Merge commit 2d8c18fbbdd1 from llvm git (by Jessica Clarke):
[X86] Don't add implicit REP prefix to VIA PadLock xstore
Commit 8fa3e8fa1492 added an implicit REP prefix to all VIA PadLock
instructions, but GNU as doesn't add one to xstore, only all the others.
This resulted in a kernel panic regression in FreeBSD upon updating to
LLVM 11 (https://bugs.freebsd.org/259218) which includes the commit in
question. This partially reverts that commit.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D112355
MFC after: 3 days
This fixes panic when trying to run strace(8) from Focal.
Reviewed By: kib
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D32355
The Linux way for sendfile(2) to tell the application
to fallback to another way of copying data is by EINVAL,
not ENOTSOCK. This fixes package installation scripts
for Mono packages from Focal.
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D32604
These files were copied from MUSL. Add the standard copyright notice and
SPDX-License-Identifier: MIT consistent with our new draft license
policy. It reads word for word the same as the MIT license on the SPDX
web site. Add a pointer to the MUSL COPYIRGHT file which contains a list
of all authors of MUSL.
Sponsored by: Netflix
Noticed by: Steve Kargl
From https://github.com/Yubico/libfido2:
libfido2 provides library functionality and command-line tools to
communicate with a FIDO device over USB, and to verify attestation
and assertion signatures.
libfido2 supports the FIDO U2F (CTAP 1) and FIDO 2.0 (CTAP 2)
protocols.
libfido2 will be used by ssh to support FIDO/U2F keys. It is currently
intended only for use by ssh, and so is installed as a PRIVATELIB and is
placed in the ssh pkgbase package.
This is currently disabled for the 32-bit library build as libfido2 is
not compatible with the COMPAT_32BIT hack in usb_ioctl.h.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32448
It seems that clang IAS erronously adds repz prefix which should not be
there. Cpu would try to store around %ecx bytes of random, while we
only expect a word.
PR: 259218
Reported and tested by: Dennis Clarke <dclarke@blastwave.org>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The modification to the hash are already naturally locked by
in_control_sx. Convert the hash lists to CK lists. Remove the
in_ifaddr_rmlock. Assert the network epoch where necessary.
Most cases when the hash lookup is done the epoch is already entered.
Cover a few cases, that need entering the epoch, which mostly is
initial configuration of tunnel interfaces and multicast addresses.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D32584
This reverts commit 59eab1093a.
The change suppressed EFAULT originating from uiomove(). The deadlock
avoidance mechanism implemented by vn_io_fault1() in the VFS handles
such errors by wiring the user pages and retrying, but this change
caused read() to return early instead. This can result in short I/O,
causing misbehaviour in some applications, and possibly other
consequences.
Until this is resolved somehow, revert the commit.
Approved by: mm
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
If CAS detects that radix is not supported, set radix_mmu to 0
to avoid the kernel trying to use it and panic.
MFC after: 2 weeks
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
vm_reserv_reclaim_*() will release pages to the default freepool, not
the direct freepool from which noobj allocations are drawn. But if both
pools are empty, the noobj allocator variants must break reservations to
make progress.
Reported by: cy
Reviewed by: kib (previous version)
Fixes: b498f71bc5 ("vm_page: Add a new page allocator interface for unnamed pages")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32592
TCP Hystart draft version -03:
https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-hystartplusplus
Is a new version of hystart that allows one to carefully exit slow start if the RTT
spikes too much. The newer version has a slower-slow-start so to speak that then
kicks in for five round trips. To see if you exited too early, if not into congestion avoidance.
This commit will add that feature to our newreno CC and add the needed bits in rack to
be able to enable it.
Reviewed by: tuexen
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D32373
Fix clearing of bits in RCTL for the non-bpf/non-allmulti case.
Update RCTL after modifying the multicast filter registers as per
the Linux driver.
This fixes LACP on igc interfaces, where incoming LACP multicasti
control packets were being dropped.
Reviewed by: kbowling
Obtained from: Rubicon Communications, LLC ("Netgate")
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D32574
Correct input_sta "assertion" checks. CTS/ACK CTRL frames are shorter
then sizeof(struct ieee80211_frame_min) and were thus running into the
is_rx_tooshort error case.
Use ieee80211_anyhdrsize() to handle this better but make sure we do
at least have the first 2 octets needed for that.
While here move the safety checks before any code which may not obey
them later, just for good style.
The non-scanning check further down assumes a frame format also not
matching control frames. For now skip the checks for control frames
which allows us to deal with some of them at least now.
Sponsored by: The FreeBSD Foundation
Obtained from: 20210906 wireless v0.91 code drop
MFC after: 3 days
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D32238
While IEEE80211_R_BAND was defined, there was no place to store the
band. Add a field for that, adjust ieee80211_lookup_channel_rxstatus()
to require it, and update drivers passing "R_{FREQ|IEEE}" in already to
provide the band as well. For the moment keep the fall-back code
requiring all three fields.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D30662
Ensure that the ICMP error is returned with the correct
source and destination addresses.
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32572
When we route-to a packet that later turns out to not fit in the
outbound interface MTU we generate an ICMP error.
However, if we've already changed those (i.e. we've passed through a NAT
rule) we have to undo the transformation first.
Obtained from: pfSense
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32571
The lead digit was lost in 05eba8e068 making it impossible to find the
commit.
The two subsequent RELNOTES commits gave one less digit of the commit
hash, which is what `git rev-parse --short` thinks the minimal length is,
but keep them to align with other entries.
Fixes: 05eba8e068
Differential Revision: https://reviews.freebsd.org/D32595
This man page formerly referred to boot1.efi searching for loader.efi;
when boot1.efi was obsoleted in favour of having loader.efi launched
directly, this was left claiming that loader.efi searched for
loader.efi.
Reviewed by: bcran
Fixes: db8b561345 Rework UEFI ESP generation
Differential Revision: https://reviews.freebsd.org/D32334
In shm_largepage_phys_populate(), the result from vm_page_grab() is only
needed for assertion.
In shm_dotruncate_largepage(), there is a commented-out prototype code
for managed largepages. The oldobjsz is saved for its sake, so mark
the variable as __unused directly.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The function ignores result returned by linker_release_module().
The FW_UNLOAD flag on the file is cleared, so even on error it would
not be tried again.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
For some of them, used only when KTR or KMSAN are configured, apply
__unused attribute directly.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Mark variables as __diagused for invariant-only vars
Reviewed by: imp, mjg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32577
A future change to TOE TLS will require a software fallback for the
first few TLS records received. Future support for NIC TLS on receive
will also require a software fallback for certain cases.
Reviewed by: gallatin, hselasky
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32566
As a followup to SW KTLS assuming an OCF backend, rename
struct ocf_session to struct ktls_ocf_session and forward
declare it in <sys/ktls.h> to use as the type of
struct ktls_session.cipher.
Reviewed by: gallatin, hselasky
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32565
In particular, ktls_pending_rx_info() determines which TLS record is
at the end of the current receive socket buffer (including
not-yet-decrypted data) along with how much data in that TLS record is
not yet present in the socket buffer.
This is useful for future changes to support NIC TLS receive offload
and enhancements to TOE TLS receive offload. Those use cases need a
way to synchronize a state machine on the NIC with the TLS record
boundaries in the TCP stream.
Reviewed by: gallatin, hselasky
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32564
Stack gap code used on amd64 can also be reused for arm64. Point
sv_stackgap to elf64_stackgap to enable this feature.
Reviewed by: mw, kib, emaste
Tested by: mw
MFC: after 1 month
Differential Revision: https://reviews.freebsd.org/D32588
Notable upstream pull request merges:
#12392 Avoid panic in case of pool errors and missing L2ARC
#12448 skip snapshot in zfs_iter_mounted()
#12516 Fix NFS and large reads on older kernels
#12533 Fail invalid incremental recursive send gracefully
#12569 FreeBSD: Really zero the zero page
#12575 Reject zfs send -RI with nonexistent fromsnap
#12602 Correct refcount_add in dmu_zfetch
#12650 zpool should call zfs_nicestrtonum() with non-NULL handle
Obtained from: OpenZFS
OpenZFS commit: ec64fdb93d
There is a workaround in acpidump for an old IBM laptop. This is being
hit on a modern arm64 system causing acpidump to use the wrong field
when reading a later address.
As the laptop has a 32-bit CPU the only FreeBSD support for it is i386.
As such limit the workaround to that architecture.
Reviewed by: emaste, jkim, jhb (all earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32573
Devices in sys/dev should be architecture-independent and NOT #include
intr_machdep.h.
Reviewed by: mhorne royger
Differential Revision: https://reviews.freebsd.org/D29959
Bump the firmware version to 14.0 and set the firmware release date
to today.
Reviewed by: jhb, bz, imp
Differential Revision: https://reviews.freebsd.org/D32534
Problem is that rtld cannot reliably access updated environment.
This was made more obvious by bfd4c875a1. The application
environment can be in arbitrary state and place, system components
can observe it only during execve(2), or in case of rtld, right after
execve, when environment is still at know location and format.
Instead spawn ld-elf.so.1 in direct exec mode which can correctly read
all inherited updates to the environment.
PR: 259069
Reviewed by: arichardson, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32464
