We don't need the result before next sleep time, so no reason to
additionally increase interrupt latency.
While there, remove extra PM ticks to microseconds conversion, making
C2/C3 sleep times look 4 times smaller than really. The conversion
is already done by AcpiGetTimerDuration(). Now I see reported sleep
times up to 0.5s, just as expected for planned 2 wakeups per second.
MFC after: 1 month
The ENTRY() macro was modified by commit
28d945204e to add an optional NOP instruction
at the beginning of the function. It is of course an arm64 instruction, so
unsuitable for the 32bits sigcode. So just use EENTRY() instead for
aarch32_sigcode. This should fix receiving signals when running 32bits
binaries on FreeBSD/arm64.
MFC After: 1 week
It has been observed that some systems are often unable to resume from
ddb after entering with debug.kdb.enter=1. Checking the status further
shows the terminal is blocked waiting in tty_drain(), but it never makes
progress in clearing the output queue, because sc->sc_txbusy is high.
I noticed that when entering polling mode for the debugger, IER_TXRDY is
set in the failure case. Since this bit is never tracked by the softc,
it will not be restored by ns8250_bus_ungrab(). This creates a race in
which a TX interrupt can be lost, creating the hang described above.
Ensuring that this bit is restored is enough to prevent this, and resume
from ddb as expected.
The solution is to track this bit in the sc->ier field, for the same
lifetime that TX interrupts are enabled.
PR: 223917, 240122
Reviewed by: imp, manu
Tested by: bz
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29130
I noticed that many of the math-related tests were failing on AArch64.
After a lot of debugging, I noticed that the floating point exception flags
were not being reset when starting a new process. This change resets the
VFP inside exec_setregs() to ensure no VFP register state is leaked from
parent processes to children.
This commit also moves the clearing of fpcr that was added in 65618fdda0
from fork() to execve() since that makes more sense: fork() can retain
current register values, but execve() should result in a well-defined
clean state.
Reviewed By: andrew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29060
The names are self-explanatory; these are currently only used by the
wg(8) tool, but they are handy data points to have.
Reviewed by: grehan
MFC after: 3 days
Discussed with: decke
Differential Revision: https://reviews.freebsd.org/D29143
If we hit an error during init, then we'll unwind our state and attempt
to detach the device -- don't block it.
This was discovered by creating a wg0 with missing parameters; said
failure ended up leaving this orphaned device in place and ended up
panicking the system upon enumeration of the dev.* sysctl space.
Reviewed by: gallatin, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29145
We have no use for the udphdr or this hlen local, just spell out the
addition inline.
MFC after: 3 days
Reviewed by: grehan, markj
Differential Revision: https://reviews.freebsd.org/D29142
This change converts most of the counters in the amd64 pmap from
global atomics to scalable counter(9) counters. Per discussion
with kib@, it also removes the handrolled per-CPU PCID save count
as it isn't considered generally useful.
The bulk of these counters remain guarded by PV_STATS, as it seems
unlikely that they will be useful outside of very specific debugging
scenarios. However, this change does add two new counters that
are available without PV_STATS. pt_page_count and pv_page_count
track the number of active physical-to-virtual list pages and page
table pages, respectively. These will be useful in evaluating
the memory footprint of pmap structures under various workloads,
which will help to guide future changes in this area.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D28923
Some framebuffer properties obtained from the device tree were not being
properly converted to host endian.
Replace OF_getprop calls by OF_getencprop where needed to fix this.
This fixes boot on PowerPC64 LE, when using ofwfb as the system console.
Reviewed by: bdragon
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27475
This is not ready yet for prime time
This reverts commit 763db58932.
This reverts commit f1ab799927.
This reverts commit 6e822e9957.
This reverts commit 77e1ccbee3.
The kernel-side already accepted a persistent-keepalive-interval, so
just add a verb to ifconfig(8) for it and start exporting it so that
ifconfig(8) can view it.
PR: 253790
MFC after: 3 days
Discussed with: decke
The way that wireguard is designed does not actually require all peers
to have endpoints. In an architecture that might mimic a traditional
VPN server <-> client, the wg interface on a server would have a number
of peers without set endpoints -- the expectation is that the "clients"
will connect to the "server" peer, which will authenticate the
connection as a known peer and learn the endpoint from there.
MFC after: 3 days
Discussed with: decke, grehan (independently)
Simple condition flip; we wanted to panic here after epoch_trace_list().
Reviewed by: glebius, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29125
No sleeping allowed here, so avoid it. Collect the subset of data we
want inside of the epoch, as we'll need extra allocations when we add
items to the nvlist.
Reviewed by: grehan (earlier version), markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29124
This partially reverts df55485085 but still fixes the leak. It was
overlooked (sigh) that some packets will exceed MHLEN and cannot be
physically contiguous without clustering, but we don't actually need
it to be. m_defrag() should pull up enough for any of the headers that
we do need to be accessible.
Fixes: df55485085
Pointy hat; kevans
Daniel reported that NFSv4 mounts were not working despite having
set "nfsv4_server_enable=YES" in /etc/rc.conf. Mountd was logging a
message that there was no /etc/exports file.
He noted that creating a /etc/exports file with a "V4:" line in it
was needed make NFSv4 mounts work.
At least one "V4:" line in one of the exports(5) file(s) is needed to
make NFSv4 mounts work. This patch fixes mountd.c so that it logs a
message indicting that there is no "V4:" line in any exports(5)
file when NFSv4 mounts are enabled.
To avoid this message being generated erroneously, /etc/rc.d/mountd
is updated to make sure vfs.nfsd.server_max_nfsvers is properly set
before mountd(8) is started.
Reported by: debdrup
PR: 253901
MFC after: 2 weeks
When we enter C2+ state via memory read, it may take chipset some
time to stop CPU. Extra register read covers that time. But MWAIT
makes CPU stop immediately, so we don't need to waste time after
wakeup with interrupts still disabled, increasing latency.
On my system it reduces ping localhost latency, waking up all CPUs
once a second, from 277us to 242us.
MFC after: 1 month
Even though the information is very limited, it seems the intent of
this flag is to control ACPI_BITREG_BUS_MASTER_STATUS use for C3,
not force ACPI_BITREG_ARB_DISABLE manipulations for C2, where it was
never needed, and which register not really doing anything for years.
It wasted lots of CPU time on congested global ACPI hardware lock
when many CPU cores were trying to enter/exit deep C-states same time.
On idle 80-core system it pushed ping localhost latency up to 20ms,
since badport_bandlim() via counter_ratecheck() wakes up all CPUs
same time once a second just to synchronously reset the counters.
Now enabling C-states increases the latency from 0.1 to just 0.25ms.
Discussed with: kib
MFC after: 1 month
config_intrhook doesn't need to be a two-pointer TAILQ. We rarely add/delete
from this and so those need not be optimized. Instaed, use the one-pointer
STAILQ plus a uintptr_t to be used as a flags word. This will allow these
changes to be MFC'd to 12 and 13 to fix a race in removable devices.
Feedback from: jhb
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D29004
P2P ifa may require 2 routes: one is the loopback route, another is
the "prefix" route towards its destination.
Current code marks loopback routes existence with IFA_RTSELF and
"prefix" p2p routes with IFA_ROUTE.
For historic reasons, we fill in ifa_dstaddr for loopback interfaces.
To avoid installing the same route twice, we preemptively set
IFA_RTSELF when adding "prefix" route for loopback.
However, the teardown part doesn't have this hack, so we try to
remove the same route twice.
Fix this by checking if ifa_dstaddr is different from the ifa_addr
and moving this logic into a separate function.
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D29121
MFC after: 3 days
Misbehavior has been observed with TSC under VirtualBox, where threads
doing small sleeps (~1 second) may miss their wake up and hang around
in a sleep state indefinitely. Switching back to ACPI-fast decidedly
fixes it, so stop using TSC on VirtualBox at least for the time being.
This partially reverts 84eaf2ccc6, applying it only to VirtualBox and
increasing the quality to 0. Negative qualities can never be chosen and
cannot be chosen with the tunable recently added. If we do not have a
timecounter with a higher quality than 0, then TSC does at least leave
the system mostly usable.
PR: 253087
Reviewed by: emaste, kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29132
The structure was renamed while refactoring Netflix's KTLS changes for
upstreaming, but the original name remained in tcp.4 and was
subsequently copied to ktls.4.
PR: 254141
Reported by: asomers
MFC after: 3 days
This structure is shared among multiple instances of a driver, so we
should ensure that it doesn't somehow get treated as if there's a
separate instance per interface. This is especially important for
software-only drivers like wg.
DEVICE_REGISTER() still returns a void * and so the per-driver sctx
structures are not yet defined with the const qualifier.
Reviewed by: gallatin, erj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29102
Other kernel sanitizers (KMSAN, KASAN) require interceptors as well, so
put these in a more generic place as a step towards importing the other
sanitizers.
No functional change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29103
ath_hal is compiled into the kernel by default and so always prints a
message to dmesg even when the system has no ath hardware.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
timer_settime(2) may be used to configure a timeout in the past. If
the timer is also periodic, we also try to compute the number of timer
overruns that occurred between the initial timeout and the time at which
the timer fired. This is done in a loop which iterates once per period
between the initial timeout and now. If the period is small and the
initial timeout was a long time ago, this loop can take forever to run,
so the system is effectively DOSed.
Replace the loop with a more direct calculation of
(now - initial timeout) / period to compute the number of overruns.
Reported by: syzkaller
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29093
This fixes tests/lib/msun/logarithm_test after compiling the test with
-fno-builtin (D28577). Adding invln10_lo + invln10_10 results in
FE_INEXACT (for all inputs) and the same for the log2l invln2_lo + invln2_hi.
This patch avoids FE_INEXACT (for exact results such as 0) by defining a
constant and using that.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D28786
The argument has to be a single whitespace-separate value. While touching
all these lines also add ksh93, since `atf_set "require.progs"` overrides
the default value specified in the Kyuafile. This then results in tests
being executed despite ksh93 not being installed.
Reviewed By: asomers
Differential Revision: https://reviews.freebsd.org/D29066
When I synchronized kern.mk with bsd.sys.mk, I accidentally changed
CCLDFLAGS to LDFLAGS which is not used by the kernel builds. This commit
should unbreak the GitHub actions cross-build CI. I didn't notice it
locally because cheribuild already passes -fuse-ld in the linker flags as
it predates this being done in the makefiles.
Reported By: Jose Luis Duran
Fixes: 172a624f0 ("Silence annoying and incorrect non-default linker warning with GCC")
