framework has significantly changed the driver has moved to a new file.
While it shares some code with the existing driver this has been modified
to work better with the intrng framework.
This has been tested on the ThunderX servers in the netperf cluster and has
been used to boot them for other testing, including DTrace and hwpmc.
With this we can use intrng on all supported arm64 platforms I was able to
test on. It is expected we will move to intrng soon, and disable the old
arm64 interrupt framework.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6437
a non-zero ID. To do this we increment the cpuid of any CPUs with a smaller
devicetree ID by one to stop them conflicting with the boot CPU.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
this to be the case. This will mean we don't try and handle the cache in
bus_dmamap_sync when it is not needed.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6605
tested on the Pass 1.1 and 2.0 ThunderX machines in the Netperf cluster.
Reviewed by: jhb
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6453
needed in later changes where we may not be able to lock the pic list lock
to perform a lookup, e.g. from within interrupt context.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Allow to deallocate previously allocated ITS device along with
its interrupts. Interrupt numbers are being freed when the last
LPI number is no longer busy.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6351
supports the Security Extensions or not. This bit is not the same as the CPU one.
Currently we are not checking for either before trying to write to the special
registers. This can lead to problems on hardware or simulators that do not
provide the security extensions. Add the missing checks. Their interactions with
the CPU flag is not entirely clear to me but using a macro will make it easier
to quickly adjust the condition once the CPU bits are sorted as well.
Reviewed by: br
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D6397
* In gic_v3_attach free the correct data on failure.
* Implement gic_v3_teardown_intr.
* Update the panic string when enabling/disabling an invalid interrupt.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
MSI or MSI-X interrupts, however this is enought to boot FreeBSD under the
ARM Foundation Model with a GICv3 interrupt controller.
Approved by: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
updated, and until further testing can be done, this is disabled for now.
It is expected arm64 will switch to this interface, and the old interface
will be removed before 11.0 is released.
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
translate the pci rid to a controller ID. The translation could be based
on the 'msi-map' OFW property, a similar ACPI option, or hard-coded for
hardware lacking the above options.
Reviewed by: wma
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
disabled, however when we enable it it will default to assume memory is
not cache-coherent, unless either the tag was created or the parent was
marked as cache-coherent.
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
list of memory that the kernel will need to sync when operating with a
non-cache coherent DMA engine.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
to ensure ordering between the CPU and device. As the CPU and DMA target
may be in different shareability domains they need to be full system
barriers.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
To maintain coherence between cache and DMA memory appropriate
shareability flags need to be set in the PTE regardless of SMP
option.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6231
attachment. This is where it will live when we import intrng as it will
need to look at either the msi-parent or msi-map FDT properties.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
PCI-express HotPlug support is implemented via bits in the slot
registers of the PCI-express capability of the downstream port along
with an interrupt that triggers when bits in the slot status register
change.
This is implemented for FreeBSD by adding HotPlug support to the
PCI-PCI bridge driver which attaches to the virtual PCI-PCI bridges
representing downstream ports on HotPlug slots. The PCI-PCI bridge
driver registers an interrupt handler to receive HotPlug events. It
also uses the slot registers to determine the current HotPlug state
and drive an internal HotPlug state machine. For simplicty of
implementation, the PCI-PCI bridge device detaches and deletes the
child PCI device when a card is removed from a slot and creates and
attaches a PCI child device when a card is inserted into the slot.
The PCI-PCI bridge driver provides a bus_child_present which claims
that child devices are present on HotPlug-capable slots only when a
card is inserted. Rather than requiring a timeout in the RC for
config accesses to not-present children, the pcib_read/write_config
methods fail all requests when a card is not present (or not yet
ready).
These changes include support for various optional HotPlug
capabilities such as a power controller, mechanical latch,
electro-mechanical interlock, indicators, and an attention button.
It also includes support for devices which require waiting for
command completion events before initiating a subsequent HotPlug
command. However, it has only been tested on ExpressCard systems
which support surprise removal and have none of these optional
capabilities.
PCI-express HotPlug support is conditional on the PCI_HP option
which is enabled by default on arm64, x86, and powerpc.
Reviewed by: adrian, imp, vangyzen (older versions)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6136
boot issues when booting with FDT. It is planned to re-enable this at a
later date.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
arm_gic_fdt_alloc_resource. These were the old u_long where they should be
rman_res_t. Both of these are the same size on arm64 so this is just for
correctness, and would not have led to incorrect behaviour.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
the physmap. This will reduce the likelihood of an issue where we have
device memory mapped in the DMAP. This can only happen if it is within the
same 1G block of normal memory.
Reviewed by: kib
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5938
2TB. The latter can be increased in 512GB chunks by adjusting the lower
address, however more work will be needed to increase the former.
There is still some work needed to only create a DMAP region for the RAM
address space as on ARM architectures all mappings should have the same
memory attributes, and these will be different for device and normal memory.
Reviewed by: kib
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5859
SR-IOV devices usually use Alternative Routing ID (ARI).
In that case slot/device is always assumed to be 0 and
function/identifier is extended to 8 bits.
Fix interrupts delivery to VF IDs beyond 8 by using a correct
DevID if ARI is enabled.
Reviewed by: jhb, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5855
We're currently seeing how hard it would be to run CloudABI binaries on
operating systems cannot be modified easily (Windows, Mac OS X). The
idea is that we want to just run them without any sandboxing. Now
that CloudABI executables are PIE, this is already a bit easier, but TLS
is still problematic:
- CloudABI executables want to write to the %fs, which typically
requires extra system calls by the emulator every time it needs to
switch between CloudABI's and its own TLS.
- If CloudABI executables overwrite the %fs base unconditionally, it
also becomes harder for the emulator to store a backup of the old
value of %fs. To solve this, let's no longer overwrite %fs, but just
%fs:0.
As CloudABI's C library does not use a TCB, this space can now be used
by an emulator to keep track of its internal state. The executable can
now safely overwrite %fs:0, as long as it makes sure that the TCB is
copied over to the new TLS area.
Ensure that there is an initial TLS area set up when the process starts,
only containing a bogus TCB. We don't really care about its contents on
FreeBSD.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5836
Allow using DTRACE for performance analysis of userspace
applications - the function call stack can be captured.
This is almost an exact copy of AMD64 solution.
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: emaste, gnn, jhibbits
Differential Revision: https://reviews.freebsd.org/D5779
many SoCs these two are the same, however there is no requirement for this
to be the case, e.g. on the ARM Juno we boot on what the GIC thinks of as
CPU 2, but FreeBSD numbers it CPU 0.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
This optimization attempts to utylize as wide as possible register store instructions to zero large buffers.
The implementation, if possible, will use 'dc zva' to zero buffer by cache lines.
Speedup: 60x faster memory zeroing
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5726
- Set BI_CAN_EXEC_DYN, so we can execute ET_DYN ELF files in addition to
regular ET_EXECs.
- Provide an AT_BASE entry in the auxiliary vector, so the executable
knows at which address it got loaded and can apply relocations.
increased to 256TiB. The kernel address space can also be increased to be
the same size, but this will be performed in a later change.
To help work with an extra level of page tables two new functions have
been added, one to file the lowest level table entry, and one to find the
block/page level. Both of these find the entry for a given pmap and virtual
address.
This has been tested with a combination of buildworld, stress2 tests, and
by using sort to consume a large amount of memory by sorting /dev/zero. No
new issues are known to be present from this change.
Reviewed by: kib
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5720
different ID space than the kernel. Because of this we need to read the
ID from the hardware. The hardware will provide this value to the CPU by
reading any of the first 8 Interrupt Processor Targets Registers.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5706
Big buffer size could cause integer overflow and as a result
attempt to copy beyond VM_USERMAX_ADDRESS.
Fixing copyinstr boundary checking where compared value has been
overwritten by accident when setting fault handler.
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5719
The first of set of patches.
Use wider load/stores when aligned buffer is being copied.
In a simple test:
dd if=/dev/zero of=/dev/null bs=1M count=1024
the performance jumped from 410MB/s up to 3.6GB/s.
TODO:
- better handling of unaligned buffers (WiP)
- implement similar mechanism to bzero
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: kib, andrew, emaste
Differential Revision: https://reviews.freebsd.org/D5664
from userpsace. Previously we could have triggered a panic by trying to
jump to a kernel address from userland as the trap handling code thought we
received an ast in kernel mode.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
It seems that if range within one page is given this page will not be
invalidated at all. Clean it up.
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: wma, zbb
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D5569
- Advertise the word size for CloudABI ABIs via the SV_LP64 flag. All of
the other ABIs include either SV_ILP32 or SV_LP64.
- Fix kdump to not assume a 32-bit ABI if the ABI flags field is non-zero
but SV_LP64 isn't set. Instead, only assume a 32-bit ABI if SV_ILP32 is
set and fallback to the unknown value of "00" if neither SV_LP64 nor
SV_ILP32 is set.
Reviewed by: kib, ed
Differential Revision: https://reviews.freebsd.org/D5560
Need this for gem5, but was not needed on real hadrware (yet) as it
was always MSI.
Reviewed by: andrew, jhb
Discovered by: andrew
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D5494
Things changed:
* do not allocate 4GB of SLI space, because it's the waste of
system resources. Allocate only small portions when needed.
* provide own implementation of activate_resource which performs
address translation between PCI bus and host PA address space.
This is temporary solution, should be replaced by bus_map_resource
once implemented.
Obtained from: Semihalf
Sponsored by: Cavium
Approved by: cognet (mentor)
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D5294
Enable system register access for EL2. Alpine-V2 is
the first device requiring this to be enabled.
It is also in-sync with Linux initialization code,
and compatible with Alpine-V2 uboot requirements.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Approved by: cognet (mentor)
Reviewed by: wma
Differential revision: https://reviews.freebsd.org/D5394
Summary:
As part of the migration of rman_res_t to be typed to uintmax_t, memory ranges
must be clamped appropriately for the bus, to prevent completely bogus addresses
from being used.
This is extracted from D4544.
Reviewed By: cem
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5134
If Enhanced Allocation is not used, we can't allocate any random
range. All internal devices have hardcoded place where they can
be located within PCI address space. Fortunately, we can read
this value from BAR.
Obtained from: Semihalf
Sponsored by: Cavium
Approved by: cognet (mentor)
Reviewed by: zbb
Differential revision: https://reviews.freebsd.org/D5455
* provided OFW interface for pci_host_generic (for handling devices which are present in DTS under the PCI node)
* removed support for internal PCI from arm64/cavium
* cleaned up and made most of the code common
Obtained from: Semihalf
Sponsored by: Cavium
Approved by: cognet (mentor)
Reviewed by: zbb
Differential revision: https://reviews.freebsd.org/D5261
need to include it explicitly when <vm/vm_param.h> is already included.
Suggested by: alc
Reviewed by: alc
Differential Revision: https://reviews.freebsd.org/D5379
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
Provide bus_get_bus_tag() for sparc64, powerpc, arm, arm64 and mips
nexus and its children in order to return a platform specific default tag.
This is required to ensure generic correctness of the bus_space tag.
It is especially needed for arches where child bus tag does not match
the parent bus tag. This solves the problem with ppc architecture
where the PCI bus tag differs from parent bus tag which is big-endian.
This commit is a part of the following patch:
https://reviews.freebsd.org/D4879
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Annapurna Labs
Reviewed by: jhibbits, mmel
Differential Revision: https://reviews.freebsd.org/D4879
will allow for code that uses the old fdt_get_range and fdt_regsize
functions to find a range, map it, access, then unmap to replace this, up
to and including the map, with a call to OF_decode_addr.
As this function should only be used in the early boot code the unmap is
mostly do document we no longer need the mapping as it's a no-op, at least
on arm.
Reviewed by: jhibbits
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5258
Some chip revisions don't have their external PCIe buses
behind the internal bridge. Add support for FDT-configurable
PEMs but keep ability for PCIe enumeration.
Reviewed by: andrew, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5285
values.
If switching from a thread that used floating-point registers to a thread
that is still running, but holding the blocked_lock lock we would switch
the curthread to the new (running) thread, then call critical_enter. This
will non-atomically increment td_critnest, and later call critical_exit to
non-atomically decrement this value.
This can happen at the same time as the new thread is still running on the
old core, also calling these functions. In this case there will be a race
between these non-atomic operations. This can be an issue as we could loose
one of these operations leading to the value to not return to zero.
If, later on, we then hit a data abort we check if the td_critnest is zero.
If this check fails we will panic the kernel.
This has been observed when running pcmstat on a Cavium ThunderX. The pcm
thread will use the blocked_lock lock and there is a high chance userspace
will use the floating-point registers. When, later on, pmcstat triggers a
data abort we will hit this panic.
The fix is to update these values after storing the floating-point state.
This means we use the correct curthread while storing the state so it will
not be an issue that the changes to td_critnest are non-atomic.
Sponsored by: ABT Systems Ltd
- Add MOVI command and routine for the LPI migration
- Allow to search for the ITS device descriptor using
not only devID but also LPI number.
- Bind SPIs in the Distributor
- Don't bind its_dev to collection. Keep track of the collection
IDs for each LPI.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5231
- Change locks' names to be more suitable
- Don't use blocking mutex. Lock only basic operations such
as lists or bitmaps modifications.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5230
This should be done by routing all interrupts to CPU0,
different assignment will be induced by either interrupts
shuffling or bus_bind_intr().
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5229
pmc_hook() was called only in case of the stray interrupt but should
rather be called on each interrupt. Move in to the arm_cpu_intr()
handler, out of the critical section too.
Reviewed by: br
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5161
It can be used to bind specific interrupt to a particular CPU.
Requires PIC support for interrupts binding.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5122
Separate interrupt descriptors lookup from allocation. It was possible
to perform config on non-existing interrupt simply by allocating spurious
descriptor.
Must lock the interrupt descriptors table lookup to avoid mismatches.
This ought to prevent trouble while setting up new interrupt
and dispatching existing one.
Use spin mutex rather than sleep mutex. This is mainly due to lock in
arm_dispatch_intr.
This should be eventually changed to a lock-less solution without
walking through a linked list on each interrupt.
Reviewed by: andrew, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5121
* Use the Linux compat string
* Use EARLY_DRIVER_MODULE to attach at the right time
* Add a generic A10 kernel config file
* A20 now use generic_timer
* Add two new dts files for Olimex boards
* Update our custom DTS file for A10 and A20 to use the same compatible
property names as the vendor ones.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4792
Prevent the function from null-pointer-dereference when unexisting
mapping is being processed.
Obtained from: Semihalf
Sponsored by: Cavium
Approved by: cognet (mentor)
Reviewed by: zbb, cognet
Differential revision: https://reviews.freebsd.org/D5228
16-byte value. With this the hardware will check if a memory access uses
an incorrectly aligned stack pointer as the base address.
Sponsored by: ABT Systems Ltd
number of physical memory locations we can access. This is the case on
some HiKey boards that may have UEFI reserved memory dispersed through the
physical space.
Sponsored by: ABT Systems Ltd
the processor and debug state registers. A flag has been added to the pcb
to tell us when to enable single stepping for a given thread.
Reviewed by: kib
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4730
There is no explanation why IPI ID is incremented here by "16".
This should have been removed in r285533 but somehow survived.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5120
Provide an easy to use framework for ARM64 DDB disassembler.
This commit does not contain full list of instruction opcodes.
Obtained from: Semihalf
Sponsored by: Cavium
Approved by: cognet (mentor)
Reviewed by: zbb, andrew, cognet
Differential revision: https://reviews.freebsd.org/D5114
ofw_bus_get_node() must be tested against negative values since
missing parent bus method will result in calling the default method
which simply returns (-1): sys/dev/ofw/ofw_bus_if.m
This was lost in the review process.
Obtained from: Semihalf
Sponsored by: Cavium
New ThunderX firmware incorporates modified DTB that presents
different device hierarchy. In the new device tree, MDIO
devices are below two additional buses that oddly hang on
PCI bridge.
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5069
- Avoid using BUS_ macros as bus_generic_ functions should be used instead.
- Fix mistaken device_t pointers in thunder_pcie_alloc_resource.
Should use dev->parent method and allocate resource for child device
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5068
- Separate FDT and general PCIe driver parts
- Drop some irrelevant printfs that cannot be displayed in
FDT attach
- Move ranges parsing to FDT portion of PCIe code
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5067
The code should be comparing pointers, not any data
gathered from a blocked_lock.
Spotted by: cognet
Approved by: zbb, cognet (mentor)
Differential revision: https://reviews.freebsd.org/D5100
POSIX requires these members to be of type void * rather than the
char * inherited from 4BSD. NetBSD and OpenBSD both changed their
fields to void * back in 1998. No new build failures were reported
via an exp-run.
PR: 206503 (exp-run)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5092
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
Rename gic_v3_ instances to simply use 'gic' and 'its'.
The information about the controller's revision is printed
in the device announcement during boot anyway.
The intention behind this change is to avoid somewhat misleading
GIC instances naming such as:
gic_v30
gic_v31
...
etc.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5016
Avoid probing GICv2m to any parent bus/driver. Instead, match
GICv2m driver with FDT complatible strings as not every GIC
has a MSI controller in the form of GICv2m extension.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5015
Add VFS_AIO to generic config to allow using of high-performance
asynchronous disk AIO operation.
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4979
In recent EFI the DTS entries changed for PCIe controller.
This commit fixes internal PCIe, external is yet TBD.
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4976
tree parsing opt-out rather than opt-in. All FDT-based systems as well as
PowerPC systems with real Open Firmware use the CHRP-derived binding that
includes it, which makes SPARC the odd man out here. Making it opt-out
avoids astonishment on new platform bring up.
providing compiled-in static environment data that is used instead of any
data passed in from a boot loader.
Previously 'env' worked only on i386 and arm xscale systems, because it
required the MD startup code to examine the global envmode variable and
decide whether to use static_env or an environment obtained from the boot
loader, and set the global kern_envp accordingly. Most startup code wasn't
doing so. Making things even more complex, some mips startup code uses an
alternate scheme that involves calling init_static_kenv() to pass an empty
buffer and its size, then uses a series of kern_setenv() calls to populate
that buffer.
Now all MD startup code calls init_static_kenv(), and that routine provides
a single point where envmode is checked and the decision is made whether to
use the compiled-in static_kenv or the values provided by the MD code.
The routine also continues to serve its original purpose for mips; if a
non-zero buffer size is passed the routine installs the empty buffer ready
to accept kern_setenv() values. Now if the size is zero, the provided buffer
full of existing env data is installed. A NULL pointer can be passed if the
boot loader provides no env data; this allows the static env to be installed
if envmode is set to do so.
Most of the work here is a near-mechanical change to call the init function
instead of directly setting kern_envp. A notable exception is in xen/pv.c;
that code was originally installing a buffer full of preformatted env data
along with its non-zero size (like mips code does), which would have allowed
kern_setenv() calls to wipe out the preformatted data. Now it passes a zero
for the size so that the buffer of data it installs is treated as
non-writeable.
information on what the core supports. In most cases these will be
identical across most CPUs in the SoC, however there may be the case where,
with a big.LITTLE setup they may differ. In this case we print the
decoded data on all CPUs.
Reviewed by: kib
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4725
possible future CPU extentions with larger registers.
jmp_buf's size and alignment are baked into the ABI of third party libraries
and thus are very hard to change later so it is best to waste a small amount
of space now.
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D3956
the #address-cells property set. For this we need to read more data before
the parent interrupt description.
this is only enabled on arm64 for now as it's not quite compliant with the
ePAPR spec. We should use a default of 2 where the #address-cells property
is missing, however this will need further testing across architectures.
Obtained from: ABT Systems Ltd
Sponsored by: SoftIron Inc
Differential Revision: https://reviews.freebsd.org/D4518
the kernel. These registers are all callee saved, and as such will be
restored before returning to the exception handler.
Userland still needs these registers to be restored as they may be changed
by the kernel and we don't currently track these places.
This is (oddly) specified in the ARM Server Base System Architecture. It
extends the GICv2 to support MSI and MSI-X interrupts, however only the
latter are currently supported.
Only the FDT attachment is currently supported, however the attachment
and core driver are split to help adding ACPI support in the future.
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: SoftIron Inc
clock_gettime(2) on ARMv7 and ARMv8 systems which have architectural
generic timer hardware. It is similar how the RDTSC timer is used in
userspace on x86.
Fix a permission problem where generic timer access from EL0 (or
userspace on v7) was not properly initialized on APs.
For ARMv7, mark the stack non-executable. The shared page is added for
all arms (including ARMv8 64bit), and the signal trampoline code is
moved to the page.
Reviewed by: andrew
Discussed with: emaste, mmel
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4209
unwound through. For this we need the frame pointer (x29) to point to the
location on the stack where we stored the previous frame pointer, and link
register. To simplify this the stack pointer is only adjusted by addition
and subtraction, and not through the use of post increment on loads and
stores.
The updated frame layout is:
+------------+
| lr -- x30 |
+------------+
| fp -- x29 | <-- x29 points at this
+------------+
| Trap frame |
| ... |
| | <-- sp points at this
+------------+
The only difference is the first two items, and setting of x29.
Sponsored by: ABT Systems Ltd
atomic functions where they are almost identical, or have acquire/release
semantics.
While here clean these function up. The cbnz instruction doesn't change
the condition flags so drop cc, however they should have memory added to the
clobber list.
Reviewed by: kib
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4318
prints the trap frame, along with the exception syndrome and fault address
registers. Even though esr is 64-bits here it is only 32-bits in hardware
so only print the valid 32-bits.
While here also print esr and far when appropriate after printing the trap
frame.
Sponsored by: ABT Systems Ltd
sysent.
sv_prepsyscall is unused.
sv_sigsize and sv_sigtbl translate signal number from the FreeBSD
namespace into the ABI domain. It is only utilized on i386 for iBCS2
binaries. The issue with this approach is that signals for iBCS2 were
delivered with the FreeBSD signal frame layout, which does not follow
iBCS2. The same note is true for any other potential user if
sv_sigtbl. In other words, if ABI needs signal number translation, it
really needs custom sv_sendsig method instead.
Sponsored by: The FreeBSD Foundation
No functional change as 'struct resource *' and 'struct resource **'
have the same size, but the former is the proper type.
PR: 204768
Submitted by: David Binderman
