When adding an SPD entry that already exists, a refcount wraparound
panic is encountered. This was caused from dropping a reference on the
wrong security policy.
Fixes: 4920e38fec ("ipsec: fix race condition in key.c")
Reviewed by: wma
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D33100
The check to see if TCP port allocation should change from random to
sequential port allocation mode may incorrectly cause a false positive
due to negative wraparound.
Example:
V_ipport_tcpallocs = 2147483585 (0x7fffffc1)
V_ipport_tcplastcount = 2147483553 (0x7fffffa1)
V_ipport_randomcps = 100
The original code would compare (2147483585 <= -2147483643) and thus
incorrectly move to sequential allocation mode.
Compute the delta first before comparing against the desired limit to
limit the wraparound effect (since tcplastcount is always a snapshot
of a previous tcpallocs).
When sending packets the stcb was used to access the inp and then
access the endpoint specific IPv6 level options. This fails when
there exists an inp, but no stcb yet. This is the case for sending
an INIT-ACK in response to an INIT when no association already
exists. Fix this by just providing the inp instead of the stcb.
PR: 260120
MFC after: 1 week
Fix logic error causing UDP(-Lite) local ephemeral port bindings
to count against the TCP allocation counter, potentially causing
TCP to go from random to sequential port allocation mode prematurely.
This should unbreak the kernel build when "options RSS" is
defined in the kernel configuration, and make the feature work.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reported by: adrian@
Sponsored by: Intel Corporation
Some shared libraries specify mappings that leave a gap (actually a
MAP_GUARD mapping) in between the file mappings (libcrypto.so was
the one I found), and this would cause rd_loadobj_iter() to report
the mapping info incorrectly, leaving out rdl_path and misreporting
rdl_offset for file mappings after the gap. Fix rd_loadobj_iter()
to handle this situation.
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D32950
The previous commit to this node falsely stated that locked callouts
are compatible with netgraph ng_callout KPI. They are not. An item
can be queued instead of being applied to the node, which results in
a mutex leak to the callout thread and later unlocked call into function
that expects to be called locked.
Potentially netgraph can be taught to handle locked callouts, but that
would bring a lot of complexity in it. Instead lets question necessity
of ng_callout() instead of callout_reset(). It protects against node
going away while callout is scheduled. But a node that drains all
callouts in the shutdown method (ng_l2tp does) is already protected.
Fixes: 89042ff776
Use OLD_FILES for a few symbolic links and static libraries previously
included in OLD_LIBS.
Add a missing shared library major number to an old libroken entry.
The Li macros has been deprecated by mdoc some time ago. Recommend the
use of Ql instead.
Reviewed by: debdrup
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33232
Some AMD systems I have report 8 NMI and 3591 polled error sources.
Previous code could handle only one NMI source and used separate
callout for each polled source. New code can handle multiple NMIs
and groups polled sources by power of 2 of the polling period.
MFC after: 2 weeks
ki_fd is legitimately NULL when 32bit process requests process data
from 64bit host kernel. The field is not used by the code for sysctl
case; procstat_getfiles_kvm() checks ki_fd.
PR: 260174
Reported by: Damjan Jovanovic <damjan.jov@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
Port 9781c28c6d and a8837c77ef to the mps driver. Before this
change devq was frozen only if some command was sent to the target after
reset started, but release was called always. This change freezes the
devq immediately, leaving mprsas_action_scsiio() check only to cover
race condition due to different lock devq use.
This should also avoid unnecessary requeue of the commands, creating
additional log noise and confusing some broken apps. It also avoids a
'busy' requeue of I/Os failing when we're doing recovery that takes
longer than the normal busy timeout. These I/Os failing can lead to
filesystems being unmounted in the force unmount case for I/O errors.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D33228
which will report where the epoch was entered and also
mark the tracker, so that exit will also be reported.
Helps to understand epoch entrance/exit scenarios in
complex cases, like network stack. As everything else
under EPOCH_TRACE it is a developer only tool.
Just trust the pcb database, that if we did in_pcbref(), no way
an inpcb can go away. And if we never put a dropped inpcb on
our queue, and tcp_discardcb() always removes an inpcb to be
dropped from the queue, then any inpcb on the queue is valid.
Now, to solve LOR between inpcb lock and HPTS queue lock do the
following trick. When we are about to process a certain time
slot, take the full queue of the head list into on stack list,
drop the HPTS lock and work on our queue. This of course opens
a race when an inpcb is being removed from the on stack queue,
which was already mentioned in comments. To address this race
introduce generation count into queues. If we want to remove
an inpcb with generation count mismatch, we can't do that, we
can only mark it with desired new time slot or -1 for remove.
Reviewed by: rrs
Differential revision: https://reviews.freebsd.org/D33026
The HPTS input queue is in reality used only for "delayed drops".
When a TCP stack decides to drop a connection on the output path
it can't do that due to locking protocol between main tcp_output()
and stacks. So, rack/bbr utilize HPTS to drop the connection in
a different context.
In the past the queue could also process input packets in context
of HPTS thread, but now no stack uses this, so remove this
functionality.
Reviewed by: rrs
Differential revision: https://reviews.freebsd.org/D33025
Also, make some of the functions also private to the module. Remove
unused functions discovered after that.
Reviewed by: rrs
Differential revision: https://reviews.freebsd.org/D33024
With introduction of epoch(9) synchronization to network stack the
inpcb database became protected by the network epoch together with
static network data (interfaces, addresses, etc). However, inpcb
aren't static in nature, they are created and destroyed all the
time, which creates some traffic on the epoch(9) garbage collector.
Fairly new feature of uma(9) - Safe Memory Reclamation allows to
safely free memory in page-sized batches, with virtually zero
overhead compared to uma_zfree(). However, unlike epoch(9), it
puts stricter requirement on the access to the protected memory,
needing the critical(9) section to access it. Details:
- The database is already build on CK lists, thanks to epoch(9).
- For write access nothing is changed.
- For a lookup in the database SMR section is now required.
Once the desired inpcb is found we need to transition from SMR
section to r/w lock on the inpcb itself, with a check that inpcb
isn't yet freed. This requires some compexity, since SMR section
itself is a critical(9) section. The complexity is hidden from
KPI users in inp_smr_lock().
- For a inpcb list traversal (a pcblist sysctl, or broadcast
notification) also a new KPI is provided, that hides internals of
the database - inp_next(struct inp_iterator *).
Reviewed by: rrs
Differential revision: https://reviews.freebsd.org/D33022
With upcoming changes to the inpcb synchronisation it is going to be
broken. Even its current status after the move of PCB synchronization
to the network epoch is very questionable.
This experimental feature was sponsored by Juniper but ended never to
be used in Juniper and doesn't exist in their source tree [sjg@, stevek@,
jtl@]. In the past (AFAIK, pre-epoch times) it was tried out at Netflix
[gallatin@, rrs@] with no positive result and at Yandex [ae@, melifaro@].
I'm up to resurrecting it back if there is any interest from anybody.
Reviewed by: rrs
Differential revision: https://reviews.freebsd.org/D33020
