According to POSIX, the netdb.h header must also provide in_addr_t and
in_port_t. It should also provide IPPORT_RESERVED. Copy over the
necessary bits from <netinet/in.h> to achieve that.
POSIX requires that <dirent.h> provides ino_t in the XSI case. In our
case, this wasn't being exposed, as d_ino is a macro that expands to
d_fileno that is an uint32_t, not an ino_t.
Using a cookie with meta mode causes it to *not rerun* (as normal make
does) unless the command changes or filemon-detected files change.
After all of the work done here it turns out that skipping installation
is dangerous since the install commands use <dir>/*.h. The actual build
command is not changing but the files installed are changing by the mere
act of adding a new header into the source tree. Thus we cannot safely
use meta mode logic here. It must always rerun and install the headers.
The install -C flag at least prevents churning timestamps when
installing a header that was already present.
Sponsored by: EMC / Isilon Storage Division
intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013.
A robust mutex is guaranteed to be cleared by the system upon either
thread or process owner termination while the mutex is held. The next
mutex locker is then notified about inconsistent mutex state and can
execute (or abandon) corrective actions.
The patch mostly consists of small changes here and there, adding
neccessary checks for the inconsistent and abandoned conditions into
existing paths. Additionally, the thread exit handler was extended to
iterate over the userspace-maintained list of owned robust mutexes,
unlocking and marking as terminated each of them.
The list of owned robust mutexes cannot be maintained atomically
synchronous with the mutex lock state (it is possible in kernel, but
is too expensive). Instead, for the duration of lock or unlock
operation, the current mutex is remembered in a special slot that is
also checked by the kernel at thread termination.
Kernel must be aware about the per-thread location of the heads of
robust mutex lists and the current active mutex slot. When a thread
touches a robust mutex for the first time, a new umtx op syscall is
issued which informs about location of lists heads.
The umtx sleep queues for PP and PI mutexes are split between
non-robust and robust.
Somewhat unrelated changes in the patch:
1. Style.
2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared
pi mutexes.
3. Removal of the userspace struct pthread_mutex m_owner field.
4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls
the lifetime of the shared mutex associated with a vnode' page.
Reviewed by: jilles (previous version, supposedly the objection was fixed)
Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects)
Tested by: pho
Sponsored by: The FreeBSD Foundation
I'm still not sure why only Pypy runs into the error with the function
typedefs. Fix it anyway.
Use __ssize_t instead of ssize_t for the types; it's possible for the size_t
type to not be visible if at the wrong POSIX_VISIBLE level.
A final (crossing my fingers) follow-up to r299456.
Sponsored by: EMC / Isilon Storage Division
Despite the private namespace, several broken ports depend on the __off64_t
name for the type. Export it exactly the same way off_t and __off_t are
exported.
A follow-up to r299456.
Suggested by: php56
Sponsored by: EMC / Isilon Storage Division
Two new functions are provided, bit_ffs_at() and bit_ffc_at(), which allow
for efficient searching of set or cleared bits starting from any bit offset
within the bit string.
Performance is improved by operating on longs instead of bytes and using
ffsl() for searches within a long. ffsl() is a compiler builtin in both
clang and gcc for most architectures, converting what was a brute force
while loop search into a couple of instructions.
All of the bitstring(3) API continues to be contained in the header file.
Some of the functions are large enough that perhaps they should be uninlined
and moved to a library, but that is beyond the scope of this commit.
sys/sys/bitstring.h:
Convert the majority of the existing bit string implementation from
macros to inline functions.
Properly protect the implementation from inadvertant macro expansion
when included in a user's program by prefixing all private
macros/functions and local variables with '_'.
Add bit_ffs_at() and bit_ffc_at(). Implement bit_ffs() and
bit_ffc() in terms of their "at" counterparts.
Provide a kernel implementation of bit_alloc(), making the full API
usable in the kernel.
Improve code documenation.
share/man/man3/bitstring.3:
Add pre-exisiting API bit_ffc() to the synopsis.
Document new APIs.
Document the initialization state of the bit strings
allocated/declared by bit_alloc() and bit_decl().
Correct documentation for bitstr_size(). The original code comments
indicate the size is in bytes, not "elements of bitstr_t". The new
implementation follows this lead. Only hastd assumed "elements"
rather than bytes and it has been corrected.
etc/mtree/BSD.tests.dist:
tests/sys/Makefile:
tests/sys/sys/Makefile:
tests/sys/sys/bitstring.c:
Add tests for all existing and new functionality.
include/bitstring.h
Include all headers needed by sys/bitstring.h
lib/libbluetooth/bluetooth.h:
usr.sbin/bluetooth/hccontrol/le.c:
Include bitstring.h instead of sys/bitstring.h.
sbin/hastd/activemap.c:
Correct usage of bitstr_size().
sys/dev/xen/blkback/blkback.c
Use new bit_alloc.
sys/kern/subr_unit.c:
Remove hard-coded assumption that sizeof(bitstr_t) is 1. Get rid of
unrb.busy, which caches the number of bits set in unrb.map. When
INVARIANTS are disabled, nothing needs to know that information.
callapse_unr can be adapted to use bit_ffs and bit_ffc instead.
Eliminating unrb.busy saves memory, simplifies the code, and
provides a slight speedup when INVARIANTS are disabled.
sys/net/flowtable.c:
Use the new kernel implementation of bit-alloc, instead of hacking
the old libc-dependent macro.
sys/sys/param.h
Update __FreeBSD_version to indicate availability of new API
Submitted by: gibbs, asomers
Reviewed by: gibbs, ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6004
This will only be done if the target is defined, so if the target is
defined after bsd.sys.mk is included then it needs to manually add
${META_DEPS} still.
Sponsored by: EMC / Isilon Storage Division
etc) in stdlib.h. These will be needed for newer versions of libc++,
which uses them for defining overloaded versions of abs() and div().
MFC after: 1 week
Extend it to other cases of meta mode cookies so they get the proper rm
cookie behavior when a .meta file detects it needs to rebuild and fails.
Sponsored by: EMC / Isilon Storage Division
This file is using stage-install, so all of the .dirdep files
are properly handled. The cookie handling also properly
handles rebuilds with .meta files. DESTDIR from bsd.sys.mk is also
respected for staging. This logic came in r239572.
Sponsored by: EMC / Isilon Storage Division
The meta file may decide the target is out of date but nothing
ensures that the *next* build will build this target if it
fails this time for some reason; it is still out-of-date
until it succeeds.
Convert the include/ cookie usage to the global versions.
Sponsored by: EMC / Isilon Storage Division
The defines for xdr_rpc* in xdr.h are wrong. It could be
very well that Solaris did strip the '_t' from xdr_u_int32_t,
but Solaris has a xdr_u_int32 function, we don't have this.
So all of this defines will lead to an unresolved symbol.
This explains why we do not use these functions in FreeBSD
while they are used in Illumos/Solaris.
Obtained from: linux libtirpc (git 7864122e61ffe4db1aa8ace89117358a1e3a391b)
MFC after: 3 weeks
SunRPC is using xp_sock in SVCXPRT, while TI-RPC is using
xp_fd. Add a compatibility define.
Illumos has something similar for the non-kernel case.
Obtained from: linux-nfs project (git 0d94036c3a0d4c24d22bf6a8c40ac6625d972c29)
Add missing Symbol.map entry for __aligned_alloc.
Add weak-->strong symbol binding for
{malloc_stats_print,mallctl,mallctlnametomib,mallctlbymib} -->
{__malloc_stats_print,__mallctl,__mallctlnametomib,__mallctlbymib}. These
bindings complete the set necessary to allow applications to replace all
malloc-related symbols.
breaking the ABI. Special value is stored in the lock pointer to
indicate shared lock, and offline page in the shared memory is
allocated to store the actual lock.
Reviewed by: vangyzen (previous version)
Discussed with: deischen, emaste, jhb, rwatson,
Martin Simmons <martin@lispworks.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
enabled in the compilation environment, i.e. for ANSI C use of
#include <signal.h>.
Requested and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
ucontext_t available. Our code even has XXX comment about this.
Add a bit of compliance by moving struct __ucontext definition into
sys/_ucontext.h and including it into signal.h and sys/ucontext.h.
Several machine/ucontext.h headers were changed to use namespace-safe
types (like uint64_t->__uint64_t) to not depend on sys/types.h.
struct __stack_t from sys/signal.h is made always visible in private
namespace to satisfy sys/_ucontext.h requirements.
Apparently mips _types.h pollutes global namespace with f_register_t
type definition. This commit does not try to fix the issue.
PR: 207079
Reported and tested by: Ting-Wei Lan <lantw44@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
control algorithm options. The argument is variable length and is opaque
to TCP, forwarded directly to the algorithm's ctl_output method.
Provide new includes directory netinet/cc, where algorithm specific
headers can be installed.
The new API doesn't yet have any in tree consumers.
The original code written by lstewart.
Reviewed by: rrs, emax
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D711
- Avoid namespace pollution and move definitions of _POSIX2_CHARCLASS_NAME_MAX
and _POSIX2_COLL_WEIGHTS_MAX into the .2001 section.
With input from bde.
Submitted by bde
Set _PATH_DEFPATH to
/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin. This is the
path in the default class in the default /etc/login.conf,
excluding ~/bin which would not be expanded properly in a string
constant.
For normal logins, _PATH_DEFPATH is overridden by /etc/login.conf,
~/.login_conf or shell startup files. _PATH_DEFPATH is still used as a
default by execlp(), execvp(), posix_spawnp() and sh if PATH is not set, and
by cron. Especially the latter is a common trap (most recently in PR
204813).
PR: 204813
Reviewed by: secteam (delphij), alfred
Traditionally the hcreate() function creates a hash table that uses
chaining, using a fixed user-provided size. The problem with this
approach is that this often either wastes memory (table too big) or
yields bad performance (table too small). For applications it may not
always be easy to estimate the right hash table size. A fixed number
only increases performance compared to a linked list by a constant
factor.
This problem can be solved easily by dynamically resizing the hash
table. If the size of the hash table is at least doubled, this has no
negative on the running time complexity. If a dynamically sized hash
table is used, we can also switch to using open addressing instead of
chaining, which has the advantage of just using a single allocation for
the entire table, instead of allocating many small objects.
Finally, a problem with the existing implementation is that its
deterministic algorithm for hashing makes it possible to come up with
fixed patterns to trigger an excessive number of collisions. We can
easily solve this by using FNV-1a as a hashing algorithm in combination
with a randomly generated offset basis.
Measurements have shown that this implementation is about 20-25% faster
than the existing implementation (even if the existing implementation is
given an excessive number of buckets). Though it allocates more memory
through malloc() than the old implementation (between 4-8 pointers per
used entry instead of 3), process memory use is similar to the old
implementation as if the estimated size was underestimated by a factor
10. This is due to the fact that malloc() needs to perform less
bookkeeping.
Reviewed by: jilles, pfg
Obtained from: https://github.com/NuxiNL/cloudlibc
Differential Revision: https://reviews.freebsd.org/D4644
The existing implementations of POSIX tsearch() and tdelete() don't
attempt to perform any balancing at all. Testing reveals that inserting
100k nodes into a tree sequentially takes approximately one minute on my
system.
Though most other BSDs also don't use any balanced tree internally, C
libraries like glibc and musl do provide better implementations. glibc
uses a red-black tree and musl uses an AVL tree.
Red-black trees have the advantage over AVL trees that they only require
O(1) rotations after insertion and deletion, but have the disadvantage
that the tree has a maximum depth of 2*log2(n) instead of 1.44*log2(n).
My take is that it's better to focus on having a lower maximum depth,
for the reason that in the case of tsearch() the invocation of the
comparator likely dominates the running time.
This change replaces the tsearch() and tdelete() functions by versions
that create an AVL tree. Compared to musl's implementation, this version
is different in two different ways:
- We don't keep track of heights; just balances. This is sufficient.
This has the advantage that it reduces the number of nodes that are
being accessed. Storing heights requires us to also access all of the
siblings along the path.
- Don't use any recursion at all. We know that the tree cannot 2^64
elements in size, so the height of the tree can never be larger than
96. Use a 128-bit bitmask to keep track of the path that is computed.
This allows us to iterate over the same path twice, meaning we can
apply rotations from top to bottom.
Inserting 100k nodes into a tree now only takes 0.015 seconds. Insertion
seems to be twice as fast as glibc, whereas deletion has about the same
performance. Unlike glibc, it uses a fixed amount of memory.
I also experimented with both recursive and iterative bottom-up
implementations of the same algorithm. This iterative top-down version
performs similar to the recursive bottom-up version in terms of speed
and code size.
For some reason, the iterative bottom-up algorithm was actually 30%
faster for deletion, but has a quadratic memory complexity to keep track
of all the parent pointers.
Reviewed by: jilles
Obtained from: https://github.com/NuxiNL/cloudlibc
Differential Revision: https://reviews.freebsd.org/D4412
In r289315, I added new fields to res_state. This broke binary
backward compatibility. It also broke some ports (and possibly
other code) by requiring the definition of time_t and struct timespec.
Fix these problems by moving the new fields into __res_state_ext.
Suggested by: ume
Reviewed by: ume
MFC after: 3 days
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D4472
r289315 required time_t and struct timespec to be defined before
including <resolv.h>. This broke the build of net-mgmt/sx, at least.
Include <sys/timespec.h> in resolv.h to fix this with minimal pollution.
Reported by: Raphael Kubo da Costa <rakuco>
MFC after: 3 days
Sponsored by: Dell Inc.
This avoids the need for an afterinstall: hook and a check for LIBRARIES_ONLY.
It also now respects INCLUDEDIR.
This came in r249484.
Sponsored by: EMC / Isilon Storage Division
Because of how osreldate.h was being built with newvers.sh, which always
spat out a vers.c dependent on SVN or git, the meta mode build was
considering osreldate.h to depend on the current git or SVN index. This
would lead to entire tree rebuilds when modifying git's index. There's
no reason to be generating vers.c here so just skip it.
While here, in mk-osreldate.sh rename PARAM_H to proper PARAMFILE (which
newvers.sh already has a default for) and remove unneeded export.
Sponsored by: EMC / Isilon Storage Division
The _SKIP_BUILD is used while computing DIRDEPS. If MACHINE=host is passed in
then this logic was replacing 'MACHINE' with a literal value of the host arch,
which then caused the dirdeps graph to be wrong since it no longer had the
literal 'host' for any of include's dependencies.
This is a NOP currently since include/ is not usually built with MACHINE=host.
Sponsored by: EMC / Isilon Storage Division
This allows META_FILES option to be renamed META_MODE.
Also add META_COOKIE_TOUCH for use in targets that can benefit
from a cookie when in meta mode.
Differential Revision: https://reviews.freebsd.org/D4153
Reviewed by: bdrewery
On each resolver query, use stat(2) to see if the modification time
of /etc/resolv.conf has changed. If so, reload the file and reinitialize
the resolver library. However, only call stat(2) if at least two seconds
have passed since the last call to stat(2), since calling it on every
query could kill performance.
This new behavior is enabled by default. Add a "reload-period" option
to disable it or change the period of the test.
Document this behavior and option in resolv.conf(5).
Polish the man page just enough to appease igor.
https://lists.freebsd.org/pipermail/freebsd-arch/2015-October/017342.html
Reviewed by: kp, wblock
Discussed with: jilles, imp, alfred
MFC after: 1 month
Relnotes: yes
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D3867
FreeBSD extended ctypes to include numbers (e.g. isnumber()) but never
actually implemented it. The isnumber() function was equivalent to the
isdigit() function in every case.
Now that DragonFly's ctype source files have number definitions, the
number ctype can finally be implemented. It's given a new flag _CTYPE_N.
The isalnum() and iswalnum() functions have been changed to use this
flag rather than the _CTYPE_D digit flag.
While isalnum(), isnumber(), and their wide equivalents now return
different values in locale cases, the ishexnumber() and iswhexnumber()
functions are unchanged. They are still aliases for isxdigit() and
iswxdigit().
Also change ctype.h for isdigit and isxdigit to use sbistype like the
other functions.
Obtained from: dragonfly
If the command to be ran changes then a rebuild is caused. Checking
exists(${DESTDIR}...) from make results in this on the 2nd and
possibly subsequent builds due to staging during build. Avoid this
by always running the existence check in the make sh command.
Sponsored by: EMC / Isilon Storage Division
- Use _Bool rather than bool to resolve missing type errors in malloc_np.h.
- Fix malloc manual page #include documentation.
- Add *allocm manual pages to obsolete files.
Submitted by: jbeich
Start using the gcc sentinel attribute, which can be used to
mark varargs function that need a NULL pointer to mark argument
termination, like execl(3).
Relnotes: yes
This function is equivalent to fclose(3) function except that it
does not close the underlying file descriptor.
fdclose(3) is step forward to make FILE structure private.
Reviewed by: wblock, jilles, jhb, pjd
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D2697
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
This lets the compiler know about the alignment of pointers returned
by aligned_alloc(3), posix_memalign(3). and contigmalloc(9)
Currently this is only supported in recent gcc but we are ready to
use it if clang implements it.
Relnotes: yes
Add a manpage for it, assign the copyright to the OpenBSD project on it since it
is mostly copy/paste from OpenBSD manpage.
style(9) fixes
Differential Revision: https://reviews.freebsd.org/D2420
Reviewed by: kib
discontinued by its initial authors. In FreeBSD the code was already
slightly edited during the pf(4) SMP project. It is about to be edited
more in the projects/ifnet. Moving out of contrib also allows to remove
several hacks to the make glue.
Reviewed by: net@
The `nonnull' attribute specifies that some function parameters should be
non-null pointers. This is very useful as it helps the compiler generate
warnings on suspicious code and can also enable some small optimizations.
Also start using 'alloc_size' attribute in the allocator functions.
This is an initial step to better integrate our libc with the compiler:
these attributes are fully supported by clang and they are also useful
for the static analyzer.
Note that due to some bogus internal procedure in the way gcc ports
are built they may require updating if they were built before r280801.
Relnotes: yes
Hinted by: Android's bionic libc
Differential Revision: https://reviews.freebsd.org/D2107
GCC is still carries an old version of cdefs.h which doesn't
accept multiple parameters for the nonnull attribute.
Since this issue probably affects many ports in the tree
we will revert it for now until gcc gets fixed.
The `nonnull' attribute specifies that some function parameters should be
non-null pointers. This is very useful as it helps the compiler generate
warnings on suspicious code and can also enable some small optimizations.
In clang this is also useful for the static analyzer.
While we could go on defining this all over the tree, it only
makes sense to annotate a subset of critical functions.
Hinted by: Android's bionic libc
Differential Revision: https://reviews.freebsd.org/D2101
- bootparamd
- bootpd
- finger/fingerd
- ftp/ftpd
- hastctl/hastd
- iscsid, et al
- rbootd
- talk/talkd
- tcpd, et al
- tftp/tftpd
Add src.conf entries for the various components and do a best effort
at adding components to tools/build/mk/OptionalObsoleteFiles.inc
in a separate word from the _count. This does not permit both items to
be updated atomically in a portable manner. As a result, sem_post()
must always perform a system call to safely clear _has_waiters.
This change removes the _has_waiters field and instead uses the high bit
of _count as the _has_waiters flag. A new umtx object type (_usem2) and
two new umtx operations are added (SEM_WAIT2 and SEM_WAKE2) to implement
these semantics. The older operations are still supported under the
COMPAT_FREEBSD9/10 options. The POSIX semaphore API in libc has
been updated to use the new implementation. Note that the new
implementation is not compatible with the previous implementation.
However, this only affects static binaries (which cannot be helped by
symbol versioning). Binaries using a dynamic libc will continue to work
fine. SEM_MAGIC has been bumped so that mismatched binaries will error
rather than corrupting a shared semaphore. In addition, a padding field
has been added to sem_t so that it remains the same size.
Differential Revision: https://reviews.freebsd.org/D961
Reported by: adrian
Reviewed by: kib, jilles (earlier version)
Sponsored by: Norse
In some cases, TSC is broken and special applications might benefit
from memory mapping HPET and reading the registers to count time.
Most often the main HPET counter is 32-bit only[1], so this only gives
the application a 300 second window based on the default HPET
interval.
Other applications, such as Intel's DPDK, expect /dev/hpet to be
present and use it to count time as well.
Although we have an almost userland version of gettimeofday() which
uses rdtsc in userland, it's not always possible to use it, depending
on how broken the multi-socket hardware is.
Install the acpi_hpet.h so that applications can use the HPET register
definitions.
[1] I haven't found a system where HPET's main counter uses more than
32 bit. There seems to be a discrepancy in the Intel documentation
(claiming it's a 64-bit counter) and the actual implementation (a
32-bit counter in a 64-bit memory area).
MFC after: 1 week
Relnotes: yes
I've looked at the GCC sources and I now understand what's going wrong.
THe C11 keywords are simply nonexistent when using C++ mode. They are
marked as C-only in the parser. This is absolutely impractical for
multiple reasons:
- The C11 keywords do not conflict with C++ naming rules. They all start
with _[A-Z]. There is no reason to make them C-only.
- It makes it practically impossible for people to use these keywords in
C header files and expect them to work from within C++ sources.
As I said in my previous commit message: GCC is by far the weirdest
compiler that I've ever used.
As GCC also gained support for the C11 keywords over time, we can patch
up <sys/cdefs.h> to not define these anymore. This has the advantage
that error messages for static assertions are printed natively and that
_Alignas() will work with even a type outside of C11 mode.
All C11 keywords are supported with GCC 4.7 and higher, with the
exception of _Thread_local and _Generic. These are only supported as of
GCC 4.9.
bsearch_b is the Apple blocks enabled version of bsearch(3).
This was added to libc in Revision 264042 but the commit
missed the declaration required to make use of it.
While here move some other block-related functions to the
BSD_VISIBLE block as these are non-standard.
Phabric: D638
Reviewed by: theraven, wollman
This change extends all of the functions present in the <pthread.h> and
<threads.h> headers to have lock annotations. This will allow Clang to
warn about the following:
- Locking a function twice,
- Unlocking a function without a mutex being locked,
- Forgetting to unlock a mutex before returning,
- Destroying or reinitializing a mutex that is currenty locked,
- Using an unlocked mutex in combination with a condition variable.
Enabling these annotations already allowed me to catch a bug in one of
our userspace tools (r270749).
Back in 2011 obrien has added the #define macro in sys/sys/stddef.h to
guard ptrdiff_t. Add similar protection to the identical code in
include/stddef.h.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
MFC after: 1 week
From
http://www.isc.org/downloads/libbind/
The libbind functions have been separated from the BIND suite as of BIND
9.6.0. Originally from older versions of BIND, they have been continually
maintained and improved but not installed by default with BIND 9. This
standard resolver library contains the same historical functions and
headers included with many Unix operating systems. In fact, most
implementations are based on the same original code.
At present, NetBSD maintains libbind code, now known as "netresolv".
While testing this I found a conformance issue in hdestroy()
that will be fixed in a subsequent commit.
Obtained from: NetBSD (hcreate.c, CVS Rev. 1.7)
The current ordering of this header is a feature as it
is more consistent with POSIX.
Also adding gratuitous newlines is not elegant.
Pointed out by: bde
- In the unionfs case, opendir() and fdopendir() read the directory's full
contents and cache it. This cache is not refreshed when rewinddir() is
called, so rewinddir() will not notice updates to a directory. Fix this
by splitting the code to fetch a directory's contents out of
__opendir_common() into a new _filldir() function and call this from
rewinddir() when operating on a unionfs directory.
- If rewinddir() is called on a directory opened with fdopendir() before
any directory entries are fetched, rewinddir() will not adjust the seek
location of the backing file descriptor. If the file descriptor passed
to fdopendir() had a non-zero offset, the rewinddir() will not rewind to
the beginning. Fix this by always seeking back to 0 in rewinddir().
This means the dd_rewind hack can also be removed.
While here, add missing locking to rewinddir().
CR: https://phabric.freebsd.org/D312
Reviewed by: jilles
MFC after: 1 week
POSIX.1-2008 specifies that those two functions should be declared by
including <strings.h>, not <string.h> (the latter only has strcoll_l()
and strxfrm_l()):
http://pubs.opengroup.org/onlinepubs/9699919799/functions/strcasecmp.html
Obtained from: DragonFlyBSD
Reviewed by: theraven
MFC after: 2 weeks
The CUSE library is a wrapper for the devfs kernel functionality which
is exposed through /dev/cuse . In order to function the CUSE kernel
code must either be enabled in the kernel configuration file or loaded
separately as a module. Currently none of the committed items are
connected to the default builds, except for installing the needed
header files. The CUSE code will be connected to the default world and
kernel builds in a follow-up commit.
The CUSE module was written by Hans Petter Selasky, somewhat inspired
by similar functionality found in FUSE. The CUSE library can be used
for many purposes. Currently CUSE is used when running Linux kernel
drivers in user-space, which need to create a character device node to
communicate with its applications. CUSE has full support for almost
all devfs functionality found in the kernel:
- kevents
- read
- write
- ioctl
- poll
- open
- close
- mmap
- private per file handle data
Requested by several people. Also see "multimedia/cuse4bsd-kmod" in
ports.
or __POSIX_VISIBLE.
Whenever <sys/cdefs.h> sets __BSD_VISIBLE to non-zero, it also sets
__POSIX_VISIBLE and __XSI_VISIBLE to the newest version supported.
No functional change is intended.
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
device is an active kernel console and "off" otherwise. This is designed to
allow serial-booting x86 systems to provide a login prompt on the serial line
by default without providing one on all systems by default.
Comments and suggestions by: grehan, dteske, jilles
MFC after: 1 month
3-clause BSD license as specified by Oracle America, Inc. in 2010.
This license change was approved by Wim Coekaerts, Senior Vice
President, Linux and Virtualization at Oracle Corporation.
when there is an invalid character in the output codeset while it is
valid in the input. However, POSIX requires iconv() to perform an
implementation-defined conversion on the character. So, Citrus iconv converts
such a character to a special character which means it is invalid in the
output codeset.
This is not a problem in most cases but some software like libxml2 depends
on GNU's behavior to determine if a character is output as-is or another form
such as a character entity (&#NNN;).
FreeBSD systems usually implemented this as a third party module and
our implementation hasn't played as nicely with the old way as it could
have.
To that end:
* Rename the iconv* symbols in libc.so.7 to have a __bsd_ prefix.
* Provide .symver compatability with existing 10.x+ binaries that
referenced the iconv symbols. All existing binaries should work.
* Like on Linux/glibc systems, add a libc_nonshared.a to the ldscript
at /usr/lib/libc.so.
* Move the "iconv*" wrapper symbols to libc_nonshared.a
This should solve the runtime ambiguity about which symbols resolve
to where. If you compile against the iconv in libc, your runtime
dependencies will be unambiguous.
Old 9.x libraries and binaries will always resolve against their
libiconv.so.3 like they did on 9.x. They won't resolve against libc.
Old 10.x binaries will be satisified by the .symver helpers.
This should allow ports to selectively compile against the libiconv
port if needed and it should behave without ambiguity now.
Discussed with: kib
good. This caused libc to spoof the ports libiconv namespace and
provide a colliding libiconv.so.3 to fool rtld. This should have
been removed some time ago.
in net, to avoid compatibility breakage for no sake.
The future plan is to split most of non-kernel parts of
pfvar.h into pf.h, and then make pfvar.h a kernel only
include breaking compatibility.
Discussed with: bz
newvers.sh. Pass it in from include/Makefile. If it isn't passed in,
fall back to the old logic of using dirname $0.
Using dirname $0 does not yield the path to the script if it was
sourced in from another script in another directory; you end up with
the parent script's path. That was causing newvers.sh to look one
level below the FreeBSD src/ directory when building osreldate.h and it
may find something like a git or svn repo there that has nothing to do
with FreeBSD.
PR: 174422
Approved by: re ()
MFC after: 2 weeks
This would cause detection of old versions of SVN to cause fatal errors
instead of being caught and handled, which would make the build fail if
the tree had been checked out with an older version of SVN (e.g. 1.6).
Discussed with: gjb
Approved by: re (marius)
may come in from the environment and reflect the user's interactive shell.
Using bare "sh" is the dominant pattern in existing makefiles.
MFC this together with r255775.
Approved by: re ()
MFC after: 2 weeks
than launching the script directly and relying on #! to launch the shell.
This avoids problems when the source is mounted with the noexec flag.
MFC this together with r255775.
Approved by: re (kib)
MFC after: 2 weeks
newvers.sh into a temporary subshell with inline make rules.
Using a separate script fixes a variety of problems, including establishing
the correct dependencies in the makefiles. It also eliminates a problem
with the way newvers.sh uses `realpath $0`, because $0 expands differently
within a script sourced into a rule in a makefile depending on the version
of make and of /bin/sh being used. The latter can cause build breakage in a
cross-build environment, and can also make it difficult to compile 10.0 on
older pre-10.0 systems.
PR: 160646 174422
Submitted by: Garrett Cooper <yaneurabeya@gmail.com>
Approved by: re (gjb)
MFC after: 2 weeks
hrs@ provided this verison of the patch and showed me where all the needed
changes were to be made outside of gpioctl.c
Approved by: re (hrs)
MFC after: 2 weeks
function, but returns directory file descriptor instead of closing it.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by: Google Summer of Code 2013
I removed functionality not proposed for POSIX in Austin group issue #411.
A man page (my own) and test cases will follow in later commits.
PR: 176233
Submitted by: Jukka Ukkonen
extensions and also tried to be link time compatible with ports libiconv.
This splits that functionality and enables the parts that shouldn't
interfere with the port by default.
WITH_ICONV (now on by default) - adds iconv.h, iconv_open(3) etc.
WITH_LIBICONV_COMPAT (off by default) adds the libiconv_open etc API, linker
symbols and even a stub libiconv.so.3 that are good enough to be able
to 'pkg delete -f libiconv' on a running system and reasonably expect it
to work.
I have tortured many machines over the last few days to try and reduce
the possibilities of foot-shooting as much as I can. I've successfully
recompiled to enable and disable the libiconv_compat modes, ports that use
libiconv alongside system iconv etc. If you don't enable the
WITH_LIBICONV_COMPAT switch, they don't share symbol space.
This is an extension of behavior on other system. iconv(3) is a standard
libc interface and libiconv port expects to be able to run alongside it on
systems that have it.
Bumped osreldate.
but ACM formula we use have internal state (and return value) in the
[1, 0x7ffffffe] range, so our RAND_MAX (0x7fffffff) is never reached
because it is off by one, zero is not reached too.
Correct both RAND_MAX and rand(3) return value, shifting last one
to the 0 by 1 subtracted, resulting POSIXed [0, 0x7ffffffd(=new RAND_MAX)]
range.
2) Add a checks for not overflowing on too big seeds. It may happens on
the machines, where sizeof(unsigned int) > 32 bits.
Reviewed by: bde [1]
MFC after: 2 weeks
a macro with parameters. Remove a __DECONST hack and add consts instead
for gnu libiconv API compatability. This makes it work with things like
devel/boost-libs that expects to use "iconv" as though it were a pointer.
- Reconnect with some minor modifications, in particular now selsocket()
internals are adapted to use sbintime units after recent'ish calloutng
switch.
device names "md" or "md[0-9]*" and a "file" option are specified in
/etc/fstab like this:
md none swap sw,file=/swap.bin 0 0
- Add GBDE/GELI encrypted swap space specification support, which
rc.d/encswap supported. The /etc/fstab lines are like the following:
/dev/ada1p1.bde none swap sw 0 0
/dev/ada1p2.eli none swap sw 0 0
.eli devices accepts aalgo, ealgo, keylen, and sectorsize as options.
swapctl(8) can understand an encrypted device in the command line
like this:
# swapctl -a /dev/ada2p1.bde
- "-L" flag is added to support "late" option to defer swapon until
rc.d/mountlate runs.
- rc.d script change:
rc.d/encswap -> removed
rc.d/addswap -> just display a warning message if $swapfile is defined
rc.d/swap1 -> renamed to rc.d/swap
rc.d/swaplate -> newly added to support "late" option
These changes alleviate a race condition between device creation/removal
and swapon/swapoff.
MFC after: 1 week
Reviewed by: wblock (manual page)
implementations visible for use by applications. The functions $F that
are now weak symbols are:
allocm, calloc, dallocm, free, malloc, malloc_usable_size,
nallocm, posix_memalign, rallocm, realloc, sallocm
The non-weak implementations of $F are exported as __$F.
Submitted by: stevek@juniper.net
Reviewed by: jasone@, kib@
Approved by: jasone@ (jemalloc)
Obtained from: juniper Networks, Inc
It turns out that in C++11, char16_t and char32_t are built-in types;
language keywords. Just fix this by putting traditional _*_T_DECLARED
blocks around the definitions. We'll just predefine these in
<sys/_types.h>.
This also opens up the possibility to define char16_t in other header
files, if ever needed (e.g. if we would gain a <ctype.h> for
char16_t/char32_t).
The <uchar.h> header, part of C11, adds a small number of utility
functions for 16/32-bit "universal" characters, which may or may not be
UTF-16/32. As our wchar_t is already ISO 10646, simply add light-weight
wrappers around wcrtomb() and mbrtowc().
While there, also add (non-yet-standard) _l functions, similar to the
ones we already have for the other locale-dependent functions.
Reviewed by: theraven
The pipe2() function is similar to pipe() but allows setting FD_CLOEXEC and
O_NONBLOCK (on both sides) as part of the function.
If p points to two writable ints, pipe2(p, 0) is equivalent to pipe(p).
If the pointer is not valid, behaviour differs: pipe2() writes into the
array from the kernel like socketpair() does, while pipe() writes into the
array from an architecture-specific assembler wrapper.
Reviewed by: kan, kib
By using __has_extension(c_generic_selections), we can explicitly test
whether we're dealing with a version of Clang that supports _Generic().
That way we can use the improved <tgmath.h> code, even when not using
-std=c11. This massively reduces the compilation time when invoking
these functions.
This theoretically allows a compiler to optimize (parts of) the array
away if unused.
While there, make the array size implicit and use a _Static_assert() to
ensure that the definition matches up with the number of elements in the
list.
routines provide write-only stdio FILE objects that store their data in a
dynamically allocated buffer. They are a string builder interface somewhat
akin to a completely dynamic sbuf.
Reviewed by: bde, jilles (earlier versions)
MFC after: 1 month
values with those in <sys/time.h>. Otherwise, if a program includes
<time.h> before <sys/time.h>, the CLOCK_PROCESS_CPUTIME_ID macro never
gets defined.
Reviewed by: davidxu
X-MFC-With: 239347
NetBSD's. This output size limited versions of vis and unvis functions
as well as a set of vis variants that allow arbitrary characters to be
specified for encoding.
Finally, MIME Quoted-Printable encoding as described in RFC 2045 is
supported.
This adds two features:
* uid_from_user() and gid_from_group() as the reverse of user_from_uid()
and groups_from_gid().
* pwcache_userdb() and pwcache_groupdb() which allow alternative lookup
functions to be used. For example lookups from passwd and group
databases in a non-standard location.
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
GIANT from VFS. This code is particulary broken and fragile and other
in-kernel implementations around, found in other operating systems,
don't really seem clean and solid enough to be imported at all.
If someone wants to reconsider in-kernel NTFS implementation for
inclusion again, a fair effort for completely fixing and cleaning it
up is expected.
In the while NTFS regular users can use FUSE interface and ntfs-3g
port to work with their NTFS partitions.
This is not targeted for MFC.
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.
In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.
This is not targeted for MFC.
After further discussion, instead of pretending to use
uid_t and gid_t as upstream Solaris and linux try to, we
are better using u_int, which is in fact what the code
can handle and best approaches the range of values used
by uid and gid.
Discussed with: bde
Reviewed by: bde
- Evaluate the memory order argument in atomic_fetch_*_explicit macros.
- Implement atomic_store_explicit using atomic_exchange_explicit instead
of a plain assignment.
Reviewed by: theraven
MFC after: 2 weeks
The attempt to merge changes from the linux libtirpc caused
rpc.lockd to exit after startup under unclear conditions.
After many hours of selective experiments and inconsistent results
the conclusion is that it's better to just revert everything and
restart in a future time with a much smaller subset of the
changes.
____
MFC after: 3 days
Reported by: David Wolfskill
Tested by: David Wolfskill
- Replace do-while statements with void expressions.
- Wrap __asm statements in statement expressions.
- Make the macros function-like:
- Evaluate all arguments exactly once.
- Make sure there's a sequence point between evaluation of the arguments
and the function body. Arguments should be evaluated before any memory
barriers.
- Fix use of __atomic_is_lock_free built-in. It requires the address of
an atomic variable as second argument. Use this built-in on clang as
well because clang's __c11_atomic_is_lock_free only takes the size of the
variable into account.
- In atomic_exchange_explicit put the barrier before instead of after the
__sync_lock_test_and_set call.
Reviewed by: theraven
reside, and move there ipfw(4) and pf(4).
o Move most modified parts of pf out of contrib.
Actual movements:
sys/contrib/pf/net/*.c -> sys/netpfil/pf/
sys/contrib/pf/net/*.h -> sys/net/
contrib/pf/pfctl/*.c -> sbin/pfctl
contrib/pf/pfctl/*.h -> sbin/pfctl
contrib/pf/pfctl/pfctl.8 -> sbin/pfctl
contrib/pf/pfctl/*.4 -> share/man/man4
contrib/pf/pfctl/*.5 -> share/man/man5
sys/netinet/ipfw -> sys/netpfil/ipfw
The arguable movement is pf/net/*.h -> sys/net. There are
future plans to refactor pf includes, so I decided not to
break things twice.
Not modified bits of pf left in contrib: authpf, ftp-proxy,
tftp-proxy, pflogd.
The ipfw(4) movement is planned to be merged to stable/9,
to make head and stable match.
Discussed with: bz, luigi
__BEGIN_DECLS and __END_DECLS in cdefs.h take care of the
__cplusplus mangling issues so most of the definitions
were redundant.
In the few places where they were not redundant we should
use BSD style instead of the guards used upstream.
Reported by: Yuri Pankov
C++ mangling will cause trouble with variables like __rpc_xdr
in xdr.h so rename this to XDR.
While here add proper C++ guards to RPC headers.
PR: 137443
MFC after: 2 weeks
We especifically ignored the glibc compatibility changes
but this should help interaction with Solaris and Linux.
____
Fixed infinite loop in svc_run()
author Steve Dickson
Tue, 10 Jun 2008 12:35:52 -0500 (13:35 -0400)
Fixed infinite loop in svc_run()
____
__rpc_taddr2uaddr_af() assumes the netbuf to always have a
non-zero data. This is a bad assumption and can lead to a
seg-fault. This patch adds a check for zero length and returns
NULL when found.
author Steve Dickson
Mon, 27 Oct 2008 11:46:54 -0500 (12:46 -0400)
____
Changed clnt_spcreateerror() to return clearer
and more concise error messages.
author Steve Dickson
Thu, 20 Nov 2008 08:55:31 -0500 (08:55 -0500)
____
Converted all uid and gid variables of the type uid_t and gid_t.
author Steve Dickson
Wed, 28 Jan 2009 12:44:46 -0500 (12:44 -0500)
____
libtirpc: set r_netid and r_owner in __rpcb_findaddr_timed
These fields in the rpcbind GETADDR call are being passed uninitialized
to CLNT_CALL. In the case of x86_64 at least, this usually leads to a
segfault. On x86, it sometimes causes segfaults and other times causes
garbage to be sent on the wire.
rpcbind generally ignores the r_owner field for calls that come in over
the wire, so it really doesn't matter what we send in that slot. We just
need to send something. The reference implementation from Sun seems to
send a blank string. Have ours follow suit.
author Jeff Layton
Fri, 13 Mar 2009 11:44:16 -0500 (12:44 -0400)
____
libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the same
way.
author Jeff Layton
Fri, 13 Mar 2009 11:47:36 -0500 (12:47 -0400)
Obtained from: Bull GNU/Linux NFSv4 Project
MFC after: 3 weeks
In addition to testing against cxx_atomic, we must check c_atomic. The
former is only set when building C++ code. Also use __has_extension
instead of __has_feature. This allows us to use the atomics outside of
C11.
Reported by: Ariane van der Steldt <ariane stack nl>
PR: threads/170073
This is required for ARM EABI. Section 7.1.1 of the Procedure Call for the
ARM Architecture (AAPCS) defines wchar_t as either an unsigned int or an
unsigned short with the former preferred.
Because of this requirement we need to move the definition of __wchar_t to
a machine dependent header. It also cleans up the macros defining the limits
of wchar_t by defining __WCHAR_MIN and __WCHAR_MAX in the same machine
dependent header then using them to define WCHAR_MIN and WCHAR_MAX
respectively.
Discussed with: bde
thing it was still used for was to set the "global default" password
hash. Since the stock auth.conf contained nothing but comments, the
global default was actually the first algorithm in crypt(3)'s list,
which happens to be DES; I take the fact that nobody noticed as proof
that it was not used outside of crypt(3).
The only other use in our tree was in the Kerberos support code in
in tinyware's passwd(1). I removed that code in an earlier commit;
it would not have compiled anyway, as it only supported Kerberos IV.
The auth_getval() function is now a stub that always returns NULL,
which has the same effect as a functional auth_getval() with an
empty auth.conf.
MFC after: 3 weeks
Introduce dirfd() libc exported symbol replacing macro with same name,
preserve _dirfd() macro for internal use.
Replace dirp->dd_fd with dirfd() call. Avoid using dirfd as variable
name to prevent shadowing global symbol.
Sponsored by: Google Summer Of Code 2011
Since ino_t size is about to change to 64-bits, replace ino_t used in
dump protocol definition with 32-bit dump_ino_t to preserve backward
compatibility. At some point, it may be necessary to use spare fields
in struct in order to fully support 64-bit inode numbers.
Sponsored by: Google Summer of Code 2011
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
a c11 prefix to disambiguate them from the one provided by GCC.
Note: Clang 3.1 also supports the GCC builtins for libstdc++ 4.7 compatibility,
but I don't recommend using them because they are very poorly designed.
MFC after: 2 weeks
prior to 3.0.0 release) as contrib/jemalloc, and integrate it into libc.
The code being imported by this commit diverged from
lib/libc/stdlib/malloc.c in March 2010, which means that a portion of
the jemalloc 1.0.0 ChangeLog entries are relevant, as are the entries
for all subsequent releases.
would not compile anymore, due to plain 'inline' keywords. Fix this by
using __inline instead.
Reported by: Jia-Shiun Li <jiashiun@gmail.com>
Discussed with: theraven
The lang/gcc* ports patch headers where they think something is
non-standard. These patched headers override the system headers which means
you have to rebuild these ports whenever you do installworld to make sure
they contain the latest changes.
- Address performance regressions encountered by das@ by caching per-thread
data in TLS where available.
- Add a __NO_TLS flag to cdefs.h to indicate where not available.
- Reorganise the xlocale.h definitions into xlocale/*.h so that they can be
included from multiple places.
- Export the POSIX2008 subset of xlocale when POSIX2008 says it should be
exported, independently of whether xlocale.h is included.
- Fix the bug where programs using ctype functions always assumed ASCII unless
recompiled.
- Fix some style(9) violations.
Reviewed by: brooks (mentor)
Approved by: dim (mentor)