Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18111
Fixed build issue with the EFSYS_OPT_PHY_LED_CONTROL for Huntigton and
Medford.
Submitted by: Vijay Srivastava <vijays at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18110
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18109
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18108
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18107
MC_CMD_INIT_RXQ_OUT_LEN is not used any more.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18106
For encapsulated packets, the firmware gives info about the inner frame
fields by default. When not using encapsulation offload, ask for info
about the outer frame instead.
On SFN8xxx with firmware version before v6.4.2.1007 driver reload is
needed after switching from full-feature to low-latency firmware
variant since the driver still thinks that firmware supports
encapsulation, but firmware does not tolerate request to provide info
about outer frame in Rx events.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18105
With MCDIv2, the reponse length can be to big to fit into the
CMDDONE_DATALEN field in the MCDI completion event. But rather that
the length being truncated, it can overflow into the CMDDONE_ERRNO
field (this is a longstanding firmware bug). Hence the CMDDONE_ERRNO
field may not be valid.
It isn't necessary to use the value in the CMDDONE_ERRNO field though,
so it can be ignored. The actual error code is already read from the
response header on MCDIv2 capable hardware and stored in emr_rc, so
that can be used instead.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18104
Use MCDIv2 for requests with a response size too long for MCDIv1.
Required for MC_CMD_MAC_STATS to reports the stats without using DMA.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18103
Inner checksum offloads may be used only if firmware supports
these tunnels.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18102
Remove the requirement that a device be a ACPI method battery to be supported
as a battery.
Require now that the device be in the battery devclass and implement the
get_status and get_info functions. This allows batteries which are not ACPI
method batteries to be supported.
Reviewed by: jtl
Approved by: jtl (mentor)
MFC after: 1 Month
Differential Revision: https://reviews.freebsd.org/D17434
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18101
In the case of packed stream real size of the buffer does not fit in
Rx descriptor byte count. Real size is specified on Rx queue setup.
Non-zero fake should be used to bypass hardware checks.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18100
Packed stream Rx datapath requires access to packed stream state
stored in event queue. Number of credits is upstead in event handler
on a new buffer, packets parsing on 64k boundary crossing and
Rx doorbell push to give credits back.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18099
RxQ type provides more information which may be useful to
setup event queue appropriately.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18098
Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18097
fix PreFAST issue, add missing annotation that function return value
should not be ignored. Fix alignment.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18096
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18095
The checking performed in the ->envo_type_to_partn
internal method make these assertions unnecessary.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18094
Read existing flash content before writing, so the flash write can be
avoided if the existing partition content matches the new image. This
avoids unnecessary write cycles for the flash device, and may also be
faster. If the flash does need to be updated, verify the content after
writing.
Note that reading the flash content after writing but before calling
efx_nvram-rw_finish() avoids firmware bug68170, which can lead to
signed image updates failing on Medford.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18093
If the firmware reports a non-zero write chunk size then nvram writes
may fail if a different granularity is used (e.g. for MUM firmware on
Sorrento).
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18091
Tracking which partition is locked avoids being overly conservative
when EFX_NVRAM_xxx maps to more than one partition (depnding on the
current port number).
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18090
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18089
The existing name confuses support for secure boot with
support for reporting a verify result after an NVRAM update.
As the capability only reports support for returning a verify
result, change the name to be less confusing.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18088
Extend efx_nvram_rw_finish() to return firmware verify result code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18087
This makes the verify result visible to efx_nvram_rw_finish(), which
can be extended to report it in a later patch.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18086
Simplify verify result handling in NVRAM update finish
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18085
Submitted by: Andrew Jackson <ajackson at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18083
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18082
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18081
Update efx_rx_scale_mode_set(), efx_rx_scale_key_set()
and efx_rx_scale_tbl_set().
Submitted by: Mark Spender <mspender at solarflare.com>
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18080
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18079
Rename efx_rx_scale_support_get() to efx_rx_scale_default_support_get(),
and efx_rx_hash_support_get() to efx_rx_hash_default_support_get().
All these really report is whether an exclusive RSS context was
successfully acquired at efx_rx_init().
efx_rx_scale_support_get() sounds like it reports whether the device
supports RSS, and whether exclusive or shared contexts are supported,
but it doesn't do that. Renaming it to
efx_rx_scale_default_support_get() helps to reflect that it reports
what RSS support the client gets without trying to allocate RSS
contexts itself.
Also rename efx_rx_scale_support_t to efx_rx_scale_context_type_t, to
make the enum more suitable for specifying the type of an RSS context
to be allocated.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18078
The patch adds enc_rx_scale_max_exclusive_contexts member
to nic_cfg_t structure and sets the corresponding values
for Siena, Huntington and Medford
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18077
Default RSS context check is carried out during filter
insertion on Siena and it needs to be fixed
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18076
Make the existing filter-specific define more general.
This is the same as MC_CMD_RSS_CONTEXT_ALLOC_OUT_RSS_CONTEXT_ID_INVALID.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18075
On Medford, with full-featured firmware running, encapsulated
packets may not be delivered unless filters are inserted for
them, as ordinary filters are not applied to encapsulated
packets. So filters for encapsulated packets need to be
inserted for each class of encapsulated packet. For simplicity,
catch-all filters are always inserted. These may match more
packets than the OS has asked for, but trying to insert more
precise filters increases complexity for little gain.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18074
This supports filters which match all unicast or multicast
inner frames in VXLAN, GENEVE, or NVGRE packets.
(Additional fields to match on can be added easily.)
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18073
MC_CMD_FILTER_OP_IN_EXT is needed to set filters for encapsulated
packets.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18072
VXLAN/NVGRE (and Geneve) support is available on SFN8xxx with
full-feature firmware variant running.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18071
Tx/Rx queue may be already flushed due to Tx/Rx error on the queue or
MC reboot. Caller needs to know that the queue is already flushed to
avoid waiting for flush done event.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18070
MCDI results returned in req.emr_rc have already been translated
from MC_CMD_ERR_* to errno names, so using an MC_CMD_ERR_* value
is incorrect.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18069
Improve error checking to avoid a caller overflowing the MCDI
request buffer if the requested TXQ size was excessively large.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18067
Some libefx-based drivers might need this functionality to
indicate DPCPU FW IDs as part of FW version info to assist
experienced users.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18065
If a libefx-based driver needs some way to clear port statistics,
then an MCDI agnostic method is required.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18064
