Commit Graph

105 Commits

Author SHA1 Message Date
Alexander Motin
5b917bfc3f Add one more ID for Marvell 88SE912x chip found on Asus U3S6 card.
Submitted by:	Jonas Jonsson <fatbrain@gmail.com>
2011-04-07 08:28:53 +00:00
Alexander Motin
65c63cd22f Add some more IDs of HighPoint RocketRAID 64x. 2011-03-06 16:10:39 +00:00
Alexander Motin
fa84e0f903 Restore DH89xxCC/Patsburg chip IDs accentally dropped at r218596. 2011-02-12 13:28:50 +00:00
Alexander Motin
a7c797f063 Disable NCQ for multiport Marvell 88SX61XX SATA controllers. Simultaneous
active I/O to several disks (copying large file on ZFS) causes timeout after
just a few seconds of run. Single port 88SX6111 seems like not affected.

Skip reading transferred bytes count for these controllers. It works for
88SX6111, but 88SX6145 always returns zero there. Haven't tested others,
but better to be safe.
2011-02-12 07:06:40 +00:00
Jack F Vogel
bf0477b215 Support for the new Patsburg PCH chipset:
- SMBus Controller
     - SATA Controller
     - HD Audio Controller
     - Watchdog Controller

Thanks to Seth Heasley (seth.heasley@intel.com) for providing us code.

MFC after 3 days
2011-02-01 01:05:11 +00:00
Jack F Vogel
d5267ede37 Support for the new DH89xxCC PCH chipset including:
- SATA controller
      - Watchdog timer
      - SMBus controller
2011-01-31 18:41:52 +00:00
Alexander Motin
da839e639b Add IDs for HighPoint RocketRAID 64x controllers.
These controllers consist of two Marvell 88SE9128 6Gbps SATA chips and
PLX PCIe bridge. As result, they seem to be agree to work with ahci(4)
as usual HBAs. The only noticed issue is that RAID BIOS disables all
drive caches during boot, though `camcontrol cmd ...` is able to fix that.

Those who wants RAID functionality can still use closed proprietary driver
from HighPoint site.

MFC after:	1 week
2011-01-10 22:27:52 +00:00
Alexander Motin
ee65f30a14 Add IDs of HighPoint RocketRAID 62x cards (Marvell 88SE9128 chips).
PR:		kern/152926
Submitted by:	Mike Tancsa <mike@sentex.net>
MFC after:	1 week
2010-12-08 20:35:20 +00:00
Alexander Motin
96ecb95ed9 Fix small typo.
Submitted by:	Artem Belevich
2010-11-22 23:04:25 +00:00
Alexander Motin
ba3a999598 Teach ahci(4), siis(4) and ATA_CAM ata(4) wrapper report to CAM residual
I/O length on underruns, that often happens for some SCSI commands.
2010-11-08 15:36:15 +00:00
Alexander Motin
5b9392e840 Add missing mtx_destroy() on channel attach failure. 2010-10-25 07:41:21 +00:00
Alexander Motin
bf12976c76 Fix panic, when due to some kind of congestion on FIS-based switching
port multiplier some command triggers false positive timeout, but then
completes normally.

MFC after:	2 weeks
2010-09-16 12:39:50 +00:00
Alexander Motin
90400bed63 MFata(4):
Add Intel Cougar Point PCH SATA Controller DeviceIDs. Correct some existing
entries for Intel Ibex Peak (5 Series/3400 Series) PCH SATA controllers.
2010-08-28 07:24:45 +00:00
Alexander Motin
8edcf69406 Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to
GEOM. This information needed for proper soft-RAID's on-disk metadata
reading and writing.
2010-07-25 15:43:52 +00:00
Alexander Motin
a47eae85b4 Disable NCQ and PMP support for VIA VT8251 AHCI. It was reported to be
unreliable under load. Linux does the same.
2010-06-08 10:03:08 +00:00
Alexander Motin
dc5a530b04 Plug memory leak to silent Coverity. Error is still not really handled.
Found with:   Coverity Prevent(tm)
CID:          4130
2010-06-05 08:07:54 +00:00
Alexander Motin
c4d8fe61a1 Fix attach errors handling.
Found with:   Coverity Prevent(tm)
CID:          3424
2010-06-05 08:02:19 +00:00
Alexander Motin
cc6b610bea Fill rman range start/end values. It makes devinfo output more readable. 2010-05-22 08:30:47 +00:00
Alexander Motin
445cc79ca9 Report ATA/SATA channel number to NewBus at location string. 2010-05-22 07:32:47 +00:00
Alexander Motin
6533cd198d Improve suspend/resume support. Make sure controller is idle on suspend
and reset it on resume.
2010-05-21 13:29:28 +00:00
Alexander Motin
205367f9bc Enable PCI busmastering explicitly to be sure. 2010-05-02 14:46:05 +00:00
Alexander Motin
da6808c111 Make SATA XPT negotiate and enable some additional SATA features, such as:
- device initiated power management (some devices support only this way);
 - Automatic Partial to Slumber Transition (more power saving);
 - DMA auto-activation (expected to slightly improve performance).
More features could be added later, when hardware supports.
2010-05-02 12:07:47 +00:00
Alexander Motin
89f2835fc9 Add Target/LUN ID checks and deny access to targets 1-14 when PMP absent.
Enforce PMA bit clearing when PMP detached to avoid further scan timeouts.
2010-04-30 08:02:12 +00:00
Rui Paulo
0ff2943ecb Revert r206755. It causes some laptops to stop booting. 2010-04-19 14:07:33 +00:00
Rui Paulo
25eb6a7d87 Add another ICH7M chipset that works.
MFC after:	1 week
2010-04-17 11:40:39 +00:00
Alexander Motin
e67afc40da - Spec tells that CCC interrupt is edge triggered. Acknowledge it as such.
- Do not try to enable CCC if it is not supported.
2010-03-21 18:18:58 +00:00
Alexander Motin
b41cd53957 MFp4:
With FBS enabled, we have no idea what command caused timeout.
Implement same logic as in siis(4) - wait for other commands
complete or timeout and then give some more time.
2010-02-14 12:30:35 +00:00
Alexander Motin
4c9d5e6b0f Disable PHY of unconnected ports when interface power management enabled.
It allows to save a bit more power (about 0.5W on 2 unused ports of ICH8M).
2010-02-03 12:00:57 +00:00
Alexander Motin
4cca153030 - Give ATA/SATA SIMs info about ATAPI packet size, supported by device.
- Make ATA XPT to reject longer SCSI CDBs then supported by device, or
any SCSI CDBs, if device doesn't support ATAPI.
2010-02-02 11:09:28 +00:00
Alexander Motin
ed70cffd35 Reset port on disconnect event, to abort any running requests. 2010-01-29 12:47:04 +00:00
Alexander Motin
0e6eb06168 Add FIS-based switching support. If controller supports FBS, it allows
several devices beyond Port Multiplier to work simultaneously, substantially
increasing performance.
2010-01-28 17:54:47 +00:00
Alexander Motin
83c5d981ac MFp4: Large set of CAM inprovements.
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
Alexander Motin
6268666c1b Add support for SATA part of Marvell 88SE912x controllers to ahci(4).
Limit early revisions from 6Gb/s to 3Gb/s by default, or they negotiate
only 1.5Gbps, when 3Gb/s devices connected.

Add dummy driver for PATA part of these controllers, preventing generic
driver attach them. It causes system freeze when SATA controller used after
PATA was touched.
2010-01-26 15:25:24 +00:00
Alexander Motin
f343c07f96 While AHCI specification tells that multi-vector MSI doesn't use global IS
register, nVidia chipsets have different oppinion, requiring every interrupt
to be acknowledged there.

While there, add interrupt descriptions in multi-vector MSI mode.
2010-01-10 16:05:05 +00:00
Alexander Motin
f45946a8f7 Avoid false positive probe on ICH6 chipsets. 2009-12-25 07:59:31 +00:00
Alexander Motin
45e1aff18a Clear all ports interrupt status bits in single write. Clearing one by one
causes additional MSIs messages sent if several ports asked for attention
same time. Time window before clearing is not important, as these interrupts
are level triggered by interrupt source.
2009-12-21 21:27:56 +00:00
Alexander Motin
a48eed8352 Add Asynchronous Notification support for controllers without SNTF
capability by snooping SDB FIS receive area. It should be even faster
then regular way, but less reliable.
2009-12-06 23:56:54 +00:00
Alexander Motin
b447e682d6 MFp4:
Improve ATA mode/SATA revision control.
2009-11-26 08:49:46 +00:00
Alexander Motin
c8039fc667 MFp4:
- Extend XPT-SIM transfer settings control API. Now it allows to report to
SATA SIM number of tags supported by each device, implement ATA mode and
SATA revision negotiation for both SATA and PATA SIMs.
- Make ahci(4) and siis(4) to use submitted maximum tag number, when
scheduling requests. It allows to support NCQ on devices with lower tags
count then controller supports.
- Make PMP driver to report attached devices connection speeds.
- Implement ATA mode negotiation between user settings, device and
controller capabilities.
2009-11-24 12:47:58 +00:00
Alexander Motin
9ece9ab1eb Do not attach JMicrons with single PCI function. They are not working as
AHCI for some reason, even when declaring so. Let atajmicron configure
them for us and provide PATA support.
2009-11-23 18:07:28 +00:00
Alexander Motin
6bd8779bb9 Change the way in which AHCI+PATA combined controllers, such as JMicron
and Marvell handled. Instead of trying to attach two different drivers to
single device, wrapping each call, make one of them (atajmicron, atamarvell)
attach do device solely, but create child device for AHCI driver,
passing it all required resources. It is quite easy, as none of
resources are shared, except IRQ.

As result, it:
- makes drivers operation more independent and straitforward,
- allows to use new ahci(4) driver with such devices, adding support for
new features, such as PMP and NCQ, same time keeping legacy PATA support,
- will allow to just drop old ataahci driver, when it's time come.
2009-11-16 15:38:27 +00:00
Alexander Motin
49b96d25da MFp4:
Check SNCQ HBA capability bit when reporting NCQ support to CAM.
2009-11-14 20:06:04 +00:00
Alexander Motin
30a4094f86 MFp4:
- Move tagged queueing control from ADA to ATA XPT. It allows to control
  device command queue length correctly. First step to support < 32 tags.
- Limit queue for non-tagged devices by 2 slots for ahci(4) and siis(4).
- Implement quirk matching for ATA devices.
- Move xpt_schedule_dev_sendq() from header to source file.
- Move delayed queue shrinking to the more expected place - element freeing.
- Remove some SCSIsms in ATA.
2009-11-11 11:10:36 +00:00
Alexander Motin
8e57bf8357 MFp4:
Add set of chip IDs, known to support AHCI.
2009-11-11 10:44:09 +00:00
Alexander Motin
a69552e4b6 MFp4:
- Handle timeouts and fatal errors with port hard-reset. The rest of
recovery will be done by XPT on receiving async event. More gracefull
per-device soft-reset recovery can be implemented later.
- Add workaround for ATI SB600/SB700 PMP probe related bug, to speedup boot.
2009-11-03 11:47:07 +00:00
Alexander Motin
c269e21049 Revert interrupt reason check order back.
ATAPI errors may set IF bit together with TFE.
2009-10-23 13:07:22 +00:00
Alexander Motin
8e7cccb3bd MFp4:
Report real max_target = 15. SIM doesn't need to know that target 15 is PMP.
It is XPT business.
2009-10-21 13:00:01 +00:00
Alexander Motin
a1aa38dedf MFp4:
On error, freeze device queue, to allow periph driver to do proper recovery.
Freeze SIM queue only in some cases, when it is needed to protect SIM.

Implement better command timeout detection logic for non-queued commands.
This fixes false positives when command with short timeout waiting for the
long one. For example, when hald tastes CD during burning process.

Read and clear SERR register on interrupt.
2009-10-21 12:42:25 +00:00
Alexander Motin
660d482a4e On command timeout handle frozen command first, to not run it inside
XXX_end_transaction().

Submitted by:	avg
2009-10-07 15:40:04 +00:00
Alexander Motin
aed39f0d65 To save small bit of CPU time, hide part of SNTF register read latency
behind other reads.
2009-09-06 21:22:24 +00:00
Alexander Motin
ce531e6b83 Round maxio for ATI SB600 to 64K.
Submitted by:	scottl@
2009-09-03 19:02:17 +00:00
Alexander Motin
19dbe46d28 ATI SB600 can't handle 256 sectors transfers with FPDMA (NCQ).
MFC after:	3 days
2009-09-03 12:37:17 +00:00
Alexander Motin
4e931d3116 Fix build with INVARIANTS. 2009-08-30 19:40:09 +00:00
Alexander Motin
4dbabf1049 MFp4:
- Add Command Completion Coalescing support.
 - Add SNTF support.
 - Add two more power management modes (4, 5), implemented on driver level.
 - Fix interface mode setting.
 - Reduce interface reset time.
 - Do not report meaningless protocol/transport versions.
 - Report CAP2 register content.
 - Some performance optimizations.
2009-08-30 15:20:13 +00:00
Scott Long
52c9ce25d8 Separate the parallel scsi knowledge out of the core of the XPT, and
modularize it so that new transports can be created.

Add a transport for SATA

Add a periph+protocol layer for ATA

Add a driver for AHCI-compliant hardware.

Add a maxio field to CAM so that drivers can advertise their max
I/O capability.  Modify various drivers so that they are insulated
from the value of MAXPHYS.

The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel.  The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives.  It also supports port multipliers.

ATA drives are accessed via 'ada' device nodes.  ATAPI drives are
accessed via 'cd' device nodes.  They can all be enumerated and manipulated
via camcontrol, just like SCSI drives.  SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol.  See the camcontrol manpage for further
details.  Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.

This code is very experimental at the moment.  The userland ABI/API has
changed, so applications will need to be recompiled.  It may change
further in the near future.  The 'ada' device name may also change as
more infrastructure is completed in this project.  The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.

Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed.  In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.

The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols.  It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware.  While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged.  Help with new transports is also encouraged.

Submitted by:	scottl, mav
Approved by:	re
2009-07-10 08:18:08 +00:00