This option was imported as part of the KAME project in r62627 (in 2000).
It was turned on unconditionally in r121472 (in 2003) and has been on ever
since. The old alternative code has bitrotted. Reap the dead code.
Reported by: Ján Sučan <jansucan@gmail.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20938
This makes `camcontrol debug` also allow peripheral device specification.
While there, make BTL parser more strict and switch from strtok() to
strsep().
MFC after: 2 weeks
having their check hashes recomputed which resulted in spurious inode
check-hash errors when the system came back up after a crash.
Reported by: Alan Somers
Sponsored by: Netflix
trimming so that a geli device isn't detached before swapon is
invoked.
Submitted by: sigsys_gmail.com
Discussed with: alc
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D21006
AMA replaced HPA in ACS-3 specification. It allows to limit size of the
disk alike to HPA, but declares inaccessible data as indeterminate. One
of its practical use cases is to under-provision SATA SSDs for better
reliability and performance.
While there, fix HPA Security detection/reporting.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
These are mostly compatible with Linux, with three exceptions.
1. We don't do metadata segment stuff. Our passthrough interface
doesn't cope. The code is there, but generates an error.
2. Linux lets you specify a namespace ID for the command. We current
do not: we get ours from the namespace device, or pass in a generic
one. Generally, this will lead to the same command, but FreeBSD's
is safer since you can't specify the wrong id.
3. --show-command outputs to stderr instead of stdout so you can both
see your command, and capture its output with a simple redirect.
Differential Revision: https://reviews.freebsd.org/D19296
Create a set of routines and structures to hold the data for the args
for a command. Use them to generate help and to parse args. Convert
all the current commands over to the new format. "comnd" is a hat-tip
to the TOPS-20 %COMND JSYS that (very) loosely inspired much of the
subsequent command line notions in the industry, but this is far
simpler (the %COMND man page is longer than this code) and not in the
kernel... Also, it implements today's de-facto
command [verb]+ [opts]* [args]*
format rather than the old, archaic TOPS-20 command format :)
This is a snapshot of a work in progress to get the nvme passthru
stuff committed. In time it will become a private library and used
by some other programs in the tree that conform to the above pattern.
Differential Revision: https://reviews.freebsd.org/D19296
gcc hates dt < CC_DT_NONE since it can never be true when dt is an unsigned
type. Since that's a compiler choice and may be affected by weird stuff, instead
use (unsigned)dt > CC_DT_UNKNOWN to test for bounds error since that will work
regardless of the signedness of dt.
List the device's protocol. The returned value is one of the following:
ata direct attach ATA or SATA device
satl a SATA device attached via SAS
scsi A parallel SCSI or SAS
nvme A direct attached NVMe device
mmcsd A MMC or SD attached device
Reviewed by: scottl@, rpokala@
Differential Revision: https://reviews.freebsd.org/D20950
Most people know SAS attached SATA devices by the name SAT or SATL
(with the latter being a little more common). Change the device type
ATA_BEHIND_SCSI to SATL since it's more specific and meaningful.
Suggested by: scottl@
We remove IPSEC only in parts of the tree, and not others. RELEASE_CRUNCH to
disable it has not kept up with all its uses. Remove it. Should there be a real
need to disable IPSEC, one that hasn't shown up in the base system to date,
it can be re-added behind a WITHOUT_IPSEC build option.
We've not used this in years since we retired sysinstall, and it
hasn't compiled in at least a year. A full camcontrol is only 180k, so
making it smaller is not as important as it once was.
OK'd by: ken@, scottl@
is to notify the kernel that the file system is untrusted and it
should use more extensive checks on the file-system's metadata
before using it. This option is intended to be used when mounting
file systems from untrusted media such as USB memory sticks or other
externally-provided media.
It will initially be used by the UFS/FFS file system, but should
likely be expanded to be used by other file systems that may appear
on external media like msdosfs, exfat, and ext2fs.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20786
Unmapped mbufs allow sendfile to carry multiple pages of data in a
single mbuf, without mapping those pages. It is a requirement for
Netflix's in-kernel TLS, and provides a 5-10% CPU savings on heavy web
serving workloads when used by sendfile, due to effectively
compressing socket buffers by an order of magnitude, and hence
reducing cache misses.
For this new external mbuf buffer type (EXT_PGS), the ext_buf pointer
now points to a struct mbuf_ext_pgs structure instead of a data
buffer. This structure contains an array of physical addresses (this
reduces cache misses compared to an earlier version that stored an
array of vm_page_t pointers). It also stores additional fields needed
for in-kernel TLS such as the TLS header and trailer data that are
currently unused. To more easily detect these mbufs, the M_NOMAP flag
is set in m_flags in addition to M_EXT.
Various functions like m_copydata() have been updated to safely access
packet contents (using uiomove_fromphys()), to make things like BPF
safe.
NIC drivers advertise support for unmapped mbufs on transmit via a new
IFCAP_NOMAP capability. This capability can be toggled via the new
'nomap' and '-nomap' ifconfig(8) commands. For NIC drivers that only
transmit packet contents via DMA and use bus_dma, adding the
capability to if_capabilities and if_capenable should be all that is
required.
If a NIC does not support unmapped mbufs, they are converted to a
chain of mapped mbufs (using sf_bufs to provide the mapping) in
ip_output or ip6_output. If an unmapped mbuf requires software
checksums, it is also converted to a chain of mapped mbufs before
computing the checksum.
Submitted by: gallatin (earlier version)
Reviewed by: gallatin, hselasky, rrs
Discussed with: ae, kp (firewalls)
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20616
bectl advertises that it has the ability to create recursive and
non-recursive boot environments. This patch implements that functionality
using the be_create_depth API provided by libbe. With this patch, bectl now
works as bectl(8) describes in regards to creating recursive/non-recursive
boot environments.
Submitted by: Rob Fairbanks <rob.fx907 gmail com> (with minor changes)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20240
PR/238816 initially addressed updates to usage() however the PR has
morphed into a shopping list of updates to usage() and man pages.
PR: 238816 (I added to the list during discussion)
MFC after: 1 week
Otherwise they are leaked, allowing an attacker to trigger memory
exhaustion.
This is options.c rev. 1.70 from OpenBSD.
admbugs: 552
Obtained from: OpenBSD
MFC after: 3 days
A mixture of IP or UDP packets with valid and invalid checksum could
cause {ip,udp}_packets_bad_checksum to wrap around to 0, resulting
in a division by zero.
This is packet.c rev. 1.27 from OpenBSD.
admbugs: 552
Obtained from: OpenBSD
MFC after: 3 days
Also modify it a bit. Now -c option omits only 'from any to any' part
and works for different protocols (not just for ip).
Reported by: Dmitry Selivanov <dseliv at gmail>
MFC after: 1 week
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
'-E' appears on the swapon command line, or if "trimonce" appears as
an fstab option.
Discussed at: BSDCAN
Tested by: markj
Reviewed by: markj
Approved by: markj (mentor)
Differential Revision:https://reviews.freebsd.org/D20599
With this opcode it is possible to match TCP packets with specified
MSS option, whose value corresponds to configured in opcode value.
It is allowed to specify single value, range of values, or array of
specific values or ranges. E.g.
# ipfw add deny log tcp from any to any tcpmss 0-500
Reviewed by: melifaro,bcr
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
CID 1400451: case 0 is missing a break/return and falling through to the
default case. waitpid(0, ...) makes little sense in the child, we likely
wanted to terminate immediately.
CID 1400453: size argument uses sizeof(char **) instead of sizeof(char *)
and is assigned to a char **; sizeof's match but "this isn't a portable
assumption".
CID: 1400451, 1400453
MFC after: 3 days
command to simplify firewall reloading.
The `missing` option suppresses EEXIST error code, but does check that
existing table has the same parameters as new one. The `or-flush` option
implies `missing` option and additionally does flush for table if it
is already exist.
Submitted by: lev
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18339
Fixed by r348215, bectl ujail first attempts the trivial fetch of a jid by
passing the first argument to 'ujail' to jail_getid(3) in case a jid/name
have been passed in instead of a BE name. For numerically named BEs, this
was doing the wrong thing: instead of failing to locate the jid specified
and falling back to mountpath search, jail_getid(3) would return the input
as-is.
While here, I've fixed bectl_jail_cleanup which still used a hard-coded pool
name that was overlooked w.r.t. other work that was in-flight around the
same time.
MFC after: 3 days
Add Chacha20 mode to Encrypted Kernel Crash Dumps.
Chacha20 does not require messages to be multiples of block size, so it is
valid to use the cipher on non-block-sized messages without the explicit
padding AES-CBC would require. Therefore, allow use with simultaneous dump
compression. (Continue to disallow use of AES-CBC EKCD with compression.)
dumpon(8) gains a -C cipher flag to select between chacha and aes-cbc.
It defaults to chacha if no -C option is provided. The man page documents this
behavior.
Relnotes: sure
Sponsored by: Dell EMC Isilon
In commit r345845, a portion of documentation for the create subcommand was
removed. Specifically, for creating a snapshot of an existing boot
environment. bectl even has a test-case for this functionality.
Removing the sub-command description was discussed in PR 235850.
This patch brings back the second "create" description that was originally
in place. Albeit, with a few wording/clarifying changes.
Submitted by: Rob Fairbanks <rob.fx907 gmail com>
Reviewed by: kevans
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20249
found by Coverity. However, upon closer inspection the implementation of
fsck_ffs's fsck_readdir() and dircheck() functions is both nearly impossible
to follow and fails to check / fix directories in several cases. So, this
revision is an entire rewrite of these two functions to clarify what they
are doing and also to get something that works properly.
Referred by: cem
Reviewed by: kib, David G Lawrence
MFC after: 3 days
CID 1401317: namlen may be used uninitialized