The vfs.mountroot.timeout tunable and .timeout directive in a mount.conf(5)
file allow specifying a wait timeout for the device(s) hosting the root
filesystem to become usable. The current mechanism for waiting for devices
and detecting their availability can't be used for zfs-hosted filesystems.
See the comment #20 in the PR for some expanded detail on these points.
This change adds retry logic to the actual root filesystem mount. That is,
insted of relying on device availability using device name lookups, it uses
the kernel_mount() call itself to detect whether the filesystem can be
mounted, and loops until it succeeds or the configured timeout is exceeded.
These changes are based on the patch attached to the PR, but it's rewritten
enough that all mistakes belong to me.
PR: 208882
X-MFC after: sufficient testing, and hopefully in time for 11.1
this check on open, but "iscsictl -M", or an iSCSI redirect received by
iscsid(8) could end up with two sessions with the same target name and
portal.
MFC after: 2 weeks
Upstream DTBs don't provide IRQ lines for the RNG. Moreover, harvesting
bytes as often as the RNG interrupt is triggered (87 times per sec) is an
overkill.
For these reasons, get rid of the interrupt mode and make callout mode the
default, with random bits harvested every 4 seconds.
Submitted by: Sylvain Garrigues <sylgar@gmail.com>
Reviewed by: ian, imp, manu, mmel
Approved by: emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14541
If tftpd receives a command with an unknown opcode, it simply exits 1. It
doesn't send an ERROR packet, and the client will hang waiting for one. Fix
it.
PR: 226005
MFC after: 3 weeks
On a WRQ (write request) tftpd checks whether the client has access
permission for the file in question. If not, then the write is prevented.
However, tftpd doesn't reply with an ERROR packet, nor does it abort.
Instead, it tries to receive the packet anyway.
The symptom is slightly different depending on the nature of the error. If
the target file is nonexistent and tftpd lacks permission to create it, then
tftpd will willingly receive the file, but not write it anywhere. If the
file exists but is not writable, then tftpd will fail to ACK to WRQ.
PR: 225996
MFC after: 3 weeks
tftpd(8) says that files may only be written if they already exist and are
publicly writable. tftpd.c verifies that a file is publicly writable if it
uses an absolute pathname. However, if the pathname is relative, that check
is skipped. Fix it.
Note that this is not a security vulnerability, because the transfer
ultimately doesn't work unless the file already exists and is owned by user
nobody. Also, this bug does not affect the default configuration, because
the default uses the "-s" option which makes all pathnames absolute.
PR: 226004
MFC after: 3 weeks
Apply patch submitted with PR 217159 to make ps use unlimited
width when not associated with a terminal (i.e., none of stdout, stdin,
or stderr is a tty). Update comments and man page correspondingly.
This change was requested to work around lack of -ww in scripts from
third-party packages, including Hadoop, and adds a small measure of
Linux compatibility. Hopefully few if any non-interactive scripts
depend on the old default of 79.
PR: 217159
Submitted by: n.deepak at gmail.com
Reviewed by: vangyzen jhb
Differential Revision: https://reviews.freebsd.org/D14614
Most sysctl nodes only return a single value, but some nodes return an
array of values (e.g. kern.cp_time). sysctl(8) understand how to display
the values of a node that returns multiple values (it prints out each
numeric value separated by spaces). However, until now sysctl(8) has
only been able to set sysctl nodes to a single value. This change
allows sysctl to accept a new value for a numeric sysctl node that contains
multiple values separated by either spaces or commas. sysctl(8) parses
this list into an array of values and passes the array as the "new" value
to sysctl(2).
Reviewed by: rpokala
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14569
On an RRQ, tftpd doesn't exit as soon as it's finished receiving a file.
Instead, it waits five seconds just in case the client didn't receive the
server's last ACK and decides to resend the final DATA packet.
Unfortunately, this created a 5 second delay from when the client thinks
it's done sending the file, and when the file is available for other
processes.
Fix this bug by closing the file as soon as receipt is finished.
PR: 157700
Reported by: Barry Mishler <barry_mishler@yahoo.com>
MFC after: 3 weeks
With autodetection turned on, hitting the filesystem everytime we need to
calculate choices for the kernel carousel is kind of slow. Cache once on the
first listing and reload it anytime the config is reloaded in case any of
the loader.conf(5) changes that affect this (kernel, kernels,
kernels_autodetect) have changed. This also picks up the case where we've
changed currdev and the autodetected kernels could change.
Usually this is just ignored:
/usr/bin/ld: skipping incompatible /scratch/obj/root/git/freebsd/amd64.amd64/obj-lib32/lib/libz/libz.so when searching for -lz
/usr/bin/ld: skipping incompatible /scratch/obj/root/git/freebsd/amd64.amd64/obj-lib32/lib/libz/libz.a when searching for -lz
However some combination of newer toolchains simply fail here instead:
/usr/bin/ld: error: /home/dstolfa/obj/home/dstolfa/cadets/amd64.amd64/obj-lib32/lib/libz/libz.so is incompatible with /usr/lib/crt1.o
Libz is not needed for mkmagic so just exclude it.
Reported by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
MFC after: 2 weeks
Sponsored by: Dell EMC
Remove how to format K&R stuff. The project hasn't been using it in
new code for a long time. It's so obsolete, we don't need a statement
to never use it. Add a statement requesting that comments about
parameters be preserved when converting to ASNI style, per Kirk.
Differential Revision: https://reviews.freebsd.org/D14051
tftpd(8) is difficult to test in isolation due to its relationship with
inetd. Create a test program that mimics the behavior of tftp(1) and
inetd(8) and verifies tftpd's response in several different scenarios.
These test cases cover all of the basic TFTP protocol, but not the optional
parts.
PR: 157700
PR: 225996
PR: 226004
PR: 226005
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D14310
When complete_all() is called there might be multiple waiters. The
current implementation could only handle one waiter. Make sure the
completion is sticky when complete_all() is called to be compatible
with Linux.
Found by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
Move copy-pasted code for RTS/CTS frame allocation into net80211.
While here, add stat / debug message for allocation failures
(copied from run(4)) + return error here in bwn(4).
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D14628
This seems to no be needed on supported hardware as they are cache-coherent,
however this may not be the case on all platforms.
Sponsored by: DARPA, AFRL
[ARM] Fix for PR36577
Don't PerformSHLSimplify if the given node is used by a node that
also uses a constant because we may get stuck in an infinite combine
loop.
bugzilla: https://bugs.llvm.org/show_bug.cgi?id=36577
Patch by Sam Parker.
Differential Revision: https://reviews.llvm.org/D44097
This fixes a hang when compiling one particular file in java/openjdk8
for armv6 and armv7.
Reported by: swills
PR: 226388
rrs - Lets make the LRO code look for true dup-acks and window update acks
fly on through and combine.
rrs - Make the LRO engine a bit more aware of ack-only seq space. Lets not
have it incorrectly wipe out newer acks for older acks when we have
out-of-order acks (common in wifi environments).
jeggleston - LRO eating window updates
Based on all of the above I think we are RFC compliant doing it this way:
https://tools.ietf.org/html/rfc1122
section 4.2.2.16
"Note that TCP has a heuristic to select the latest window update despite
possible datagram reordering; as a result, it may ignore a window update with
a smaller window than previously offered if neither the sequence number nor the
acknowledgment number is increased."
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
Reviewed by: rstone gallatin
Sponsored by: NetFlix and Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14540
The lookup_host() helper subroutine emits a struct in_addr value in network
byte order via caller passed pointer. However, the table value is expected
to be stored in host byte order. On little-endian machines, this produced a
reversed endian table value for Legacy or IPv4 table types when the value
was a hostname (instead of a plain IP address).
Fix by using ntohl() on the output 32-bit address.
While here, avoid some aliasing violations by storing the lookup_host()
output in an intermediate object of the correct type.
PR: 226429
Reported by: bugs.freebsd.org AT mx.zzux.com (also: Tested by)
Security: ipfw hostname table rules could potentially not act as admin intended
Sponsored by: Dell EMC Isilon
There is a difference when parsing a completion entry between Ethernet
and IB ports. When link layer is Ethernet the bits describe the type of
L3 header in the packet. In the case when link layer is Ethernet and VLAN
header is present the value of SL is equal to the 3 UP bits in the VLAN
header. If VLAN header is not present then the SL is undefined and consumer
of the completion should check if IB_WC_WITH_VLAN is set.
While that, this patch also fills the vlan_id field in the completion if
present.
linux commit 12f8fedef2ec94c783f929126b20440a01512c14
MFC after: 1 week
Sponsored by: Mellanox Technologies
mlx5core.
Do not consider the inability to create a firmware dump fatal, but
inform about the situation and allow the driver to attach. The device
might not implement the needed VSC, or we might not know the layout of
the registers map. In either case, only firmware dump functionality is
limited, the network operations should be fine.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
