In theory this allows to avoid one more expensive doorbell register read
later in some scenarios. But in practice it also significantly increases
packet rate on PLX hardware, that I can't explain yet, possibly work-
arounding some interrupt delays.
MFC after: 13 days
Sponsored by: iXsystems, Inc.
compatible string to check if the board is compatible with a given quirk.
It's possible this will be moved later, however as it's currently only used
by the MP code put it there.
So far the only instance of a quirk is when the list of CPUs may be
incorrect. This can happen on virtual machines with a hard coded
devicetree, but where the user may then set the number of CPUs as an
argument. This is the case on the ARM models so include the model specific
compat strings for these, including the spelling mistake found in some of
the OpenplatformPkg dtb files.
Sponsored by: DARPA, AFRL
used by the TOE hardware for fully offloaded connections. The knob
affects new connections only.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Record the file path for boot1.efi as the UEFI environemnt variable
FreeBSDBootVarGUID:Boot1Path. Record the device this came from as
FreeBSDBootVarGUID:Boot1Dev. While later stages of the boot may be
able to guess these values by retrieving UEFIGlobal:BootCurrent and
groveling through the correct UEFIGlobal:BootXXXX, this provides
certanty in the face of behavior from any part of the boot loader
chain that might "guess" what to do next. These env variables are
volatile and will disappear on reboot.
Sponsored by: Netflix
In the FreeBSD UEFI boot protocol, boot1.efi exits back to UEFI if it
can't boot the image for most reasons (so that further items in the
EFI boot manger list can be tried). Rename panic to efi_panic, make it
static and give it an extra status argument. Exit back to UEFI with
that status argument so the next loader can be tried.
Use malloc/free exclusively instead of mixing malloc/free and
AllocatePool/FreePool. The code is smaller.
Sponsored by: Netflix
Print the device that boot1.efi was loaded from. Print the path as
well (since it isn't included in DeviceHandle). Move block where we do
this earlier so all the block handle code is now together.
Sponsored by: Netflix
Make efichar.c routines available to libefi as well as
libefivar. Define LIBEFI when building so we can conditionally include
stand.h vs the normal userland stuff.
If both nvme and cam are compiled as modules, nvme cannot be kldloaded
otherwise.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The default value for arc_no_grow_shift may not be optimal when using
several GiB ARC. Expose it via sysctl allows users to tune it easily.
Also expose arc_grow_retry via sysctl for the same reason. The default value of
60s might, in case of intensive load, be too long.
Submitted by: Nikita Kozlov <nikita.kozlov@blade-group.com>
Reviewed by: mav, manu, bapt
MFC after: 2 weeks
Sponsored by: blade
Differential Revision: https://reviews.freebsd.org/D12144
It allows application driver get initial link state without racing with
hardware interrupts, thanks to the context rmlock held here.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Those events may be reported as soon as callback is registered, if the link
is enabled by hardware or some other application.
While there, clean link_is_up variable on link down event.
MFC after: 1 week
install after full initialization, and another to disable the TCB
cache (T6+). The latter works as a tunable only.
Note that debug_flags are for debugging only and should not be set
normally.
MFC after: 1 week
Sponsored by: Chelsio Communications
This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though
the second with predictable complications on hot-plug and reboot events).
I tested it with PEX 8717 and PEX 8733 chips, but expect it should work
with many other compatible ones too. It supports up to two NT bridges
per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows,
6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines
in those chips, but they are not yet supported.
While there, rename Intel NTB driver from generic ntb_hw(4) to more specific
ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and
alike to Linux naming.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
In particular, MIPS now has COMPAT_FREEBSD32 for n64 kernels so this
cannot be ignored for n64. On the other hand, it is unneeded for o32
MIPS kernels as the issue is only present when using 64-bit registers,
so remove the workaround from o32 kernels.
Reviewed by: jmallett
Sponsored by: DARPA / AFRL
While I am here, declare struct md_ioctl32 as packed which allows
us to stop playing tricks with sizeof(md_ioctl32)+y as well as
simplifies md_pad handling. Both were necessary because of different
alignment preferences on amd64 vs i386.
MFC after: 4 weeks
The function return value is not used. Its argument is always
swap_total/PAGE_SIZE, so make it not take any arguments.
Submitted by: ota@j.email.ne.jp
PR: 221356
MFC after: 1 week
Now that all of the packaged software has been adjusted to either use
Flower (https://github.com/NuxiNL/flower) for making incoming/outgoing
network connections or can have connections injected, there is no longer
need to keep accept() around. It is now a lot easier to write networked
services that are address family independent, dual-stack, testable, etc.
Remove all of the bits related to accept(), but also to
getsockopt(SO_ACCEPTCONN).
Post-cold sleep instead of DELAY when waiting for firmware.
Convert softc mutex to an SX lock. Change all waits to sleeps
once interrupts are enabled (and it is safe to sleep).
Submitted by: Matt Macy <matt@mattmacy.io>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12101
These firmwares come from a pre-release snapshot. The final firmwares
in this Chelsio release cycle will likely be .61.0 or later and those
will be the next "long lived" firmwares in FreeBSD head and stable
branches. .59 is being provided in head (only) for wider test exposure.
Obtained from: Chelsio Communications
Sponsored by: Chelsio Communications
illumos 4185 ("add new cryptographic checksums to ZFS: SHA-512,
Skein, Edon-R") was intentionally merged only partially in r289422,
without adding support for skein, sha512 and edonr on FreeBSD.
Support for skein and sha512 was added later on, but edonr is still not
implemented in FreeBSD.
Prior to this commit zfs(8) correctly rejected edonr, but with an error
message that claimed support:
fk@r500 ~ $zfs set checksum=edonr tank
cannot set property for 'tank': 'checksum' must be one of 'on | off | fletcher2 | fletcher4 | sha256 | sha512 | skein | edonr'
PR: 204055
Submitted by: Fabian Keil
Approved by: allanjude
Obtained from: ElectroBSD
MFC after: 1 week
This patch changes the way XPT_GDEV_TYPE works for NVMe. The current
ccb_getdev structure includes pointers to the NVMe Identify Controller
and Namespace structures, but these are kernel virtual addresses which
are not accessible from user space.
As an alternative, the patch changes the pointers into padding in
ccb_getdev and adds two new types to ccb_dev_advinfo to retrieve the
Identify Controller (CDAI_TYPE_NVME_CNTRL) and Namespace
(CDAI_TYPE_NVME_NS) data structures.
Reviewed By: rpokala, imp
Differential Revision: https://reviews.freebsd.org/D10466
Submitted by: Chuck Tuffli
Tuffli had submitted a more thorough patch that I was unaware of when
I did my work and this brings in the bits I missed from that patch.
PR: 220267
Submitted by: Chuck Tuffli
This adds support in pass(4) for data to be described with a
scatter-gather list (sglist) to augment the existing (single) virtual
address.
Differential Revision: https://reviews.freebsd.org/D11361
Submitted by: Chuck Tuffli
Reviewed by: imp@, scottl@, kenm@
Provided a better estimate for the number of transactions that can be
pending at one time. This will be number of queues * number of
trackers / 4, as suggested by Jim Harris. This gives a better estimate
of the number of transactions that CAM should queue before applying
back pressure. This should be revisted when we have real multi-queue
support in CAM and the upper layers of the I/O stack.
Sponsored by: Netflix
creating hardware VIs.
This fixes a bad race on systems with hw.cxgbe.num_vis > 1.
Reported by: olivier@
MFC after: 1 week
Sponsored by: Chelsio Communications
The actual cache line size has always been 64 bytes.
The 128 number arose as an optimization for Core 2 era Intel processors. By
default (configurable in BIOS), these CPUs would prefetch adjacent cache
lines unintelligently. Newer CPUs prefetch more intelligently.
The latest Core 2 era CPU was introduced in September 2008 (Xeon 7400
series, "Dunnington"). If you are still using one of these CPUs, especially
in a multi-socket configuration, consider locating the "adjacent cache line
prefetch" option in BIOS and disabling it.
Reported by: mjg
Reviewed by: np
Discussed with: jhb
Sponsored by: Dell EMC Isilon
Before r207410, the hold count of a page in a page queue was protected
by the queue lock, and, before laundering a page, the page daemon
removed managed writeable mappings of the page before releasing the
queue lock. This ensured that other threads could not concurrently
create transient writeable mappings using pmap_extract_and_hold() on a
user map, as is done for example by vmapbuf(). With that revision,
however, a race can allow the creation of such a mapping, meaning that
the page might be modified as it is being laundered, potentially
resulting in it being marked clean when its contents do not match
those given to the pager. Close the race by using the page lock to
synchronize the hold count check in vm_pageout_cluster() with the
removal of writeable managed mappings.
Reported by: alc
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12084
according to the enabled interface capability bits. Also remove
some dead code, which tried to preserve already set contents of
E1000_WUC while that register is completely overwritten shortly
after in all cases.
FAT specification requires that for valid FAT, FAT cluster 0 has a
specific value derived from the BPB media descriptor. The lowest
(little-endian) byte must be equal to bpb.bpbMedia, other bits in the
cluster number must be all 1's. Implement the check to reduce the
chance of the randomly corrupted FAT to pass the mount attempt.
Submitted by: Siva Mahadevan <smahadevan@freebsdfoundation.org>
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12124
