlink descriptions
to avoid this problem.
Thanks to Jung-uk Kim for pointing this out.
Approved by: re (kib)
restrictions) were found to be inadequately described by a boolean.
Define a new parameter type with three values (disable, new, inherit)
to handle these and future cases.
Approved by: re (kib), bz (mentor)
Discussed with: rwatson
in up to 16 (KI_NGROUPS) values and steal a bit from ki_cr_flags
(all bits currently unused) to indicate overflow with the new flag
KI_CRF_GRP_OVERFLOW.
This fixes procstat -s.
Approved by: re (kib)
without VIMAGE virtualization in the kernel.
If we cannot resolve a symbol try to see if we can find it with
prefix of the virtualized subsystem, currently only "vnet_entry"
by identifying either the vnet of the current process for a
live system or the vnet of proc0 (or of dumptid if compiled
in a non-default way).
The way this is done currently allows us to only touch libkvm
but no single application. Once we are going to virtualize more
subsystems we will have to review this decision for better scaling.
Submitted by: rwatson (initial version of kvm_vnet.c, lots of ideas)
Reviewed by: rwatson
Approved by: re (kib)
other than the current system-wide size (32-bits) has been updated so
for now just cautiously turn the check off. While here fix the check
for IDs being too large which doesn't work due to type mis-matches.
Reviewed by: jhb (previous version)
Approved by: re (kib)
MFC after: 1 month (type mis-match fixes only)
preparation for 8.0-RELEASE. Add the previous version of those
libraries to ObsoleteFiles.inc and bump __FreeBSD_Version.
Reviewed by: kib
Approved by: re (rwatson)
structs had incorrect member offsets, limiting dtrace's usefulness
when working with them. An example of incorrect info (struct
rtentry) from before this fix:
<1738> STRUCT rtentry (200 bytes)
rt_nodes type=1731 off=0
rt_gateway type=849 off=65280 <== WRONG, should be 8 * 96
rt_flags type=3 off=65344 <== wrong again, and so on..
...
Approved by: re (kib), gnn (mentor)
MFC after: 2 weeks
compiled with stack protector.
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC
generates local calls to this function which result in absolute
relocations put into position-independent code segment, making dynamic
loader do extra work every time given shared library is being relocated
and making affected text pages non-shareable.
Reviewed by: kib
Approved by: re (kib)
behavior is mandated by POSIX.
- Do not fail requests that pass a length greater than SSIZE_MAX
(such as > 2GB on 32-bit platforms). The 'len' parameter is actually
an unsigned 'size_t' so negative values don't really make sense.
Submitted by: Alexander Best alexbestms at math.uni-muenster.de
Reviewed by: alc
Approved by: re (kib)
MFC after: 1 week
Right now nmemb is returned when size is 0. In newer versions of the
standards, it is explicitly required that fwrite() should return 0.
Submitted by: Christoph Mallon
Approved by: re (kib)
- Fix possible uninitialised variables and null derefs
- Support big transfers
- Various bug fixes and style changes
Submitted by: Sylvestre Gallon
Sponsored by: Google Summer of Code 2009
Approved by: re (kib)
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
if the new file mode is the same as it was before; however, this
optimization must be disabled for filesystems that support NFSv4 ACLs.
Chmod uses pathconf(2) to determine whether this is the case - however,
pathconf(2) always follows symbolic links, while the 'chmod -h' doesn't.
This change adds lpathconf(3) to make it possible to solve that problem
in a clean way.
Reviewed by: rwatson (earlier version)
Approved by: re (kib)
The most notable is that it is not bumped in rwlock_rdlock_common() when
the hard path (__thr_rwlock_rdlock()) returns successfully.
This can lead to deadlocks in libthr when rwlocks recursion in read mode
happens.
Fix the interested parts by correctly handling rdlock_count.
PR: threads/136345
Reported by: rink
Tested by: rink
Reviewed by: jeff
Approved by: re (kib)
MFC: 2 weeks
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC generates
local calls to this function which result in absolute relocations put into
position-independent code segment, making dynamic loader do extra work everys
time given shared library is being relocated and making affected text pages
non-shareable.
Reviewed by: kib
Approved by: re (kensmith)
This adds the following functions to the acl(3) API: acl_add_flag_np,
acl_clear_flags_np, acl_create_entry_np, acl_delete_entry_np,
acl_delete_flag_np, acl_get_extended_np, acl_get_flag_np, acl_get_flagset_np,
acl_set_extended_np, acl_set_flagset_np, acl_to_text_np, acl_is_trivial_np,
acl_strip_np, acl_get_brand_np. Most of them are similar to what Darwin
does. There are no backward-incompatible changes.
Approved by: rwatson@
part of libc is still not thread safe but this would at least
reduce the problems we have.
PR: threads/118544
Submitted by: Changming Sun <snnn119 gmail com>
MFC after: 2 weeks
- The uid/cuid members of struct ipc_perm are now uid_t instead of unsigned
short.
- The gid/cgid members of struct ipc_perm are now gid_t instead of unsigned
short.
- The mode member of struct ipc_perm is now mode_t instead of unsigned short
(this is merely a style bug).
- The rather dubious padding fields for ABI compat with SV/I386 have been
removed from struct msqid_ds and struct semid_ds.
- The shm_segsz member of struct shmid_ds is now a size_t instead of an
int. This removes the need for the shm_bsegsz member in struct
shmid_kernel and should allow for complete support of SYSV SHM regions
>= 2GB.
- The shm_nattch member of struct shmid_ds is now an int instead of a
short.
- The shm_internal member of struct shmid_ds is now gone. The internal
VM object pointer for SHM regions has been moved into struct
shmid_kernel.
- The existing __semctl(), msgctl(), and shmctl() system call entries are
now marked COMPAT7 and new versions of those system calls which support
the new ABI are now present.
- The new system calls are assigned to the FBSD-1.1 version in libc. The
FBSD-1.0 symbols in libc now refer to the old COMPAT7 system calls.
- A simplistic framework for tagging system calls with compatibility
symbol versions has been added to libc. Version tags are added to
system calls by adding an appropriate __sym_compat() entry to
src/lib/libc/incldue/compat.h. [1]
PR: kern/16195 kern/113218 bin/129855
Reviewed by: arch@, rwatson
Discussed with: kan, kib [1]
- update for getrlimit(2) manpage;
- support for setting RLIMIT_SWAP in login class;
- addition to the limits(1) and sh and csh limit-setting builtins;
- tuning(7) documentation on the sysctls controlling overcommit.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
It's not necessary to add stdlib directories for each architecture, even
if the architecture doesn't implement any files of its own.
Submitted by: Christoph Mallon
Add libusb 1.0 support which is compatible with the latest revision on
Sourceforge. Libusb 1.0 is a portable usb api released December 2008 and
supersedes the original libusb released 10 years ago, it supports isochronous
endpoints and asynchronous I/O. Many applications have already started using
the interfaces.
This has been developed as part of Google Summer of Code this year by Sylvestre
Gallon and has been cribbed early due to it being desirable in FreeBSD 8.0
Submitted by: Sylvestre Gallon
Sponsored by: Google Summer of Code 2009
Reviewed by: Hans Petter Selasky
Sourceforge. Libusb 1.0 is a portable usb api released December 2008 and
supersedes the original libusb released 10 years ago, it supports isochronous
endpoints and asynchronous I/O. Many applications have already started using
the interfaces.
This has been developed as part of Google Summer of Code this year by Sylvestre
Gallon and has been cribbed early due to it being desirable in FreeBSD 8.0
Submitted by: Sylvestre Gallon
Sponsored by: Google Summer of Code 2009
Reviewed by: Hans Petter Selasky
possible to do tolower/toupper independently without code conversion.
Submitted by: imura (but bugs are mine)
Obtained from: http://people.freebsd.org/~imura/kiconv/
(1_kiconv_wctype_kern.diff, 1_kiconv_wctype_user.diff)
(i.e. /etc/termcap). This can be useful when using /rescue/vi while /usr
is not (or unable to be) mounted. The termcap.small can be found in
src/etc/termcap.small.
PR: bin/80256 (audit-trail)
Submitted by: Brian Candler <B.Candler at pobox.com>, Alex Kozlov <spam at rm-rf.kiev.ua>
MFC after: 1 month
main cycle only if the len passed is equal to 0. If end address
overflows use last possible address as the end address.
Based on: discussion on arm@
MFC after: 1 month
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively. (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer. Do the equivalent in
kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively. Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary. In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.
Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups. When feasible, truncate
the group list rather than generating an error.
Minor changes:
- Reduce the number of hand rolled versions of groupmember().
- Do not assign to both cr_gid and cr_groups[0].
- Modify ipfw to cache ucreds instead of part of their contents since
they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation)
X-MFC after: never
PR: bin/113398 kern/133867
system callers of getgroups(), getgrouplist(), and setgroups() to
allocate buffers dynamically. Specifically, allocate a buffer of size
sysconf(_SC_NGROUPS_MAX)+1 (+2 in a few cases to allow for overflow).
This (or similar gymnastics) is required for the code to actually follow
the POSIX.1-2008 specification where {NGROUPS_MAX} may differ at runtime
and where getgroups may return {NGROUPS_MAX}+1 results on systems like
FreeBSD which include the primary group.
In id(1), don't pointlessly add the primary group to the list of all
groups, it is always the first result from getgroups(). In principle
the old code was more portable, but this was only done in one of the two
places where getgroups() was called to the overall effect was pointless.
Document the actual POSIX requirements in the getgroups(2) and
setgroups(2) manpages. We do not yet support a dynamic NGROUPS, but we
may in the future.
MFC after: 2 weeks
dace for UPDv4 sockets bound to INADDR_ANY. Move the code to set
IP_RECVDSTADDR/IP_SENDSRCADDR into svc_dg.c, so that both TLI and non-TLI
users will be using it.
Back out my previous commit to mountd. Turns out the problem was affecting
more than one binary so it needs to me addressed in generic rpc code in
libc in order to fix them all.
Reported by: lstewart
Tested by: lstewart
While hacking on TTY code, I often miss a small utility to revoke my own
(pseudo-)terminals. This small utility is just a small wrapper around
the revoke(2) call, so you can destroy your very own login sessions.
Approved by: re
any open file descriptors >= 'lowfd'. It is largely identical to the same
function on other operating systems such as Solaris, DFly, NetBSD, and
OpenBSD. One difference from other *BSD is that this closefrom() does not
fail with any errors. In practice, while the manpages for NetBSD and
OpenBSD claim that they return EINTR, they ignore internal errors from
close() and never return EINTR. DFly does return EINTR, but for the common
use case (closing fd's prior to execve()), the caller really wants all
fd's closed and returning EINTR just forces callers to call closefrom() in
a loop until it stops failing.
Note that this implementation of closefrom(2) does not make any effort to
resolve userland races with open(2) in other threads. As such, it is not
multithread safe.
Submitted by: rwatson (initial version)
Reviewed by: rwatson
MFC after: 2 weeks
sanitization broke sysinstall on some disks. This was due to the disks
reporting a geometry that was incorrectly sanitized by sysinstall. This makes
the sanitization consistent with fdisk.
Tested by: randi
use almost anything that uses libufs(3) against a file as an unprivileged user, e.g.
tunefs(8) and dumpfs(8) against a makefs(8)-created image.
Prodded by: kensmith
The amd64-specific bits of msun use an undocumented constraint, which is
less likely to be supported by other compilers (such as Clang). Change
the code to use a more common machine constraint.
Obtained from: /projects/clangbsd/
The problem with fcntl(2) locks is that they are not inherited by child
processes. This breaks pidfile(3), where the common idiom is to open
and lock the PID file before daemonizing.
lots of new features compared to 9.4.x, including:
Full NSEC3 support
Automatic zone re-signing
New update-policy methods tcp-self and 6to4-self
DHCID support.
More detailed statistics counters including those supported in BIND 8.
Faster ACL processing.
Efficient LRU cache-cleaning mechanism.
NSID support.
Last year I added SLIST_REMOVE_NEXT and STAILQ_REMOVE_NEXT, to remove
entries behind an element in the list, using O(1) time. I recently
discovered NetBSD also has a similar macro, called SLIST_REMOVE_AFTER.
In my opinion this approach is a lot better:
- It doesn't have the unused first argument of the list pointer. I added
this, mainly because OpenBSD also had it.
- The _AFTER suffix makes a lot more sense, because it is related to
SLIST_INSERT_AFTER. _NEXT is only used to iterate through the list.
The reason why I want to rename this now, is to make sure we don't
release a major version with the badly named macros.
by creating a child jail, which is visible to that jail and to any
parent jails. Child jails may be restricted more than their parents,
but never less. Jail names reflect this hierarchy, being MIB-style
dot-separated strings.
Every thread now points to a jail, the default being prison0, which
contains information about the physical system. Prison0's root
directory is the same as rootvnode; its hostname is the same as the
global hostname, and its securelevel replaces the global securelevel.
Note that the variable "securelevel" has actually gone away, which
should not cause any problems for code that properly uses
securelevel_gt() and securelevel_ge().
Some jail-related permissions that were kept in global variables and
set via sysctls are now per-jail settings. The sysctls still exist for
backward compatibility, used only by the now-deprecated jail(2) system
call.
Approved by: bz (mentor)
Upgrade of the tzcode from 2004a to 2009e.
Changes are numerous, but include...
- New format of the output of zic, which supports both 32 and 64
bit time_t formats.
- zdump on 64 bit platforms will actually produce some output instead
of doing nothing for a looooooooong time.
- linux_base-fX, with X >= at least 8, will work without problems related
to the local time again.
The original patch, based on the 2008e, has been running for a long
time on both my laptop and desktop machine and have been tested by
other people.
After the installation of this code and the running of zic(8), you
need to run tzsetup(8) again to install the new datafile.
Approved by: wollman@ for usr.sbin/zic
MFC after: 1 month
field when computing the length of the gzip header.
Thanks to Dag-Erling for pointing me to the OpenSSH tarballs,
which are the first files I've seen that actually used this field.
the length by evaluating the value from the copy, cbuf instead. This
fixes a crash caused by previous commit (use-after-free)
Submitted by: Dimitry Andric <dimitry andric com>
Pointy hat to: delphij
to eliminate some duplicated code. In particular,
archive_read_open_filename() has different close
handling than archive_read_open_fd(), so delegating
the former to the latter in the degenerate case
(a NULL filename is treated as stdin) broke reading
from pipelines. In particular, this fixes occasional
port failures that were seen when using "gunzip | tar"
pipelines under /bin/csh.
Thanks to Alexey Shuvaev for reporting this failure and
patiently helping me to track down the cause.
The entire world seems to use the non-standard TIOCSCTTY ioctl to make a
TTY a controlling terminal of a session. Even though tcsetsid(3) is also
non-standard, I think it's a lot better to use in our own source code,
mainly because it's similar to tcsetpgrp(), tcgetpgrp() and tcgetsid().
I stole the idea from QNX. They do it the other way around; their
TIOCSCTTY is just a wrapper around tcsetsid(). tcsetsid() then calls
into an IPC framework.
interface as nmount(2). Three new system calls are added:
* jail_set, to create jails and change the parameters of existing jails.
This replaces jail(2).
* jail_get, to read the parameters of existing jails. This replaces the
security.jail.list sysctl.
* jail_remove to kill off a jail's processes and remove the jail.
Most jail parameters may now be changed after creation, and jails may be
set to exist without any attached processes. The current jail(2) system
call still exists, though it is now a stub to jail_set(2).
Approved by: bz (mentor)
the kernel will return in msfr_nsrcs the number of source filters
in-mode for a given multicast group.
However, the filters themselves were never copied out, as the libc
function clobbers this field with zero, causing the kernel to assume
the provided vector of struct sockaddr_storage has zero length.
This bug would only affect users of SSM multicast, which is shimmed
in 7.x.
Picked up during mtest(8) refactoring.
MFC after: 1 day
to if (len == 0).
The length is supposed to be unsigned, so len - 1 < 0 won't happen except
if len == 0 anyway, and it would return 0 when it shouldn't, if len was
> INT_MAX.
Spotted out by: Channa <channa kad gmail com>
Unfortunately, liblzma itself is GPLed, so unlikely to become part of
the FreeBSD base system.
However, the core lzma compression/decompression code is public
domain, so it should be feasible for someone to create a compatible
library without the GPL strings.
read_support_format_raw() allows people to exploit libarchive's
automatic decompression support by simply stubbing out the
archive format handler.
The raw handler is not enabled by support_format_all(), of course.
It bids 1 on any non-empty input and always returns a single
entry named "data" with no properties set.
Fix reading big-endian binary cpio archives, and add a test.
While I'm here, add a note about Solaris ACL extension for cpio,
which should be relatively straightforward to support.
Thanks to: Edward Napierala, who sent me a big-endian cpio archive
from a Solaris system he's been playing with.
Pointy hat: me
Make test_fuzz a bit more sensitive by actually reading the body
of each entry instead of skipping it.
While I'm here, move the "UnsupportedCompress" macro into the
only file that still uses it.
* Fix parsing of POSIX.1e ACLs from Solaris tar archives
* Test the above
* Preserve the order of POSIX.1e ACL entries
* Update tests whose results depended on the order of ACL entries
* Identify NFSv4 ACLs in Solaris tar archives and warn that
they're not yet supported. (In particular, don't try to parse
them as POSIX.1e ACLs.)
Thanks to: Edward Napierala sent me some Solaris 10 tar archives to test
* Split whiny skip function to create a new best-effort skip_lenient()
* Correctly increment the top-level file position only for the top filter
* Simulate skip by reading against the current filter, not the top filter
The latter two bugs aren't currently visible because no existing
filter delegates skip operations.
access to the file data (if the file exists on
disk). This was broken for the first regular
file; fix it and add a test so it won't break again.
In particular, this fixes the following idiom for creating
a tar archive in which every file is owned by root:
tar cf - --format=mtree . \
| sed -e 's/uname=[a-z]*/uname=root/' -e 's/uid=[0-9]*/uid=0/' \
| tar cf - @-
descriptions of the GNU tar "posix-style" sparse format,
clarification of the Solaris tar ACL storage,
and a few comments about Mac OS X tar's resource storage.
This should make it easier to make Linux BlueZ libhci port.
Reviewed by: Iain Hibbert < plunky -at- rya-online -dot- net > of NetBSD
MFC after: 1 week
Inspired by: Linux BlueZ
Inspired by: NetBSD
OpenBSM history for imported revision below for reference.
MFC after: 2 weeks
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1
- Change auditon(2) parameters and data structures to be 32/64-bit architecture
independent. Add more information to man page about auditon(2) parameters.
- Add wrapper functions for auditon(2) to use legacy commands when the new
commands are not supported.
- Add default for 'expire-after' in audit_control to expire trail files when
the audit directory is more than 10 megabytes ('10M').
- Interface to convert between local and BSM fcntl(2) command values has been
added: au_bsm_to_fcntl_cmd(3) and au_fcntl_cmd_to_bsm(3), along with
definitions of constants in audit_fcntl.h.
- A bug, introduced in OpenBSM 1.1 alpha 4, in which AUT_RETURN32 tokens
generated by audit_submit(3) were improperly encoded has been fixed.
- Fix example in audit_submit(3) man page. Also, make it clear that we want
the audit ID as the argument.
- A new audit event class 'aa', for post-login authentication and
authorization events, has been added.
Not an issue for FreeBSD, since the base system has the necessary libraries.
Since all decompressors are always available now, we can unconditionally
enable them in archive_read_support_compression_all().
Since FreeBSD doesn't have liblzma in the base system, the
read side will always fall back to the unxz/unlzma commands for now.
(Which will in turn fail if those commands are not currently
installed.) The write side does not yet have a fallback, so
that will just fail.
fixes to read_support_compression_program. In particular, failure of
the external program is detected a lot earlier, which gives much more
reasonable error handling.
corrections to the Windows support to reconcile differences
between Visual Studio and Cygwin. Includes parts of
revisions 757, 774, 787, 815, 817, 819, 820, 844, and 886.
Of particular note, r886 overhauled the UTF-8/Unicode conversions to
work correctly regardless of whether the local system uses 16-bit
or 32-bit wchar_t. (I assume that systems with 16-bit wchar_t
use UTF-16 and those with 32-bit wchar_t use UCS-4.) This revision
also added a preference for wcrtomb() (which is thread-safe) on
platforms that support it.
r751: Change __archive_strncat() to use a void * source, which reduces
the amount of casting needed to use this with "char", "signed char"
and "unsigned char".
r752: Use additions instead of multiplications when growing buffer;
faster and less chance of overflow.
support for virtual core files (aka minidumps). physical core
files are not supported.
The implementation is cross-tool ready and can be used in a non-
powerpc hosted debugger to analyze PowerPC core files. It also
accepts core files that still have the dump header, as can be
the case within Juniper where TFTP-based kernel core files are
supported and savecore is not used to "extract" the core file
from some dump device.
Obtained from: Juniper Networks, Inc.
because it means getdelim() returns -1 for both error and EOF, and
never returns 0. However, this is what the original GNU implementation
does, and POSIX inherited the bug.
Reported by: marcus@
dlfunc() called dlsym() to do the work, and dlsym() determines the dso
that originating the call by the return address. Due to this, dlfunc()
operated as if the caller is always the libc.
To fix this, move the dlfunc() to rtld, where it can call the internal
implementation of dlsym, and still correctly fetch return address.
Provide usual weak stub for the symbol from libc for static binaries.
dlfunc is put to FBSD_1.0 symver namespace in the ld.so export to
override dlfunc@FBSD_1.0 weak symbol, exported by libc.
Reported, analyzed and tested by: Tijl Coosemans <tijl ulyssis org>
PR: standards/133339
Reviewed by: kan
these functions were moved into the kernel:
- Move the version entries from gen/ to sys/. Since the ABI of the actual
routines did not change, I'm still exporting them as FBSD 1.0 on purpose.
- Add FBSD-private versions for the _ and __sys_ variants.
